- Home
- Publications
- Publication Search
- Publication Details
Title
Quantitative X-ray tomography
Authors
Keywords
-
Journal
INTERNATIONAL MATERIALS REVIEWS
Volume 59, Issue 1, Pages 1-43
Publisher
Informa UK Limited
Online
2013-11-05
DOI
10.1179/1743280413y.0000000023
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A novel architecture for pore network modelling with applications to permeability of porous media
- (2013) Andrey P. Jivkov et al. JOURNAL OF HYDROLOGY
- Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis
- (2013) T. Lowe et al. Journal of the Royal Society Interface
- Revealing the three dimensional internal structure of aluminium alloys
- (2013) George Edward Thompson et al. SURFACE AND INTERFACE ANALYSIS
- Polycrystal model of the mechanical behavior of a Mo–TiC30 vol.% metal–ceramic composite using a three-dimensional microstructure map obtained by dual beam focused ion beam scanning electron microscopy
- (2012) D. Cédat et al. ACTA MATERIALIA
- Quantifying the effect of porosity on the evolution of deformation and damage in Sn-based solder joints by X-ray microtomography and microstructure-based finite element modeling
- (2012) E. Padilla et al. ACTA MATERIALIA
- Observation of recovery and recrystallization in high-purity aluminum measured with forward modeling analysis of high-energy diffraction microscopy
- (2012) Christopher M. Hefferan et al. ACTA MATERIALIA
- A laboratory system for element specific hyperspectral X-ray imaging
- (2012) Simon D. M. Jacques et al. ANALYST
- Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites
- (2012) Rajneesh Sharma et al. CARBON
- A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage
- (2012) D.J. Bull et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
- (2012) Erdem Coleri et al. CONSTRUCTION AND BUILDING MATERIALS
- Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques
- (2012) Felix Hofmann et al. International Journal of Materials Research
- In-situ X-ray microtomography study of the movement of a granular material within a die
- (2012) Samuel A. McDonald et al. International Journal of Materials Research
- Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
- (2012) Michel Suéry et al. JOM
- Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys
- (2012) C. Puncreobutr et al. JOM
- Diffraction microcomputed tomography of an Al-matrix SiC-monofilament composite
- (2012) Stuart R. Stock et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Diffraction/scattering computed tomography for three-dimensional characterization of multi-phase crystalline and amorphous materials
- (2012) M. Álvarez-Murga et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Zone-doubled Fresnel zone plates for high-resolution hard X-ray full-field transmission microscopy
- (2012) Joan Vila-Comamala et al. JOURNAL OF SYNCHROTRON RADIATION
- A hard X-ray nanoprobe beamline for nanoscale microscopy
- (2012) Robert P. Winarski et al. JOURNAL OF SYNCHROTRON RADIATION
- Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
- (2012) P. R. Shearing et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Macro and intergranular stress responses of austenitic stainless steel to 90° strain path changes
- (2012) D. Gonzalez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy
- (2012) D. Tolnai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review
- (2012) C Betts MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure-Based Models for Multi-Functional Material Systems
- (2012) M. D. Sarzynski et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Characterization of multi-scale microstructural features in Opalinus Clay
- (2012) Lukas M. Keller et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Real space soft x-ray imaging at 10 nm spatial resolution
- (2012) W. Chao et al. OPTICS EXPRESS
- Theoretical comparison of three X-ray phase-contrast imaging techniques: propagation-based imaging, analyzer-based imaging and grating interferometry
- (2012) P. C. Diemoz et al. OPTICS EXPRESS
- Hard-X-ray imaging optics based on four aspherical mirrors with 50 nm resolution
- (2012) Satoshi Matsuyama et al. OPTICS EXPRESS
- Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite
- (2012) P. J. Withers et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography
- (2012) C. Landron et al. SCRIPTA MATERIALIA
- Improving the Estimations of Petrophysical Transport Behavior of Carbonate Rocks Using a Dual Pore Network Approach Combined with Computed Microtomography
- (2012) D. Bauer et al. TRANSPORT IN POROUS MEDIA
- In-Line Phase-Contrast X-ray Imaging and Tomography for Materials Science
- (2012) Sheridan C. Mayo et al. Materials
