标题
Nanometric cutting: Mechanisms, practices and future perspectives
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 178, Issue -, Pages 103905
出版商
Elsevier BV
发表日期
2022-05-27
DOI
10.1016/j.ijmachtools.2022.103905
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Investigation on controlling diamond tool edge and wear by ultrasonic vibration
- (2021) Jinshi Wang et al. APPLIED ACOUSTICS
- Nanomechanical Scratching Induced Local Shear Deformation and Microstructural Evolution in Single Crystal Copper
- (2021) Mert Efe et al. APPLIED SURFACE SCIENCE
- Speed effect on the material behavior in high-speed scratching of BK7 glass
- (2021) Junyuan Feng et al. CERAMICS INTERNATIONAL
- Evolution of high-pressure metastable phase Si-XIII during silicon nanoindentation: A molecular dynamics study
- (2021) Lin Zhang et al. COMPUTATIONAL MATERIALS SCIENCE
- A strong basis for friction as the origin of size effect in cutting of metals
- (2021) Gan Feng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Revealing Nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy
- (2021) Dongdong Xu et al. ACTA MATERIALIA
- Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C–SiC in diamond cutting
- (2021) Liang Zhao et al. CERAMICS INTERNATIONAL
- In situ investigation of nanometric cutting of 3C-SiC using scanning electron microscope
- (2021) Dongyu Tian et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- High load sliding, deformation microstructures, strength, and hardening for cutting and metal forming
- (2021) Darcy A. Hughes et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface generation of tungsten carbide in laser-assisted diamond turning
- (2021) Kaiyuan You et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The removal mechanism and force modelling of gallium oxide single crystal in single grit grinding and nanoscratching
- (2021) Yongqiang Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Episodes of chip formation in micro-to-nanoscale cutting of Inconel 625
- (2021) M. Azizur Rahman et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental investigations on the laser-assisted machining of single crystal Si for optimal machining
- (2021) Yanjun Guo et al. OPTICS AND LASER TECHNOLOGY
- Molecular dynamics simulation study of interaction mechanism between grain boundaries and subgrain boundaries in nano-cutting
- (2021) Pengyue Zhao et al. Journal of Manufacturing Processes
- Investigation of nanoscratch anisotropy of C-plane sapphire wafer using friction force microscope
- (2021) Wangpiao Lin et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter
- (2021) Weihai Huang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Study on the processing outcomes of the atomic force microscopy tip-based nanoscratching on GaAs
- (2021) Jiqiang Wang et al. Journal of Manufacturing Processes
- Amorphization-governed elasto-plastic deformation under nanoindentation in cubic (3C) silicon carbide
- (2020) Liang Zhao et al. CERAMICS INTERNATIONAL
- Cutting of Al/Si bilayer systems: molecular dynamics study of twinning, phase transformation, and cracking
- (2020) Vardan Hoviki Vardanyan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nanocutting mechanism of 6H-SiC investigated by scanning electron microscope online observation and stress-assisted and ion implant-assisted approaches
- (2020) Zongwei Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Size Effects of Hardness and Strain Rate Sensitivity in Amorphous Silicon Measured by Nanoindentation
- (2020) Dariusz M. Jarząbek et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Early deformation mechanisms in the shear affected region underneath a copper sliding contact
- (2020) C. Haug et al. Nature Communications
- Molecular dynamic simulation of tool groove wear in nanoscale cutting of silicon
- (2020) Changlin Liu et al. AIP Advances
- Atomistic Simulation Study of Nanoparticle Effect on Nano-Cutting Mechanisms of Single-Crystalline Materials
- (2020) Pengyue Zhao et al. Micromachines
- Effects of anisotropy on single-crystal SiO2 in nano-metric cutting
- (2020) Jiaxuan Chen et al. Advances in Mechanical Engineering
- Label-free surface-enhanced Raman spectroscopy detection of absorption manner of lysozyme based on nanodots arrays
- (2020) Jiqiang Wang et al. APPLIED SURFACE SCIENCE
- Influence of vibration parameters on ultrasonic elliptical vibration cutting of reaction-bonded silicon carbide
- (2020) La Han et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper
- (2020) Zhanfeng Wang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon
- (2020) Xiao Chen et al. MATERIALS & DESIGN
- Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe
- (2020) Weihai Huang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Prediction of critical undeformed chip thickness for ductile mode to brittle transition in the cutting of single-crystal silicon
- (2020) Longxu Yao et al. SEMICONDUCTOR SCIENCE AND TECHNOLOGY
