Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: A review
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: A review
Authors
Keywords
-
Journal
COMPOSITE STRUCTURES
Volume 315, Issue -, Pages 116994
Publisher
Elsevier BV
Online
2023-04-01
DOI
10.1016/j.compstruct.2023.116994
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- In-situ study on compressive behaviors of different types of 3D SiC/SiC composites using X-ray computed tomography and digital image correlation
- (2023) Duoqi Shi et al. Journal of Materials Research and Technology-JMR&T
- DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses
- (2022) P. L. Reu et al. EXPERIMENTAL MECHANICS
- Comparative experimental study into the explosive blast response of sandwich structures used in naval ships
- (2022) A. Gargano et al. COMPOSITES COMMUNICATIONS
- Strain induced crack initiation and the subsequent crack propagation of fiber-reinforced resin composites
- (2022) Jia Qiu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Microscale deformation mechanisms in paperboard during continuous tensile loading and 4D synchrotron X‐ray tomography
- (2022) Sara Johansson et al. STRAIN
- Fibre angle prediction for post-forming of carbon fibre reinforced composite tubular structures
- (2022) Mengyuan Li et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- SpatioTemporally Adaptive Quadtree Mesh (STAQ) Digital Image Correlation for Resolving Large Deformations Around Complex Geometries and Discontinuities
- (2022) J. Yang et al. EXPERIMENTAL MECHANICS
- StrainNet-3D: Real-time and robust 3-dimensional speckle image correlation using deep learning
- (2022) Guowen Wang et al. OPTICS AND LASERS IN ENGINEERING
- On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures: Mesoscale analysis and in situ experimental investigation
- (2021) Duoqi Shi et al. CERAMICS INTERNATIONAL
- Polymer composite materials : A comprehensive review
- (2021) Rachid Hsissou et al. COMPOSITE STRUCTURES
- Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension
- (2021) Panding Wang et al. COMPOSITE STRUCTURES
- 3D Strain Field Evolution and Failure Mechanisms in Anisotropic Paperboard
- (2021) S. Johansson et al. EXPERIMENTAL MECHANICS
- Optimal Aperture and Digital Speckle Optimization in Digital Image Correlation
- (2021) Y. Wang et al. EXPERIMENTAL MECHANICS
- Investigating the microstructure and mechanical behaviour of simulant “lava-like” fuel containing materials from the Chernobyl reactor unit 4 meltdown
- (2021) C. Paraskevoulakos et al. MATERIALS & DESIGN
- In Situ Investigation of Failure in 3D Braided SiCf/SiC Composites under Flexural Loading
- (2021) Changqi Liu et al. COMPOSITE STRUCTURES
- Composite structures subjected to underwater explosive loadings: A comprehensive review
- (2021) Phuong Tran et al. COMPOSITE STRUCTURES
- Study of hourglass-shaped specimens for the analysis of compression behaviour in fibre direction of FRP composites using compression and four-point bending tests
- (2021) A. Cocchi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Overview of High-temperature Deformation Measurement Using Digital Image Correlation
- (2021) L. Yu et al. EXPERIMENTAL MECHANICS
- Fast Adaptive Mesh Augmented Lagrangian Digital Image Correlation
- (2021) J. Yang et al. EXPERIMENTAL MECHANICS
- Evolutionary trace for ductile fracture performance of rubber−cement composites
- (2021) Jianchao Zhang et al. CEMENT & CONCRETE COMPOSITES
- Review of digital image correlation application to large-scale composite structure testing
- (2021) Rims Janeliukstis et al. COMPOSITE STRUCTURES
- Experimental evaluation of carbon fibre, fibreglass and aramid tubular braided composites under combined tension–torsion loading
- (2021) Abbas Armanfard et al. COMPOSITE STRUCTURES
- Failure behaviour in woven thermoplastic composites subjected to various deformation modes
- (2021) John Holmes et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- In situ X-ray tomography characterisation of 3D deformation of C/C-SiC composites loaded under tension
- (2021) Yang Chen et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Artificial seeding for micro-computed tomography image contrast enhancement for digital volume correlation
- (2021) Cristofaro S. Timpano et al. COMPOSITES PART B-ENGINEERING
- Digital volume correlation for meso/micro in-situ damage analysis in carbon fiber reinforced composites
