Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: A review
出版年份 2023 全文链接
标题
Digital image and volume correlation for deformation and damage characterisation of fibre-reinforced composites: A review
作者
关键词
-
出版物
COMPOSITE STRUCTURES
Volume 315, Issue -, Pages 116994
出版商
Elsevier BV
发表日期
2023-04-01
DOI
10.1016/j.compstruct.2023.116994
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- In-situ study on compressive behaviors of different types of 3D SiC/SiC composites using X-ray computed tomography and digital image correlation
- (2023) Duoqi Shi et al. Journal of Materials Research and Technology-JMR&T
- DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses
- (2022) P. L. Reu et al. EXPERIMENTAL MECHANICS
- Comparative experimental study into the explosive blast response of sandwich structures used in naval ships
- (2022) A. Gargano et al. COMPOSITES COMMUNICATIONS
- Strain induced crack initiation and the subsequent crack propagation of fiber-reinforced resin composites
- (2022) Jia Qiu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Microscale deformation mechanisms in paperboard during continuous tensile loading and 4D synchrotron X‐ray tomography
- (2022) Sara Johansson et al. STRAIN
- Fibre angle prediction for post-forming of carbon fibre reinforced composite tubular structures
- (2022) Mengyuan Li et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- SpatioTemporally Adaptive Quadtree Mesh (STAQ) Digital Image Correlation for Resolving Large Deformations Around Complex Geometries and Discontinuities
- (2022) J. Yang et al. EXPERIMENTAL MECHANICS
- StrainNet-3D: Real-time and robust 3-dimensional speckle image correlation using deep learning
- (2022) Guowen Wang et al. OPTICS AND LASERS IN ENGINEERING
- On the tensile behaviors of 2D twill woven SiO2f/SiO2 composites at ambient and elevated temperatures: Mesoscale analysis and in situ experimental investigation
- (2021) Duoqi Shi et al. CERAMICS INTERNATIONAL
- Polymer composite materials : A comprehensive review
- (2021) Rachid Hsissou et al. COMPOSITE STRUCTURES
- Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension
- (2021) Panding Wang et al. COMPOSITE STRUCTURES
- 3D Strain Field Evolution and Failure Mechanisms in Anisotropic Paperboard
- (2021) S. Johansson et al. EXPERIMENTAL MECHANICS
- Optimal Aperture and Digital Speckle Optimization in Digital Image Correlation
- (2021) Y. Wang et al. EXPERIMENTAL MECHANICS
- Investigating the microstructure and mechanical behaviour of simulant “lava-like” fuel containing materials from the Chernobyl reactor unit 4 meltdown
- (2021) C. Paraskevoulakos et al. MATERIALS & DESIGN
- In Situ Investigation of Failure in 3D Braided SiCf/SiC Composites under Flexural Loading
- (2021) Changqi Liu et al. COMPOSITE STRUCTURES
- Composite structures subjected to underwater explosive loadings: A comprehensive review
- (2021) Phuong Tran et al. COMPOSITE STRUCTURES
- Study of hourglass-shaped specimens for the analysis of compression behaviour in fibre direction of FRP composites using compression and four-point bending tests
- (2021) A. Cocchi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Overview of High-temperature Deformation Measurement Using Digital Image Correlation
- (2021) L. Yu et al. EXPERIMENTAL MECHANICS
- Fast Adaptive Mesh Augmented Lagrangian Digital Image Correlation
- (2021) J. Yang et al. EXPERIMENTAL MECHANICS
- Evolutionary trace for ductile fracture performance of rubber−cement composites
- (2021) Jianchao Zhang et al. CEMENT & CONCRETE COMPOSITES
- Review of digital image correlation application to large-scale composite structure testing
- (2021) Rims Janeliukstis et al. COMPOSITE STRUCTURES
- Experimental evaluation of carbon fibre, fibreglass and aramid tubular braided composites under combined tension–torsion loading
- (2021) Abbas Armanfard et al. COMPOSITE STRUCTURES
- Failure behaviour in woven thermoplastic composites subjected to various deformation modes
- (2021) John Holmes et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- In situ X-ray tomography characterisation of 3D deformation of C/C-SiC composites loaded under tension
- (2021) Yang Chen et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Artificial seeding for micro-computed tomography image contrast enhancement for digital volume correlation
- (2021) Cristofaro S. Timpano et al. COMPOSITES PART B-ENGINEERING
- Digital volume correlation for meso/micro in-situ damage analysis in carbon fiber reinforced composites