- Influence of the Rake Angle on Nanocutting of Fe Single Crystals: A Molecular-Dynamics Study
- (2020) Iyad Alabd Alhafez et al. Crystals
- Rake angle effect in cutting-based single atomic layer removal
- (2020) Wenkun Xie et al. Journal of Manufacturing Processes
- Modeling and analysis of tool wear mechanisms in diamond turning of copper beryllium alloy
- (2020) A. Sharma et al. Journal of Manufacturing Processes
- Study on nano-cutting of brittle material by molecular dynamics using dynamic modeling
- (2020) Jinshi Wang et al. COMPUTATIONAL MATERIALS SCIENCE
- Finite element simulation and experimental research on microcutting mechanism of single crystal silicon
- (2020) Bing Liu et al. The International Journal of Advanced Manufacturing Technology
- Ultraprecision laser-assisted diamond machining of single crystal Ge
- (2020) Hossein Shahinian et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Advances in laser assisted machining of hard and brittle materials
- (2020) Kaiyuan You et al. Journal of Manufacturing Processes
- Theoretical Modelling of Brittle-to-Ductile Transition Load of KDP Crystals on (001) Plane during Nanoindentation and Nanoscratch Tests
- (2020) Chen Li et al. Journal of Materials Research and Technology-JMR&T
- Applicability of cutting theory to nanocutting of metallic glasses: Atomistic simulation
- (2020) Karina E. Avila et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Experimental Investigation on Laser Assisted Diamond Turning of Binderless Tungsten Carbide by In-Process Heating
- (2020) Kaiyuan You et al. Micromachines
- Surface generation mechanism of monocrystalline materials under arbitrary crystal orientations in nanoscale cutting
- (2020) Huan Liu et al. Materials Today Communications
- Study on the crack formation mechanism in nano-cutting of gallium arsenide
- (2020) Chenghao Chen et al. APPLIED SURFACE SCIENCE
- Study on the surface damage mechanism of monocrystalline silicon in micro ball-end milling
- (2019) Minghui Yang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper
- (2019) Zhanfeng Wang et al. Journal of Manufacturing Processes
- Effects of tool wear on surface micro-topography in ultra-precision turning
- (2019) Dongxu Wu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal
- (2019) Chen Li et al. CERAMICS INTERNATIONAL
- Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools
- (2019) XinQuan Zhang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Microscale shear specimens for evaluating the shear deformation in single-crystal and nanocrystalline Cu and at Cu–Si interfaces
- (2019) Jonathan G. Gigax et al. JOURNAL OF MATERIALS RESEARCH
- Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications
- (2019) Shaojian Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Key machining characteristics in ultrasonic vibration cutting of single crystal silicon for micro grooves
- (2019) Jun-Yun Chen et al. Advances in Manufacturing
- Study on surface generation in nano-cutting by large-scale molecular dynamics simulation
- (2019) Feifei Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A numerical study on nanometric cutting mechanism of lutetium oxide single crystal
- (2019) Yue He et al. APPLIED SURFACE SCIENCE
- Nanoindentation and nanoscratch tests of YAG single crystals: An investigation into mechanical properties, surface formation characteristic, and theoretical model of edge-breaking size
- (2019) Chen Li et al. CERAMICS INTERNATIONAL
- Effect of ion implantation on material removal mechanism of 6H-SiC in nano-cutting: A molecular dynamics study
- (2019) Bing Liu et al. COMPUTATIONAL MATERIALS SCIENCE
- Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations
- (2019) Jianjian Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Freeform surface fabrication on hardened steel by double frequency vibration cutting
- (2019) Yanjie Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cross-sectional TEM study of subsurface damage in SPDT machining of germanium optics
- (2018) Dušan Korytár et al. APPLIED OPTICS
- Molecular dynamics research on ultra-high-speed grinding mechanism of monocrystalline nickel
- (2018) Jie Ren et al. APPLIED SURFACE SCIENCE
- A numerical study on the material removal and phase transformation in the nanometric cutting of silicon
- (2018) Jinshi Wang et al. APPLIED SURFACE SCIENCE
- Suppression of diamond tool wear in machining of tungsten carbide by combining ultrasonic vibration and electrochemical processing
- (2018) Xinquan Zhang et al. CERAMICS INTERNATIONAL
- Direct laser assisted machining with a sapphire tool for bulk metallic glass
- (2018) S.S. Park et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Orientation dependence in nanocutting of Fe single crystals: A molecular-dynamics study
- (2018) Iyad Alabd Alhafez et al. COMPUTATIONAL MATERIALS SCIENCE
- Molecular dynamics simulation and experiment research of cutting-tool wear mechanism for cutting aluminum alloy
