Nanomaterials by severe plastic deformation: review of historical developments and recent advances
出版年份 2022 全文链接
标题
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
作者
关键词
-
出版物
Materials Research Letters
Volume 10, Issue 4, Pages 163-256
出版商
Informa UK Limited
发表日期
2022-02-17
DOI
10.1080/21663831.2022.2029779
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effects of SMAT at cryogenic and room temperatures on the kink band and martensite formations with associated fatigue resistance in a β-metastable titanium alloy
- (2021) Pierre Maurel et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of high-entropy alloys
- (2021) Weidong Li et al. PROGRESS IN MATERIALS SCIENCE
- High-Pressure Torsion of Non-Equilibrium Hydrogen Storage Materials: A Review
- (2021) Ádám Révész et al. Energies
- Phonon transport in multiphase nanostructured silicon fabricated by high-pressure torsion
- (2021) Cheng Shao et al. JOURNAL OF APPLIED PHYSICS
- Commercialization of bulk nanostructured metals and alloys
- (2021) Terry C. Lowe et al. MRS BULLETIN
- Application of ultrasonic nanocrystal surface modification (UNSM) technique for surface strengthening of titanium and titanium alloys: a mini review
- (2021) Ruyi Liu et al. Journal of Materials Research and Technology-JMR&T
- High entropy alloy nanocomposites produced by high pressure torsion
- (2021) Shabnam Taheriniya et al. ACTA MATERIALIA
- Displacement field measurements in traditional and rotational diamond anvil cells
- (2021) K. K. Pandey et al. JOURNAL OF APPLIED PHYSICS
- Synchrotron X-ray diffraction observation of phase transformation during annealing of Si processed by high-pressure torsion
- (2021) Yoshifumi Ikoma et al. PHILOSOPHICAL MAGAZINE LETTERS
- Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials - sequential nucleation of different deformation modes based on a concept of plaston’ [Scripta Materialia 181 (2020) 35-42/ SMM 13102]
- (2021) Nobuhiro Tsuji et al. SCRIPTA MATERIALIA
- Architectured multi-metal CoCrFeMnNi-Inconel 718 lamellar composite by high-pressure torsion
- (2021) G.M. Karthik et al. SCRIPTA MATERIALIA
- Microstructure, Texture and Mechanical Properties in Aluminum Produced by Friction-Assisted Lateral Extrusion
- (2021) Viet Q. Vu et al. Materials
- Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12with ZT > 1.3
- (2021) Gerda Rogl et al. ACS Applied Energy Materials
- Synergetic strengthening from grain refinement and nano-scale precipitates in non-equiatomic CoCrFeNiMo medium-entropy alloy
- (2021) Hyeonseok Kwon et al. INTERMETALLICS
- Synthesis of biocompatible high-entropy alloy TiNbZrTaHf by high-pressure torsion
- (2021) Jeimmy González-Masís et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain Structure Evolution and Mechanical Properties of Multi-Channel Spiral Twist Extruded AA5083
- (2021) Dina M. Fouad et al. Metals
- High-Pressure Torsion for Synthesis of High-Entropy Alloys
- (2021) Kaveh Edalati et al. Metals
- High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion
- (2021) Saeid Akrami et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: Twins and stacking faults in FCC and dislocations in BCC
- (2021) Payam Edalati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Ultrahigh hardness in nanostructured dual-phase high-entropy alloy AlCrFeCoNiNb developed by high-pressure torsion
- (2021) Payam Edalati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Examination of inverse Hall-Petch relation in nanostructured aluminum alloys by ultra-severe plastic deformation
- (2021) Abbas Mohammadi et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Plasticity of an extra-strong nanocrystalline stainless steel controlled by the “dislocation-segregation” interaction
- (2021) N.A. Enikeev et al. MATERIALS LETTERS
- TiC-reinforced CoCrFeMnNi composite processed by cold-consolidation and subsequent annealing
- (2021) Peyman Asghari-Rad et al. MATERIALS LETTERS
- Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion
- (2021) Parisa Edalati et al. MATERIALS LETTERS
- High-entropy ceramics: Review of principles, production and applications
- (2021) Saeid Akrami et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Severe plastic deformed Pd-based metallic glass for superior hydrogen evolution in both acidic and alkaline media
- (2021) Fei Chu et al. SCRIPTA MATERIALIA
- Defective high-entropy oxide photocatalyst with high activity for CO2 conversion
- (2021) Saeid Akrami et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- Texture evolution in high-pressure torsion processing
- (2021) Hiba Azzeddine et al. PROGRESS IN MATERIALS SCIENCE
- Exploiting tube high-pressure shearing to prepare a microstructure in Pb-Sn alloys for unprecedented superplasticity
- (2021) Kui Lin et al. SCRIPTA MATERIALIA
- Nanostructured Fe–Cr–W Steel Exhibits Enhanced Resistance to Self‐Ion Irradiation
- (2020) Andrey Mazilkin et al. ADVANCED ENGINEERING MATERIALS
- Computational and Experimental Studies on the Effect Back Pressure on Twist Extrusion Process
- (2020) Mehran Nouri et al. METALS AND MATERIALS INTERNATIONAL
- Dynamic Steady State by Unlimited Unidirectional Plastic Deformation of Crystalline Materials Deforming by Dislocation Glide at Low to Moderate Temperatures
- (2020) Javier Gil Sevillano Metals
- High-entropy ceramics
- (2020) Corey Oses et al. Nature Reviews Materials
- The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding
- (2020) Heinz-Werner Höppel et al. ADVANCED ENGINEERING MATERIALS
- Synthesis of Nanostructured TiFe Hydrogen Storage Material by Mechanical Alloying via High‐Pressure Torsion
- (2020) Edgar Ignacio López Gómez et al. ADVANCED ENGINEERING MATERIALS
- New Die Design Configuration for Grain Refinement by Hollow Twist Extrusion (HTE) Process
- (2020) J. Joudaki et al. METALS AND MATERIALS INTERNATIONAL
- Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston
- (2020) Nobuhiro Tsuji et al. SCRIPTA MATERIALIA
- Decade of Twist Channel Angular Pressing: A Review
- (2020) Adéla Macháčková Materials
- FCC phase formation in immiscible Mg–Hf (magnesium–hafnium) system by high-pressure torsion
- (2020) Edgar Ignacio López Gómez et al. AIP Advances
- Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
- (2020) Werner Skrotzki et al. Crystals
- Hydrogen Storage Properties of Mg-Ni Alloys Processed by Fast Forging
- (2020) Patricia de Rango et al. Energies
- Sharp force trauma with two katana swords: identifying the murder weapon by comparing tool marks on the skull bone
- (2020) Matthias Weber et al. INTERNATIONAL JOURNAL OF LEGAL MEDICINE
- HPT production of large bulk skutterudites
- (2020) Gerda Rogl et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improvement of mechanical properties of polylactide by equal channel multiple angular extrusion
- (2020) Iurii Vozniak et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Two-stage Hall-Petch relationship in Cu with recrystallized structure
- (2020) Y.Z. Tian et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Visible-Light Photocurrent in Nanostructured High-Pressure TiO2-II (Columbite) Phase
- (2020) Qing Wang et al. Journal of Physical Chemistry C
- High‐pressure torsion of SiO 2 quartz sand: Phase transformation, optical properties, and significance in geology
- (2020) Qing Wang et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Ultrahigh hardness and biocompatibility of high-entropy alloy TiAlFeCoNi processed by high-pressure torsion
- (2020) Parisa Edalati et al. Materials Science & Engineering C-Materials for Biological Applications
- Achieving highly strengthened Al–Cu–Mg alloy by grain refinement and grain boundary segregation
- (2020) Takahiro Masuda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system
- (2020) Jae-Kyung Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Severe Plastic Deformation under High Pressure: Upsizing Sample Dimensions
- (2020) Zenji Horita et al. MATERIALS TRANSACTIONS
- Atomic processes of shear-coupled migration in {112} twins and vicinal grain boundaries in bcc-Fe
- (2020) N. Kvashin et al. Physical Review Materials
- Strain-induced multivariant martensitic transformations: A scale-independent simulation of interaction between localized shear bands and microstructure
- (2020) S. Ehsan Esfahani et al. ACTA MATERIALIA
- Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer
- (2020) Ruixiao Zheng et al. ACTA MATERIALIA
- In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr
- (2020) K.K. Pandey et al. ACTA MATERIALIA
- Dislocation and grain structure formation in Nb filaments of different geometry at fabrication of Nb3Sn-based superconducting wires
- (2020) E.N. Popova et al. MATERIALS CHARACTERIZATION
- Synthesis of nanostructured biomaterials by high-pressure torsion: Effect of niobium content on microstructure and mechanical properties of Ti-Nb alloys
- (2020) Alexánder Campos-Quirós et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Novel black bismuth oxide (Bi2O3) with enhanced photocurrent generation, produced by high-pressure torsion straining
- (2020) Ikuro Fujita et al. SCRIPTA MATERIALIA
- Heterostructured materials: superior properties from hetero-zone interaction
- (2020) Yuntian Zhu et al. Materials Research Letters
- Enhanced mechanical properties in β-Ti alloy aged from recrystallized ultrafine β grains
- (2020) Bingjie Zhang et al. MATERIALS & DESIGN
- Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: Significance of supersaturation, segregation and precipitation on hardening and electrical conductivity
- (2020) Abbas Mohammadi et al. ACTA MATERIALIA
- Phase transformations, fracture, and other structural changes in inelastic materials
- (2020) Valery I. Levitas INTERNATIONAL JOURNAL OF PLASTICITY
- A powder-metallurgy-based fabrication route towards achieving high tensile strength with ultra-high ductility in high-entropy alloy
- (2020) Peyman Asghari-Rad et al. SCRIPTA MATERIALIA
- Mechanical characterization and interfacial enzymatic activity of AISI 316L stainless steel after surface nanocrystallization
- (2020) Erfan Maleki et al. SURFACE & COATINGS TECHNOLOGY
- How Severe Plastic Deformation Changes the Mechanical Properties of Thermoelectric Skutterudites and Half Heusler Alloys
- (2020) Gerda Rogl et al. Frontiers in Materials