- (2021) Mahoor Mehdikhani et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Digital volume correlation analysis of polylactic acid based fused filament fabrication printed composites
- (2021) Cristofaro S Timpano et al. JOURNAL OF COMPOSITE MATERIALS
- Generating 3D digital material twins for woven ceramic‐matrix composites from μCT images
- (2021) Yihui Chen et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effect of Microcracks on the Tensile Properties of 3D Woven Composites
- (2021) Jian Huang et al. Coatings
- An innovative digital image correlation technique for in-situ process monitoring of composite structures in large scale additive manufacturing
- (2021) Ryan Spencer et al. COMPOSITE STRUCTURES
- Structural optimisation of cross-chiral metamaterial structures via genetic algorithm
- (2021) Jiaqi Dong et al. COMPOSITE STRUCTURES
- Digital image and volume correlation with X-ray micro-computed tomography for deformation and damage characterisation of woven fibre-reinforced composites
- (2021) John Holmes et al. COMPOSITE STRUCTURES
- Geometrical and deep learning approaches for instance segmentation of CFRP fiber bundles in textile composites
- (2021) Yuriy Sinchuk et al. COMPOSITE STRUCTURES
- Flexural progressive failure mechanism of hybrid 3D woven composites: Combination of X-ray tomography, acoustic emission and digital image correlation
- (2021) Qi Liang et al. COMPOSITE STRUCTURES
- Characterisation of void and fiber distribution in 3D printed carbon-fiber/PEEK using X-ray computed tomography
- (2021) S. Sommacal et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Application of different imaging techniques for the characterization of damage in fiber reinforced polymer
- (2021) Ana Vrgoč et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Advancements in fiber-reinforced polymer composite materials damage detection methods: Towards achieving energy-efficient SHM systems
- (2021) Osama Ahmed et al. COMPOSITES PART B-ENGINEERING
- Characterisation of off-axis tensile behaviour and mesoscale deformation of woven carbon-fibre/PEEK using digital image correlation and X-ray computed tomography
- (2021) John Holmes et al. COMPOSITES PART B-ENGINEERING
- Design, modeling, optimization, manufacturing and testing of variable-angle filament-wound cylinders
- (2021) José Humberto S. Almeida et al. COMPOSITES PART B-ENGINEERING
- Efficient processing of μCT images using deep learning tools for generating digital material twins of woven fabrics
- (2021) Muhammad A. Ali et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Review of high-speed imaging with lab-based x-ray computed tomography
- (2021) E A Zwanenburg et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Mirror-assisted multi-view digital image correlation: Principles, applications and implementations
- (2021) Bin Chen et al. OPTICS AND LASERS IN ENGINEERING
- Full-field characterisation of oxide-oxide ceramic-matrix composites using X-ray computed micro-tomography and digital volume correlation under load at high temperatures
- (2021) J. Paul Forna-Kreutzer et al. MATERIALS & DESIGN
- Flexural failure mechanism of 2.5D woven SiCf/SiC composites: Combination of acoustic emission, digital image correlation and X-ray tomography
- (2021) Yadi Duan et al. COMPOSITES COMMUNICATIONS
- 3D topographical analysis for defect detection during loading of woven thermoplastic composites
- (2021) John Holmes et al. COMPOSITES COMMUNICATIONS
- Numerical modeling of 3D woven composite reinforcements: A review
- (2021) Yanneck Wielhorski et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- PLY thickness and fibre orientation effects in multidirectional composite laminates subjected to combined tension/compression and shear
- (2020) Tobias Laux et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
- (2020) K. Naresh et al. MATERIALS & DESIGN
- Residual Deformation Analysis in Composite Shell Structures Manufactured using Automated Fiber Placement
- (2020) V.C. Jamora et al. COMPOSITE STRUCTURES
- Damage assessment of NCF, 2D and 3D woven composites under compression after multiple-impact using acoustic emission
- (2020) Milad Saeedifar et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography
- (2020) E. Schöberl et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids
- (2020) V. Zinnecker et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Micro-computed tomography analysis of damage in notched composite laminates under multi-axial fatigue
- (2020) Yao Qiao et al. COMPOSITES PART B-ENGINEERING