- Characterization of hierarchical pore structures in ceramics using multiscale tomography
- (2011) F. Tariq et al. ACTA MATERIALIA
- Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model
- (2011) D. Tsarouchas et al. ACTA MATERIALIA
- Three-dimensional in situ observations of short fatigue crack growth in magnesium
- (2011) A. King et al. ACTA MATERIALIA
- Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels
- (2011) C. Landron et al. ACTA MATERIALIA
- Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
- (2011) Z. Asghar et al. ACTA MATERIALIA
- 3D Crack-tip Microscopy: Illuminating Micro-Scale Effects on Crack-Tip Behavior
- (2011) Philip J. Withers ADVANCED ENGINEERING MATERIALS
- Resolving the Three-Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer-Scale X-ray Computed Tomography
- (2011) William K. Epting et al. ADVANCED FUNCTIONAL MATERIALS
- Dynamic X-Ray Diffraction Computed Tomography Reveals Real-Time Insight into Catalyst Active Phase Evolution
- (2011) Simon D. M. Jacques et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography
- (2011) J. A. Dunlop et al. Biology Letters
- Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image
- (2011) J. Escoda et al. CEMENT AND CONCRETE RESEARCH
- The influence of nanoscale microstructural variations on the pellet scale flow properties of hierarchical porous catalytic structures using multiscale 3D imaging
- (2011) F. Tariq et al. CHEMICAL ENGINEERING SCIENCE
- X-ray damage characterisation in self-healing fibre reinforced polymers
- (2011) G.P. McCombe et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior
- (2011) M. Milesi et al. COMPUTATIONAL MATERIALS SCIENCE
- In situ tomographic investigation on the early hydration behaviors of cementing systems
- (2011) D. Gastaldi et al. CONSTRUCTION AND BUILDING MATERIALS
- Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic–viscoplastic–viscodamage model
- (2011) Taesun You et al. CONSTRUCTION AND BUILDING MATERIALS
- Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature
- (2011) P. R. Shearing et al. ELECTROCHEMICAL AND SOLID STATE LETTERS
- Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
- (2011) Eric Maire et al. ENGINEERING FRACTURE MECHANICS
- Observing strain localisation processes in bio-cemented sand using x-ray imaging
- (2011) Francesco Tagliaferri et al. GRANULAR MATTER
- DART: A Practical Reconstruction Algorithm for Discrete Tomography
- (2011) K. J. Batenburg et al. IEEE TRANSACTIONS ON IMAGE PROCESSING
- LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS
- (2011) Aurelie Jean et al. International Journal for Multiscale Computational Engineering
- Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy
- (2011) N. Vanderesse et al. INTERNATIONAL JOURNAL OF FATIGUE
- Damage tolerant design of cast components based on defects detected by 3D X-ray computed tomography
- (2011) M. Shirani et al. INTERNATIONAL JOURNAL OF FATIGUE
- Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams
- (2011) Mo Bai et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Freeze casting of porous materials: review of critical factors in microstructure evolution
- (2011) W L Li et al. INTERNATIONAL MATERIALS REVIEWS
- Characterization of creep and creep damage by in-situ microtomography
- (2011) András Borbély et al. JOM
- High-energy diffraction microscopy at the advanced photon source
- (2011) U. Lienert et al. JOM
- 3D real-time micromechanical compressive behaviour of bone–cement interface: Experimental and finite element studies
- (2011) Gianluca Tozzi et al. JOURNAL OF BIOMECHANICS
- Numerical simulation of asphalt mixture based on three-dimensional heterogeneous specimen
- (2011) Xiao-ning Zhang et al. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY
- Random geometric graphs for modelling the pore space of fibre-based materials
- (2011) Ralf Thiedmann et al. JOURNAL OF MATERIALS SCIENCE
- Computational multiscale modeling of intergranular cracking
- (2011) Igor Simonovski et al. JOURNAL OF NUCLEAR MATERIALS
- Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal cycling based on nano-computed tomography
- (2011) Yong Guan et al. JOURNAL OF POWER SOURCES
- Digital volume correlation analyses of synchrotron tomographic images
- (2011) J Réthoré et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
- (2011) J V Bernier et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Quantification of a Single Aggregate Inner Porosity and Pore Accessibility Using Hard X-ray Phase-Contrast Nanotomography
- (2011) Pavel Trtik et al. LANGMUIR
- Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
- (2011) Jette Oddershede et al. MATERIALS CHARACTERIZATION
- Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
- (2011) C. Veyhl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A mesoscale quantification method of cavitation in semicrystalline polymers using X-ray microtomography
- (2011) E. Rosenberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Three-Dimensional Analysis of High-Resolution X-Ray Computed Tomography Data with Morpho+
- (2011) Loes Brabant et al. MICROSCOPY AND MICROANALYSIS
- In Situ X-Ray Tomography Studies of Microstructural Evolution Combined with 3D Modeling
- (2011) J.-Y. Buffière et al. MRS BULLETIN
- Resolution effect on the study of ductile damage using synchrotron X-ray tomography
- (2011) C. Landron et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales
- (2011) E. A. Zimmermann et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Experimental facility for two- and three-dimensional ultrafast electron beam x-ray computed tomography
- (2011) T. Stürzel et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- A method for the 3-D quantification of bridging ligaments during crack propagation
- (2011) L. Babout et al. SCRIPTA MATERIALIA
- Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography
- (2011) T.F. Morgeneyer et al. SCRIPTA MATERIALIA
- Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
- (2011) M. Syha et al. SCRIPTA MATERIALIA
- Exploring microstructural changes associated with oxidation in Ni–YSZ SOFC electrodes using high resolution X-ray computed tomography
- (2011) P.R. Shearing et al. SOLID STATE IONICS
- Grain-scale experimental investigation of localised deformation in sand: a discrete particle tracking approach
- (2011) Edward Andò et al. Acta Geotechnica
- Hierarchically structured titanium foams for tissue scaffold applications
- (2010) R. Singh et al. Acta Biomaterialia
- Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation
- (2010) Nathalie Limodin et al. ACTA MATERIALIA
- The evolution of crack-tip stresses during a fatigue overload event
- (2010) A. Steuwer et al. ACTA MATERIALIA
- Permeability, pore connectivity and critical pore throat control of expandable polymeric sphere templated macroporous alumina
- (2010) Linnéa Andersson et al. ACTA MATERIALIA
- In situ observation of ductile fracture using X-ray tomography technique
- (2010) H. Toda et al. ACTA MATERIALIA
- Void growth in copper during high-temperature power-law creep
- (2010) K. Dzieciol et al. ACTA MATERIALIA
- 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
- (2010) Michael Herbig et al. ACTA MATERIALIA
- 3-D observations of short fatigue crack interaction with la2mellar and duplex microstructures in a two-phase titanium alloy
- (2010) S. Birosca et al. ACTA MATERIALIA
- Analysis of Snow Microstructure by Means of X-Ray Diffraction Contrast Tomography
- (2010) Sabine Rolland du Roscoat et al. ADVANCED ENGINEERING MATERIALS
- Applying SEM-Based X-ray Microtomography to Observe Self-Healing in Solvent Encapsulated Thermoplastic Materials
- (2010) Steven D. Mookhoek et al. ADVANCED ENGINEERING MATERIALS
- Combined Use of Synchrotron-Radiation-Based Imaging Techniques for the Characterization of Structured Catalysts
- (2010) Francesco Basile et al. ADVANCED FUNCTIONAL MATERIALS
- Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading
- (2010) N. Michailidis et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- A virtual experimental approach to estimate composite mechanical properties: Modeling with an explicit finite element method
- (2010) Boming Zhang et al. COMPUTATIONAL MATERIALS SCIENCE
- Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images
- (2010) Qingli Dai CONSTRUCTION AND BUILDING MATERIALS
- The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography
- (2010) S.P. Knight et al. CORROSION SCIENCE
- Threshold Fine-Tuning and 3D Characterisation of Porous Media Using X-ray Nanotomography
- (2010) Hossein Ostadi et al. Current Nanoscience
- Towards High Performance Digital Volume Correlation
- (2010) M. Gates et al. EXPERIMENTAL MECHANICS
- Voxel-Scale Digital Volume Correlation
- (2010) H. Leclerc et al. EXPERIMENTAL MECHANICS
- In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
- (2010) J. -Y. Buffiere et al. EXPERIMENTAL MECHANICS
- Analysis of coke under compressive loading: A combined approach using micro-computed tomography, finite element analysis, and empirical models of porous structures
- (2010) Naomi Tsafnat et al. FUEL
- Discrete and continuum analysis of localised deformation in sand using X-ray μCT and volumetric digital image correlation
- (2010) S.A. HALL et al. GEOTECHNIQUE
- In-situ observation of creep damage evolution in Al–Al2O3MMCs by synchrotron X-ray microtomography