- Influence of shear strain on HPT-processed n-type skutterudites yielding ZT=2.1
- (2020) Gerda Rogl et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effect of neutron irradiation on the impact toughness of austenitic stainless steel in ultrafine-grained state
- (2020) Valentin K. Shamardin et al. JOURNAL OF NUCLEAR MATERIALS
- A Coupled EBSD/TEM Analysis of the Microstructure Evolution of a Gradient Nanostructured Ferritic/Martensitic Steel Subjected to Surface Mechanical Attrition Treatment
- (2019) Wenbo Liu et al. Materials
- Size Effects of High Strength Steel Wires
- (2019) Kanji Ono Metals
- Hydrostatic pressure effects on superconducting transition of nanostructured niobium highly strained by high-pressure torsion
- (2019) Masaki Mito et al. JOURNAL OF APPLIED PHYSICS
- Phase Transformations in MgH2 -TiH2 Hydrogen Storage System by High-Pressure Torsion Process
- (2019) Kouki Kitabayashi et al. ADVANCED ENGINEERING MATERIALS
- Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles
- (2019) Amandine Duchaussoy et al. ACTA MATERIALIA
- Shear driven formation of nano-diamonds at sub-gigapascals and 300 K
- (2019) Yang Gao et al. CARBON
- Hydrostatic tube cyclic expansion extrusion (HTCEE) as a new severe plastic deformation method for producing long nanostructured tubes
- (2019) M. Motallebi Savarabadi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High-pressure torsion assisted segregation and precipitation in a Fe-18Cr-8Ni austenitic stainless steel
- (2019) Andrew Hoffman et al. MATERIALS LETTERS
- Numerical Analysis of a New Nonlinear Twist Extrusion Process
- (2019) Tuncay Yalçinkaya et al. Metals
- Impact of TiO2-II phase stabilized in anatase matrix by high-pressure torsion on electrocatalytic hydrogen production
- (2019) Kaveh Edalati et al. Materials Research Letters
- Sustainable and simple processing technique for n-type skutterudites with high ZT and their analysis
- (2019) Gerda Rogl et al. ACTA MATERIALIA
- Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys
- (2019) Shuhei Yoshida et al. ACTA MATERIALIA
- Effect of Initial Grain Size on Deformation Mechanism during High‐Pressure Torsion in V 10 Cr 15 Mn 5 Fe 35 Co 10 Ni 25 High‐Entropy Alloy
- (2019) Peyman Asghari-Rad et al. ADVANCED ENGINEERING MATERIALS
- Mechanical properties and biological responses of ultrafine-grained pure titanium fabricated by multi-directional forging
- (2019) Yusuke Ito et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Grain Refinement of AZ31 and AZ61 Mg Alloys through Room Temperature Processing by UP-Scaled High-Pressure Torsion
- (2019) Takahiro Masuda et al. MATERIALS TRANSACTIONS
- Severe Plastic Deformation of Amorphous Alloys
- (2019) Ádám Révész et al. MATERIALS TRANSACTIONS
- Severe Plastic Deformation of Polymers
- (2019) V. Beloshenko et al. MATERIALS TRANSACTIONS
- Finite Element Modelling of High-Pressure Torsion: An Overview
- (2019) Pedro Henrique R. Pereira et al. MATERIALS TRANSACTIONS
- Developing Nanostructured Metals for Manufacturing of Medical Implants with Improved Design and Biofunctionality
- (2019) Ruslan Z. Valiev et al. MATERIALS TRANSACTIONS
- Severe Plastic Deformation to Achieve High Strength and High Ductility in Fe–Ni Based Alloys with Lattice Softening
- (2019) Shigeru Kuramoto et al. MATERIALS TRANSACTIONS
- Severe Plastic Deformation of Semiconductor Materials Using High-Pressure Torsion
- (2019) Yoshifumi Ikoma MATERIALS TRANSACTIONS
- High-Pressure Phase Transformations under Severe Plastic Deformation by Torsion in Rotational Anvils
- (2019) Valery I. Levitas MATERIALS TRANSACTIONS
- Corrosion Behavior of Severely Deformed Pure and Single-Phase Materials
- (2019) Hiroyuki Miyamoto et al. MATERIALS TRANSACTIONS
- High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties
- (2019) Andrea Bachmaier et al. MATERIALS TRANSACTIONS
- An Overview on the Continuous Severe Plastic Deformation Methods
- (2019) Ghader Faraji et al. MATERIALS TRANSACTIONS
- Recent Developments in the Application of Surface Mechanical Attrition Treatments for Improved Gradient Structures: Processing Parameters and Surface Reactivity
- (2019) Thierry Grosdidier et al. MATERIALS TRANSACTIONS
- Grain Boundaries and Diffusion Phenomena in Severely Deformed Materials
- (2019) Gerhard Wilde et al. MATERIALS TRANSACTIONS
- High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review
- (2019) Laszlo S. Toth et al. MATERIALS TRANSACTIONS
- Behavior of Nb and Cu–Nb Composites under Severe Plastic Deformation and Annealing
- (2019) V.V. Popov et al. MATERIALS TRANSACTIONS
- Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion
- (2019) Jae-Kyung Han et al. MATERIALS TRANSACTIONS
- The Contribution of Severe Plastic Deformation to Research on Superplasticity
- (2019) Megumi Kawasaki et al. MATERIALS TRANSACTIONS
- Room Temperature Superplaticity in Fine/Ultrafine Grained Materials Subjected to Severe Plastic Deformation
- (2019) M. Demirtas et al. MATERIALS TRANSACTIONS
- Development of Metal Oxide High-Pressure Phases for Photocatalytic Properties by Severe Plastic Deformation
- (2019) Hadi Razavi-Khosroshahi et al. MATERIALS TRANSACTIONS
- Metallurgical Alchemy by Ultra-Severe Plastic Deformation via High-Pressure Torsion Process
- (2019) Kaveh Edalati MATERIALS TRANSACTIONS
- Comparisons of Microstructures and Mechanical Properties of Heterogeneous Nano-Structure Induced by Heavy Cold Rolling and Ultrafine-Grained Structure by Multi-Directional Forging of Cu–Al Alloy
- (2019) Hiromi Miura et al. MATERIALS TRANSACTIONS
- Strain Induced Segregations in Severely Deformed Materials
- (2019) Xavier Sauvage et al. MATERIALS TRANSACTIONS
- Deformation Heterogeneities in Equal Channel Angular Pressing
- (2019) Werner Skrotzki MATERIALS TRANSACTIONS
- Critical Temperature in Bulk Ultrafine-Grained Superconductors of Nb, V, and Ta Processed by High-Pressure Torsion
- (2019) Terukazu Nishizaki et al. MATERIALS TRANSACTIONS
- Lattice Defects and Their Influence on the Mechanical Properties of Bulk Materials Processed by Severe Plastic Deformation
- (2019) Jenő Gubicza MATERIALS TRANSACTIONS
- Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
- (2019) O. Renk et al. MATERIALS TRANSACTIONS
- Hydrostatic Compression Effects on Fifth-Group Element Superconductors V, Nb, and Ta Subjected to High-Pressure Torsion
- (2019) Masaki Mito et al. MATERIALS TRANSACTIONS
- Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys
- (2019) Nobuhiro Tsuji et al. MATERIALS TRANSACTIONS
- Hydrogen Storage in Mg and Mg-Based Alloys and Composites Processed by Severe Plastic Deformation
- (2019) D.R. Leiva et al. MATERIALS TRANSACTIONS
- Historical Studies by Polish Scientist on Ultrafine-Grained Materials by Severe Plastic Deformation
- (2019) Krzysztof Bryła et al. MATERIALS TRANSACTIONS
- The Effect of Severe Plastic Deformations on Phase Transitions and Structure of Solids
- (2019) Vladimir D. Blank et al. MATERIALS TRANSACTIONS
- Progress in Mechanical Properties of Gradient Structured Metallic Materials Induced by Surface Mechanical Attrition Treatment
- (2019) Xu Yang et al. MATERIALS TRANSACTIONS
- Texture Evolution in Severe Plastic Deformation Processes
- (2019) Satyam Suwas et al. MATERIALS TRANSACTIONS
- The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation
- (2019) Petr Kral et al. MATERIALS TRANSACTIONS
- Phase Transformations Induced by Severe Plastic Deformation
- (2019) Andrey Mazilkin et al. MATERIALS TRANSACTIONS
- Effect of Cold Rolling on Metal Hydrides
- (2019) Jacques Huot et al. MATERIALS TRANSACTIONS
- The Development of Vacancies during Severe Plastic Deformation
- (2019) J. Čížek et al. MATERIALS TRANSACTIONS
- The Efficiency of Twist Extrusion for Compaction of Powder Materials
- (2019) Y. E. Beygelzimer et al. POWDER METALLURGY AND METAL CERAMICS
- Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface
- (2019) Pierre Maurel et al. WEAR
- On the Heterogeneity of Local Shear Strain Induced by High‐Pressure Torsion
- (2019) Wei Jiang et al. ADVANCED ENGINEERING MATERIALS
- Fast Forging: A new SPD method to synthesize Mg-based alloys for hydrogen storage
- (2019) Patricia de Rango et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructural details of hydrogen diffusion and storage in Ti–V–Cr alloys activated through surface and bulk severe plastic deformation
- (2019) Marc Novelli et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Phase transformations, vacancy formation and variations of optical and photocatalytic properties in TiO2-ZnO composites by high-pressure torsion
- (2019) Jacqueline Hidalgo-Jimenez et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Influence of severe plastic deformation on the microstructure and hardness of a CoCrFeNi high-entropy alloy: A comparison with CoCrFeNiMn
- (2019) Jenő Gubicza et al. MATERIALS CHARACTERIZATION
- Radiation Tolerance of Ultrafine-Grained Materials Fabricated by Severe Plastic Deformation
- (2019) Nariman A. Enikeev et al. MATERIALS TRANSACTIONS
- The Effect of Severe Plastic Deformation on Thermoelectric Performance of Skutterudites, Half-Heuslers and Bi-Tellurides
- (2019) Gerda Rogl et al. MATERIALS TRANSACTIONS
- Tensorial stress−strain fields and large elastoplasticity as well as friction in diamond anvil cell up to 400 GPa
- (2019) Valery I. Levitas et al. npj Computational Materials
- Amorphization induced by 60° shuffle dislocation pileup against different grain boundaries in silicon bicrystal under shear
- (2019) Hao Chen et al. ACTA MATERIALIA
- Mechanical Synthesis and Hydrogen Storage Characterization of MgVCr and MgVTiCrFe High‐Entropy Alloy
- (2019) Marcelo Orpinelli de Marco et al. ADVANCED ENGINEERING MATERIALS
- Influence of ultra-fine grain structure on corrosion behaviour of biodegradable Mg-1Ca alloy
- (2019) E.V. Parfenov et al. CORROSION SCIENCE
- Mechanochemistry of Metal Hydrides: Recent Advances
- (2019) Jacques Huot et al. Materials
- Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures
- (2019) Ruixiao Zheng et al. Scientific Reports
- Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg
- (2019) Jae-Kyung Han et al. Scientific Reports
- Half-Heusler alloys: Enhancement of ZT after severe plastic deformation (ultra-low thermal conductivity)
- (2019) Gerda Rogl et al. ACTA MATERIALIA