- Surface topography evolution of woven thermoplastic composites under deformation
- (2020) John Holmes et al. COMPOSITES PART B-ENGINEERING
- Detailed stress analysis of a twill orthogonally woven textile composite
- (2020) M Keith Ballard et al. JOURNAL OF COMPOSITE MATERIALS
- Calibrating stereo-digital image correlation system using synthetic speckle-pattern calibration target
- (2020) Bin Chen et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review
- (2020) Bing Wang et al. Advances in Mechanical Engineering
- Refine reconstruction and verification of meso-scale modeling of three-dimensional five-directional braided composites from X-ray computed tomography data
- (2020) Xiaodong Liu et al. COMPOSITE STRUCTURES
- Post-buckling failure studies on quasi-isotropic CFRP panels under positive and negative in-plane shear loading
- (2020) Naresh Reddy Kolanu et al. COMPOSITE STRUCTURES
- Experimental and numerical analysis of progressive damage and failure behavior of carbon Woven-PPS
- (2020) Leila Jebri et al. COMPOSITE STRUCTURES
- Experimental characterisation of the in-plane shear behaviour of UD thermoset prepregs under processing conditions
- (2020) Yi Wang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Digital volume correlation technique for characterizing subsurface deformation behavior of a laminated composite
- (2020) Sooyoung Lee et al. COMPOSITES PART B-ENGINEERING
- 3D/4D characterization of strain distribution evolving within the microstructure during plastic deformation
- (2020) Masakazu Kobayashi et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Some recent advances in digital volume correlation
- (2020) Bing Pan et al. OPTICS AND LASERS IN ENGINEERING
- There’s plenty of room at the Top: What will drive computer performance after Moore’s law?
- (2020) Charles E. Leiserson et al. SCIENCE
- Measurement and prediction of residual strains and stresses during the cooling of a glass fibre reinforced PA66 matrix composite
- (2020) Mael Péron et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- 10° off-axis testing of CFRP using DIC: A study on strength, strain and modulus
- (2020) Matthias Merzkirch et al. COMPOSITES PART B-ENGINEERING
- Interlaboratory Study of Digital Volume Correlation Error Due to X-Ray Computed Tomography Equipment and Scan Parameters: an Update from the DVC Challenge
- (2020) B.P. Croom et al. EXPERIMENTAL MECHANICS
- Augmented Lagrangian Digital Volume Correlation (ALDVC)
- (2020) J. Yang et al. EXPERIMENTAL MECHANICS
- Implementation of the Modified V-Notched Rail Shear Method for Characterizing Glass Fibre Thermoplastic Composites at Sub-Zero and Elevated Temperatures
- (2020) Antoniomaria Di Ilio et al. POLYMER TESTING
- Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states
- (2020) Guowei Zhou et al. POLYMER TESTING
- Digital volume correlation using a spherical shell template and cubic element for large rotation measurement
- (2020) Xiaochuan Zhang et al. APPLIED OPTICS
- Torsion damage mechanisms analysis of two-dimensional braided composite tubes with digital image correction and X-ray micro-computed tomography
- (2020) Yuanhui Gu et al. COMPOSITE STRUCTURES
- Non-linear FE2 multiscale simulation of damage, micro and macroscopic strains in polyamide 66-woven composite structures: Analysis and experimental validation
- (2020) E. Tikarrouchine et al. COMPOSITE STRUCTURES
- Data-driven multiscale simulation of FRP based on material twins
- (2020) Wei Huang et al. COMPOSITE STRUCTURES
- A comparative study of a quasi 3D woven composite with UD and 2D woven laminates
- (2020) Wu Zhou et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A novel failure criterion based upon forming limit curve for thermoplastic composites
- (2020) Zhen Wang et al. COMPOSITES PART B-ENGINEERING
- Development of an S-specimen geometry for shear testing of woven thermoplastic composites
- (2020) John Holmes et al. COMPOSITES PART B-ENGINEERING
- High velocity impact response of hybridized pseudo-woven carbon fiber composite architectures
- (2020) Cyrus Vakili Rad et al. COMPOSITES PART B-ENGINEERING
- Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings
- (2020) Guowei Zhou et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography
- (2020) E Schöberl et al. JOURNAL OF COMPOSITE MATERIALS
- Dynamic three-dimensional imaging and digital volume correlation analysis to quantify shear bands in grus
- (2020) Chengsheng Li et al. MECHANICS OF MATERIALS