- (2021) Mahoor Mehdikhani et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Digital volume correlation analysis of polylactic acid based fused filament fabrication printed composites
- (2021) Cristofaro S Timpano et al. JOURNAL OF COMPOSITE MATERIALS
- Generating 3D digital material twins for woven ceramic‐matrix composites from μCT images
- (2021) Yihui Chen et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of Microcracks on the Tensile Properties of 3D Woven Composites
- (2021) Jian Huang et al. Coatings
- An innovative digital image correlation technique for in-situ process monitoring of composite structures in large scale additive manufacturing
- (2021) Ryan Spencer et al. COMPOSITE STRUCTURES
- Structural optimisation of cross-chiral metamaterial structures via genetic algorithm
- (2021) Jiaqi Dong et al. COMPOSITE STRUCTURES
- Digital image and volume correlation with X-ray micro-computed tomography for deformation and damage characterisation of woven fibre-reinforced composites
- (2021) John Holmes et al. COMPOSITE STRUCTURES
- Geometrical and deep learning approaches for instance segmentation of CFRP fiber bundles in textile composites
- (2021) Yuriy Sinchuk et al. COMPOSITE STRUCTURES
- Flexural progressive failure mechanism of hybrid 3D woven composites: Combination of X-ray tomography, acoustic emission and digital image correlation
- (2021) Qi Liang et al. COMPOSITE STRUCTURES
- Characterisation of void and fiber distribution in 3D printed carbon-fiber/PEEK using X-ray computed tomography
- (2021) S. Sommacal et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Application of different imaging techniques for the characterization of damage in fiber reinforced polymer
- (2021) Ana Vrgoč et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Advancements in fiber-reinforced polymer composite materials damage detection methods: Towards achieving energy-efficient SHM systems
- (2021) Osama Ahmed et al. COMPOSITES PART B-ENGINEERING
- Characterisation of off-axis tensile behaviour and mesoscale deformation of woven carbon-fibre/PEEK using digital image correlation and X-ray computed tomography
- (2021) John Holmes et al. COMPOSITES PART B-ENGINEERING
- Design, modeling, optimization, manufacturing and testing of variable-angle filament-wound cylinders
- (2021) José Humberto S. Almeida et al. COMPOSITES PART B-ENGINEERING
- Efficient processing of μCT images using deep learning tools for generating digital material twins of woven fabrics
- (2021) Muhammad A. Ali et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Review of high-speed imaging with lab-based x-ray computed tomography
- (2021) E A Zwanenburg et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Mirror-assisted multi-view digital image correlation: Principles, applications and implementations
- (2021) Bin Chen et al. OPTICS AND LASERS IN ENGINEERING
- Full-field characterisation of oxide-oxide ceramic-matrix composites using X-ray computed micro-tomography and digital volume correlation under load at high temperatures
- (2021) J. Paul Forna-Kreutzer et al. MATERIALS & DESIGN
- Flexural failure mechanism of 2.5D woven SiCf/SiC composites: Combination of acoustic emission, digital image correlation and X-ray tomography
- (2021) Yadi Duan et al. COMPOSITES COMMUNICATIONS
- 3D topographical analysis for defect detection during loading of woven thermoplastic composites
- (2021) John Holmes et al. COMPOSITES COMMUNICATIONS
- Numerical modeling of 3D woven composite reinforcements: A review
- (2021) Yanneck Wielhorski et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- PLY thickness and fibre orientation effects in multidirectional composite laminates subjected to combined tension/compression and shear
- (2020) Tobias Laux et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
- (2020) K. Naresh et al. MATERIALS & DESIGN
- Residual Deformation Analysis in Composite Shell Structures Manufactured using Automated Fiber Placement
- (2020) V.C. Jamora et al. COMPOSITE STRUCTURES
- Damage assessment of NCF, 2D and 3D woven composites under compression after multiple-impact using acoustic emission
- (2020) Milad Saeedifar et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography
- (2020) E. Schöberl et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids
- (2020) V. Zinnecker et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Micro-computed tomography analysis of damage in notched composite laminates under multi-axial fatigue
- (2020) Yao Qiao et al. COMPOSITES PART B-ENGINEERING
- Surface topography evolution of woven thermoplastic composites under deformation
