Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches

High-Throughput High-Resolution Digital Image Correlation Measurements by Multi-Beam SEM Imaging

(2023) R. L. Black et al.   EXPERIMENTAL MECHANICS

Dislocation cells in additively manufactured metallic alloys characterized by electron backscatter diffraction pattern sharpness

(2023) Fulin Wang et al.   MATERIALS CHARACTERIZATION

Extensive 3D mapping of dislocation structures in bulk aluminum

(2023) Can Yildirim et al.   Scientific Reports

Slip activity during low-stress cold creep deformation in a near-α titanium alloy

(2022) Claudius Dichtl et al.   ACTA MATERIALIA

Mild-to-wild plastic transition is governed by athermal screw dislocation slip in bcc Nb

(2022) Q. Rizzardi et al.   Nature Communications

Development of grain-scale slip activity and lattice rotation fields in Inconel 718

(2022) Jonathan M. Hestroffer et al.   ACTA MATERIALIA

The localization of plastic deformation in the precipitate free zone of an Al-Mg-Si-Mn alloy

(2022) M. Mansouri Arani et al.   ACTA MATERIALIA

High‐Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

(2022) Alexander Jelinek et al.   ADVANCED ENGINEERING MATERIALS

Twin boundary fatigue crack nucleation in a polycrystalline Nickel superalloy containing non-metallic inclusions

(2022) Alexander Bergsmo et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Observation of bulk plasticity in a polycrystalline titanium alloy by diffraction contrast tomography and topotomography

(2022) J.C. Stinville et al.   MATERIALS CHARACTERIZATION

Orientation dependent plastic localization in the refractory high entropy alloy HfNbTaTiZr at room temperature

(2022) M.A. Charpagne et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

4D microstructural evolution in a heavily deformed ferritic alloy: A new perspective in recrystallisation studies

(2022) C. Yildirim et al.   SCRIPTA MATERIALIA

Digital Twins for Materials

(2022) Surya R. Kalidindi et al.   Frontiers in Materials

Correlated subgrain and particle analysis of a recovered Al Mn alloy by directly combining EBSD and backscatter electron imaging

(2022) Håkon W. Ånes et al.   MATERIALS CHARACTERIZATION

Multi-modal Dataset of a Polycrystalline Metallic Material: 3D Microstructure and Deformation Fields

(2022) J. C. Stinville et al.   Scientific Data

Mapping pure plastic strains against locally applied stress: Revealing toughening plasticity

(2022) Thomas E. J. Edwards et al.   Science Advances

Intermittent microplasticity in the presence of a complex microstructure

(2022) Q. Rizzardi et al.   Physical Review Materials

In situ characterisation of the strain fields of intragranular slip bands in ferrite by high-resolution electron backscatter diffraction

(2022) Abdalrhaman Koko et al.   ACTA MATERIALIA

Subgrain geometrically necessary dislocation density mapping in spalled Ta in three dimensions

(2022) Wyatt A. Witzen et al.   ACTA MATERIALIA

A Nanomechanical Testing Framework Yielding Front&Rear-Sided, High-Resolution, Microstructure-Correlated SEM-DIC Strain Fields

(2022) T. Vermeij et al.   EXPERIMENTAL MECHANICS

On the origins of fatigue strength in crystalline metallic materials

(2022) J. C. Stinville et al.   SCIENCE

Automated identification of slip system activity fields from digital image correlation data

(2022) T. Vermeij et al.   ACTA MATERIALIA

Characterizing defect structures in AM steel using direct electron detection EBSD

(2022) Josh Kacher et al.   SCRIPTA MATERIALIA

Nanoindentation in multi-modal map combinations: a correlative approach to local mechanical property assessment

(2021) Christopher M. Magazzeni et al.   JOURNAL OF MATERIALS RESEARCH

Review on Strain Localization Phenomena Studied by High‐Resolution Digital Image Correlation

(2021) Anja Weidner et al.   ADVANCED ENGINEERING MATERIALS

Comparison of EBSD, DIC, AFM, and ECCI for active slip system identification in deformed Ti-7Al