- 3D SIFT aided path independent digital volume correlation and its GPU acceleration
- (2020) Junrong Yang et al. OPTICS AND LASERS IN ENGINEERING
- Detecting damage initiation in short fiber composites via in-situ X-ray tomography and digital volume correlation
- (2020) Ronald F. Agyei et al. COMPOSITES COMMUNICATIONS
- Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites
- (2020) Guowei Zhou et al. COMPOSITE STRUCTURES
- Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming
- (2020) J.V. Viisainen et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Deformation measurement in the presence of discontinuities with digital image correlation: A review
- (2020) Ghulam Mubashar Hassan OPTICS AND LASERS IN ENGINEERING
- Digital image correlation (DIC) for measurement of strains and displacements in coarse, low volume-fraction FRP composites used in civil infrastructure
- (2019) Enrique del Rey Castillo et al. COMPOSITE STRUCTURES
- Multiscale surrogate-based framework for reliability analysis of unidirectional FRP composites
- (2019) Sadik L. Omairey et al. COMPOSITES PART B-ENGINEERING
- 3D Strain Mapping of Opaque Materials Using an Improved Digital Volumetric Speckle Photography Technique with X-Ray Microtomography
- (2019) Lingtao Mao et al. Applied Sciences-Basel
- Anisotropic self-adaptive digital volume correlation with optimal cuboid subvolumes
- (2019) Bo Wang et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Progression of X-ray computed tomography from medical imaging to current status in dimensional metrology
- (2019) Herminso Villarraga-Gómez et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Digital Image Correlation Applications in Composite Automated Manufacturing, Inspection, and Testing
- (2019) Farjad Shadmehri et al. Applied Sciences-Basel
- Design of an uncontaminated textile CFRP specimen optimised for both mechanical testing and X-ray microtomography
- (2019) N.T. Chowdhury et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Influence of tab debonding on measured stiffness evolution in Compression-Compression and Tension-Compression fatigue testing of short gauge length coupons
- (2019) R.D.B. Sevenois et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Polymerization shrinkage of resin-based composites for dental restorations: A digital volume correlation study
- (2019) Marta Gallo et al. DENTAL MATERIALS
- Successes and challenges in non-destructive testing of aircraft composite structures
- (2019) Hossein TOWSYFYAN et al. Chinese Journal of Aeronautics
- Effect of fiber architecture on tensile fracture of 3D woven textile composites
- (2019) M. Pankow et al. COMPOSITE STRUCTURES
- Effect of automated fiber placement (AFP) manufacturing signature on mechanical performance of composite structures
- (2019) Minh Hoang Nguyen et al. COMPOSITE STRUCTURES
- Multiaxial loading on a 3D woven carbon fiber reinforced plastic composite using tensile-torsion tests : Identification of the first damage envelope and associated damage mechanisms
- (2019) Nicolas Tableau et al. COMPOSITE STRUCTURES
- Compression after multiple low velocity impacts of NCF, 2D and 3D woven composites
- (2019) Mohamed Nasr Saleh et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Unveiling hermetic failure of ceramic tubes by digital image correlation and acoustic emission
- (2019) Clifton H. Bumgardner et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Fully experiment-based evaluation of few digital volume correlation techniques
- (2019) Bartosz Powierza et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- The correlation framework: Bridging the gap between modeling and analysis for 3D woven composites
- (2019) Arturo Mendoza et al. COMPOSITE STRUCTURES
- Variational segmentation of textile composite preforms from X-ray computed tomography
- (2019) Jean Bénézech et al. COMPOSITE STRUCTURES
- Development of Modified Arcan Fixture for biaxial loading response of fiber-reinforced composites
- (2019) P. Hao et al. POLYMER TESTING
- Measurements of Plastic Localization by Heaviside-Digital Image Correlation
- (2018) F. Bourdin et al. ACTA MATERIALIA
- A novel fixture for determining the tension/compression-shear failure envelope of multidirectional composite laminates
- (2018) Khong Wui Gan et al. COMPOSITE STRUCTURES
- Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO 2f /SiO 2 composites using single-camera stereo-digital image correlation
- (2018) Liping Yu et al. COMPOSITE STRUCTURES
- A multiscale experimental approach for correlating global and local deformation response in woven composites