- (2020) John Holmes et al. COMPOSITES PART B-ENGINEERING
- Detailed stress analysis of a twill orthogonally woven textile composite
- (2020) M Keith Ballard et al. JOURNAL OF COMPOSITE MATERIALS
- Calibrating stereo-digital image correlation system using synthetic speckle-pattern calibration target
- (2020) Bin Chen et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review
- (2020) Bing Wang et al. Advances in Mechanical Engineering
- Refine reconstruction and verification of meso-scale modeling of three-dimensional five-directional braided composites from X-ray computed tomography data
- (2020) Xiaodong Liu et al. COMPOSITE STRUCTURES
- Post-buckling failure studies on quasi-isotropic CFRP panels under positive and negative in-plane shear loading
- (2020) Naresh Reddy Kolanu et al. COMPOSITE STRUCTURES
- Experimental and numerical analysis of progressive damage and failure behavior of carbon Woven-PPS
- (2020) Leila Jebri et al. COMPOSITE STRUCTURES
- Experimental characterisation of the in-plane shear behaviour of UD thermoset prepregs under processing conditions
- (2020) Yi Wang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Digital volume correlation technique for characterizing subsurface deformation behavior of a laminated composite
- (2020) Sooyoung Lee et al. COMPOSITES PART B-ENGINEERING
- 3D/4D characterization of strain distribution evolving within the microstructure during plastic deformation
- (2020) Masakazu Kobayashi et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Some recent advances in digital volume correlation
- (2020) Bing Pan et al. OPTICS AND LASERS IN ENGINEERING
- There’s plenty of room at the Top: What will drive computer performance after Moore’s law?
- (2020) Charles E. Leiserson et al. SCIENCE
- Measurement and prediction of residual strains and stresses during the cooling of a glass fibre reinforced PA66 matrix composite
- (2020) Mael Péron et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- 10° off-axis testing of CFRP using DIC: A study on strength, strain and modulus
- (2020) Matthias Merzkirch et al. COMPOSITES PART B-ENGINEERING
- Interlaboratory Study of Digital Volume Correlation Error Due to X-Ray Computed Tomography Equipment and Scan Parameters: an Update from the DVC Challenge
- (2020) B.P. Croom et al. EXPERIMENTAL MECHANICS
- Augmented Lagrangian Digital Volume Correlation (ALDVC)
- (2020) J. Yang et al. EXPERIMENTAL MECHANICS
- Implementation of the Modified V-Notched Rail Shear Method for Characterizing Glass Fibre Thermoplastic Composites at Sub-Zero and Elevated Temperatures
- (2020) Antoniomaria Di Ilio et al. POLYMER TESTING
- Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states
- (2020) Guowei Zhou et al. POLYMER TESTING
- Digital volume correlation using a spherical shell template and cubic element for large rotation measurement
- (2020) Xiaochuan Zhang et al. APPLIED OPTICS
- Torsion damage mechanisms analysis of two-dimensional braided composite tubes with digital image correction and X-ray micro-computed tomography
- (2020) Yuanhui Gu et al. COMPOSITE STRUCTURES
- Non-linear FE2 multiscale simulation of damage, micro and macroscopic strains in polyamide 66-woven composite structures: Analysis and experimental validation
- (2020) E. Tikarrouchine et al. COMPOSITE STRUCTURES
- Data-driven multiscale simulation of FRP based on material twins
- (2020) Wei Huang et al. COMPOSITE STRUCTURES
- A comparative study of a quasi 3D woven composite with UD and 2D woven laminates
- (2020) Wu Zhou et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A novel failure criterion based upon forming limit curve for thermoplastic composites
- (2020) Zhen Wang et al. COMPOSITES PART B-ENGINEERING
- Development of an S-specimen geometry for shear testing of woven thermoplastic composites
- (2020) John Holmes et al. COMPOSITES PART B-ENGINEERING
- High velocity impact response of hybridized pseudo-woven carbon fiber composite architectures
- (2020) Cyrus Vakili Rad et al. COMPOSITES PART B-ENGINEERING
- Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings
- (2020) Guowei Zhou et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography
- (2020) E Schöberl et al. JOURNAL OF COMPOSITE MATERIALS
- Dynamic three-dimensional imaging and digital volume correlation analysis to quantify shear bands in grus
- (2020) Chengsheng Li et al. MECHANICS OF MATERIALS
- 3D SIFT aided path independent digital volume correlation and its GPU acceleration