- (2010) M. Huppmann et al. International Journal of Materials Research
- Fast in-situ X-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures
- (2010) Michel Suéry et al. International Journal of Materials Research
- Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms
- (2010) S.-B. Lee et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques
- (2010) W. Ludwig et al. JOM
- Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction
- (2010) Jette Oddershede et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- The direct examination of three-dimensional bone architecture in vitro by computed tomography
- (2010) Lee A. Feldkamp et al. JOURNAL OF BONE AND MINERAL RESEARCH
- Quantification of porosity in Acropora pulchra (Brook 1891) using X-ray micro-computed tomography techniques
- (2010) Ronan C. Roche et al. JOURNAL OF EXPERIMENTAL MARINE BIOLOGY AND ECOLOGY
- Region-of-interest tomography using filtered backprojection: assessing the practical limits
- (2010) A. KYRIELEIS et al. JOURNAL OF MICROSCOPY
- X-ray computed tomography-based modeling of polymeric foams: The effect of finite element model size on the large strain response
- (2010) J. G. F. Wismans et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Analysis of the three-dimensional microstructure of a solid-oxide fuel cell anode using nano X-ray tomography
- (2010) Yong Guan et al. JOURNAL OF POWER SOURCES
- Mechanical behavior of ceramic veneer in zirconia-based restorations: A 3- dimensional finite element analysis using microcomputed tomography data
- (2010) Eduardo Passos Rocha et al. JOURNAL OF PROSTHETIC DENTISTRY
- A prioriinformation in a regularized sinogram-based method for removing ring artefacts in tomography
- (2010) Sofya Titarenko et al. JOURNAL OF SYNCHROTRON RADIATION
- Synchrotron radiation computed laminography for polymer composite failure studies
- (2010) Feng Xu et al. JOURNAL OF SYNCHROTRON RADIATION
- Proposal of a method to analyze 3D deformation/fracture characteristics inside materials based on a stratified matching approach
- (2010) Mitsuru Nakazawa et al. MACHINE VISION AND APPLICATIONS
- Ultra-small angle neutron scattering and X-ray tomography studies of caseinate–hydroxyapatite microporous materials
- (2010) C. Ritzoulis et al. MATERIALS CHEMISTRY AND PHYSICS
- The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloy
- (2010) Z. Asghar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing
- (2010) Yoshihiko Hangai et al. MATERIALS TRANSACTIONS
- Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography
- (2010) Insu Jeon et al. MECHANICS OF MATERIALS
- Three-Dimensional Microstructure Visualization of Porosity and Fe-Rich Inclusions in SiC Particle-Reinforced Al Alloy Matrix Composites by X-Ray Synchrotron Tomography
- (2010) Flávio de Andrade Silva et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Nanoscale X-Ray Microscopic Imaging of Mammalian Mineralized Tissue
- (2010) Joy C. Andrews et al. MICROSCOPY AND MICROANALYSIS
- Zernike phase contrast in scanning microscopy with X-rays
- (2010) Christian Holzner et al. Nature Physics
- In situ investigation of ceramic sintering by synchrotron radiation X-ray computed tomography
- (2010) Feng Xu et al. OPTICS AND LASERS IN ENGINEERING
- Combining X-ray microtomography with computer simulation for analysis of granular and porous materials
- (2010) Roberto Moreno-Atanasio et al. Particuology
- In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension
- (2010) Samuel A. McDonald et al. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
- Tests of microstructure reconstruction by forward modeling of high energy X-ray diffraction microscopy data
- (2010) C. M. Hefferan et al. POWDER DIFFRACTION
- Characterization and modeling of void nucleation by interface decohesion in dual phase steels
- (2010) C. Landron et al. SCRIPTA MATERIALIA
- Combining tomographic imaging and DEM simulations to investigate the structure of experimental sphere packings
- (2010) Gary W. Delaney et al. Soft Matter
- In vivo corrosion and corrosion protection of magnesium alloy LAE442☆
- (2009) F. Witte et al. Acta Biomaterialia
- Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images
- (2009) Nathalie Limodin et al. ACTA MATERIALIA
- Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
- (2009) H. Toda et al. ACTA MATERIALIA
- An X-ray microtomographic and finite element modeling approach for the prediction of semi-solid deformation behaviour in Al–Cu alloys
- (2009) D. Fuloria et al. ACTA MATERIALIA
- Three-dimensional analysis of a compression test on stone wool
- (2009) François Hild et al. ACTA MATERIALIA