(2021) Ryan Sperry et al.   MATERIALS CHARACTERIZATION

Effect of Neighboring Grain Orientation on Strain Localization in Slip Bands in HCP Materials

(2021) Behnam Ahmadikia et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Correction of artefacts associated with large area EBSD

(2021) B. Winiarski et al.   ULTRAMICROSCOPY

Revealing the relation between microstructural heterogeneities and local mechanical properties of complex-phase steel by correlative electron microscopy and nanoindentation characterization

(2021) Yuling Chang et al.   MATERIALS & DESIGN

Microstructural signatures of dislocation avalanches in a high-entropy alloy

(2021) Q. Rizzardi et al.   Physical Review Materials

Slip localization in Inconel 718: A three-dimensional and statistical perspective

(2021) M.A. Charpagne et al.   ACTA MATERIALIA

Efficient Experimental and Data-Centered Workflow for Microstructure-Based Fatigue Data

(2021) A. R. Durmaz et al.   EXPERIMENTAL MECHANICS

The effect of temperature on slip in microtextured Ti-6Al-2Sn-4Zr-2Mo under dwell fatigue

(2021) M.E. Harr et al.   INTERNATIONAL JOURNAL OF FATIGUE

The Alignment and Fusion of Multimodal 3D Serial Sectioning Datasets

(2021) L. T. Nguyen et al.   JOM

Advances in Multimodal Characterization of Structural Materials

(2021) Andrew T. Polonsky et al.   JOM

Intragranular strain estimation in far-field scanning X-ray diffraction using a Gaussian process

(2021) Axel Henningsson et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

In situ visualization of long-range defect interactions at the edge of melting

(2021) Leora E. Dresselhaus-Marais et al.   Science Advances

Strain localization and fatigue crack formation at (0001) twist boundaries in titanium alloys

(2021) S. Hémery et al.   ACTA MATERIALIA

In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: Slip mechanisms, strain localization, and partitioning

(2021) Shaolou Wei et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Recent Developments in Femtosecond Laser-Enabled TriBeam Systems

(2021) McLean P. Echlin et al.   JOM

A Multi-modal Data Merging Framework for Correlative Investigation of Strain Localization in Three Dimensions

(2021) M.A. Charpagne et al.   JOM

Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

(2021) S. Zeisl et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Plasticity, localization, and damage in ferritic-pearlitic steel studied by nanoscale digital image correlation

(2021) T. Vermeij et al.   SCRIPTA MATERIALIA

Modeling lattice rotation fields from discrete crystallographic slip bands in superalloys

(2021) Marat I. Latypov et al.   Extreme Mechanics Letters

Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718

(2020) Wyatt A. Witzen et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Local microstructure and micromechanical stress evolution during deformation twinning in hexagonal polycrystals

(2020) Mariyappan Arul Kumar et al.   JOURNAL OF MATERIALS RESEARCH

Scale-dependent pop-ins in nanoindentation and scale-free plastic fluctuations in microcompression

(2020) John Shimanek et al.   JOURNAL OF MATERIALS RESEARCH

Does the stacking fault energy affect dislocation multiplication?

(2020) Juan Li et al.   MATERIALS CHARACTERIZATION

Intragranular three-dimensional stress tensor fields in plastically deformed polycrystals

(2020) Yujiro Hayashi et al.   SCIENCE

Reconstructing intragranular strain fields in polycrystalline materials from scanning 3DXRD data

(2020) N. Axel Henningsson et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Plate-like precipitate effects on plasticity of Al-Cu alloys at micrometer to sub-micrometer scales

(2020) Peng Zhang et al.   MATERIALS & DESIGN

The effect of solid solution and gamma prime on the deformation modes in Ni-based superalloys

(2020) Allan Harte et al.   ACTA MATERIALIA

New opportunities at the Materials Science Beamline at ESRF to exploit high energy nano-focus X-ray beams

(2020) Jonathan Wright et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Serial sectioning in the SEM for three dimensional materials science