- The significance of strain weakening and self-annealing in a superplastic Bi–Sn eutectic alloy processed by high-pressure torsion
- (2019) Chuan Ting Wang et al. ACTA MATERIALIA
- Enhanced photocatalytic hydrogen production on GaN–ZnO oxynitride by introduction of strain-induced nitrogen vacancy complexes
- (2019) Kaveh Edalati et al. ACTA MATERIALIA
- Synthesis of Hybrid Nanocrystalline Alloys by Mechanical Bonding through High‐Pressure Torsion
- (2019) Jae-Kyung Han et al. ADVANCED ENGINEERING MATERIALS
- Effect of temperature on fast forging process of Mg-Ni samples for fast formation of Mg2Ni for hydrogen storage
- (2019) Nataliya Skryabina et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Fine-tuning of mechanical properties in V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy through high-pressure torsion and annealing
- (2019) Peyman Asghari-Rad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Imaging stress and magnetism at high pressures using a nanoscale quantum sensor
- (2019) S. Hsieh et al. SCIENCE
- Photocatalytic activity of aluminum oxide by oxygen vacancy generation using high-pressure torsion straining
- (2019) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Reversible room temperature hydrogen storage in high-entropy alloy TiZrCrMnFeNi
- (2019) Parisa Edalati et al. SCRIPTA MATERIALIA
- Materials for hydrogen-based energy storage – past, recent progress and future outlook
- (2019) Michael Hirscher et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31
- (2018) Sara Bagherifard et al. Acta Biomaterialia
- Design and synthesis of a magnesium alloy for room temperature hydrogen storage
- (2018) Kaveh Edalati et al. ACTA MATERIALIA
- Grain boundary engineering parameters for ultrafine grained microstructures: Proof of principles by a systematic composition variation in the Cu-Ni system
- (2018) Friederike Emeis et al. ACTA MATERIALIA
- Mechanical properties and optimal grain size distribution profile of gradient grained nickel
- (2018) Y. Lin et al. ACTA MATERIALIA
- Annealing-Induced Hardening in Ultrafine-Grained Ni-Mo Alloys
- (2018) Jenő Gubicza et al. ADVANCED ENGINEERING MATERIALS
- Review on Recent Advancements in Severe Plastic Deformation of Oxides by High-Pressure Torsion (HPT)
- (2018) Kaveh Edalati ADVANCED ENGINEERING MATERIALS
- Bulk metallic dual phase glasses by severe plastic deformation
- (2018) Lisa Krämer et al. INTERMETALLICS
- Phase field approach for stress- and temperature-induced phase transformations that satisfies lattice instability conditions. Part I. General theory
- (2018) Valery I. Levitas INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of gradient-structure versus uniform nanostructure on hydrogen storage of Ti-V-Cr alloys: Investigation using ultrasonic SMAT and HPT processes
- (2018) Kaveh Edalati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanochemical induced structural changes in sucrose using the rotational diamond anvil cell
- (2018) Jennifer A. Ciezak-Jenkins et al. JOURNAL OF APPLIED PHYSICS
- Effect of high-pressure torsion on the microstructure and thermoelectric properties of Fe2VAl-based compounds
- (2018) S. Masuda et al. JOURNAL OF APPLIED PHYSICS
- Nanoscale mechanisms for high-pressure mechanochemistry: a phase field study
- (2018) Mahdi Javanbakht et al. JOURNAL OF MATERIALS SCIENCE
- Effect of carbon content and annealing on structure and hardness of CrFe2NiMnV0.25 high-entropy alloys processed by high-pressure torsion
- (2018) Hamed Shahmir et al. JOURNAL OF MATERIALS SCIENCE
- Characterization of lattice defects in metallic materials by positron annihilation spectroscopy: A review
- (2018) J. Čížek JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- High pressure phase transformations revisited
- (2018) Valery I Levitas JOURNAL OF PHYSICS-CONDENSED MATTER
- Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment
- (2018) M. Novelli et al. MATERIALS CHARACTERIZATION
- Surface nanocrystallization of 17-4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process
- (2018) Dan Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel
- (2018) I. Miyazaki et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hydrostatic cyclic expansion extrusion (HCEE) as a novel severe plastic deformation process for producing long nanostructured metals
- (2018) F. Samadpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation on microstructure and mechanical properties of Al/Al-Zn-Mg–Cu laminated composite fabricated by accumulative roll bonding (ARB) process
- (2018) S.H. Seyed Ebrahimi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP
- (2018) Irina P. Semenova et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stability of the structure and properties of an ultrafine-grained Cr-Ni steel irradiated with neutrons in nuclear reactor core conditions
- (2018) V.K. Shamardin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Long-time stability of metals after severe plastic deformation: Softening and hardening by self-annealing versus thermal stability
- (2018) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of temperature rise on microstructural evolution during high-pressure torsion
- (2018) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An approach for room-temperature multi-directional forging of pure titanium for strengthening
- (2018) H. Miura et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Coupled strain-induced alpha to omega phase transformation and plastic flow in zirconium under high pressure torsion in a rotational diamond anvil cell
- (2018) Biao Feng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- New Mg–V–Cr BCC Alloys Synthesized by High-Pressure Torsion and Ball Milling
- (2018) Keisuke Fujiwara et al. MATERIALS TRANSACTIONS
- Combination of High-Pressure Torsion with Incremental Feeding for Upsizing Sample
- (2018) Etsuko Shigeno et al. MATERIALS TRANSACTIONS
- Incremental Feeding High-Pressure Sliding for Grain Refinement of Large-Scale Sheets: Application to Inconel 718
- (2018) Yoichi Takizawa et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Structure and Thermal Stability of High-Strength Cu–18Nb Composite Depending on the Degree of Deformation
- (2018) I. L. Deryagina et al. PHYSICS OF METALS AND METALLOGRAPHY
- Diamond anvil cell behavior up to 4 Mbar
- (2018) Bing Li et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Radiation damage in nanostructured materials
- (2018) Xinghang Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Review on superior strength and enhanced ductility of metallic nanomaterials
- (2018) I.A. Ovid'ko et al. PROGRESS IN MATERIALS SCIENCE
- Grain-boundary kinetics: A unified approach
- (2018) Jian Han et al. PROGRESS IN MATERIALS SCIENCE
- High-pressure torsion for new hydrogen storage materials
- (2018) Kaveh Edalati et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Grain growth in nanograined aluminum oxide by high-pressure torsion: Phase transformation and plastic strain effects
- (2018) Ikuro Fujita et al. SCRIPTA MATERIALIA
- Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
- (2018) O. Renk et al. SCRIPTA MATERIALIA
- Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes
- (2018) Y.Z. Tian et al. SCRIPTA MATERIALIA
- Improvement in tribological behavior of commercial pure titanium (CP-Ti) by surface mechanical attrition treatment (SMAT)
- (2018) Saeed Alikhani Chamgordani et al. TRIBOLOGY INTERNATIONAL
- Effects of Passes on Microstructure Evolution and Mechanical Properties of Mg–Gd–Y–Zn–Zr Alloy During Multidirectional Forging
- (2018) Bing Li et al. Acta Metallurgica Sinica-English Letters
- The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel
- (2018) Petr Kral et al. Materials
- Review: Modes and Processes of Severe Plastic Deformation (SPD)
- (2018) Vladimir Segal Materials
- Transition from poor ductility to room-temperature superplasticity in a nanostructured aluminum alloy
- (2018) Kaveh Edalati et al. Scientific Reports
- Transition of Dislocation Structures in Severe Plastic Deformation and Its Effect on Dissolution in Dislocation Etchant
- (2018) Muhammad Rifai et al. Advances in Materials Science and Engineering
- Enhanced Corrosion Resistance of Ultrafine-Grained Fe-Cr Alloys with Subcritical Cr Contents for Passivity
- (2018) Muhammad Rifai et al. Metals
- Pressure-Induced Transformation of Graphite and Diamond to Onions
- (2018) Vladimir Blank et al. Crystals
- Development of high-performance energy absorption component based on the structural design and nanocrystallization
- (2018) Tao Tang et al. MATERIALS & DESIGN
- Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening
- (2018) Tadahiko Furuta et al. MATERIALS & DESIGN
- Direct SPD-processing to achieve high-ZT skutterudites
- (2018) G. Rogl et al. ACTA MATERIALIA
- Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion
- (2018) Yidong Zhang et al. ACTA MATERIALIA
- Crystal and electronic structural changes during annealing in severely deformed Si containing metastable phases formed by high-pressure torsion
- (2018) Yoshifumi Ikoma et al. APPLIED PHYSICS LETTERS
- Structural evolutions of metallic materials processed by severe plastic deformation
- (2018) Yang Cao et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Impact of metastable phases on electrical properties of Si with different doping concentrations after processing by high-pressure torsion
- (2018) Bumsoo Chon et al. SCRIPTA MATERIALIA
- Bulk nanocrystalline gamma magnesium hydride with low dehydrogenation temperature stabilized by plastic straining via high-pressure torsion
- (2018) Kaveh Edalati et al. SCRIPTA MATERIALIA
- An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications
- (2018) E. Bagherpour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The influence of stacking fault energy on mechanical properties of Cu-Al-Zn alloys processed by surface mechanical attrition treatment
- (2018) Lifang Meng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of stacking fault energy on microstructural feature and back stress hardening in Cu-Al alloys subjected to surface mechanical attrition treatment
- (2018) Yueling Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks
- (2018) A. Hohenwarter et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties
- (2018) Nataliya Skryabina et al. MOLECULES
