Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands

Reduced atomic shadowing in HiPIMS: Role of the thermalized metal ions

(2018) João Carlos Oliveira et al.   APPLIED SURFACE SCIENCE

Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process

(2018) Mei-Jun Liu et al.   APPLIED SURFACE SCIENCE

Reactive bipolar pulsed dual magnetron sputtering of ZrN films: The effect of duty cycle

(2018) A. Rizzo et al.   APPLIED SURFACE SCIENCE

Optically transparent and durable Al2O3 coatings for harsh environments by ultra short pulsed laser deposition

(2018) Hannu Korhonen et al.   OPTICS AND LASER TECHNOLOGY

A comparative study of thick TiSiCN nanocomposite coatings deposited by dcMS and HiPIMS with and without PEMS assistance

(2018) Jianliang Lin et al.   SURFACE & COATINGS TECHNOLOGY

External magnetic field increases both plasma generation and deposition rate in HiPIMS

(2018) R. Ganesan et al.   SURFACE & COATINGS TECHNOLOGY

Deposition rate enhancement in HiPIMS through the control of magnetic field and pulse configuration

(2018) Vasile Tiron et al.   SURFACE & COATINGS TECHNOLOGY

Cu films prepared by bipolar pulsed high power impulse magnetron sputtering

(2018) Baohua Wu et al.   VACUUM

Influence of Thickness of Multilayered Nano-Structured Coatings Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrCrNbAl)N on Tool Life of Metal Cutting Tools at Various Cutting Speeds

(2018) Alexey Vereschaka et al.   Coatings

Nanocolumnar TiN thin film growth by oblique angle sputter-deposition: Experiments vs. simulations

(2018) Boudjemaa Bouaouina et al.   MATERIALS & DESIGN

Fluid dynamics and reaction assessment of diesel oil hydrotreating reactors via CFD

(2017) A.O. Silva et al.   FUEL PROCESSING TECHNOLOGY

Design and CFD modelling of the anodic chamber of a continuous PhotoFuelCell reactor for water treatment

(2017) Yi Wen Phuan et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Optimization of processing parameters of in-situ polymerization of pyrrole on woollen textile to improve its thermal conductivity

(2017) Subhankar Maity   PROGRESS IN ORGANIC COATINGS

The composition, structure and surface properties of the titanium-carbon coatings prepared by PVD technique

(2017) A.P. Rubshtein et al.   SURFACE & COATINGS TECHNOLOGY

Effect of nitrogen-argon flow ratio on the microstructural and mechanical properties of AlSiN thin films prepared by high power impulse magnetron sputtering

(2017) Xiurong Jiang et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure of gas flow sputtered thermal barrier coatings: Influence of bias voltage

(2017) N. Rösemann et al.   SURFACE & COATINGS TECHNOLOGY

Increasing the lifespan of high-pressure die cast molds subjected to severe wear

(2017) V. Nunes et al.   SURFACE & COATINGS TECHNOLOGY

High-rate deposition of thick (Cr,Al)ON coatings by high speed physical vapor deposition

(2017) K. Bobzin et al.   SURFACE & COATINGS TECHNOLOGY

Increasing the stamping tools lifespan by using Mo and B 4 C PVD coatings

(2017) L. Fernandes et al.   SURFACE & COATINGS TECHNOLOGY

Challenges in the industrial deposition of transparent conductive oxide materials by reactive magnetron sputtering from rotatable targets

(2017) Volker Linss   THIN SOLID FILMS

Synergistic enhancement effect between external electric and magnetic fields during high power impulse magnetron sputtering discharge

(2017) Chunwei Li et al.   VACUUM

Influence of N2/Ar Flow Ratio on Microstructure and Properties of the AlCrSiN Coatings Deposited by High-Power Impulse Magnetron Sputtering

(2017) Bai-Song Li et al.   Coatings

Interlayers Applied to CVD Diamond Deposition on Steel Substrate: A Review

(2017) Djoille Damm et al.   Coatings

Surface Texturing of CVD Diamond Assisted by Ultrashort Laser Pulses

(2017) Daniele Trucchi et al.   Coatings

Improving the Wear Resistance of Moulds for the Injection of Glass Fibre–Reinforced Plastics Using PVD Coatings: A Comparative Study

(2017) Francisco Silva et al.   Coatings

Mechanical and Thermal Properties of Epoxy Composites Containing Zirconium Oxide Impregnated Halloysite Nanotubes

(2017) et al.   Coatings

Effect of Microstructure on the Thermal Conductivity of Plasma Sprayed Y2O3 Stabilized Zirconia (8% YSZ)

(2017) Ningning Hu et al.   Coatings

Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

(2016) Agata Śliwa et al.   APPLIED SURFACE SCIENCE

Three-dimensional CFD simulation of industrial Claus reactors

(2016) Abdel-Samea Abdel-Fattah et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Control of Self-Organized Criticality through Adaptive Behavior of Nano-Structured Thin Film Coatings