(2020) McLean P. Echlin et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Automated and quantitative analysis of plastic strain localization via multi-modal data recombination

(2020) M.A. Charpagne et al.   MATERIALS CHARACTERIZATION

Micro-compression studies of face-centered cubic and body-centered cubic high-entropy alloys: Size-dependent strength, strain rate sensitivity, and activation volumes

(2020) Yuan Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Extraction of mechanical properties of materials through deep learning from instrumented indentation

(2020) Lu Lu et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

X-Ray Topography-More than Nice Pictures

(2020) Andreas N. Danilewsky   CRYSTAL RESEARCH AND TECHNOLOGY

Characterization of Microstructure in Additively Manufactured 316L using Automated Serial Sectioning

(2020) David J. Rowenhorst et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

In situ 4D mechanical testing of structural materials: The data challenge

(2020) Henry Proudhon et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Time-Resolved Digital Image Correlation in the Scanning Electron Microscope for Analysis of Time-Dependent Mechanisms

(2020) J.C. Stinville et al.   EXPERIMENTAL MECHANICS

The impact of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum

(2020) M.A. Linne et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Twin related domain networks in René 88DT

(2020) William C. Lenthe et al.   MATERIALS CHARACTERIZATION

Measurement of local plastic strain during uniaxial reversed loading of nickel alloy 625

(2020) Michael D. Atkinson et al.   MATERIALS CHARACTERIZATION

Grain boundary slip transfer classification and metric selection with artificial neural networks

(2020) Zhuowen Zhao et al.   SCRIPTA MATERIALIA

Quantifying microscale drivers for fatigue failure via coupled synchrotron X-ray characterization and simulations

(2020) Sven Gustafson et al.   Nature Communications

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

(2020) Georgios Konstantopoulos et al.   MATERIALS & DESIGN

X-ray orientation microscopy using topo-tomography and multi-mode diffraction contrast tomography

(2020) Nicola Viganò et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Multiplicity of dislocation pathways in a refractory multiprincipal element alloy

(2020) Fulin Wang et al.   SCIENCE

High resolution digital image correlation mapping of strain localization upon room and high temperature, high cycle fatigue of a TiAl intermetallic alloy

(2020) Thomas Edward James Edwards et al.   INTERNATIONAL JOURNAL OF FATIGUE

Evidence of room-temperature shear-deformation in a Cu-Al intermetallic

(2020) Y. Ikeda et al.   SCRIPTA MATERIALIA

Electron backscattered diffraction using a new monolithic direct detector: High resolution and fast acquisition

(2020) Fulin Wang et al.   ULTRAMICROSCOPY

A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel

(2020) D. Liang et al.   ACTA MATERIALIA

Fine granular area linked to very high cycle fatigue in martensitic and bainitic steels: Characterization by means of EBSD-dictionary indexing

(2020) Lucia Morales-Rivas et al.   SCRIPTA MATERIALIA

TrueEBSD: Correcting spatial distortions in electron backscatter diffraction maps

(2020) Vivian S. Tong et al.   ULTRAMICROSCOPY

Effects of orientation and pre-deformation on velocity profiles of dislocation avalanches in gold microcrystals

(2019) Gregory Sparks et al.   EUROPEAN PHYSICAL JOURNAL B

Intermittent plasticity in individual grains: A study using high energy x-ray diffraction

(2019) K. Chatterjee et al.   Structural Dynamics

Mapping of individual dislocations with dark-field X-ray microscopy

(2019) A. C. Jakobsen et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al

(2019) T.R. Bieler et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A Robust Patterning Technique for Electron Microscopy-Based Digital Image Correlation at Sub-Micron Resolutions

(2019) C.B. Montgomery et al.   EXPERIMENTAL MECHANICS

Plastic intermittency during cyclic loading: From dislocation patterning to microcrack initiation