- Scale-Free Modeling of Coupled Evolution of Discrete Dislocation Bands and Multivariant Martensitic Microstructure
- (2018) Valery I. Levitas et al. PHYSICAL REVIEW LETTERS
- Lattice Instability during Solid-Solid Structural Transformations under a General Applied Stress Tensor: Example of Si I→Si II with Metallization
- (2018) Nikolai A. Zarkevich et al. PHYSICAL REVIEW LETTERS
- High-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy
- (2018) A. Kilmametov et al. SCRIPTA MATERIALIA
- Surface functionalization via PEO coating and RGD peptide for nanostructured titanium implants and their in vitro assessment
- (2018) Evgeny V. Parfenov et al. SURFACE & COATINGS TECHNOLOGY
- Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag
- (2018) Michael Wurmshuber et al. MATERIALS & DESIGN
- Low-temperature anatase-to-rutile phase transformation and unusual grain coarsening in titanium oxide nanopowders by high-pressure torsion straining
- (2018) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Microstructure and phase transformations of silica glass and vanadium oxide by severe plastic deformation via high-pressure torsion straining
- (2018) Kaveh Edalati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- FEM modeling of plastic flow and strain-induced phase transformation in BN under high pressure and large shear in a rotational diamond anvil cell
- (2018) Biao Feng et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Slip of shuffle screw dislocations through tilt grain boundaries in silicon
- (2018) Hao Chen et al. COMPUTATIONAL MATERIALS SCIENCE
- Optical Properties of Nanocrystalline Monoclinic Y2O3 Stabilized by Grain Size and Plastic Strain Effects via High-Pressure Torsion
- (2017) Hadi Razavi-Khosroshahi et al. INORGANIC CHEMISTRY
- Severe plastic deformation driven nanostructure and phase evolution in a Al 0.5 CoCrFeMnNi dual phase high entropy alloy
- (2017) T.S. Reddy et al. INTERMETALLICS
- Effect of surface mechanical attrition treatment on low cycle fatigue properties of an austenitic stainless steel
- (2017) J. Zhou et al. INTERNATIONAL JOURNAL OF FATIGUE
- Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminium alloy
- (2017) Vaibhav Pandey et al. INTERNATIONAL JOURNAL OF FATIGUE
- Processing of MgH2 by extensive cold rolling under protective atmosphere
- (2017) Jose J. Márquez et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Controlling Surface Chemistry to Deconvolute Corrosion Benefits Derived from SMAT Processing
- (2017) Heather A. Murdoch et al. JOM
- Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion
- (2017) Anita Heczel et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanisms of precipitation induced by large strains in the Al-Cu system
- (2017) Y. Nasedkina et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Phase transitions in Cu-based alloys under high pressure torsion
- (2017) B.B. Straumal et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A new designed incremental high pressure torsion process for producing long nanostructured rod samples
- (2017) Mehdi Eskandarzade et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hydrogen embrittlement behaviors of ultrafine-grained 22Mn–0.6C austenitic twinning induced plasticity steel
- (2017) Yu Bai et al. JOURNAL OF MATERIALS RESEARCH
- Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion
- (2017) Marlene Walpurga Kapp et al. JOURNAL OF MATERIALS RESEARCH
- Gradient Structured Copper by Rotationally Accelerated Shot Peening
- (2017) X. Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of self-ion irradiation on the microstructural changes of alloy EK-181 in annealed and severely deformed conditions
- (2017) E. Aydogan et al. JOURNAL OF NUCLEAR MATERIALS
- High-resolution transmission electron microscopy analysis of nanograined germanium produced by high-pressure torsion
- (2017) Yoshifumi Ikoma et al. MATERIALS CHARACTERIZATION
- High-resolution transmission electron microscopy analysis of bulk nanograined silicon processed by high-pressure torsion
- (2017) Yuta Fukushima et al. MATERIALS CHARACTERIZATION
- High-pressure torsion of aluminum with ultrahigh purity (99.9999%) and occurrence of inverse Hall-Petch relationship
- (2017) Yuki Ito et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultra-severe plastic deformation: Evolution of microstructure, phase transformation and hardness in immiscible magnesium-based systems
- (2017) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- FEM simulation of large deformation of copper in the quasi-constrain high-pressure-torsion setup
- (2017) Mehdi Kamrani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing
- (2017) Hamed Shahmir et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical alloying via high-pressure torsion of the immiscible Cu 50 Ta 50 system
- (2017) Nazar Ibrahim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of Submicrocrystalline Structure Formation Conditions in Iron-Nickel Alloys with Helical Extrusion
- (2017) D. V. Pavlenko et al. METAL SCIENCE AND HEAT TREATMENT
- Triaxial-Stress-Induced Homogeneous Hysteresis-Free First-Order Phase Transformations with Stable Intermediate Phases
- (2017) Valery I. Levitas et al. PHYSICAL REVIEW LETTERS
- High-pressure rotational deformation apparatus to 135 GPa
- (2017) Ryuichi Nomura et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing
- (2017) Shuhei Yoshida et al. SCRIPTA MATERIALIA
- Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures
- (2017) Ruixiao Zheng et al. SCRIPTA MATERIALIA
- Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures
- (2017) O. Renk et al. SCRIPTA MATERIALIA
- Role and effect of mechanical polishing on the enhancement of the duplex mechanical attrition/plasma nitriding treatment of AISI 316L steel
- (2017) M. Chemkhi et al. SURFACE & COATINGS TECHNOLOGY
- The effect of surface contamination on corrosion performance of ultrasonic shot peened 7150 Al alloy
- (2017) Qingqing Sun et al. SURFACE & COATINGS TECHNOLOGY
- Plastic deformation mechanisms in a severely deformed Fe-Ni-Al-C alloy with superior tensile properties
- (2017) Yan Ma et al. Scientific Reports
- High-pressure zinc oxide phase as visible-light-active photocatalyst with narrow band gap
- (2017) Hadi Razavi-Khosroshahi et al. Journal of Materials Chemistry A
- Progress and Trends in Magnesium-Based Materials for Energy-Storage Research: A Review
- (2017) Huaiyu Shao et al. Energy Technology
- Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy
- (2017) Kaveh Edalati et al. Scientific Reports
- From powders to bulk metallic glass composites
- (2017) Lisa Krämer et al. Scientific Reports
- New nanostructured phases with reversible hydrogen storage capability in immiscible magnesium–zirconium system produced by high-pressure torsion
- (2016) Kaveh Edalati et al. ACTA MATERIALIA
- On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu Co alloy system during high-pressure torsion deformation
- (2016) A. Bachmaier et al. ACTA MATERIALIA
- Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
- (2016) X.L. Wu et al. ACTA MATERIALIA
- Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
- (2016) Karoline Sophie Kormout et al. ADVANCED ENGINEERING MATERIALS
- On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature
- (2016) M. Novelli et al. APPLIED SURFACE SCIENCE
- High thermoelectric performance of Bi-Te alloy: Defect engineering strategy
- (2016) Jong Gil Park et al. CURRENT APPLIED PHYSICS
- A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process
- (2016) M. Azabou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion
- (2016) Kaveh Edalati et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrogen storage in heavily deformed ZK60 alloy modified with 2.5 wt.% Mm addition
- (2016) Juliano Soyama et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Production of nanostructure copper by planar twist channel angular extrusion process
- (2016) M. Shamsborhan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical behavior and deformation kinetics of gradient structured Cu-Al alloys with varying stacking fault energy
- (2016) Zhe Yin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural Inhomogeneity in Constrained Groove Pressed Cu-Zn Alloy Sheet
- (2016) Prabhat Chand Yadav et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of equal channel angular pressing on the thermal-annealing-induced microstructure and texture evolution of cold-rolled copper
- (2016) Z.N. Mao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure quantification of ultrafine grained pure copper fabricated by simple shear extrusion (SSE) technique
- (2016) E. Bagherpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Principle of one-step synthesis for multilayered structures using tube high-pressure shearing
- (2016) Zheng Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of AZ31 magnesium alloy processed by multi-directional forging at different temperatures
- (2016) Hao Huang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High Pressure Torsion Extrusion as a new severe plastic deformation process
- (2016) Yu. Ivanisenko et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A review on high-pressure torsion (HPT) from 1935 to 1988
- (2016) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution of pure copper during a single pass of simple shear extrusion (SSE): role of shear reversal
- (2016) E. Bagherpour et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
- (2016) Hamed Shahmir et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes
- (2016) G. Faraji et al. MATERIALS SCIENCE AND TECHNOLOGY
- Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations
- (2016) Kaveh Edalati et al. MATERIALS TRANSACTIONS
- Corrosion of Ultrafine Grained Materials by Severe Plastic Deformation, an Overview
- (2016) Hiroyuki Miyamoto MATERIALS TRANSACTIONS
- Effect of Multi-pass Friction Stir Processing on the Electrochemical and Corrosion Behavior of Pure Titanium in Strongly Acidic Solutions
- (2016) Arash Fattah-Alhosseini et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
- (2016) Zhiming Li et al. NATURE
- Phase transformation of germanium by processing through high-pressure torsion: strain and temperature effects
- (2016) Yoshifumi Ikoma et al. PHILOSOPHICAL MAGAZINE LETTERS
