A review of simulation and experiment research on cutting mechanism and cutting force in nanocutting process
出版年份 2022 全文链接
标题
A review of simulation and experiment research on cutting mechanism and cutting force in nanocutting process
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume 121, Issue 3-4, Pages 1533-1574
出版商
Springer Science and Business Media LLC
发表日期
2022-06-16
DOI
10.1007/s00170-022-09051-0
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Towards understanding the machining mechanism of the atomic force microscopy tip-based nanomilling process
- (2021) Jiqiang Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Top-down nanofabrication approaches toward single-digit-nanometer scale structures
- (2021) Dong Kyo Oh et al. Journal of Mechanical Science and Technology
- Surface formation and damage mechanisms of nano-ZrO2 ceramics under axial ultrasonic-assisted grinding
- (2021) Yanyan Yan et al. Journal of Mechanical Science and Technology
- Atomic force microscopy nanoindentation kinetics and subsurface visualization of soft inhomogeneous polymer
- (2021) Ilya A. Morozov MICROSCOPY RESEARCH AND TECHNIQUE
- Tool wear mechanisms of PcBN in machining Inconel 718: Analysis across multiple length scale
- (2021) Volodymyr Bushlya et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fundamental study on material removal mechanism in single-crystal germanium
- (2021) Ruiwen Geng et al. INFRARED PHYSICS & TECHNOLOGY
- The material removal and the nanometric surface characteristics formation mechanism of TiC/Ni cermet in ultra-precision grinding
- (2021) Yandan Zhu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Development of a force controlled nanocutting system using a flexible mechanism for adaptive cutting of microstructures on non-planar surfaces
- (2021) Zhongwei Li et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Evaluation of the clean nano-cutting fluid by considering the tribological performance and cost parameters
- (2021) Enes Kilincarslan et al. TRIBOLOGY INTERNATIONAL
- Chip formation mechanism in machining of Al/SiCp composites based on analysis of particle damage
- (2021) Wei Sun et al. Journal of Manufacturing Processes
- The removal mechanism and force modelling of gallium oxide single crystal in single grit grinding and nanoscratching
- (2021) Yongqiang Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Material removal mechanism of FCC single-crystalline materials at nano-scales: Chip removal & ploughing
- (2021) Huan Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Molecular dynamics simulation study of interaction mechanism between grain boundaries and subgrain boundaries in nano-cutting
- (2021) Pengyue Zhao et al. Journal of Manufacturing Processes
- Investigation of the effect of residual stresses in the subsurface on process forces for consecutive orthogonal cuts
- (2021) F. Wöste et al. Production Engineering-Research and Development
- Numerical Computation and Analysis of Cutting Forces during Nanometric Scratching of Silicon Carbide
- (2021) Borad M. Barkachary et al. Journal of The Institution of Engineers (India): Series C
- Study on the processing outcomes of the atomic force microscopy tip-based nanoscratching on GaAs
- (2021) Jiqiang Wang et al. Journal of Manufacturing Processes
- Dual-Mode On-to-Off Modulation of Plasmon-Induced Transparency and Coupling Effect in Patterned Graphene-Based Terahertz Metasurface
- (2020) Zhimin Liu et al. Nanoscale Research Letters
- Atomistic Simulation Study of Nanoparticle Effect on Nano-Cutting Mechanisms of Single-Crystalline Materials
- (2020) Pengyue Zhao et al. Micromachines
- Molecular dynamics study on deformation behaviour of monocrystalline GaN during nano abrasive machining
- (2020) Yongqiang Wang et al. APPLIED SURFACE SCIENCE
- Effects of cutting parameters on the subsurface damage of single crystal copper during nanocutting process
- (2020) Ping Zhang et al. VACUUM
- Subsurface damage and phase transformation in laser-assisted nanometric cutting of single crystal silicon
- (2020) Xiao Chen et al. MATERIALS & DESIGN
- Subsurface chemical nanoidentification by nano-FTIR spectroscopy
- (2020) Lars Mester et al. Nature Communications
- Current understanding of surface effects in microcutting