- (2020) Junrong Yang et al. OPTICS AND LASERS IN ENGINEERING
- Detecting damage initiation in short fiber composites via in-situ X-ray tomography and digital volume correlation
- (2020) Ronald F. Agyei et al. COMPOSITES COMMUNICATIONS
- Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites
- (2020) Guowei Zhou et al. COMPOSITE STRUCTURES
- Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming
- (2020) J.V. Viisainen et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Deformation measurement in the presence of discontinuities with digital image correlation: A review
- (2020) Ghulam Mubashar Hassan OPTICS AND LASERS IN ENGINEERING
- Digital image correlation (DIC) for measurement of strains and displacements in coarse, low volume-fraction FRP composites used in civil infrastructure
- (2019) Enrique del Rey Castillo et al. COMPOSITE STRUCTURES
- Multiscale surrogate-based framework for reliability analysis of unidirectional FRP composites
- (2019) Sadik L. Omairey et al. COMPOSITES PART B-ENGINEERING
- 3D Strain Mapping of Opaque Materials Using an Improved Digital Volumetric Speckle Photography Technique with X-Ray Microtomography
- (2019) Lingtao Mao et al. Applied Sciences-Basel
- Anisotropic self-adaptive digital volume correlation with optimal cuboid subvolumes
- (2019) Bo Wang et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Progression of X-ray computed tomography from medical imaging to current status in dimensional metrology
- (2019) Herminso Villarraga-Gómez et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Digital Image Correlation Applications in Composite Automated Manufacturing, Inspection, and Testing
- (2019) Farjad Shadmehri et al. Applied Sciences-Basel
- Design of an uncontaminated textile CFRP specimen optimised for both mechanical testing and X-ray microtomography
- (2019) N.T. Chowdhury et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Influence of tab debonding on measured stiffness evolution in Compression-Compression and Tension-Compression fatigue testing of short gauge length coupons
- (2019) R.D.B. Sevenois et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Polymerization shrinkage of resin-based composites for dental restorations: A digital volume correlation study
- (2019) Marta Gallo et al. DENTAL MATERIALS
- Successes and challenges in non-destructive testing of aircraft composite structures
- (2019) Hossein TOWSYFYAN et al. Chinese Journal of Aeronautics
- Effect of fiber architecture on tensile fracture of 3D woven textile composites
- (2019) M. Pankow et al. COMPOSITE STRUCTURES
- Effect of automated fiber placement (AFP) manufacturing signature on mechanical performance of composite structures
- (2019) Minh Hoang Nguyen et al. COMPOSITE STRUCTURES
- Multiaxial loading on a 3D woven carbon fiber reinforced plastic composite using tensile-torsion tests : Identification of the first damage envelope and associated damage mechanisms
- (2019) Nicolas Tableau et al. COMPOSITE STRUCTURES
- Compression after multiple low velocity impacts of NCF, 2D and 3D woven composites
- (2019) Mohamed Nasr Saleh et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Unveiling hermetic failure of ceramic tubes by digital image correlation and acoustic emission
- (2019) Clifton H. Bumgardner et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Fully experiment-based evaluation of few digital volume correlation techniques
- (2019) Bartosz Powierza et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- The correlation framework: Bridging the gap between modeling and analysis for 3D woven composites
- (2019) Arturo Mendoza et al. COMPOSITE STRUCTURES
- Variational segmentation of textile composite preforms from X-ray computed tomography
- (2019) Jean Bénézech et al. COMPOSITE STRUCTURES
- Development of Modified Arcan Fixture for biaxial loading response of fiber-reinforced composites
- (2019) P. Hao et al. POLYMER TESTING
- Measurements of Plastic Localization by Heaviside-Digital Image Correlation
- (2018) F. Bourdin et al. ACTA MATERIALIA
- A novel fixture for determining the tension/compression-shear failure envelope of multidirectional composite laminates
- (2018) Khong Wui Gan et al. COMPOSITE STRUCTURES
- Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO 2f /SiO 2 composites using single-camera stereo-digital image correlation
- (2018) Liping Yu et al. COMPOSITE STRUCTURES
- A multiscale experimental approach for correlating global and local deformation response in woven composites