- Impact of severe plastic deformation on microstructure and hydrogen storage of titanium-iron-manganese intermetallics
- (2016) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Plastic strain and grain size effect on high-pressure phase transformations in nanostructured TiO 2 ceramics
- (2016) Hadi Razavi-Khosroshahi et al. SCRIPTA MATERIALIA
- Role of surface mechanical attrition treatment and chemical etching on plasma nitriding behavior of AISI 304L steel
- (2016) Atul M. Gatey et al. SURFACE & COATINGS TECHNOLOGY
- Effect of processing route on grain refinement in pure copper processed by equal channel angular extrusion
- (2016) Chao-lan TANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Visible-Light-Driven Photocatalytic Hydrogen Generation on Nanosized TiO2-II Stabilized by High-Pressure Torsion
- (2016) Hadi Razavi-Khosroshahi et al. ACS Catalysis
- Plastically deformed Cu-based alloys as high-performance catalysts for the reduction of 4-nitrophenol
- (2016) Eredzhep Menumerov et al. Catalysis Science & Technology
- Large enhancement of superconducting transition temperature in single-element superconducting rhenium by shear strain
- (2016) Masaki Mito et al. Scientific Reports
- The importance of fracture toughness in ultrafine and nanocrystalline bulk materials
- (2016) R. Pippan et al. Materials Research Letters
- Variations in through-thickness recrystallization and grain growth textures in the Al layers in ARB-processed Al/Al(0.3% Sc) composite sheets
- (2016) M.Z. Quadir et al. MATERIALS & DESIGN
- Scaling up Segal's principle of Equal-Channel Angular Pressing
- (2016) Stephanie Frint et al. MATERIALS & DESIGN
- The effect of grain size on the annealing-induced phase transformation in an Al 0·3 CoCrFeNi high entropy alloy
- (2016) Qunhua Tang et al. MATERIALS & DESIGN
- Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires
- (2016) A. Hohenwarter et al. Scientific Reports
- New bulk p-type skutterudites DD 0.7 Fe 2.7 Co 1.3 Sb 12− x X x (X = Ge, Sn) reaching ZT > 1.3
- (2015) G. Rogl et al. ACTA MATERIALIA
- Significance of grain boundaries and stacking faults on hydrogen storage properties of Mg 2 Ni intermetallics processed by high-pressure torsion
- (2015) Toshifumi Hongo et al. ACTA MATERIALIA
- Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultra-fine-grained nickel severely deformed by equal-channel angular pressing
- (2015) Sergiy V. Divinski et al. ACTA MATERIALIA
- Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al–Mg–Si alloys
- (2015) X. Sauvage et al. ACTA MATERIALIA
- Formation of metastable phases in magnesium–titanium system by high-pressure torsion and their hydrogen storage performance
- (2015) Kaveh Edalati et al. ACTA MATERIALIA
- Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
- (2015) H.W. Huang et al. ACTA MATERIALIA
- Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
- (2015) B. Schuh et al. ACTA MATERIALIA
- Ultrafine Grained Structures Resulting from SPD-Induced Phase Transformation in Al-Zn Alloys
- (2015) Xavier Sauvage et al. ADVANCED ENGINEERING MATERIALS
- Recent Advances in Processing and Application of Nanostructured Titanium for Dental Implants
- (2015) Alexander V. Polyakov et al. ADVANCED ENGINEERING MATERIALS
- Multi-Axial Incremental Forging and Shearing as a New Severe Plastic Deformation Processing Technique
- (2015) M. Montazeri-Pour et al. ADVANCED ENGINEERING MATERIALS
- Synthesis of Hybrid Materials by Severe Plastic Deformation: A New Paradigm of SPD Processing
- (2015) Yan Beygelzimer et al. ADVANCED ENGINEERING MATERIALS
- Development of Surface Nano-Crystallization in Alloys by Surface Mechanical Attrition Treatment (SMAT)
- (2015) Jalal Azadmanjiri et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy
- (2015) A.A.C. Asselli et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy
- (2015) Naresh Nadammal et al. JOM
- Effect of accumulative roll bonding process on the electrochemical behavior of pure copper
- (2015) A. Fattah-alhosseini et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Achieving room temperature superplasticity in Zn–5Al alloy at high strain rates by equal-channel angular extrusion
- (2015) M. Demirtas et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of equal-channel, multiple-angular extrusion on the physical and mechanical properties of glassy polymers
- (2015) Victor A. Beloshenko et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Ultrahigh Strength Copper Obtained by Surface Mechanical Attrition Treatment at Cryogenic Temperature
- (2015) Yu Shen et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The role of temperature in the strengthening of Cu–Al alloys processed by surface mechanical attrition treatment
- (2015) Lele Sun et al. JOURNAL OF MATERIALS RESEARCH
- Allotropic phase transformation and photoluminescence of germanium nanograins processed by high-pressure torsion
- (2015) Yoshifumi Ikoma et al. JOURNAL OF MATERIALS SCIENCE
- Review: achieving superplastic properties in ultrafine-grained materials at high temperatures
- (2015) Megumi Kawasaki et al. JOURNAL OF MATERIALS SCIENCE
- New automated shear cell with diamond anvils for in situ studies of materials using X-ray diffraction
- (2015) N. B. Novikov et al. Journal of Superhard Materials
- Archeometallurgy related to swords
- (2015) Jeffrey Wadsworth MATERIALS CHARACTERIZATION
- High strength and good electrical conductivity in Cu–Cr alloys processed by severe plastic deformation
- (2015) S.V. Dobatkin et al. MATERIALS LETTERS
- Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing
- (2015) Q.H. Tang et al. MATERIALS LETTERS
- Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling
- (2015) Jingmei Tao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of gradient structure volume fraction on the mechanical properties of pure copper
- (2015) Xincheng Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced mechanical properties in Cu–Zn alloys with a gradient structure by surface mechanical attrition treatment at cryogenic temperature
- (2015) Baozhuang Cai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The low temperature fracture behaviour of hydrostatically extruded ultra-fine grained Armco iron
- (2015) M. Gizynski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of high strain rate and room temperature superplasticity in Zn–22Al alloy by two-step equal-channel angular pressing
- (2015) M. Demirtas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn–0.3Al alloy
- (2015) M. Demirtas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature
- (2015) Byungmin Ahn et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper
- (2015) A. Hohenwarter MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Off-axis twist extrusion for uniform processing of round bars
- (2015) Yan Beygelzimer et al. METALS AND MATERIALS INTERNATIONAL
- Electron Backscatter Diffraction and Transmission Kikuchi Diffraction Analysis of an Austenitic Stainless Steel Subjected to Surface Mechanical Attrition Treatment and Plasma Nitriding
- (2015) Gwénaëlle Proust et al. MICROSCOPY AND MICROANALYSIS
- Effect of neutron irradiation on the microstructure and the mechanical and corrosion properties of the ultrafine-grained stainless Cr–Ni steel
- (2015) O. P. Maksimkin et al. PHYSICS OF METALS AND METALLOGRAPHY
- Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
- (2015) S. I. Kim et al. SCIENCE
- Die-hard plastic deformation behavior in an ultrahigh-strength Fe–Ni–Al–C alloy
- (2015) T. Furuta et al. SCRIPTA MATERIALIA
- Surface mechanical attrition treated AISI 304L steel: role of process parameters
- (2015) A. M. Gatey et al. SURFACE ENGINEERING
- Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes
- (2015) Y. Z. Tian et al. Scientific Reports
- Superior radiation-resistant nanoengineered austenitic 304L stainless steel for applications in extreme radiation environments
- (2015) C. Sun et al. Scientific Reports
- Mechanical Behavior of Ultrafine Gradient Grain Structures Produced via Ambient and Cryogenic Surface Mechanical Attrition Treatment in Iron
- (2015) Heather Murdoch et al. Metals
- High Strength and High Uniform Ductility in a Severely Deformed Iron Alloy by Lattice Softening and Multimodal-structure Formation
- (2015) Kaveh Edalati et al. Materials Research Letters
- Plastic Deformation of BaTiO3Ceramics by High-pressure Torsion and Changes in Phase Transformations, Optical and Dielectric Properties
- (2015) Kaveh Edalati et al. Materials Research Letters
- High strength and superconductivity in nanostructured niobium–titanium alloy by high-pressure torsion and annealing: Significance of elemental decomposition and supersaturation
- (2014) Kaveh Edalati et al. ACTA MATERIALIA
- Response of equal channel angular extrusion processed ultrafine-grained T91 steel subjected to high temperature heavy ion irradiation
- (2014) M. Song et al. ACTA MATERIALIA
- High-pressure torsion of titanium at cryogenic and room temperatures: Grain size effect on allotropic phase transformations
- (2014) Kaveh Edalati et al. ACTA MATERIALIA
- Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper
- (2014) O. Renk et al. ACTA MATERIALIA
- Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al–Mg alloy
- (2014) X. Sauvage et al. ACTA MATERIALIA
- Grain Boundary Phenomena in an Ultrafine-Grained Al-Zn Alloy with Improved Mechanical Behavior for Micro-Devices
- (2014) Nguyen Q. Chinh et al. ADVANCED ENGINEERING MATERIALS
- Synthesis of ultrahard fullerite with a catalytic 3D polymerization reaction of C60
- (2014) M. Popov et al. CARBON
- Comparison of corrosion behaviour of nanocrystalline 2024-T4 Al alloy processed by surface mechanical attrition treatment with two different mediums
- (2014) L. Wen et al. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
- Annealing effects on the corrosion resistance of ultrafine-grained pure titanium
- (2014) H.S. Kim et al. CORROSION SCIENCE
- Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: Similarities and differences
- (2014) Kaveh Edalati et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Cold rolling under inert atmosphere: A powerful tool for Mg activation
- (2014) R. Floriano et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Simulation of shot dynamics for ultrasonic shot peening: Effects of process parameters