- (2018) Behrad Koohbor et al. COMPOSITE STRUCTURES
- Effect of manufacturing defect on mechanical performance of plain weave carbon/epoxy composite based on 3D geometrical reconstruction
- (2018) Panding Wang et al. COMPOSITE STRUCTURES
- Discontinuities as a way to influence the failure mechanisms and tensile performance of hybrid carbon fiber/self-reinforced polypropylene composites
- (2018) Jun Tang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Passive control of wrinkles in woven fabric preforms using a geometrical modification of blank holders
- (2018) A. Rashidi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Quasi-static and fatigue performance of carbon fibre reinforced highly polymerized thermoplastic epoxy
- (2018) Hironori Nishida et al. COMPOSITES PART B-ENGINEERING
- Influence of matrix ductility and toughness on strain energy release rate and failure behavior of woven-ply reinforced thermoplastic structures at high temperature
- (2018) B. Vieille et al. COMPOSITES PART B-ENGINEERING
- X-ray computed tomography of polymer composites
- (2018) S.C. Garcea et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Crossed investigation of damage in composites with embedded quantum resistive strain sensors (sQRS), acoustic emission (AE) and digital image correlation (DIC)
- (2018) S. Nag-Chowdhury et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Influence of Camera Rotation on Stereo-DIC and Compensation Methods
- (2018) R. Balcaen et al. EXPERIMENTAL MECHANICS
- Digital Volume Correlation: Review of Progress and Challenges
- (2018) A. Buljac et al. EXPERIMENTAL MECHANICS
- Scalable measurements of tow architecture variability in braided ceramic composite tubes
- (2018) Frederick M. Heim et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals
- (2018) Bing Pan MEASUREMENT SCIENCE and TECHNOLOGY
- Morphological evolution and internal strain mapping of pomelo peel using X-ray computed tomography and digital volume correlation
- (2018) B. Wang et al. MATERIALS & DESIGN
- An experimental study on the manufacture and characterization of in-plane fibre-waviness defects in composites
- (2018) W. J. R. Christian et al. Royal Society Open Science
- The effect of off-axis angles on the mesoscale deformation response and failure behavior of an orthotropic textile carbon-epoxy composite
- (2018) Jishen Yang et al. COMPOSITE STRUCTURES
- Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle
- (2018) Mahoor Mehdikhani et al. COMPOSITES PART B-ENGINEERING
- Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation
- (2018) Fan Wan et al. CERAMICS INTERNATIONAL
- Differentiating 3D textile composites: A novel field of application for Digital Volume Correlation
- (2018) Arturo Mendoza et al. COMPOSITE STRUCTURES
- Self-Adaptive Digital Volume Correlation for Unknown Deformation Fields
- (2018) B. Wang et al. EXPERIMENTAL MECHANICS
- FRP-to-FRP bond characterization and force-based bond length model
- (2018) Alaukik Singh et al. COMPOSITE STRUCTURES
- Modelling the in-plane strain rate dependent behaviour of woven composites with special emphasis on the non-linear shear response
- (2018) F. Martínez-Hergueta et al. COMPOSITE STRUCTURES
- Progressive failure of inter-woven carbon-Dyneema fabric reinforced hybrid composites
- (2018) M. Cao et al. COMPOSITE STRUCTURES
- Shear response of 3D non-woven carbon fibre reinforced composites
- (2018) Lucas R. Meza et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- In-Situ Systematic Error Correction for Digital Volume Correlation Using a Reference Sample
- (2017) B. Wang et al. EXPERIMENTAL MECHANICS
- A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation
- (2017) Y.L. Dong et al. EXPERIMENTAL MECHANICS
- DIC Challenge: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses
- (2017) P. L. Reu et al. EXPERIMENTAL MECHANICS
- On the choice of boundary conditions for micromechanical simulations based on 3D imaging
- (2017) Modesar Shakoor et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- High-speed 3D digital image correlation vibration measurement: Recent advancements and noted limitations
- (2017) Timothy J. Beberniss et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Whole-field thickness strain measurement using multiple camera digital image correlation system
- (2017) Junrui Li et al. OPTICS AND LASERS IN ENGINEERING
- Full-frame, high-speed 3D shape and deformation measurements using stereo-digital image correlation and a single color high-speed camera