(2019) J. Weiss et al.   PHYSICAL REVIEW MATERIALS

Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy

(2019) J.C. Stinville et al.   ACTA MATERIALIA

In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy

(2019) J.H. Liu et al.   ACTA MATERIALIA

Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm

(2019) Marie-Agathe Charpagne et al.   MATERIALS CHARACTERIZATION

Progress toward autonomous experimental systems for alloy development

(2019) Brad L. Boyce et al.   MRS BULLETIN

New techniques for imaging and identifying defects in electron microscopy

(2019) Daniel S. Gianola et al.   MRS BULLETIN

Completing the picture through correlative characterization

(2019) T. L. Burnett et al.   NATURE MATERIALS

Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy

(2019) X. Xu et al.   ACTA MATERIALIA

Intragranular localization induced by softening crystal plasticity: Analysis of slip and kink bands localization modes from high resolution FFT-simulations results

(2019) Aldo Marano et al.   ACTA MATERIALIA

One-step deposition of nano-to-micron-scalable, high-quality digital image correlation patterns for high-strain in-situ multi-microscopy testing

(2019) J.P.M. Hoefnagels et al.   STRAIN

Avalanche statistics and the intermittent-to-smooth transition in microplasticity

(2019) G. Sparks et al.   Physical Review Materials

Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case

(2019) Zhirong Liao et al.   ACTA MATERIALIA

Experimental and crystal plasticity study on deformation bands in single crystal and multi-crystal pure aluminium

(2019) Qinmeng Luan et al.   ACTA MATERIALIA

Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation

(2019) J.C. Stinville et al.   ACTA MATERIALIA

Investigating active slip planes in tantalum under compressive load: Crystal plasticity and slip trace analyses of single crystals

(2019) Hojun Lim et al.   ACTA MATERIALIA

A 3D analysis of the onset of slip activity in relation to the degree of micro-texture in Ti–6Al–4V

(2019) S. Hémery et al.   ACTA MATERIALIA

Data clustering for the high-resolution alignment of microstructure and strain fields

(2019) Marissa A. Linne et al.   MATERIALS CHARACTERIZATION

Toward an automated tool for dislocation density characterization in a scanning electron microscope

(2019) S. Cazottes et al.   MATERIALS CHARACTERIZATION

Influence of plastic properties on the grain size effect on twinning in Ti and Mg

(2019) M. Arul Kumar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A criterion for slip transfer at grain boundaries in Al

(2019) R. Alizadeh et al.   SCRIPTA MATERIALIA

Shapes and velocity relaxation of dislocation avalanches in Au and Nb microcrystals

(2018) G. Sparks et al.   ACTA MATERIALIA

Measurements of Plastic Localization by Heaviside-Digital Image Correlation

(2018) F. Bourdin et al.   ACTA MATERIALIA

Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method

(2018) N. Grilli et al.   INTERNATIONAL JOURNAL OF PLASTICITY

High-Throughput Nanoindentation for Statistical and Spatial Property Determination

(2018) Eric D. Hintsala et al.   JOM

Fast Slip Velocity in a High-Entropy Alloy

(2018) Q. Rizzardi et al.   JOM

Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy

(2018) Jean-Charles Stinville et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Practical application of direct electron detectors to EBSD mapping in 2D and 3D

(2018) K.P. Mingard et al.   ULTRAMICROSCOPY

Transmission scanning electron microscopy: Defect observations and image simulations

(2018) Patrick G. Callahan et al.   ULTRAMICROSCOPY

High-Resolution Deformation Mapping Across Large Fields of View Using Scanning Electron Microscopy and Digital Image Correlation

(2018) Z. Chen et al.   EXPERIMENTAL MECHANICS

Deformation twin identification in magnesium through clustering and computer vision

(2018) Z. Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Advanced detector signal acquisition and electron beam scanning for high resolution SEM imaging

(2018) William C. Lenthe et al.   ULTRAMICROSCOPY

High resolution low kV EBSD of heavily deformed and nanocrystalline Aluminium by dictionary-based indexing

(2018) Saransh Singh et al.   Scientific Reports

Direct observation of recombination-enhanced dislocation glide in heteroepitaxial GaAs on silicon