- (2014) Jawad Badreddine et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Equal-Channel Angular Extrusion of a Low-Density High-Entropy Alloy Produced by High-Energy Cryogenic Mechanical Alloying
- (2014) Vincent H. Hammond et al. JOM
- Fabrication of nanograined silicon by high-pressure torsion
- (2014) Yoshifumi Ikoma et al. JOURNAL OF MATERIALS SCIENCE
- The corrosion behaviour of commercial purity titanium processed by high-pressure torsion
- (2014) Mengyan Nie et al. JOURNAL OF MATERIALS SCIENCE
- The Stability, Electronic Structure, and Optical Property of TiO2 Polymorphs
- (2014) Tong Zhu et al. Journal of Physical Chemistry C
- Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel
- (2014) M.M. Abramova et al. MATERIALS LETTERS
- Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel
- (2014) Ahmad Alsabbagh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of new routes of severe plastic deformation through cyclic expansion–extrusion process
- (2014) N. Pardis et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of pure metals: Investigation using high-pressure torsion
- (2014) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of secondary warm rolling on the interface microstructure and mechanical properties of a roll-bonded three-ply Al/Mg/Al sheet
- (2014) K.S. Lee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of FeNi withL10-ordered structure using high-pressure torsion
- (2014) Seungwon Lee et al. PHILOSOPHICAL MAGAZINE LETTERS
- Extraordinary strain hardening by gradient structure
- (2014) X. Wu et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Lower-temperature aluminizing behaviors of a ferritic–martensitic steel processed by means of surface mechanical attrition treatment
- (2014) S. Guo et al. SURFACE & COATINGS TECHNOLOGY
- Thermal conductivity reduction of crystalline silicon by high-pressure torsion
- (2014) Sivasankaran Harish et al. Nanoscale Research Letters
- Observation of a New Mechanism Balancing Hardening and Softening in Metals
- (2014) Tianbo Yu et al. Materials Research Letters
- Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms
- (2013) A. Hohenwarter et al. ACTA MATERIALIA
- High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum–copper system
- (2013) Keiichiro Oh-ishi et al. ACTA MATERIALIA
- Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
- (2013) Terence G. Langdon ACTA MATERIALIA
- Materials challenges in nuclear energy
- (2013) S.J. Zinkle et al. ACTA MATERIALIA
- Extreme grain refinement by severe plastic deformation: A wealth of challenging science
- (2013) Y. Estrin et al. ACTA MATERIALIA
- n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R=Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈2.0
- (2013) G. Rogl et al. ACTA MATERIALIA
- Design of Radiation Tolerant Materials Via Interface Engineering
- (2013) Weizhong Han et al. ADVANCED MATERIALS
- Graphite to diamond-like carbon phase transformation by high-pressure torsion
- (2013) Kaveh Edalati et al. APPLIED PHYSICS LETTERS
- Phase field approach to interaction of phase transformation and dislocation evolution
- (2013) Valery I. Levitas et al. APPLIED PHYSICS LETTERS
- High-pressure torsion of pure cobalt: hcp-fcc phase transformations and twinning during severe plastic deformation
- (2013) Kaveh Edalati et al. APPLIED PHYSICS LETTERS
- Mechanism of activation of TiFe intermetallics for hydrogen storage by severe plastic deformation using high-pressure torsion
- (2013) Kaveh Edalati et al. APPLIED PHYSICS LETTERS
- Phase transitions in metallic alloys driven by the high pressure torsion
- (2013) B. Straumal et al. Archives of Civil and Mechanical Engineering
- Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel
- (2013) T. Balusamy et al. CORROSION SCIENCE
- Mechanical properties of aluminium laminates produced by accumulative roll bonding
- (2013) P. Chekhonin et al. CRYSTAL RESEARCH AND TECHNOLOGY
- Effect of severe shot peening on microstructure and fatigue strength of cast iron
- (2013) S. Bagherifard et al. INTERNATIONAL JOURNAL OF FATIGUE
- An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing
- (2013) Alberto Moreira Jorge et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- High-pressure torsion of TiFe intermetallics for activation of hydrogen storage at room temperature with heterogeneous nanostructure
- (2013) Kaveh Edalati et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Atomic Mixing in Metals Under Shear Deformation
- (2013) Nhon Q. Vo et al. JOM
- Evolution of lattice defects, disordered/ordered phase transformations and mechanical properties in Ni–Al–Ti intermetallics by high-pressure torsion
- (2013) Kaveh Edalati et al. JOURNAL OF ALLOYS AND COMPOUNDS
- H-sorption properties and structural evolution of Mg processed by severe plastic deformation
- (2013) W.J. Botta et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Hydrogen storage properties of pure Mg after the combined processes of ECAP and cold-rolling
- (2013) G.F. Lima et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High-Pressure Torsion to Improve Thermoelectric Efficiency of Clathrates?
- (2013) X. Yan et al. JOURNAL OF ELECTRONIC MATERIALS
- Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation
- (2013) Irene J. Beyerlein et al. JOURNAL OF MATERIALS RESEARCH
- Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion
- (2013) Megumi Kawasaki JOURNAL OF MATERIALS SCIENCE
- In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT)
- (2013) Y. Samih et al. MATERIALS CHARACTERIZATION
- Phase transitions during high pressure torsion of CuCo alloys
- (2013) B.B. Straumal et al. MATERIALS LETTERS
- Nanostructured severe plastic deformation processed titanium for orthodontic mini-implants
- (2013) Glaucio Serra et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical properties of a medical β-type titanium alloy with specific microstructural evolution through high-pressure torsion
- (2013) H. Yilmazer et al. Materials Science & Engineering C-Materials for Biological Applications
- Shear bands in metallic glasses
- (2013) A.L. Greer et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad sheets
- (2013) A. Macwan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling the temperature rise in high-pressure torsion
- (2013) Pedro Henrique R. Pereira et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding (ARB)
- (2013) L. Ghalandari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface characteristics and fatigue performance of warm shot peened wrought magnesium alloy Mg–9Gd–2Y
- (2013) Y. Huang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Radiation damage tolerant nanomaterials
- (2013) I.J. Beyerlein et al. Materials Today
- Development of Multilayer Steels for Improved Combinations of High Strength and High Ductility
- (2013) Toshihiko Koseki et al. MATERIALS TRANSACTIONS
- Cross Flow During Twist Extrusion: Theory, Experiment, and Application
- (2013) Roman Kulagin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Phase transformations in nanograin materials under high pressure and plastic shear: nanoscale mechanisms
- (2013) Valery I. Levitas et al. Nanoscale
- Evidence of grain boundary dislocation step motion associated to shear-coupled grain boundary migration
- (2013) A. Rajabzadeh et al. PHILOSOPHICAL MAGAZINE
- Nanograin formation of GaAs by high-pressure torsion
- (2013) Yoshifumi Ikoma et al. PHILOSOPHICAL MAGAZINE LETTERS
- Superconducting properties in bulk nanostructured niobium prepared by high-pressure torsion
- (2013) Terukazu Nishizaki et al. PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS
- Elementary Mechanisms of Shear-Coupled Grain Boundary Migration
- (2013) A. Rajabzadeh et al. PHYSICAL REVIEW LETTERS
- Control of the mechanical and thermal properties of semicrystalline polymers via a new processing route of the equal channel multiple angular extrusion
- (2013) V.A. Beloshenko et al. POLYMER ENGINEERING AND SCIENCE
- Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel
- (2013) Rajib Saha et al. SCRIPTA MATERIALIA
- Enhancing grain refinement in polycrystalline materials using surface mechanical attrition treatment at cryogenic temperatures
- (2013) K.A. Darling et al. SCRIPTA MATERIALIA
- A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
- (2013) R.Z. Valiev et al. SCRIPTA MATERIALIA
- Influence of Surface Mechanical Attrition Treatment Duration on Fatigue Lives of Ti–6Al–4V
- (2013) S. Anand Kumar et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Ultrastrong Mg Alloy via Nano-spaced Stacking Faults
- (2013) W. W. Jian et al. Materials Research Letters
- Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion
- (2012) Roberto B. Figueiredo et al. ACTA MATERIALIA
- Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates
- (2012) Paul Chekhonin et al. ACTA MATERIALIA
- High-pressure torsion, a new processing route for thermoelectrics of high ZTs by means of severe plastic deformation
- (2012) Gerda Rogl et al. ACTA MATERIALIA
- Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting
- (2012) M. Arzaghi et al. ACTA MATERIALIA
- Hardening of pure metals by high-pressure torsion: A physically based model employing volume-averaged defect evolutions
- (2012) Marco J. Starink et al. ACTA MATERIALIA
- High strength and ductile ultrafine-grained Cu–Ag alloy through bimodal grain size, dislocation density and solute distribution
- (2012) K. Sitarama Raju et al. ACTA MATERIALIA
- Architecturing of Metal-Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design
- (2012) Olivier Bouaziz et al. ADVANCED ENGINEERING MATERIALS
- Grain Boundary Segregation in UFG Alloys Processed by Severe Plastic Deformation
- (2012) Xavier Sauvage et al. ADVANCED ENGINEERING MATERIALS
- Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion
- (2012) Yoshifumi Ikoma et al. APPLIED PHYSICS LETTERS
- Influence of Surface Mechanical Attrition Treatment Attrition Media on the Surface Contamination and Corrosion of Magnesium
- (2012) D. Fabijanic et al. CORROSION
- Bulk Nanostructured Metals for Innovative Applications
- (2012) Ruslan Z. Valiev et al. JOM
- Coupled plastic flow and phase transformation under compression of materials in a diamond anvil cell: Effects of transformation kinetics and yield strength
- (2012) Oleg M. Zarechnyy et al. JOURNAL OF APPLIED PHYSICS
- High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing
- (2012) Zoltán Hegedűs et al. JOURNAL OF MATERIALS SCIENCE
- Three-dimensional analysis of plastic flow during high-pressure torsion
- (2012) Roberto B. Figueiredo et al. JOURNAL OF MATERIALS SCIENCE
- Locating Malleable Bulk Metallic Glasses in Zr–Ti–Cu–Al Alloys with Calorimetric Glass Transition Temperature as an Indicator
- (2012) Qiang He et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A novel severe plastic deformation method for fabricating ultrafine grained pure copper
- (2012) Chengpeng Wang et al. MATERIALS & DESIGN
- On the minimum grain size obtainable by high-pressure torsion
- (2012) Farghalli A. Mohamed et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature
- (2012) H. Chang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanostructuring Nb by various techniques of severe plastic deformation
- (2012) V.V. Popov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena
- (2012) X. Sauvage et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical behavior of martensitic steel severely deformed by the novel technique of repetitive corrugation and straightening by rolling
- (2012) Arya Mirsepasi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing
- (2012) D.V. Gunderov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding
- (2012) M. Tayyebi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermal and Electrical Transport Properties of Zr-Based Bulk Metallic Glassy Alloys with High Glass-Forming Ability
- (2012) Rie Y. Umetsu et al. MATERIALS TRANSACTIONS
- Mechanisms of tensile improvement in caliber-rolled high-carbon steel
- (2012) Taekyung Lee et al. METALS AND MATERIALS INTERNATIONAL
- High-density amorphous phase of silicon carbide obtained under large plastic shear and high pressure
- (2012) Valery I. Levitas et al. PHYSICAL REVIEW B
- Nanostructurization of Nb by high-pressure torsion in liquid nitrogen and the thermal stability of the structure obtained
- (2012) V. V. Popov et al. PHYSICS OF METALS AND METALLOGRAPHY
- Shear-induced phase transition of nanocrystalline hexagonal boron nitride to wurtzitic structure at room temperature and lower pressure
- (2012) C. Ji et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Stress and strain gradients in high-pressure tube twisting
- (2012) A. Pougis et al. SCRIPTA MATERIALIA
- Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins
- (2012) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Development of ultrahigh strength and high ductility in nanostructured iron alloys with lattice softening and nanotwins
- (2012) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Principles of severe plastic deformation using tube high-pressure shearing
- (2012) Jing Tao Wang et al. SCRIPTA MATERIALIA
- Effect of surface mechanical attrition treatment (SMAT) on boronizing of EN8 steel
- (2012) T. Balusamy et al. SURFACE & COATINGS TECHNOLOGY
- Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: Sample preparation, parameters optimization and analysis
- (2012) Yong-jun CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel
- (2012) Y. Sun TRIBOLOGY INTERNATIONAL
- Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion
- (2012) Chuan Ting Wang et al. WEAR
- Application of Severe Plastic Deformation Techniques to Magnesium for Enhanced Hydrogen Sorption Properties
- (2012) Jacques Huot et al. Metals
- Atomic packing symmetry in the metallic liquid and glass states
- (2011) X.J. Liu et al. ACTA MATERIALIA
- Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing
- (2011) Sergiy V. Divinski et al. ACTA MATERIALIA
- High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness
- (2011) Kaveh Edalati et al. ACTA MATERIALIA
- Evolution of defects in copper deformed by high-pressure torsion
- (2011) J. Čížek et al. ACTA MATERIALIA
- Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel
- (2011) Georg B. Rathmayr et al. ACTA MATERIALIA
- The influence of strain rate on the microstructure transition of 304 stainless steel
- (2011) A.Y. Chen et al. ACTA MATERIALIA
- Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution
- (2011) Y. Cao et al. ACTA MATERIALIA
- The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion
- (2011) A. Bachmaier et al. ACTA MATERIALIA
- Surface Modifications of Magnesium Alloys for Biomedical Applications
- (2011) Jingxin Yang et al. ANNALS OF BIOMEDICAL ENGINEERING
- Nanostructured MgH2 prepared by cold rolling and cold forging
- (2011) D.R. Leiva et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Diffusion of Ag and Co in ultrafine-grained α-Ti deformed by equal channel angular pressing
- (2011) Jochen Fiebig et al. JOURNAL OF APPLIED PHYSICS
- Continuous high-pressure torsion using wires
- (2011) Kaveh Edalati et al. JOURNAL OF MATERIALS SCIENCE
- Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion
- (2011) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion
- (2011) Roberto B. Figueiredo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution in an aluminum solid solution alloy processed by ECAP
- (2011) Cheng Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions
- (2011) A.P. Zhilyaev et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086
- (2011) Shibayan Roy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Significance of temperature increase in processing by high-pressure torsion
- (2011) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process
- (2011) Reza Nasiri Dehsorkhi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Low Rotational Speed on Crystal Orientation of Bi2Te3-Based Thermoelectric Semiconductors Deformed by High-Pressure Torsion
- (2011) Maki Ashida et al. MATERIALS TRANSACTIONS
- Accelerated Diffusion and Phase Transformations in Co–Cu Alloys Driven by the Severe Plastic Deformation
- (2011) Boris B. Straumal et al. MATERIALS TRANSACTIONS
- Optical cell for in situ vibrational spectroscopic measurements at high pressures and shear
- (2011) Jennifer A. Ciezak et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Homogeneity of ultrafine-grained copper deformed by high-pressure torsion characterized by positron annihilation and microhardness
- (2011) J. Čížek et al. SCRIPTA MATERIALIA
- High-pressure torsion of pure magnesium: Evolution of mechanical properties, microstructures and hydrogen storage capacity with equivalent strain
- (2011) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Structurally enhanced anelasticity in Zr-based bulk metallic glasses
- (2011) A. Caron et al. SCRIPTA MATERIALIA
- Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion
- (2011) B. Srinivasarao et al. SCRIPTA MATERIALIA
- Plastic deformation and allotropic phase transformations in zirconia ceramics during high-pressure torsion
- (2011) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Fracture toughness evaluation of ultrafine-grained nickel
- (2011) A. Hohenwarter et al. SCRIPTA MATERIALIA
- In situ production of bulk intermetallic-based nanocomposites and nanostructured intermetallics by high-pressure torsion
- (2011) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Accelerated stem cell attachment to ultrafine grained titanium
- (2010) Yuri Estrin et al. Acta Biomaterialia
- Shear band evolution and hardness change in cold-rolled bulk metallic glasses
- (2010) J.W. Liu et al. ACTA MATERIALIA
- Optimization of the strain rate to achieve exceptional mechanical properties of 304 stainless steel using high speed ultrasonic surface mechanical attrition treatment
- (2010) H.L. Chan et al. ACTA MATERIALIA
- An investigation of hardness homogeneity throughout disks processed by high-pressure torsion
- (2010) Megumi Kawasaki et al. ACTA MATERIALIA
- Enhanced Strength and Ductility of Ultrafine-Grained Ti Processed by Severe Plastic Deformation
- (2010) Irina Semenova et al. ADVANCED ENGINEERING MATERIALS
- Nanoscale Grain Refinement and H-Sorption Properties of MgH2 Processed by High-Pressure Torsion and Other Mechanical Routes
- (2010) Daniel Rodrigo Leiva et al. ADVANCED ENGINEERING MATERIALS
- Plasticity and Grain Boundary Diffusion at Small Grain Sizes
- (2010) Gerhard Wilde et al. ADVANCED ENGINEERING MATERIALS
- New Routes for Fabricating Ultrafine-Grained Microstructures in Bulky Steels without Very-High Strains
- (2010) Nobuhiro Tsuji ADVANCED ENGINEERING MATERIALS
- Saturation of Fragmentation During Severe Plastic Deformation
- (2010) R. Pippan et al. Annual Review of Materials Research
- The influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium
- (2010) Vi K. Truong et al. BIOMATERIALS
- Effect of Hydrostatic Extrusion on the Corrosion Resistance of Type 316 Stainless Steel
- (2010) M. Pisarek et al. CORROSION
- Effect of Grain Size on Corrosion: A Review
- (2010) K. D. Ralston et al. CORROSION
- Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel
- (2010) T. Balusamy et al. CORROSION SCIENCE
- Hydrogen storage properties of as-synthesized and severely deformed magnesium – multiwall carbon nanotubes composite
- (2010) V.M. Skripnyuk et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets
- (2010) Md. Zakaria Quadir et al. International Journal of Materials Research
- Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion
- (2010) Wei Xu et al. International Journal of Materials Research
- High-strength and high-conductive Cu/Ag multilayer produced by ARB
- (2010) L. Ghalandari et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A new approach to the processing of metal hydrides
- (2010) Julien Lang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion
- (2010) Y. Cao et al. JOURNAL OF MATERIALS SCIENCE
- Ultrahigh strength of nanocrystalline iron-based alloys produced by high-pressure torsion
- (2010) Tadahiko Furuta et al. JOURNAL OF MATERIALS SCIENCE
- The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study
- (2010) A. Hohenwarter et al. JOURNAL OF MATERIALS SCIENCE
- Continuous high-pressure torsion
- (2010) Kaveh Edalati et al. JOURNAL OF MATERIALS SCIENCE
- Electrochemical Corrosion Behavior of Nanocrystalline Materials—a Review
- (2010) Li Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of surface mechanical attrition treatment (SMAT) on microhardness, surface roughness and wettability of AISI 316L
- (2010) B. Arifvianto et al. MATERIALS CHEMISTRY AND PHYSICS
- Iron-rich layer introduced by SMAT and its effect on corrosion resistance and wear behavior of 2024 Al alloy
- (2010) Lei Wen et al. MATERIALS CHEMISTRY AND PHYSICS
- In vitro corrosion and cytotoxicity on microcrystalline, nanocrystalline and amorphous NiTi alloy fabricated by high pressure torsion
- (2010) F.L. Nie et al. MATERIALS LETTERS
- Homogeneous corrosion of high pressure torsion treated Mg–Zn–Ca alloy in simulated body fluid
- (2010) J.H. Gao et al. MATERIALS LETTERS
- Plastic anisotropy of ultrafine grained aluminium alloys produced by accumulative roll bonding
- (2010) B. Beausir et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB)
- (2010) K. Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermal stability of nanocrystalline structure in niobium processed by high pressure torsion at cryogenic temperatures
- (2010) V.V. Popov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure; bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling
- (2010) X.P. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Hydrogen on Tensile Properties of Ultrafine-Grained Type 310S Austenitic Stainless Steel Processed by High-Pressure Torsion
- (2010) Yoji Mine et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Achieving Exceptional Grain Refinement through Severe Plastic Deformation: New Approaches for Improving the Processing Technology
- (2010) Ruslan Z. Valiev et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Tribocorrosion behaviour of nanostructured titanium substrates processed by high-pressure torsion
- (2010) S Faghihi et al. NANOTECHNOLOGY
- Attenuation of ultrasound in severely plastically deformed nickel
- (2010) Victor V. Kozhushko et al. NDT & E INTERNATIONAL
- Modeling and simulation of strain-induced phase transformations under compression and torsion in a rotational diamond anvil cell
- (2010) Valery I. Levitas et al. PHYSICAL REVIEW B
- Modeling and simulation of strain-induced phase transformations under compression in a diamond anvil cell
- (2010) Valery I. Levitas et al. PHYSICAL REVIEW B
- Mechanical properties of bulk metallic glasses
- (2010) Morgana Martin Trexler et al. PROGRESS IN MATERIALS SCIENCE
- Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion
- (2010) Bernd Oberdorfer et al. SCRIPTA MATERIALIA
- Revealing the relationship between grain size and corrosion rate of metals
- (2010) K.D. Ralston et al. SCRIPTA MATERIALIA
- On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation
- (2010) R.Z. Valiev et al. SCRIPTA MATERIALIA
- Application of high-pressure torsion for consolidation of ceramic powders
- (2010) Kaveh Edalati et al. SCRIPTA MATERIALIA
- Effect of strain path on grain refinement in severely plastically deformed copper
- (2010) C.F. Gu et al. SCRIPTA MATERIALIA
- Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing
- (2009) S. Qu et al. ACTA MATERIALIA
- Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography
- (2009) D. Raabe et al. ACTA MATERIALIA
- Structural rejuvenation in a bulk metallic glass induced by severe plastic deformation
- (2009) W. Dmowski et al. ACTA MATERIALIA
- The “Ductilities” in Single Phase Steels from Usual to Nanoscale Microstructures
- (2009) Olivier Bouaziz ADVANCED ENGINEERING MATERIALS
- Lattice softening for producing ultrahigh strength of iron base nanocrystalline alloy
- (2009) S. Kuramoto et al. APPLIED PHYSICS LETTERS
- Dislocation evolution in titanium during surface severe plastic deformation
- (2009) Ming Wen et al. APPLIED SURFACE SCIENCE
- New methods of solid-phase modification of polymers by simple-shear deformation
- (2009) V. A. Beloshenko et al. DOKLADY PHYSICAL CHEMISTRY
- Fabrication of CuZr(Al) bulk metallic glasses by high pressure torsion
- (2009) Y.F. Sun et al. INTERMETALLICS
- High cycle fatigue behaviour of copper deformed by high pressure torsion
- (2009) G. Khatibi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A visualization of shear strain in processing by high-pressure torsion
- (2009) Y. Cao et al. JOURNAL OF MATERIALS SCIENCE
- Seventy-five years of superplasticity: historic developments and new opportunities
- (2009) Terence G. Langdon JOURNAL OF MATERIALS SCIENCE
- Experimental atomic scale investigation of irradiation effects in CW 316SS and UFG-CW 316SS
- (2009) P. Pareige et al. JOURNAL OF NUCLEAR MATERIALS
- Allotropic phase transformation of pure zirconium by high-pressure torsion
- (2009) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded Cu–Nb composite
- (2009) S.C.V. Lim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution in high purity aluminum processed by ECAP
- (2009) Megumi Kawasaki et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced thermal stability and hardness of Zr46Cu39.2Ag7.8Al7 bulk metallic glass with Fe addition
- (2009) Yuanli Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-pressure torsion of hafnium
- (2009) Kaveh Edalati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic fracture behavior of ultrafine-grained iron
- (2009) A. Hohenwarter et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of High-Pressure Sliding Process for Microstructural Refinement of Rectangular Metallic Sheets
- (2009) Tadayoshi Fujioka et al. MATERIALS TRANSACTIONS
- Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion
- (2009) Ayan Bhowmik et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of severe plastic deformation on the coercivity of Co–Cu alloys
- (2009) B.B. Straumal et al. PHILOSOPHICAL MAGAZINE LETTERS
- Texture evolution in equal-channel angular extrusion
- (2009) Irene J. Beyerlein et al. PROGRESS IN MATERIALS SCIENCE
- Revealing the Maximum Strength in Nanotwinned Copper
- (2009) L. Lu et al. SCIENCE
- Formation Mechanisms of Ultrafine Grained Structures in Severe Plastic Deformation of Metallic Materials
- (2009) Nobuhiro Tsuji TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
- The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion
- (2008) Cheng Xu et al. ACTA MATERIALIA
- Zr–Ti-based Be-bearing glasses optimized for high thermal stability and thermoplastic formability
- (2008) Aaron Wiest et al. ACTA MATERIALIA
- Zr–(Cu,Ag)–Al bulk metallic glasses
- (2008) Q.K. Jiang et al. ACTA MATERIALIA
- Record Superplastic Ductility in a Magnesium Alloy Processed by Equal-Channel Angular Pressing
- (2008) R. B. Figueiredo et al. ADVANCED ENGINEERING MATERIALS
- Nanostructured Titanium for Biomedical Applications
- (2008) R. Z. Valiev et al. ADVANCED ENGINEERING MATERIALS
- Recent Developments in Irradiation-Resistant Steels
- (2008) G.R. Odette et al. Annual Review of Materials Research
- Structural anisotropy in a Zr[sub 57]Ti[sub 5]Cu[sub 20]Al[sub 10]Ni[sub 8] bulk metallic glass deformed by high pressure torsion at room temperature
- (2008) Ádám Révész et al. APPLIED PHYSICS LETTERS
- Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process
- (2008) M EIZADJOU et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Corrosion of ultra-fine grained copper fabricated by equal-channel angular pressing
- (2008) Hiroyuki Miyamoto et al. CORROSION SCIENCE
- Evidence of α → ω phase transition in titanium after high pressure torsion
- (2008) Yulia Ivanisenko et al. International Journal of Materials Research
- Achieving high strain rate superplasticity via severe plastic deformation processing
- (2008) Chih-Fu Yang et al. JOURNAL OF MATERIALS SCIENCE
- Irradiation behavior of nanostructured 316 austenitic stainless steel
- (2008) B. Radiguet et al. JOURNAL OF MATERIALS SCIENCE
- Improvement of room-temperature superplasticity in Zn–22wt.%Al alloy
- (2008) Shao Hua Xia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Scale up and application of equal-channel angular extrusion for the electronics and aerospace industries
- (2008) Stephane Ferrasse et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of severe plastic deformation by various asymmetric rolling processes
- (2008) Y.H. Ji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Scaling-Up of High Pressure Torsion Using Ring Shape
- (2008) Kaveh Edalati et al. MATERIALS TRANSACTIONS
- Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties
- (2008) Yan-Ling Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Radiation tolerance in a nanostructure: Is smaller better?
- (2008) T.D. Shen NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
- Comparison of the pressure dependences ofTcin the trivalentd-electron superconductors Sc, Y, La, and Lu up to megabar pressures
- (2008) M. Debessai et al. PHYSICAL REVIEW B
- Using high-pressure torsion for metal processing: Fundamentals and applications
- (2008) A ZHILYAEV et al. PROGRESS IN MATERIALS SCIENCE
- Inverse Temperature Dependence of Toughness in an Ultrafine Grain-Structure Steel
- (2008) Y. Kimura et al. SCIENCE
- High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
- (2008) B. Poudel et al. SCIENCE
- Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation
- (2008) X. Sauvage et al. SCRIPTA MATERIALIA
- Enhanced ion irradiation resistance of bulk nanocrystalline TiNi alloy
- (2008) A.R. Kilmametov et al. SCRIPTA MATERIALIA
- Fracture toughness study of new Zr-based Be-bearing bulk metallic glasses
- (2008) C. Paul Kim et al. SCRIPTA MATERIALIA
- Combination of surface nanocrystallization and co-rolling: Creating multilayer nanocrystalline composites
- (2008) L. Waltz et al. SCRIPTA MATERIALIA
- Severe plastic deformation of metals by high-pressure tube twisting
- (2008) L TOTH et al. SCRIPTA MATERIALIA
- Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys
- (2008) S. Bagheri et al. SURFACE ENGINEERING
- Shears, Vortices, and Mixing During Twist Extrusion
- (2008) Y. Beygelzimer et al. International Journal of Material Forming
- On the effect of equal-channel angular pressing on creep of tempered martensite ferritic steels
- (2007) A. Kostka et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion
- (2007) N. Lugo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation
- (2007) Daria Setman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Change in Mechanical Properties and Microstructure of ARB Processed Ti during Annealing
- (2007) Daisuke Terada et al. MATERIALS TRANSACTIONS
- High-pressure torsion using ring specimens
- (2007) Yosuke Harai et al. SCRIPTA MATERIALIA
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started