- (2018) Behrad Koohbor et al. COMPOSITE STRUCTURES
- Effect of manufacturing defect on mechanical performance of plain weave carbon/epoxy composite based on 3D geometrical reconstruction
- (2018) Panding Wang et al. COMPOSITE STRUCTURES
- Discontinuities as a way to influence the failure mechanisms and tensile performance of hybrid carbon fiber/self-reinforced polypropylene composites
- (2018) Jun Tang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Passive control of wrinkles in woven fabric preforms using a geometrical modification of blank holders
- (2018) A. Rashidi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Quasi-static and fatigue performance of carbon fibre reinforced highly polymerized thermoplastic epoxy
- (2018) Hironori Nishida et al. COMPOSITES PART B-ENGINEERING
- Influence of matrix ductility and toughness on strain energy release rate and failure behavior of woven-ply reinforced thermoplastic structures at high temperature
- (2018) B. Vieille et al. COMPOSITES PART B-ENGINEERING
- X-ray computed tomography of polymer composites
- (2018) S.C. Garcea et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Crossed investigation of damage in composites with embedded quantum resistive strain sensors (sQRS), acoustic emission (AE) and digital image correlation (DIC)
- (2018) S. Nag-Chowdhury et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Influence of Camera Rotation on Stereo-DIC and Compensation Methods
- (2018) R. Balcaen et al. EXPERIMENTAL MECHANICS
- Digital Volume Correlation: Review of Progress and Challenges
- (2018) A. Buljac et al. EXPERIMENTAL MECHANICS
- Scalable measurements of tow architecture variability in braided ceramic composite tubes
- (2018) Frederick M. Heim et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals
- (2018) Bing Pan MEASUREMENT SCIENCE and TECHNOLOGY
- Morphological evolution and internal strain mapping of pomelo peel using X-ray computed tomography and digital volume correlation
- (2018) B. Wang et al. MATERIALS & DESIGN
- An experimental study on the manufacture and characterization of in-plane fibre-waviness defects in composites
- (2018) W. J. R. Christian et al. Royal Society Open Science
- The effect of off-axis angles on the mesoscale deformation response and failure behavior of an orthotropic textile carbon-epoxy composite
- (2018) Jishen Yang et al. COMPOSITE STRUCTURES
- Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle
- (2018) Mahoor Mehdikhani et al. COMPOSITES PART B-ENGINEERING
- Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation
- (2018) Fan Wan et al. CERAMICS INTERNATIONAL
- Differentiating 3D textile composites: A novel field of application for Digital Volume Correlation
- (2018) Arturo Mendoza et al. COMPOSITE STRUCTURES
- Self-Adaptive Digital Volume Correlation for Unknown Deformation Fields
- (2018) B. Wang et al. EXPERIMENTAL MECHANICS
- FRP-to-FRP bond characterization and force-based bond length model
- (2018) Alaukik Singh et al. COMPOSITE STRUCTURES
- Modelling the in-plane strain rate dependent behaviour of woven composites with special emphasis on the non-linear shear response
- (2018) F. Martínez-Hergueta et al. COMPOSITE STRUCTURES
- Progressive failure of inter-woven carbon-Dyneema fabric reinforced hybrid composites
- (2018) M. Cao et al. COMPOSITE STRUCTURES
- Shear response of 3D non-woven carbon fibre reinforced composites
- (2018) Lucas R. Meza et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- In-Situ Systematic Error Correction for Digital Volume Correlation Using a Reference Sample
- (2017) B. Wang et al. EXPERIMENTAL MECHANICS
- A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation
- (2017) Y.L. Dong et al. EXPERIMENTAL MECHANICS
- DIC Challenge: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses
- (2017) P. L. Reu et al. EXPERIMENTAL MECHANICS
- On the choice of boundary conditions for micromechanical simulations based on 3D imaging
- (2017) Modesar Shakoor et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- High-speed 3D digital image correlation vibration measurement: Recent advancements and noted limitations
- (2017) Timothy J. Beberniss et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Whole-field thickness strain measurement using multiple camera digital image correlation system
- (2017) Junrui Li et al. OPTICS AND LASERS IN ENGINEERING
- Full-frame, high-speed 3D shape and deformation measurements using stereo-digital image correlation and a single color high-speed camera