- Using image-based computational modeling to study microstructure–yield correlations in metals
- (2009) M.A. Siddiq Qidwai et al. ACTA MATERIALIA
- Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy
- (2009) P. Li et al. ACTA MATERIALIA
- Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction
- (2009) S. Birosca et al. ACTA MATERIALIA
- Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography
- (2009) Z. Asghar et al. ACTA MATERIALIA
- In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al–10wt.% Cu alloy
- (2009) N. Limodin et al. ACTA MATERIALIA
- Coarsening mechanisms in a dendritic Al–10% Cu alloy
- (2009) S. Terzi et al. ACTA MATERIALIA
- Constituent Particle Break-Up During Hot Rolling of AA 5182
- (2009) Nicolas Moulin et al. ADVANCED ENGINEERING MATERIALS
- Iterative Reconstruction Technique for Reducing Body Radiation Dose at CT: Feasibility Study
- (2009) Amy K. Hara et al. AMERICAN JOURNAL OF ROENTGENOLOGY
- Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X-Ray Microtomography, Nanoindentation, and Finite Element Analysis
- (2009) Phillip L. Manning et al. Anatomical Record-Advances in Integrative Anatomy and Evolutionary Biology
- Beam hardening artifacts in micro-computed tomography scanning can be reduced by X-ray beam filtration and the resulting images can be used to accurately measure BMD
- (2009) Jeffrey A. Meganck et al. BONE
- Three dimensional experimental and numerical multiscale analysis of a fatigue crack
- (2009) Johann Rannou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A review of algorithms for medical image segmentation and their applications to the female pelvic cavity
- (2009) Zhen Ma et al. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
- Evaluation of three-dimensional and two-dimensional full displacement fields of a single edge notch fracture mechanics specimen, in light of experimental data using X-ray tomography
- (2009) Yoann Barranger et al. ENGINEERING FRACTURE MECHANICS
- Prediction of residual fatigue life of aluminium foam through natural frequencies and damping shift
- (2009) V. DATTOMA et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis
- (2009) F. Fischer et al. JOURNAL OF CELLULAR PLASTICS
- Morphological analysis of pores in directionally freeze-cast titanium foams
- (2009) J.L. Fife et al. JOURNAL OF MATERIALS RESEARCH
- Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks
- (2009) S Roux et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels
- (2009) A. Stiénon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In situ single-grain peak profile measurements on Ti–7Al during tensile deformation
- (2009) U. Lienert et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources
- (2009) A. Kyrieleis et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
- X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites
- (2009) T.E. Wilkes et al. PHILOSOPHICAL MAGAZINE
- Evolution of stress in individual grains and twins in a magnesium alloy aggregate
- (2009) C. C. Aydıner et al. PHYSICAL REVIEW B
- Soft-tissue phase-contrast tomography with an x-ray tube source
- (2009) Martin Bech et al. PHYSICS IN MEDICINE AND BIOLOGY
- Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis
- (2009) W. Ludwig et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Local crack driving force analysis of a fatigue crack by a microstructural tracking method
- (2009) P. Qu et al. SCRIPTA MATERIALIA
- Direct non-destructive observation of bulk nucleation in 30% deformed aluminum
- (2009) S.S. West et al. SCRIPTA MATERIALIA
- Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick–Baez optics
- (2009) G. Requena et al. SCRIPTA MATERIALIA
- In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
- (2009) S. Terzi et al. SCRIPTA MATERIALIA
- Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite
- (2008) L. Babout et al. ACTA MATERIALIA
- Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials
- (2008) A. Weck et al. ACTA MATERIALIA
- Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography
- (2008) E. Maire et al. ACTA MATERIALIA
- Modeling the properties of closed-cell cellular materials from tomography images using finite shell elements
- (2008) O. Caty et al. ACTA MATERIALIA
- Analytical Modelling of the Radiative Properties of Metallic Foams: Contribution of X-Ray Tomography
- (2008) M. Loretz et al. ADVANCED ENGINEERING MATERIALS
- Hard x-rays nanoscale fluorescence imaging of Earth and Planetary science samples
- (2008) Pierre Bleuet et al. APPLIED PHYSICS LETTERS
- Digital laminography assessment of the damage in concrete exposed to freezing temperatures
- (2008) Kentaro Wakimoto et al. CEMENT AND CONCRETE RESEARCH
- Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
- (2008) Essam Totry et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Extended three-dimensional digital image correlation (X3D-DIC)
- (2008) Julien Réthoré et al. COMPTES RENDUS MECANIQUE
- Stress concentrations in non-convex elastic particles embedded in a ductile matrix
- (2008) N. Moulin et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Recent advances in X-ray microtomography applied to materials
- (2008) S. R. Stock INTERNATIONAL MATERIALS REVIEWS
- X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
- (2008) Greg Johnson et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. I. Direct beam case
- (2008) Wolfgang Ludwig et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites
- (2008) P. Wright et al. JOURNAL OF COMPOSITE MATERIALS
- Probing Microstructure Dynamics With X-Ray Diffraction Microscopy
- (2008) R. M. Suter et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Quantifying the 3D macrostructure of tissue scaffolds
- (2008) Julian R. Jones et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Application of a micromechanics model to the overall properties of heterogeneous graphite
- (2008) C. Berre et al. JOURNAL OF NUCLEAR MATERIALS
- Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling
- (2008) C. Berre et al. JOURNAL OF NUCLEAR MATERIALS
- Microstructural modelling of nuclear graphite using multi-phase models
- (2008) C. Berre et al. JOURNAL OF NUCLEAR MATERIALS
- Comparative study of predictive FE methods for mechanical properties of nuclear composites
- (2008) Joshim Ali et al. JOURNAL OF NUCLEAR MATERIALS
- Methods and applications of digital volume correlation
- (2008) B K Bay JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- 3D micro-scale deformations of wood in bending: Synchrotron radiation μCT data analyzed with digital volume correlation
- (2008) F. Forsberg et al. JOURNAL OF STRUCTURAL BIOLOGY
- High-resolution tomography of cracks, voids and micro-structure in greywacke and limestone
- (2008) S. Zabler et al. JOURNAL OF STRUCTURAL GEOLOGY
- Prior image constrained compressed sensing (PICCS): A method to accurately reconstruct dynamic CT images from highly undersampled projection data sets
- (2008) Guang-Hong Chen et al. MEDICAL PHYSICS
- Phase Contrast X-Ray Synchrotron Imaging: Opening Access to Fossil Inclusions in Opaque Amber
- (2008) Malvina Lak et al. MICROSCOPY AND MICROANALYSIS
- Probing the structure of heterogeneous diluted materials by diffraction tomography
- (2008) Pierre Bleuet et al. NATURE MATERIALS
- The true toughness of human cortical bone measured with realistically short cracks
- (2008) K. J. Koester et al. NATURE MATERIALS
- Comparison between X-ray micro-computed tomography and optical scanning tomography for full 3D strain measurement by digital volume correlation
- (2008) Arnaud Germaneau et al. NDT & E INTERNATIONAL
- Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal
- (2008) A. King et al. SCIENCE
- Direct observation of 3-D grain growth in Al–0.1% Mn
- (2008) S. Schmidt et al. SCRIPTA MATERIALIA
- Three-dimensional microtomographic study of Widmanstätten microstructures in an alpha/beta titanium alloy
- (2008) N. Vanderesse et al. SCRIPTA MATERIALIA
- In situ three-dimensional X-ray microtomography of an auxetic foam under tension
- (2008) S.A. McDonald et al. SCRIPTA MATERIALIA
- On the origin of deformation-induced rotation patterns below nanoindents
- (2007) N. Zaafarani et al. ACTA MATERIALIA
- Three-dimensional image correlation from X-ray computed tomography of solid foam
- (2007) Stéphane Roux et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Metallic foams: Radiative properties/comparison between different models
- (2007) M. Loretz et al. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER
- High energy X-ray scattering tomography applied to bone
- (2007) S.R. Stock et al. JOURNAL OF STRUCTURAL BIOLOGY
- Micro-computed tomography of fatigue microdamage in cortical bone using a barium sulfate contrast agent
- (2007) Huijie Leng et al. Journal of the Mechanical Behavior of Biomedical Materials
- Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal
- (2007) K. Haldrup et al. MATERIALS CHARACTERIZATION
- In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography
- (2007) A. Isaac et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The shock response of aluminium foams
- (2007) N.K. Bourne et al. SCRIPTA MATERIALIA
- HIGH RESOLUTION COMPUTED TOMOGRAPHY AND IMPLICATIONS FOR FATIGUE CRACK CLOSURE MODELLING
- (2003) Guvenilir et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started