- (2017) Liping Yu et al. OPTICS AND LASERS IN ENGINEERING
- Experimental Investigation of Delamination Growth in Composite Laminates under a Compressive Load
- (2017) A. Riccio et al. Advances in Materials Science and Engineering
- Precision of Digital Volume Correlation Approaches for Strain Analysis in Bone Imaged with Micro-Computed Tomography at Different Dimensional Levels
- (2017) Enrico Dall’Ara et al. Frontiers in Materials
- A comparative study of twill weave reinforced composites under tension–tension fatigue loading: Experiments and meso-modelling
- (2016) J. Xu et al. COMPOSITE STRUCTURES
- On the influence of fabric layer shifts on the strain distributions in a multi-layer woven composite
- (2016) Aurélien Doitrand et al. COMPOSITE STRUCTURES
- Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation
- (2016) Mahoor Mehdikhani et al. COMPOSITE STRUCTURES
- Characterising the loading direction sensitivity of 3D woven composites: Effect of z-binder architecture
- (2016) Mohamed Nasr Saleh et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental and numerical investigations of strain rate effects on mechanical properties of LGFRP composite
- (2016) Shuyong Duan et al. COMPOSITES PART B-ENGINEERING
- Viscoelastic viscoplastic model for aeronautical thermoplastic laminates at high temperature: Validation on high stress gradient structures
- (2016) B. Vieille et al. COMPOSITES PART B-ENGINEERING
- Strain mapping at the micro-scale in hierarchical polymer composites with aligned carbon nanotube grafted fibers
- (2016) Mahoor Mehdikhani et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A new method for limit point determination in composite materials containing defects using image correlation
- (2016) Rani F. Elhajjar et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effects of layer shift and yarn path variability on mechanical properties of a twill weave composite
- (2016) MY Matveev et al. JOURNAL OF COMPOSITE MATERIALS
- In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
- (2016) L. Saucedo-Mora et al. JOURNAL OF NUCLEAR MATERIALS
- Effects of Preform Shear on Tensile Properties of a Woven C/SiC Composite
- (2016) John H. Shaw et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Multi-scale damage modelling in a ceramic matrix composite using a finite-element microstructure meshfree methodology
- (2016) L. Saucedo-Mora et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Recent advances in modeling and experiments of Kevlar ballistic fibrils, fibers, yarns and flexible woven textile fabrics – a review
- (2016) Subramani Sockalingam et al. TEXTILE RESEARCH JOURNAL
- Interior strain analysis of a woven composite beam using X-ray computed tomography and digital volumetric speckle photography
- (2015) Lingtao Mao et al. COMPOSITE STRUCTURES
- Full-field strain measurements and meso-FE modelling of hybrid carbon/self-reinforced polypropylene
- (2015) Seyed Ahmad Tabatabaei et al. COMPOSITE STRUCTURES
- Comparing experimental results to a numerical meso-scale approach for woven fiber reinforced plastics
- (2015) B. Stier et al. COMPOSITE STRUCTURES
- Open hole quasi-static and fatigue characterisation of 3D woven composites
- (2015) S. Dai et al. COMPOSITE STRUCTURES
- Experimental investigation of three-dimensional woven composites
- (2015) Kyle C. Warren et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effects of weave architecture on mechanical response of 2D ceramic composites
- (2015) Michael N. Rossol et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Heterogeneity of discontinuous carbon fibre composites: Damage initiation captured by Digital Image Correlation
- (2015) K. Johanson et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Nesting effect on the mode II fracture toughness of woven laminates
- (2015) Mireia Olave et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Estimating mechanical properties of 2D triaxially braided textile composites based on microstructure properties
- (2015) Zachary T. Kier et al. COMPOSITES PART B-ENGINEERING
- Experimental characterization and numerical modeling of damage at the mesoscopic scale of woven polymer matrix composites under quasi-static tensile loading
- (2015) A. Doitrand et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A Technique for Coupled Thermomechanical Response Measurement Using Infrared Thermography and Digital Image Correlation (TDIC)
- (2015) N. Cholewa et al. EXPERIMENTAL MECHANICS