- (2017) Liping Yu et al. OPTICS AND LASERS IN ENGINEERING
- Experimental Investigation of Delamination Growth in Composite Laminates under a Compressive Load
- (2017) A. Riccio et al. Advances in Materials Science and Engineering
- Precision of Digital Volume Correlation Approaches for Strain Analysis in Bone Imaged with Micro-Computed Tomography at Different Dimensional Levels
- (2017) Enrico Dall’Ara et al. Frontiers in Materials
- A comparative study of twill weave reinforced composites under tension–tension fatigue loading: Experiments and meso-modelling
- (2016) J. Xu et al. COMPOSITE STRUCTURES
- On the influence of fabric layer shifts on the strain distributions in a multi-layer woven composite
- (2016) Aurélien Doitrand et al. COMPOSITE STRUCTURES
- Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation
- (2016) Mahoor Mehdikhani et al. COMPOSITE STRUCTURES
- Characterising the loading direction sensitivity of 3D woven composites: Effect of z-binder architecture
- (2016) Mohamed Nasr Saleh et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental and numerical investigations of strain rate effects on mechanical properties of LGFRP composite
- (2016) Shuyong Duan et al. COMPOSITES PART B-ENGINEERING
- Viscoelastic viscoplastic model for aeronautical thermoplastic laminates at high temperature: Validation on high stress gradient structures
- (2016) B. Vieille et al. COMPOSITES PART B-ENGINEERING
- Strain mapping at the micro-scale in hierarchical polymer composites with aligned carbon nanotube grafted fibers
- (2016) Mahoor Mehdikhani et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A new method for limit point determination in composite materials containing defects using image correlation
- (2016) Rani F. Elhajjar et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effects of layer shift and yarn path variability on mechanical properties of a twill weave composite
- (2016) MY Matveev et al. JOURNAL OF COMPOSITE MATERIALS
- In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
- (2016) L. Saucedo-Mora et al. JOURNAL OF NUCLEAR MATERIALS
- Effects of Preform Shear on Tensile Properties of a Woven C/SiC Composite
- (2016) John H. Shaw et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Multi-scale damage modelling in a ceramic matrix composite using a finite-element microstructure meshfree methodology
- (2016) L. Saucedo-Mora et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Recent advances in modeling and experiments of Kevlar ballistic fibrils, fibers, yarns and flexible woven textile fabrics – a review
- (2016) Subramani Sockalingam et al. TEXTILE RESEARCH JOURNAL
- Interior strain analysis of a woven composite beam using X-ray computed tomography and digital volumetric speckle photography
- (2015) Lingtao Mao et al. COMPOSITE STRUCTURES
- Full-field strain measurements and meso-FE modelling of hybrid carbon/self-reinforced polypropylene
- (2015) Seyed Ahmad Tabatabaei et al. COMPOSITE STRUCTURES
- Comparing experimental results to a numerical meso-scale approach for woven fiber reinforced plastics
- (2015) B. Stier et al. COMPOSITE STRUCTURES
- Open hole quasi-static and fatigue characterisation of 3D woven composites
- (2015) S. Dai et al. COMPOSITE STRUCTURES
- Experimental investigation of three-dimensional woven composites
- (2015) Kyle C. Warren et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effects of weave architecture on mechanical response of 2D ceramic composites
- (2015) Michael N. Rossol et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Heterogeneity of discontinuous carbon fibre composites: Damage initiation captured by Digital Image Correlation
- (2015) K. Johanson et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Nesting effect on the mode II fracture toughness of woven laminates
- (2015) Mireia Olave et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Estimating mechanical properties of 2D triaxially braided textile composites based on microstructure properties
- (2015) Zachary T. Kier et al. COMPOSITES PART B-ENGINEERING
- Experimental characterization and numerical modeling of damage at the mesoscopic scale of woven polymer matrix composites under quasi-static tensile loading
- (2015) A. Doitrand et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A Technique for Coupled Thermomechanical Response Measurement Using Infrared Thermography and Digital Image Correlation (TDIC)
- (2015) N. Cholewa et al. EXPERIMENTAL MECHANICS