- (2020) Yan Jin Lee et al. MATERIALS & DESIGN
- Numerical and experimental investigation on ductile deformation and subsurface defects of monocrystalline silicon during nano-scratching
- (2020) Bing Liu et al. APPLIED SURFACE SCIENCE
- Study on nano-cutting of brittle material by molecular dynamics using dynamic modeling
- (2020) Jinshi Wang et al. COMPUTATIONAL MATERIALS SCIENCE
- Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale
- (2020) Qi Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface generation mechanism of monocrystalline materials under arbitrary crystal orientations in nanoscale cutting
- (2020) Huan Liu et al. Materials Today Communications
- Study on the crack formation mechanism in nano-cutting of gallium arsenide
- (2020) Chenghao Chen et al. APPLIED SURFACE SCIENCE
- Research on the nanocutting mechanism of Ni-Fe-Cr-based superalloys: Conventional cutting versus UEVC
- (2020) Ping Zhang et al. Materials Today Communications
- A molecular dynamics simulation of wear mechanism of diamond tool in nanoscale cutting of copper beryllium
- (2019) A. Sharma et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Meshless Methods for the Simulation of Machining and Micro-machining: A Review
- (2019) Angelos P. Markopoulos et al. ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
- Molecular dynamics simulation of dislocation evolution and surface mechanical properties on polycrystalline copper
- (2019) Haitao Liu et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Investigation of material flow behaviour and chip formation mechanism during grinding of glass-ceramics by nanoscratch
- (2019) Xue Yang et al. CERAMICS INTERNATIONAL
- Deformation mechanisms under nanoscratching of Si: effect of scratching speed, load and indenter orientation
- (2019) Olga Shikimaka et al. Materials Research Express
- Elastic–plastic deformation of single-crystal silicon in nano-cutting by a single-tip tool
- (2019) Ning Huang et al. JAPANESE JOURNAL OF APPLIED PHYSICS
- Molecular Dynamics Investigation of Nanometric Cutting of Single-Crystal Silicon Using a Blunt Tool
- (2019) Seyed Nader Ameli Kalkhoran et al. JOM
- Effect of Fluid Media on Material Removal and Subsurface Defects Evolution of Monocrystal Copper in Nano-Cutting Process
- (2019) Quanlong Wang et al. Nanoscale Research Letters
- Characterization of Deformation and Wear Mechanisms During Indentation Scratching on Pure Zinc
- (2019) Aditya Gokhale et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Scratch on Polymer Materials Using AFM Tip-Based Approach: A Review
- (2019) Yongda Yan et al. Polymers
- Amorphization and dislocation evolution mechanisms of single crystalline 6H-SiC
- (2019) Zhonghuai Wu et al. ACTA MATERIALIA
- Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper
- (2019) Wenkun Xie et al. APPLIED SURFACE SCIENCE
- Effect of tool edge radius on material removal mechanism in atomic and close-to-atomic scale cutting
- (2019) Wenkun Xie et al. APPLIED SURFACE SCIENCE
- A numerical study on nanometric cutting mechanism of lutetium oxide single crystal
- (2019) Yue He et al. APPLIED SURFACE SCIENCE
- Research on mechanism of nanoscale cutting with arc trajectory for monocrystalline silicon based on molecular dynamics simulation
- (2019) Qiang Kang et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of Machining-Induced Subsurface Defects on Dislocation Evolution and Mechanical Properties of Materials via Nano-indentation
- (2019) Quanlong Wang et al. Nanoscale Research Letters
- Atomic-scale study of vacancy defects in SiC affecting on removal mechanisms during nano-abrasion process
- (2019) Piao Zhou et al. TRIBOLOGY INTERNATIONAL
- A numerical study on the material removal and phase transformation in the nanometric cutting of silicon
- (2018) Jinshi Wang et al. APPLIED SURFACE SCIENCE
- Atomic-scale etching of hexagonal boron nitride for device integration based on two-dimensional materials
- (2018) Hamin Park et al. Nanoscale
- Prediction of friction coefficients in nanoscratch testing of metals based on material flow lines
- (2018) Hamid R. Chamani et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Material specific nanoscratch ploughing friction coefficient