- Recent Advances and Perspectives in Digital Image Correlation
- (2015) M. A. Sutton et al. EXPERIMENTAL MECHANICS
- Comparison of Subset-Based Local and Finite Element-Based Global Digital Image Correlation
- (2015) B. Pan et al. EXPERIMENTAL MECHANICS
- Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
- (2015) J. Blaber et al. EXPERIMENTAL MECHANICS
- High strain rate behaviour of 5-harness-satin weave fabric carbon–epoxy composite under compression and combined compression–shear loading
- (2015) H. Koerber et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Three-Dimensional Local Measurements of Bone Strain and Displacement: Comparison of Three Digital Volume Correlation Approaches
- (2015) Marco Palanca et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
- (2015) R Muñoz et al. JOURNAL OF COMPOSITE MATERIALS
- Fibre–matrix interfaces in carbon fibre reinforced PPS composites: damage initiation and propagation in tensile tests
- (2014) Paola Carnevale et al. COMPOSITE INTERFACES
- Mechanical modelling of 3D woven composites considering realistic unit cell geometry
- (2014) S.D. Green et al. COMPOSITE STRUCTURES
- Fracture Behavior of Prestressed Composites Subjected to Shock Loading: A DIC-Based Study
- (2014) S. Mallon et al. EXPERIMENTAL MECHANICS
- Three-Dimensional Investigation of Free-Edge Effects in Laminate Composites Using X-ray Tomography and Digital Volume Correlation
- (2014) P. Lecomte-Grosbras et al. EXPERIMENTAL MECHANICS
- Projection Savings in CT-based Digital Volume Correlation
- (2014) H. Leclerc et al. EXPERIMENTAL MECHANICS
- A Fast Iterative Digital Volume Correlation Algorithm for Large Deformations
- (2014) E. Bar-Kochba et al. EXPERIMENTAL MECHANICS
- Measurement of In Situ-Full-Field Strain Maps on Ceramic Matrix Composites at Elevated Temperature Using Digital Image Correlation
- (2014) P. Meyer et al. EXPERIMENTAL MECHANICS
- Glass fiber-reinforced polymer composites – a review
- (2014) TP Sathishkumar et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Characterizing In-Plane Geometrical Variability in Textile Ceramic Composites
- (2014) Michael N. Rossol et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Effects of Tow-Scale Holes on the Mechanical Performance of a 3D Woven C/SiC Composite
- (2014) John H. Shaw et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Techniques in helical scanning, dynamic imaging and image segmentation for improved quantitative analysis with X-ray micro-CT
- (2014) Adrian Sheppard et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Quantitative X-ray tomography
- (2013) E. Maire et al. INTERNATIONAL MATERIALS REVIEWS
- High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation
- (2013) F. Mortazavi et al. OPTICS AND LASERS IN ENGINEERING
- Forming studies of carbon fibre composite sheets in dome forming processes
- (2012) S. Davey et al. COMPOSITE STRUCTURES
- Identification of the Out-of-Plane Shear Modulus of a 3D Woven Composite
- (2012) R. Gras et al. EXPERIMENTAL MECHANICS
- Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites
- (2012) V. P. Rajan et al. EXPERIMENTAL MECHANICS
- Comparison of Local and Global Approaches to Digital Image Correlation
- (2012) F. Hild et al. EXPERIMENTAL MECHANICS
- Interlaminar/interfiber failure of unidirectional glass fiber reinforced composites used for wind turbine blades
- (2012) Martin Leong et al. JOURNAL OF COMPOSITE MATERIALS
- Local strain in a 5-harness satin weave composite under static tension: Part II – Meso-FE analysis
- (2011) S. Daggumati et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Local strain in a 5-harness satin weave composite under static tension: Part I – Experimental analysis
- (2011) S. Daggumati et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Comparative study on the behavior of woven-ply reinforced thermoplastic or thermosetting laminates under severe environmental conditions
- (2011) B. Vieille et al. MATERIALS & DESIGN
- Development of self-reinforced polymer composites
- (2011) Chengcheng Gao et al. PROGRESS IN POLYMER SCIENCE
- Notched behaviour of discontinuous carbon fibre composites: Comparison with quasi-isotropic non-crimp fabric
- (2010) C. Qian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements
- (2009) Bing Pan et al. OPTICS AND LASERS IN ENGINEERING
- The effect of out-of-plane motion on 2D and 3D digital image correlation measurements
- (2008) M.A. Sutton et al. OPTICS AND LASERS IN ENGINEERING
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started