(2016) German Fox-Rabinovich et al.   Entropy

Methodology for thermal design of solar tubular reactors using CFD techniques

(2016) Elvira Tapia et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Energy consumption and material fluxes in hard coating deposition processes

(2016) Martina Gassner et al.   SURFACE & COATINGS TECHNOLOGY

Variations in the cutting performance of PVD-coated tools in milling Ti6Al4V, explained through temperature-dependent coating properties

(2016) N. Michailidis   SURFACE & COATINGS TECHNOLOGY

Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools

(2016) G. Skordaris et al.   SURFACE & COATINGS TECHNOLOGY

Comparison of the large-area reactive sputter processes of ZnO:Al and ITO using industrial size rotatable targets

(2016) Volker Linss   SURFACE & COATINGS TECHNOLOGY

The improvement of high power impulse magnetron sputtering performance by an external unbalanced magnetic field

(2016) Chunwei Li et al.   VACUUM

Investigation of the self-healing sliding wear characteristics of NiTi-based PVD coatings on tool steel

(2016) Soroush Momeni et al.   WEAR

Experimental Verification of Statistically Optimized Parameters for Low-Pressure Cold Spray Coating of Titanium

(2016) Damilola Adebiyi et al.   Metals

Machining Duplex Stainless Steel: Comparative Study Regarding End Mill Coated Tools

(2016) Ronny Gouveia et al.   Coatings

Influence of bias voltage and oxygen flow rate on morphology and crystallographic properties of gas flow sputtered zirconia coatings

(2015) N. Rösemann et al.   SURFACE & COATINGS TECHNOLOGY

Effect of microstructure on mechanical and tribological properties of TiAlSiN nanocomposite coatings deposited by modulated pulsed power magnetron sputtering

(2015) Z.L. Wu et al.   THIN SOLID FILMS

Back-analyses of flow parameters of PVD improved soft Bangkok clay with and without vacuum preloading from settlement data and numerical simulations

(2014) P. Voottipruex et al.   GEOTEXTILES AND GEOMEMBRANES

A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)

(2014) André Anders   SURFACE & COATINGS TECHNOLOGY

Development of new PVD coatings for magnesium alloys with improved corrosion properties

(2014) Holger Hoche et al.   SURFACE & COATINGS TECHNOLOGY

Architecture of PVD coatings for metalcutting applications: A review

(2014) Aharon Inspektor et al.   SURFACE & COATINGS TECHNOLOGY

Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering

(2014) M. Arab Pour Yazdi et al.   VACUUM

Mechanical and Tribological Characterization of TiB2 Thin Films

(2013) F. J. G. Silva et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Wear Resistance of TiAlSiN Thin Coatings

(2013) F. J. G. Silva et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Industrial-scale sputter deposition of Cr1−xAlxN coatings with 0.21≤x≤0.74 from segmented targets

(2013) T. Weirather et al.   SURFACE & COATINGS TECHNOLOGY

Continuum and kinetic simulations of the neutral gas flow in an industrial physical vapor deposition reactor

(2013) Kirsten Bobzin et al.   SURFACE & COATINGS TECHNOLOGY

Enhanced ionization sputtering: A concept for superior industrial coatings

(2013) J. Alami et al.   SURFACE & COATINGS TECHNOLOGY

Characterization of laboratory and industrial CrN/CrCN/diamond-like carbon coatings

(2013) F.J.G. Silva et al.   THIN SOLID FILMS

High power impulse magnetron sputtering discharge

(2012) J. T. Gudmundsson et al.   JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A

Magnetron sputter deposition as visualized by Monte Carlo modeling

(2012) D. Depla et al.   THIN SOLID FILMS

(Cr1−xAlx)N: A comparison of direct current, middle frequency pulsed and high power pulsed magnetron sputtering for injection molding components

(2012) N. Bagcivan et al.   THIN SOLID FILMS

Recent advances in modulated pulsed power magnetron sputtering for surface engineering

(2011) Jianliang Lin et al.   JOM

TiB2 Nanostructured Coating for GFRP Injection Moulds

(2011) R. P. Martinho et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Ar + H2 plasma etching for improved adhesion of PVD coatings on steel substrates

(2011) Harish C. Barshilia et al.   VACUUM

Adhesion and Wear Behaviour of NCD Coatings on Si3N4 by Micro-Abrasion Tests

(2009) F. G. Silva et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

A FEM-based analytical–experimental method for determining strength properties gradation in coatings after micro-blasting

(2009) K.-D. Bouzakis et al.   SURFACE & COATINGS TECHNOLOGY

Micro-abrasion wear behaviour of TiAlCrSiN nanostructured coatings

(2009) R.P. Martinho et al.   WEAR

High power pulsed magnetron sputtering: Fundamentals and applications

(2008) J. Alami et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining

(2008) R.P. Martinho et al.   VACUUM

Articulation of sustainability in the emerging field of nanocoatings

(2007) H. van Lente et al.   JOURNAL OF CLEANER PRODUCTION