- (2018) Adam H. Carreon et al. TRIBOLOGY INTERNATIONAL
- Topic Review: Application of Raman Spectroscopy Characterization in Micro/Nano-Machining
- (2018) Zongwei Xu et al. Micromachines
- Scratching of silicon surfaces
- (2018) M. Budnitzki et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- On understanding the microstructure of SiC/SiC Ceramic Matrix Composites (CMCs) after a material removal process
- (2018) O. Gavalda Diaz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of crystallographic orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium
- (2018) Min Lai et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Study on ductile mode machining of single-crystal silicon by mechanical machining
- (2017) Dae-Hee Choi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties
- (2017) M. Azizur Rahman et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory
- (2017) Yanquan Geng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fundamental investigation on partially overlapped nano-cutting of monocrystalline germanium
- (2017) Min Lai et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A study on the surface quality and brittle–ductile transition during the elliptical vibration-assisted nanocutting process on monocrystalline silicon via molecular dynamic simulations
- (2017) Bo Zhu et al. RSC Advances
- Modeling of the dynamic machining force of vibration-assisted nanomachining process
- (2017) Xiangcheng Kong et al. Journal of Manufacturing Processes
- Effect of Machining Parameters on the Cutting Force and Microstructure in Nanometric Cutting of Cu50Zr50 Metallic Glass
- (2016) Yan Zhao et al. Current Nanoscience
- Review of micro/nano machining by utilizing elliptical vibration cutting
- (2016) Jianguo Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On the mechanism of asymmetric ductile–brittle transition in microcutting of (111) CaF 2 single crystals
- (2016) H. Wang et al. SCRIPTA MATERIALIA
- Nano-machining of materials: understanding the process through molecular dynamics simulation
- (2016) Dan-Dan Cui et al. Advances in Manufacturing
- Subsurface defects structural evolution in nano-cutting of single crystal copper
- (2015) Quanlong Wang et al. APPLIED SURFACE SCIENCE
- Novel end-fly-cutting-servo system for deterministic generation of hierarchical micro–nanostructures
- (2015) Suet To et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A review of machine-tool vibration and its influence upon surface generation in ultra-precision machining
- (2015) S.J. Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Molecular dynamics modelling of brittle–ductile cutting mode transition: Case study on silicon carbide
- (2015) Gaobo Xiao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent advances in AFM tip-based nanomechanical machining
- (2015) Yongda Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Electrochemical Reaction in Single Layer MoS2: Nanopores Opened Atom by Atom
- (2015) J. Feng et al. NANO LETTERS
- Atomic Scale Plasmonic Switch
- (2015) Alexandros Emboras et al. NANO LETTERS
- Nanoimprinting Techniques for Large-Area Three-Dimensional Negative Index Metamaterials with Operation in the Visible and Telecom Bands
- (2014) Li Gao et al. ACS Nano
- Low-Cost, Flexible, and Self-Cleaning 3D Nanocone Anti-Reflection Films for High-Efficiency Photovoltaics
- (2014) Kwong-Hoi Tsui et al. ADVANCED MATERIALS
- Evolution of plasticity in nanometric cutting of Fe single crystals
- (2014) Yu Gao et al. APPLIED SURFACE SCIENCE
- A review of non-contact micro- and nano-printing technologies
- (2014) Changhai Ru et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- The current understanding on the diamond machining of silicon carbide
- (2014) Saurav Goel JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Fabrication of sub-20 nm nano-gap structures through the elastomeric nano-stamp assisted secondary sputtering phenomenon
- (2014) Hwan-Jin Jeon et al. Nanoscale
- The study on the nanomachining property and cutting model of single-crystal sapphire by atomic force microscopy
- (2014) Jen-Ching Huang et al. SCANNING
- MD simulation of nanometric cutting of copper with and without water lubrication
- (2014) YunHui Chen et al. Science China-Technological Sciences