- (2018) Guojun Dong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental study on size effect of tool edge and subsurface damage of single crystal silicon in nano-cutting
- (2018) Bing Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Repeated nanoscratch and double nanoscratch tests of Lu 2 O 3 transparent ceramics: Material removal and deformation mechanism, and theoretical model of penetration depth
- (2018) Chen Li et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Process parameter effects on residual stress and phase purity after microlaser-assisted machining of silicon
- (2018) Sean McCoy Langan et al. MATERIALS AND MANUFACTURING PROCESSES
- Integrated manufacture of a freeform off-axis multi-reflective imaging system without optical alignment
- (2018) Zexiao Li et al. OPTICS EXPRESS
- Study on machinability of silicon irradiated by swift ions
- (2018) Jinshi Wang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- AFM tip-based nanomachining with increased cutting speed at the tool-workpiece interface
- (2018) Yanquan Geng et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- 50 million atoms scale molecular dynamics modelling on a single consumer graphics card
- (2018) Gaobo Xiao et al. ADVANCES IN ENGINEERING SOFTWARE
- Implementation of AFM tip-based nanoscratching process on single crystal copper: Study of material removal state
- (2018) Yongda Yan et al. APPLIED SURFACE SCIENCE
- Topic Review: Application of Raman Spectroscopy Characterization in Micro/Nano-Machining
- (2018) Zongwei Xu et al. Micromachines
- Fabrication of Periodic Nanostructures Using AFM Tip-Based Nanomachining: Combining Groove and Material Pile-Up Topographies
- (2018) Yanquan Geng et al. Engineering
- Observed edge radius behavior during MD nanomachining of silicon at a high uncut chip thickness
- (2018) Lukman N. Abdulkadir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of crystallographic orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium
- (2018) Min Lai et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device
- (2018) Hongjin Jung et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials
- (2018) Weihai Huang et al. Journal of Manufacturing Processes
- Diamond cutting of micro-structure array on brittle material assisted by multi-ion implantation
- (2018) Jinshi Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigations on brittle-ductile cutting transition and crack formation in diamond cutting of mono-crystalline silicon
- (2017) Haitao Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo
- (2017) Mao Mukaida et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A molecular dynamics study on atomistic mechanisms of nano-scale cutting process of sapphire
- (2017) Woo Kyun Kim et al. Journal of Mechanical Science and Technology
- Molecular Dynamics Modeling and Simulation of Diamond Cutting of Cerium
- (2017) Junjie Zhang et al. Nanoscale Research Letters
- Anisotropy of Single-Crystal Silicon in Nanometric Cutting
- (2017) Zhiguo Wang et al. Nanoscale Research Letters
- Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting
- (2017) Min Lai et al. Nanoscale Research Letters
- Machining approach of freeform optics on infrared materials via ultra-precision turning
- (2017) Zexiao Li et al. OPTICS EXPRESS
- Fundamental investigation on partially overlapped nano-cutting of monocrystalline germanium
- (2017) Min Lai et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An edge reversal method for precision measurement of cutting edge radius of single point diamond tools
- (2017) Yuan-Liu Chen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A novel AFM-based 5-axis nanoscale machine tool for fabrication of nanostructures on a micro ball
- (2017) Yanquan Geng et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Molecular Dynamics Modeling and Simulation of Diamond Cutting of Cerium
- (2017) Junjie Zhang et al. Nanoscale Research Letters
- Anisotropy of Single-Crystal Silicon in Nanometric Cutting
- (2017) Zhiguo Wang et al. Nanoscale Research Letters
- Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting
- (2017) Min Lai et al. Nanoscale Research Letters
- Sculpturing of single crystal silicon microstructures by elliptical vibration cutting
- (2017) Jianguo Zhang et al. Journal of Manufacturing Processes
- Research of material removal and deformation mechanism for single crystal GGG (Gd 3 Ga 5 O 12 ) based on varied-depth nanoscratch testing
- (2017) Chen Li et al. MATERIALS & DESIGN
- Nanoindentation Induced Deformation and Pop-in Events in a Silicon Crystal: Molecular Dynamics Simulation and Experiment
- (2017) Sun Jiapeng et al. Scientific Reports
- Influence of microstructure on the cutting behaviour of silicon
- (2016) Saurav Goel et al. ACTA MATERIALIA
- Material removal mechanism of 6H-SiC studied by nano-scratching with Berkovich indenter
- (2016) Binbin Meng et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Molecular dynamics simulation of subnanometric tool-workpiece contact on a force sensor-integrated fast tool servo for ultra-precision microcutting