(2018) Patrick G. Callahan et al.   PHYSICAL REVIEW MATERIALS

Understanding Detrimental and Beneficial Grain Boundary Effects in Halide Perovskites

(2018) Gede W. P. Adhyaksa et al.   ADVANCED MATERIALS

Incipient Bulk Polycrystal Plasticity Observed by Synchrotron In-Situ Topotomography

(2018) Henry Proudhon et al.   Materials

Nontrivial scaling exponents of dislocation avalanches in microplasticity

(2018) G. Sparks et al.   PHYSICAL REVIEW MATERIALS

Toward Predictive Understanding of Fatigue Crack Nucleation in Ni-Based Superalloys

(2017) Jun Jiang et al.   JOM

Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy

(2017) R. Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cast aluminium single crystals cross the threshold from bulk to size-dependent stochastic plasticity

(2017) J. Krebs et al.   NATURE MATERIALS

Unraveling submicron-scale mechanical heterogeneity by three-dimensional X-ray microdiffraction

(2017) Runguang Li et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Acoustic emission multiplets as early warnings of fatigue failure in metallic materials

(2017) S. Deschanel et al.   Scientific Reports

The plasticity of indium antimonide: Insights from variable temperature, strain rate jump micro-compression testing

(2016) J.M. Wheeler et al.   ACTA MATERIALIA

Incipient slip and long range plastic strain localization in microtextured Ti-6Al-4V titanium

(2016) McLean P. Echlin et al.   ACTA MATERIALIA

A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy

(2016) J.C. Stinville et al.   ACTA MATERIALIA

On the origin of creep dislocations in a Ni-base, single-crystal superalloy: an ECCI, EBSD, and dislocation dynamics-based study

(2016) Farangis Ram et al.   ACTA MATERIALIA

Local heterogeneity in the mechanical properties of bicontinuous composites made by liquid metal dealloying

(2016) Ian McCue et al.   APPLIED PHYSICS LETTERS

Active Slip System Identification in Polycrystalline Metals by Digital Image Correlation (DIC)

(2016) Z. Chen et al.   EXPERIMENTAL MECHANICS

Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations

(2016) Adrien Guery et al.   INTERNATIONAL JOURNAL OF PLASTICITY

The stress statistics of the first pop-in or discrete plastic event in crystal plasticity

(2016) P. M. Derlet et al.   JOURNAL OF APPLIED PHYSICS

In situ measurements of a homogeneous to heterogeneous transition in the plastic response of ion-irradiated 〈1 1 1〉 Ni microspecimens

(2015) Xinyu Zhao et al.   ACTA MATERIALIA

Measurements of stress fields near a grain boundary: Exploring blocked arrays of dislocations in 3D

(2015) Y. Guo et al.   ACTA MATERIALIA

Grain boundary–slip bands interactions: Impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy

(2015) Baptiste Larrouy et al.   ACTA MATERIALIA

High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy

(2015) J.C. Stinville et al.   ACTA MATERIALIA

Rate-dependent shear-band initiation in a metallic glass

(2015) D. Tönnies et al.   APPLIED PHYSICS LETTERS

Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation

(2015) J.C. Stinville et al.   EXPERIMENTAL MECHANICS

Review on slip transmission criteria in experiments and crystal plasticity models

(2015) E. Bayerschen et al.   JOURNAL OF MATERIALS SCIENCE

Dark-field X-ray microscopy for multiscale structural characterization

(2015) H. Simons et al.   Nature Communications

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets

(2015) William C. Lenthe et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Growth Twins and Deformation Twins in Metals

(2014) Irene J. Beyerlein et al.   Annual Review of Materials Research

Impurity precipitation in atomized particles evidenced by nano x-ray diffraction computed tomography

(2014) Anne Bonnin et al.   APPLIED PHYSICS LETTERS

Digital Image Correlation Development for the Study of Materials Including Multiple Crossing Cracks