- Fabrication of nanochannels with ladder nanostructure at the bottom using AFM nanoscratching method
- (2014) Yongda Yan et al. Nanoscale Research Letters
- A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide
- (2013) Saurav Goel et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Studies of the ductile mode of cutting brittle materials (A review)
- (2013) A. M. Kovalchenko Journal of Superhard Materials
- Planar Photonics with Metasurfaces
- (2013) A. V. Kildishev et al. SCIENCE
- Development of micro milling force model and cutting parameter optimization
- (2013) Shih-ming WANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Modelling the surface generation process during AFM probe-based machining: simulation and experimental validation
- (2013) A Elkaseer et al. Surface Topography-Metrology and Properties
- Atomic force microscopy based repeatable surface nanomachining for nanochannels on silicon substrates
- (2012) Zhuxin Dong et al. APPLIED SURFACE SCIENCE
- Research on the effects of machining-induced subsurface damages on mono-crystalline silicon via molecular dynamics simulation
- (2012) Hongwei Zhao et al. APPLIED SURFACE SCIENCE
- Friction at the tool–chip interface during orthogonal nanometric machining
- (2012) P A Romero et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation
- (2011) H.M. Pen et al. COMPUTATIONAL MATERIALS SCIENCE
- Cutting performance of nano-polycrystalline diamond
- (2011) K. Harano et al. DIAMOND AND RELATED MATERIALS
- Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon
- (2011) Saurav Goel et al. MATERIALS LETTERS
- Advancements and challenges in development of atomic force microscopy for nanofabrication
- (2011) Ampere A. Tseng Nano Today
- Design and evaluation of a mechanical nanomanufacturing system for nanomilling
- (2011) B. Arda Gozen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Mechanism of Abrasive Wear in Nanomachining
- (2011) Sumaiya Islam et al. TRIBOLOGY LETTERS
- Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting
- (2011) Saurav Goel et al. Nanoscale Research Letters
- Research on the atomic force microscopy-based fabrication of nanochannels on silicon oxide surfaces
- (2010) ZhiQian Wang et al. CHINESE SCIENCE BULLETIN
- Tip-based nanomanufacturing by electrical, chemical, mechanical and thermal processes
- (2010) A.P. Malshe et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Nanomachining of Permalloy for Fabricating Nanoscale Ferromagnetic Structures Using Atomic Force Microscopy
- (2010) Ampere A. Tseng et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Multi-scale simulation of the nano-metric cutting process
- (2009) Xizhi Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric machining
- (2009) W.J. Zong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- New approach to estimate nanowear test results through nanoindentation test
- (2009) M.A. Ekwińska et al. MICROELECTRONIC ENGINEERING
- Friction-induced nanofabrication on monocrystalline silicon
- (2009) Bingjun Yu et al. NANOTECHNOLOGY
- Research on three dimensional machining effects using atomic force microscope
- (2009) Yao-Ting Mao et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Molecular dynamics study of groove fabrication process using AFM-based nanometric cutting technique
- (2008) Junjie Zhang et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Cutting force model considering tool edge geometry for micro end milling process
- (2008) Ik Soo Kang et al. Journal of Mechanical Science and Technology
- A study of the estimation method of the cutting force for a conical tool under nanoscale depth of cut by molecular dynamics
- (2008) Zone-Ching Lin et al. NANOTECHNOLOGY
- Molecular dynamics simulations of diffusion of carbon into iron
- (2008) R. Narulkar et al. PHILOSOPHICAL MAGAZINE
- The influence of different cutting speeds on the cutting force and strain–stress behaviors of single crystal copper during nano-scale orthogonal cutting
- (2007) Zone-Ching Lin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Interatomic potentials of the binary transition metal systems and some applications in materials physics
- (2007) J.H. Li et al. PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started