- Recent Advances and Perspectives in Digital Image Correlation
- (2015) M. A. Sutton et al. EXPERIMENTAL MECHANICS
- Comparison of Subset-Based Local and Finite Element-Based Global Digital Image Correlation
- (2015) B. Pan et al. EXPERIMENTAL MECHANICS
- Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
- (2015) J. Blaber et al. EXPERIMENTAL MECHANICS
- High strain rate behaviour of 5-harness-satin weave fabric carbon–epoxy composite under compression and combined compression–shear loading
- (2015) H. Koerber et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Three-Dimensional Local Measurements of Bone Strain and Displacement: Comparison of Three Digital Volume Correlation Approaches
- (2015) Marco Palanca et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
- (2015) R Muñoz et al. JOURNAL OF COMPOSITE MATERIALS
- Fibre–matrix interfaces in carbon fibre reinforced PPS composites: damage initiation and propagation in tensile tests
- (2014) Paola Carnevale et al. COMPOSITE INTERFACES
- Mechanical modelling of 3D woven composites considering realistic unit cell geometry
- (2014) S.D. Green et al. COMPOSITE STRUCTURES
- Fracture Behavior of Prestressed Composites Subjected to Shock Loading: A DIC-Based Study
- (2014) S. Mallon et al. EXPERIMENTAL MECHANICS
- Three-Dimensional Investigation of Free-Edge Effects in Laminate Composites Using X-ray Tomography and Digital Volume Correlation
- (2014) P. Lecomte-Grosbras et al. EXPERIMENTAL MECHANICS
- Projection Savings in CT-based Digital Volume Correlation
- (2014) H. Leclerc et al. EXPERIMENTAL MECHANICS
- A Fast Iterative Digital Volume Correlation Algorithm for Large Deformations
- (2014) E. Bar-Kochba et al. EXPERIMENTAL MECHANICS
- Measurement of In Situ-Full-Field Strain Maps on Ceramic Matrix Composites at Elevated Temperature Using Digital Image Correlation
- (2014) P. Meyer et al. EXPERIMENTAL MECHANICS
- Glass fiber-reinforced polymer composites – a review
- (2014) TP Sathishkumar et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Characterizing In-Plane Geometrical Variability in Textile Ceramic Composites
- (2014) Michael N. Rossol et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effects of Tow-Scale Holes on the Mechanical Performance of a 3D Woven C/SiC Composite
- (2014) John H. Shaw et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Techniques in helical scanning, dynamic imaging and image segmentation for improved quantitative analysis with X-ray micro-CT
- (2014) Adrian Sheppard et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Quantitative X-ray tomography
- (2013) E. Maire et al. INTERNATIONAL MATERIALS REVIEWS
- High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation
- (2013) F. Mortazavi et al. OPTICS AND LASERS IN ENGINEERING
- Forming studies of carbon fibre composite sheets in dome forming processes
- (2012) S. Davey et al. COMPOSITE STRUCTURES
- Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite
- (2012) R. Gras et al. EXPERIMENTAL MECHANICS
- Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites
- (2012) V. P. Rajan et al. EXPERIMENTAL MECHANICS
- Comparison of Local and Global Approaches to Digital Image Correlation
- (2012) F. Hild et al. EXPERIMENTAL MECHANICS
- Interlaminar/interfiber failure of unidirectional glass fiber reinforced composites used for wind turbine blades
- (2012) Martin Leong et al. JOURNAL OF COMPOSITE MATERIALS
- Local strain in a 5-harness satin weave composite under static tension: Part II – Meso-FE analysis
- (2011) S. Daggumati et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Local strain in a 5-harness satin weave composite under static tension: Part I – Experimental analysis
- (2011) S. Daggumati et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Comparative study on the behavior of woven-ply reinforced thermoplastic or thermosetting laminates under severe environmental conditions
- (2011) B. Vieille et al. MATERIALS & DESIGN
- Development of self-reinforced polymer composites
- (2011) Chengcheng Gao et al. PROGRESS IN POLYMER SCIENCE
- Notched behaviour of discontinuous carbon fibre composites: Comparison with quasi-isotropic non-crimp fabric
- (2010) C. Qian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements
- (2009) Bing Pan et al. OPTICS AND LASERS IN ENGINEERING
- The effect of out-of-plane motion on 2D and 3D digital image correlation measurements
- (2008) M.A. Sutton et al. OPTICS AND LASERS IN ENGINEERING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now