- (2016) Yindi Cai et al. APPLIED SURFACE SCIENCE
- Molecular dynamics study on nanometric cutting of ion implanted silicon
- (2016) Jinshi Wang et al. COMPUTATIONAL MATERIALS SCIENCE
- A molecular dynamics investigation into plastic deformation mechanism of nanocrystalline copper for different nanoscratching rates
- (2016) Jia Li et al. COMPUTATIONAL MATERIALS SCIENCE
- Subsurface deformation of germanium in ultra-precision cutting: characterization of micro-Raman spectroscopy
- (2016) Zexiao Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Diamond tool wear in ultra-precision machining
- (2016) S. J. Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cutting parameters on the ductile-brittle transition of single-crystal calcium fluoride during ultra-precision cutting
- (2016) Xiao Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Theoretical modelling and FE simulation on the oblique diamond turning of ZnS crystal
- (2016) W.J. Zong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A review of fly cutting applied to surface generation in ultra-precision machining
- (2016) S.J. Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluation for tool flank wear and its influences on surface roughness in ultra-precision raster fly cutting
- (2016) Guoqing Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crack propagation and the material removal mechanism of glass–ceramics by the scratch test
- (2016) Zhongjun Qiu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation
- (2016) Saeed Zare Chavoshi et al. Journal of Manufacturing Processes
- Subsurface defects structural evolution in nano-cutting of single crystal copper
- (2015) Quanlong Wang et al. APPLIED SURFACE SCIENCE
- The mechanism of ductile deformation in ductile regime machining of 6H SiC
- (2015) Gaobo Xiao et al. COMPUTATIONAL MATERIALS SCIENCE
- Theoretical and experimental investigation on the novel end-fly-cutting-servo diamond machining of hierarchical micro-nanostructures
- (2015) Zhiwei Zhu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Molecular dynamics modelling of brittle–ductile cutting mode transition: Case study on silicon carbide
- (2015) Gaobo Xiao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent advances in AFM tip-based nanomechanical machining
- (2015) Yongda Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effects of non-amorphizing hydrogen ion implantation on anisotropy in micro cutting of silicon
- (2015) G.B. Xiao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The mechanical properties of the scratched surface for silica glass by molecular dynamics simulation
- (2015) Xiaoguang Guo et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter
- (2015) Binbin Meng et al. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
- Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper
- (2015) Quanlong Wang et al. Nanoscale Research Letters
- Surface rippling induced by periodic instabilities on a polymer surface
- (2015) Enrico Gnecco et al. NEW JOURNAL OF PHYSICS
- An experimental study of cutting performance on monocrystalline germanium after ion implantation
- (2015) Jinshi Wang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Nanometric cutting in a scanning electron microscope
- (2015) Fengzhou Fang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting
- (2015) Jianguo Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper
- (2015) Quanlong Wang et al. Nanoscale Research Letters
- Experimental work on micro laser-assisted diamond turning of silicon (111)
- (2015) Hossein Mohammadi et al. Journal of Manufacturing Processes
- Atomistic-based predictions of crack tip behavior in silicon carbide across a range of temperatures and strain rates
- (2014) K.W.K. Leung et al. ACTA MATERIALIA
- Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy
- (2014) Peng-Zhe Zhu et al. APPLIED SURFACE SCIENCE
- Evolution of plasticity in nanometric cutting of Fe single crystals
- (2014) Yu Gao et al. APPLIED SURFACE SCIENCE
- Vibration assisted nano mechanical machining using AFM probe
- (2014) S.S. Park et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Multi-scale surface simulation of the KDP crystal fly cutting machining
- (2014) Wanqun Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond
- (2014) Jianguo Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Decrease of FIB-induced lateral damage for diamond tool used in nano cutting
- (2014) Wei Wu et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Development of micro milling tool made of single crystalline diamond for ceramic cutting
- (2013) H. Suzuki et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Damage-free machining of monocrystalline silicon carbide
- (2013) Hiroaki Tanaka et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Manufacturing and measurement of freeform optics
- (2013) F.Z. Fang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting
- (2013) S. To et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide
- (2013) Saurav Goel et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Micro cutting of V-shaped cylindrical grating template for roller nano-imprint
- (2013) Gonghao Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures
- (2013) Xiaokun Hu et al. OPTICS LETTERS
- Quasicontinuum analysis of the effect of tool geometry on nanometric cutting of single crystal copper
- (2013) Lin Zhang et al. OPTIK
- Study on nanometric cutting of germanium by molecular dynamics simulation
- (2013) Min Lai et al. Nanoscale Research Letters
- Nanoindentation-induced phase transformation and structural deformation of monocrystalline germanium: a molecular dynamics simulation investigation
- (2013) Min Lai et al. Nanoscale Research Letters
- Study on critical rake angle in nanometric cutting
- (2012) M. Lai et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Shear instability of nanocrystalline silicon carbide during nanometric cutting
- (2012) Saurav Goel et al. APPLIED PHYSICS LETTERS
- Atomic force microscopy based repeatable surface nanomachining for nanochannels on silicon substrates
- (2012) Zhuxin Dong et al. APPLIED SURFACE SCIENCE
- Multiscale simulations of nanoindentation and nanoscratch of single crystal copper
- (2012) Pengzhe Zhu et al. APPLIED SURFACE SCIENCE
- Crystallographic effect on subsurface damage formation in silicon microcutting
- (2012) Jiwang Yan et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Analysis of ductile mode and brittle transition of AFM nanomachining of silicon
- (2012) Seoung Hwan Lee INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A predictive model of the critical undeformed chip thickness for ductile–brittle transition in nano-machining of brittle materials
- (2012) Muhammad Arif et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Brittle–ductile transition during diamond turning of single crystal silicon carbide
- (2012) Saurav Goel et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- High-rate tunable ultrasonic force regulated nanomachining lithography with an atomic force microscope
- (2012) Li Zhang et al. NANOTECHNOLOGY
- Micro-machining
- (2012) E. Brinksmeier et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Ductile mode material removal and high-pressure phase transformation in silicon during micro-laser assisted machining
- (2012) Deepak Ravindra et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process
- (2012) Saurav Goel et al. TRIBOLOGY INTERNATIONAL
- Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon
- (2012) Saurav Goel et al. WEAR
- Nanometric cutting of single crystal silicon surfaces modified by ion implantation
- (2011) F.Z. Fang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation
- (2011) H.M. Pen et al. COMPUTATIONAL MATERIALS SCIENCE
- Nanochannel system fabricated by MEMS microfabrication and atomic force microscopy
- (2011) Z. Wang et al. IET Nanobiotechnology
- A study of the cutting performance of poly-crystalline oxygen free copper with single crystalline diamond micro-tools
- (2011) X. Ding et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Submicron functional surfaces generated by diamond machining
- (2010) E. Brinksmeier et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Slip-line field model of micro-cutting process with round tool edge effect
- (2010) Xiaoliang Jin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of micro DOE using micro tools shaped with focused ion beam
- (2010) Z. W. Xu et al. OPTICS EXPRESS
- Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting
- (2010) Norikazu Suzuki et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Precision and fast measurement of 3D cutting edge profiles of single point diamond micro-tools
- (2009) W. Gao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Digital microscope observation of the initial stage of cutting monocrystalline silicon
- (2009) T. Inamura et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Multi-scale simulation of the nano-metric cutting process
- (2009) Xizhi Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
- (2009) Chandra Nath et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanism for material removal in diamond turning of reaction-bonded silicon carbide
- (2009) Jiwang Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fabrication of a Single Metal Nanowire Connected with Dissimilar Metal Electrodes and Its Application to Chemical Sensing
- (2008) Hsin-Yu Lin et al. ANALYTICAL CHEMISTRY
- Design and testing of a long-range, precision fast tool servo system for diamond turning
- (2008) Stefan Rakuff et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining
- (2008) Jiwang Yan et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Nondestructive measurement of machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy
- (2007) Jiwang Yan et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started