(2014) V. Valle et al.   EXPERIMENTAL MECHANICS

A method to correct coordinate distortion in EBSD maps

(2014) Y.B. Zhang et al.   MATERIALS CHARACTERIZATION

Effects of Cooling Rate on Transformations in a Fe-9 Pct Ni Steel

(2014) Richard W. Fonda et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Plasticity Initiation and Evolution during Nanoindentation of an Iron–3% Silicon Crystal

(2014) Ling Zhang et al.   PHYSICAL REVIEW LETTERS

Nucleation of shear bands in amorphous alloys

(2014) J. H. Perepezko et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Average yielding and weakest link statistics in micron-scale plasticity

(2013) Péter Dusán Ispánovity et al.   ACTA MATERIALIA

Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope

(2013) Patrick W. Trimby et al.   ACTA MATERIALIA

Self-Assembled Nanoparticle Surface Patterning for Improved Digital Image Correlation in a Scanning Electron Microscope

(2013) A. D. Kammers et al.   EXPERIMENTAL MECHANICS

Nanomechanical properties of Mg–Al intermetallic compounds produced by packed powder diffusion coating (PPDC) on the surface of AZ91E

(2013) H.-W. Chang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Direct Detection of Electron Backscatter Diffraction Patterns

(2013) Angus J. Wilkinson et al.   PHYSICAL REVIEW LETTERS

Multiscale study of acoustic emission during smooth and jerky flow in an AlMg alloy

(2012) I.V. Shashkov et al.   ACTA MATERIALIA

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

(2012) David R. Steinmetz et al.   ACTA MATERIALIA

Three-dimensional imaging of dislocations by X-ray diffraction laminography

(2012) D. Hänschke et al.   APPLIED PHYSICS LETTERS

Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation

(2012) F. Di Gioacchino et al.   EXPERIMENTAL MECHANICS

Phenomenological description and temperature dependence of serrated flow in Ni–10Pd during high temperature instrumented microindentation

(2012) Bin Gan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: Effects of detector binning and step size

(2012) J. Jiang et al.   ULTRAMICROSCOPY

Propagation dynamics of individual shear bands during inhomogeneous flow in a Zr-based bulk metallic glass

(2011) R. Maaß et al.   ACTA MATERIALIA

Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation

(2011) Andrew T. Jennings et al.   ACTA MATERIALIA

Achromatic nested Kirkpatrick–Baez mirror optics for hard X-ray nanofocusing

(2011) Wenjun Liu et al.   JOURNAL OF SYNCHROTRON RADIATION

Size Effects and Stochastic Behavior of Nanoindentation Pop In

(2011) J. R. Morris et al.   PHYSICAL REVIEW LETTERS

Diffraction contrast STEM of dislocations: Imaging and simulations

(2011) P.J. Phillips et al.   ULTRAMICROSCOPY

Measurement of residual elastic strain and lattice rotations with high resolution electron backscatter diffraction

(2011) T.B. Britton et al.   ULTRAMICROSCOPY

The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations

(2010) George M. Pharr et al.   Annual Review of Materials Research

Towards ultrahigh resolution EBSD by low accelerating voltage

(2010) D. R. Steinmetz et al.   MATERIALS SCIENCE AND TECHNOLOGY

Quantitative Atomic Force Microscopy Characterization and Crystal Plasticity Finite Element Modeling of Heterogeneous Deformation in Commercial Purity Titanium

(2010) Y. Yang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Simulation of slip band evolution in duplex Ti–6Al–4V

(2009) M. Zhang et al.   ACTA MATERIALIA

Plasticity of Micrometer-Scale Single Crystals in Compression

(2009) Michael D. Uchic et al.   Annual Review of Materials Research

A Novel “Subset Splitting” Procedure for Digital Image Correlation on Discontinuous Displacement Fields

(2009) J. Poissant et al.   EXPERIMENTAL MECHANICS

At the limit of polychromatic microdiffraction

(2009) Gene E. Ice et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Twin Nucleation by Slip Transfer across Grain Boundaries in Commercial Purity Titanium

(2009) L. Wang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE