High‐Resolution 3D Printing for Electronics

3D Printing of Lightweight Polyimide Honeycombs with the High Specific Strength and Temperature Resistance

(2021) Chengyang Wang et al.   ACS Applied Materials & Interfaces

Ultrasensitive 3D Aerosol-Jet-Printed Perovskite X-ray Photodetector

(2021) Anastasiia Glushkova et al.   ACS Nano

Electrically Tunable Surface Acoustic Wave Propagation at MHz Frequencies Based on Carbon Nanotube Thin‐Film Transistors

(2021) Chen Shen et al.   ADVANCED FUNCTIONAL MATERIALS

Additive manufacturing of polymeric scaffolds for biomimetic cell membrane engineering

(2021) David Sabaté Rovira et al.   MATERIALS & DESIGN

Ionic Liquid-Assisted 3D Printing of Self-Polarized β-PVDF for Flexible Piezoelectric Energy Harvesting

(2021) Xingang Liu et al.   ACS Applied Materials & Interfaces

A Three-Dimensional Printable Liquid Metal-Like Ag Nanoparticle Ink for Making a Super-Stretchable and Highly Cyclic Durable Strain Sensor

(2021) Hai-Jun Huang et al.   ACS Applied Materials & Interfaces

Microstructures in All-Inkjet-Printed Textile Capacitors with Bilayer Interfaces of Polymer Dielectrics and Metal–Organic Decomposition Silver Electrodes

(2021) Inhwan Kim et al.   ACS Applied Materials & Interfaces

Three-dimensional nanoprinting via charged aerosol jets

(2021) Wooik Jung et al.   NATURE

Liquid Metal‐Based Soft Electronics for Wearable Healthcare

(2021) Young‐Geun Park et al.   Advanced Healthcare Materials

Smart contact lens and transparent heat patch for remote monitoring and therapy of chronic ocular surface inflammation using mobiles

(2021) Jiuk Jang et al.   Science Advances

A soft and transparent contact lens for the wireless quantitative monitoring of intraocular pressure

(2021) Joohee Kim et al.   Nature Biomedical Engineering

3D-Printed Self-Healing Elastomers for Modular Soft Robotics

(2021) Eliot F. Gomez et al.   ACS Applied Materials & Interfaces

3D Heterogeneous Device Arrays for Multiplexed Sensing Platforms Using Transfer of Perovskites

(2021) Jiuk Jang et al.   ADVANCED MATERIALS

Ultra‐Deformable and Tissue‐Adhesive Liquid Metal Antennas with High Wireless Powering Efficiency

(2021) Kento Yamagishi et al.   ADVANCED MATERIALS

3D Electrodes for Bioelectronics

(2021) Yo Han Cho et al.   ADVANCED MATERIALS

A 3D-printed, alternatively tilt-polarized PVDF-TrFE polymer with enhanced piezoelectric effect for self-powered sensor application

(2021) Xiaoting Yuan et al.   Nano Energy

Porous structures prepared by a novel route: Combination of digital light processing 3D printing and leaching method

(2021) Thi Hong Men Nguyen et al.   Journal of Manufacturing Processes

High-resolution two-photon polymerization: the most versatile technique for the fabrication of microneedle arrays

(2021) Zahra Faraji Rad et al.   Microsystems & Nanoengineering

Direct Fabrication of VIA Interconnects by Electrohydrodynamic Printing for Multi‐Layer 3D Flexible and Stretchable Electronics

(2021) Ping Ren et al.   Advanced Materials Technologies

Direct ink writing of three-dimensional thermoelectric microarchitectures

(2021) Fredrick Kim et al.   Nature Electronics

Continuous fast 3D printing of SiOC ceramic components

(2021) Chong He et al.   Additive Manufacturing

3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors

(2020) Shuqiang Peng et al.   ACS Applied Materials & Interfaces

Parallel, Multi‐Material Electrohydrodynamic 3D Nanoprinting

(2020) Mojun Chen et al.   Small

Ultrafast 3D printing with submicrometer features using electrostatic jet deflection

(2020) Ievgenii Liashenko et al.   Nature Communications

Fully R2R‐Printed Carbon‐Nanotube‐Based Limitless Length of Flexible Active‐Matrix for Electrophoretic Display Application

(2020) Junfeng Sun et al.   Advanced Electronic Materials

Untethered Soft Robotics with Fully Integrated Wireless Sensing and Actuating Systems for Somatosensory and Respiratory Functions

(2020) Byungkook Oh et al.   Soft Robotics

Ultrahigh areal number density solid-state on-chip microsupercapacitors via electrohydrodynamic jet printing

(2020) Kwon-Hyung Lee et al.   Science Advances

3D printing of conducting polymers

(2020) Hyunwoo Yuk et al.   Nature Communications

Simultaneously defined semiconducting channel layer using electrohydrodynamic jet printing of a passivation layer for oxide thin-film transistors

(2020) Seonghwan Hong et al.   ACS Applied Materials & Interfaces

3D-Printed Quantum Dot Nanopixels

(2020) Jongcheon Bae et al.   ACS Nano

Liquid‐Crystal‐Elastomer‐Based Dissipative Structures by Digital Light Processing 3D Printing

(2020) Nicholas A. Traugutt et al.   ADVANCED MATERIALS

All-printed nanomembrane wireless bioelectronics using a biocompatible solderable graphene for multimodal human-machine interfaces

(2020) Young-Tae Kwon et al.   Nature Communications

Smart, soft contact lens for wireless immunosensing of cortisol

(2020) Minjae Ku et al.   Science Advances

Tunable structural color of bottlebrush block copolymers through direct-write 3D printing from solution

(2020) Bijal B. Patel et al.   Science Advances

3D printed deformable sensors

(2020) Zhijie Zhu et al.   Science Advances

Liquid Metal Direct Write and 3D Printing: A Review

(2020) Taylor V. Neumann et al.   Advanced Materials Technologies

High‐Resolution Pixelated Light Emitting Diodes Based on Electrohydrodynamic Printing and Coffee‐Ring‐Free Quantum Dot Film

(2020) Hegeng Li et al.   Advanced Materials Technologies

Uniform and Stable Aerosol Jet Printing of Carbon Nanotube Thin-Film Transistors by Ink Temperature Control

(2020) Shiheng Lu et al.   ACS Applied Materials & Interfaces

Form‐Factor Free 3D Copper Circuits by Surface‐Conformal Direct Printing and Laser Writing

(2020) Yejin Jo et al.   ADVANCED FUNCTIONAL MATERIALS

A Review of Stereolithography: Processes and Systems

(2020) Jigang Huang et al.   Processes

A comprehensive review of the photopolymerization of ceramic resins used in stereolithography

(2020) Setareh Zakeri et al.   Additive Manufacturing

Radiation-hardened and repairable integrated circuits based on carbon nanotube transistors with ion gel gates

(2020) Maguang Zhu et al.   Nature Electronics

Degradable and Fully Recyclable Dynamic Thermoset Elastomer for 3D‐Printed Wearable Electronics

(2020) Yifan Guo et al.   ADVANCED FUNCTIONAL MATERIALS

A Wearable Transient Pressure Sensor Made with MXene Nanosheets for Sensitive Broad-Range Human-Machine Interfacing

(2019) Ying Guo et al.   NANO LETTERS

Freestanding Functional Structures by Aerosol-Jet Printing for Stretchable Electronics and Sensing Applications

(2019) Qingshen Jing et al.   Advanced Materials Technologies

Metallic Nanoparticle Inks for 3D Printing of Electronics

(2019) Hong Wei Tan et al.   Advanced Electronic Materials

Volumetric additive manufacturing via tomographic reconstruction

(2019) Brett E. Kelly et al.   SCIENCE

3D Printed High-Performance Lithium Metal Microbatteries Enabled by Nanocellulose

(2019) Daxian Cao et al.   ADVANCED MATERIALS

Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage

(2019) Yuxiong Guo et al.   ADVANCED ENGINEERING MATERIALS

Super-stretchable and processable silicone elastomers by digital light processing 3D printing

(2019) Tingting Zhao et al.   ACS Applied Materials & Interfaces

Self-Healing Four-Dimensional Printing with an Ultraviolet Curable Double-Network Shape Memory Polymer System

(2019) Biao Zhang et al.   ACS Applied Materials & Interfaces

Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing

(2019) Longyu Li et al.   CHEMISTRY-A EUROPEAN JOURNAL

Three-Dimensional, High-Resolution Printing of Carbon Nanotube/Liquid Metal Composites with Mechanical and Electrical Reinforcement

(2019) Young-Geun Park et al.   NANO LETTERS

Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon Polymerization

(2019) Lei Zheng et al.   Nanoscale Research Letters

Multi-metal electrohydrodynamic redox 3D printing at the submicron scale

(2019) Alain Reiser et al.   Nature Communications

Second Skin Enabled by Advanced Electronics

(2019) Jin Young Oh et al.   Advanced Science

Interactive Skin Display with Epidermal Stimuli Electrode

(2019) Eui Hyuk Kim et al.   Advanced Science

Human‐Interactive, Active‐Matrix Displays for Visualization of Tactile Pressures

(2019) Jiuk Jang et al.   Advanced Materials Technologies

Shear‐Driven Direct‐Write Printing of Room Temperature Gallium‐Based Liquid Metal Alloys

(2019) Alexander Cook et al.   ADVANCED ENGINEERING MATERIALS

Towards Three‐Dimensional Printed Electronics: Inkjet‐Printed Vertical Metal Wire Interconnects and Screen‐Printed Batteries

(2019) Enrico Sowade et al.   ADVANCED ENGINEERING MATERIALS

Dynamic Photomask-Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator

(2019) Kaijuan Chen et al.   ADVANCED FUNCTIONAL MATERIALS

A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing

(2019) N. J. Wilkinson et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Advances in additive manufacturing for bone tissue engineering scaffolds

(2019) Ana Paula Moreno Madrid et al.   Materials Science & Engineering C-Materials for Biological Applications

Additive-free MXene inks and direct printing of micro-supercapacitors

(2019) Chuanfang Zhang et al.   Nature Communications

Patterning of High-Viscosity Silver Paste by an Electrohydrodynamic-Jet Printer for Use in TFT Applications

(2019) Thi Thu Thuy Can et al.   Scientific Reports

High-resolution, reconfigurable printing of liquid metals with three-dimensional structures

(2019) Young-Geun Park et al.   Science Advances

3D Nanoprinting of Perovskites

(2019) Mojun Chen et al.   ADVANCED MATERIALS

Platform for wireless pressure sensing with built-in battery and instant visualization

(2019) Woon Hyung Cheong et al.   Nano Energy

Metal−Organic Decomposition Ink for Printed Electronics

(2019) Yejung Choi et al.   Advanced Materials Interfaces

Miniature Pneumatic Actuators for Soft Robots by High‐Resolution Multimaterial 3D Printing

(2019) Yuan‐Fang Zhang et al.   Advanced Materials Technologies

Instantaneous and Repeatable Self-Healing of Fully Metallic Electrodes at Ambient Conditions

(2019) Young-Geun Park et al.   ACS Applied Materials & Interfaces

All‐Printed Flexible and Stretchable Electronics with Pressing or Freezing Activatable Liquid‐Metal–Silicone Inks

(2019) Lu‐yu Zhou et al.   ADVANCED FUNCTIONAL MATERIALS

Mechanoluminescent, Air-Dielectric MoS2 Transistors as Active-Matrix Pressure Sensors for Wide Detection Ranges from Footsteps to Cellular Motions

(2019) Jiuk Jang et al.   NANO LETTERS

Voxelated soft matter via multimaterial multinozzle 3D printing

(2019) Mark A. Skylar-Scott et al.   NATURE

How to print multi-material devices in one go

(2019) Johannes T. B. Overvelde   NATURE

Recent Progress in Wireless Sensors for Wearable Electronics

(2019) Young-Geun Park et al.   SENSORS

Structured multimaterial filaments for 3D printing of optoelectronics

(2019) Gabriel Loke et al.   Nature Communications

Fabrication and Characterization of Fully Inkjet Printed Capacitors Based on Ceramic/Polymer Composite Dielectrics on Flexible Substrates

(2019) Morten Mikolajek et al.   Scientific Reports

High‐Resolution 3D Printing of Freeform, Transparent Displays in Ambient Air

(2019) Hyeon Seok An et al.   Advanced Science

Polymerizable Ceramic Ink System for Thin Inkjet-Printed Dielectric Layers

(2019) Timo Reinheimer et al.   ACS Applied Materials & Interfaces

Direct Electrohydrodynamic Patterning of High-Performance All Metal Oxide Thin-Film Electronics

(2019) You Liang et al.   ACS Nano

Near-Field Electrospinning for Three-Dimensional Stacked Nanoarchitectures with High Aspect Ratios

(2019) Yang-Seok Park et al.   NANO LETTERS

Wireless phototherapeutic contact lenses and glasses with red light-emitting diodes

(2019) Young-Geun Park et al.   Nano Research

Graphene/Au Hybrid Antenna Coil Exfoliated with Multi‐Stacked Graphene Flakes for Ultra‐Thin Biomedical Devices

(2019) Yuma Tetsu et al.   Advanced Electronic Materials

Direct Writing and Characterization of Three-Dimensional Conducting Polymer PEDOT Arrays

(2018) Peikai Zhang et al.   ACS Applied Materials & Interfaces

3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing

(2018) Xiao Kuang et al.   ACS Applied Materials & Interfaces

Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels

(2018) Xingwei Tang et al.   ACS Nano

Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes

(2018) Steven D. Lacey et al.   ADVANCED MATERIALS

3D-Printing Electrolytes for Solid-State Batteries

(2018) Dennis W. McOwen et al.   ADVANCED MATERIALS

Stretchable All-Gel-State Fiber-Shaped Supercapacitors Enabled by Macromolecularly Interconnected 3D Graphene/Nanostructured Conductive Polymer Hydrogels

(2018) Panpan Li et al.   ADVANCED MATERIALS

Soft Somatosensitive Actuators via Embedded 3D Printing

(2018) Ryan L. Truby et al.   ADVANCED MATERIALS

3D Printed Functional and Biological Materials on Moving Freeform Surfaces

(2018) Zhijie Zhu et al.   ADVANCED MATERIALS

Additive Manufacturing Technologies: 3D Printing in Organic Synthesis

(2018) Sergio Rossi et al.   ChemCatChem

Functional inks and printing of two-dimensional materials

(2018) Guohua Hu et al.   CHEMICAL SOCIETY REVIEWS

Double-Network Nanostructured Hydrogel-Derived Ultrafine Sn–Fe Alloy in Three-Dimensional Carbon Framework for Enhanced Lithium Storage

(2018) Hongxia Shi et al.   NANO LETTERS

Printed ion-gel transistor using electrohydrodynamic (EHD) jet printing process

(2018) Eun Mi Jung et al.   ORGANIC ELECTRONICS

Additive manufacturing of 3D nano-architected metals

(2018) Andrey Vyatskikh et al.   Nature Communications

A low temperature and air-sinterable copper–diamine complex-based metal organic decomposition ink for printed electronics

(2018) Yue Dong et al.   Journal of Materials Chemistry C

Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor

(2018) Yun Bai et al.   MATERIALS & DESIGN

Printing Silver Conductive Inks with High Resolution and High Aspect Ratio

(2018) Ta-Ya Chu et al.   Advanced Materials Technologies

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries

(2018) Meng Cheng et al.   ADVANCED MATERIALS

Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization

(2018) Ian D. Robertson et al.   NATURE

Fully Aerosol-Jet Printed, High-Performance Nanoporous ZnO Ultraviolet Photodetectors

(2018) Anubha A Gupta et al.   ACS Photonics

Simultaneous Monitoring of Sweat and Interstitial Fluid Using a Single Wearable Biosensor Platform

(2018) Jayoung Kim et al.   Advanced Science

High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices

(2018) Chanhoon Kim et al.   ACS Nano

Full 3D Printing of Stretchable Piezoresistive Sensor with Hierarchical Porosity and Multimodulus Architecture

(2018) Ziya Wang et al.   ADVANCED FUNCTIONAL MATERIALS

Enhanced continuous liquid interface production with track-etched membrane

(2018) Wenxiong Lin et al.   RAPID PROTOTYPING JOURNAL

Sustainable production of highly conductive multilayer graphene ink for wireless connectivity and IoT applications

(2018) Kewen Pan et al.   Nature Communications

Three-dimensional monolithic integration in flexible printed organic transistors

(2018) Jimin Kwon et al.   Nature Communications

3D Printed Disposable Wireless Ion Sensors with Biocompatible Cellulose Composites

(2018) Taeil Kim et al.   Advanced Electronic Materials

Four Degrees-of-Freedom Direct Writing of Liquid Metal Patterns on Uneven Surfaces

(2018) Young Yoon et al.   Advanced Materials Technologies

Toward a remarkable Li-S battery via 3D printing

(2018) Xuejie Gao et al.   Nano Energy

Control of Gallium Oxide Growth on Liquid Metal Eutectic Gallium/Indium Nanoparticles via Thiolation

(2017) Zachary J. Farrell et al.   LANGMUIR

Two-photon polymerization for biological applications

(2017) Alexander K. Nguyen et al.   Materials Today

A lightweight waveguide horn antenna made via 3D printing and conductive spray coating

(2017) Jinpil Tak et al.   MICROWAVE AND OPTICAL TECHNOLOGY LETTERS

3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers

(2017) Yejin Jo et al.   Nanoscale

Screen printable MWCNT inks for printed electronics

(2017) Heera Menon et al.   RSC Advances

Smart Sensor Systems for Wearable Electronic Devices

(2017) Byeong Wan An et al.   Polymers

Completely Printed, Flexible, Stable, and Hysteresis-Free Carbon Nanotube Thin-Film Transistors via Aerosol Jet Printing

(2017) Changyong Cao et al.   Advanced Electronic Materials

Additive Manufacturing: Unlocking the Evolution of Energy Materials

(2017) Adilet Zhakeyev et al.   Advanced Science

Metallic, 3D-Printed, K-Band-Stepped, Double-Ridged Square Horn Antennas

(2017) Bing Zhang et al.   Applied Sciences-Basel

Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources

(2017) Keun-Ho Choi et al.   ACS Energy Letters

Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

(2017) Yihui Zhang et al.   Nature Reviews Materials

3D Inkjet Printing of Electronics Using UV Conversion

(2017) Ehab Saleh et al.   Advanced Materials Technologies

Electrohydrodynamic (EHD) Printing of Molten Metal Ink for Flexible and Stretchable Conductor with Self-Healing Capability

(2017) Yiwei Han et al.   Advanced Materials Technologies

Multifurcation Assembly of Charged Aerosols and Its Application to 3D Structured Gas Sensors

(2016) Yongjun Bae et al.   ADVANCED MATERIALS

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

(2016) Kun Fu et al.   ADVANCED MATERIALS

The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling

(2016) Seong Jin An et al.   CARBON

Electrically small folded spherical helix antennas using copper strips and 3D printing technology

(2016) M. Kong et al.   ELECTRONICS LETTERS

A Fully Inkjet-Printed 3-D Honeycomb-Inspired Patch Antenna

(2016) Garret McKerricher et al.   IEEE Antennas and Wireless Propagation Letters

Flexible and wearable 2.45 GHz CPW-fed antenna using inkjet-printing of silver nanoparticles on pet substrate

(2016) Xiaohui Guo et al.   MICROWAVE AND OPTICAL TECHNOLOGY LETTERS

High-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance

(2016) S.-Y. Kim et al.   Nanoscale

Layerless fabrication with continuous liquid interface production

(2016) Rima Janusziewicz et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Laser-assisted direct ink writing of planar and 3D metal architectures

(2016) Mark A. Skylar-Scott et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Flexible inkjet printed high-k HfO2-based MIM capacitors

(2016) G. Vescio et al.   Journal of Materials Chemistry C

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

(2016) Thomas J. Hinton et al.   ACS Biomaterials-Science & Engineering

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

(2016) Thomas J. Hinton et al.   ACS Biomaterials Science & Engineering

Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks

(2016) Abhishek Gannarapu et al.   Advanced Materials Technologies

Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes

(2015) Julian Schneider et al.   ADVANCED FUNCTIONAL MATERIALS

High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks

(2015) Byeong Wan An et al.   ADVANCED MATERIALS

3D Printing of Shape Memory Polymers for Flexible Electronic Devices

(2015) Matt Zarek et al.   ADVANCED MATERIALS

The status, challenges, and future of additive manufacturing in engineering

(2015) Wei Gao et al.   COMPUTER-AIDED DESIGN

Highly efficient flexible optoelectronic devices using metal nanowire-conducting polymer composite transparent electrode

(2015) Eui Dae Jung et al.   Electronic Materials Letters

Slicing algorithms for multi-axis 3-D metal printing of overhangs

(2015) Kyubok Lee et al.   Journal of Mechanical Science and Technology

Thick Electrodes for High Energy Lithium Ion Batteries

(2015) M. Singh et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

An oxidized liquid metal-based microfluidic platform for tunable electronic device applications

(2015) Guangyong Li et al.   LAB ON A CHIP

Li-ion battery materials: present and future

(2015) Naoki Nitta et al.   Materials Today

High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes

(2015) Bong Hoon Kim et al.   NANO LETTERS

High-resolution electrohydrodynamic jet printing of small-molecule organic light-emitting diodes

(2015) Kukjoo Kim et al.   Nanoscale

Uniform Aerosol Jet printed polymer lines with 30μm width for 140ppi resolution RGB organic light emitting diodes

(2015) Jeffrey G. Tait et al.   ORGANIC ELECTRONICS

Continuous liquid interface production of 3D objects

(2015) J. R. Tumbleston et al.   SCIENCE

Direct Printing of Reduced Graphene Oxide on Planar or Highly Curved Surfaces with High Resolutions Using Electrohydrodynamics

(2015) Byeong Wan An et al.   Small

Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing

(2015) M. Serdar Onses et al.   Small

Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

(2015) Muhammad R. Niazi et al.   Nature Communications

Printable poly(methylsilsesquioxane) dielectric ink and its application in solution processed metal oxide thin-film transistors

(2015) Xinzhou Wu et al.   RSC Advances

Fully Inkjet-Printed Transparent Oxide Thin Film Transistors Using a Fugitive Wettability Switch

(2015) Jaewon Jang et al.   Advanced Electronic Materials

Aerosol Jet Printed p- and n-type Electrolyte-Gated Transistors with a Variety of Electrode Materials: Exploring Practical Routes to Printed Electronics

(2014) Kihyon Hong et al.   ACS Applied Materials & Interfaces

Three-Dimensional Inkjet-Printed Interconnects using Functional Metallic Nanoparticle Inks

(2014) Jacob A. Sadie et al.   ADVANCED FUNCTIONAL MATERIALS

Aerosol Jet Printed, Sub-2 V Complementary Circuits Constructed fromP- andN-Type Electrolyte Gated Transistors

(2014) Kihyon Hong et al.   ADVANCED MATERIALS

Soluble Organic Semiconductor Precursor with Specific Phase Separation for High-Performance Printed Organic Transistors

(2014) Yu Kimura et al.   ADVANCED MATERIALS

A new nanocomposite dielectric ink and its application in printed thin-film transistors

(2014) Xinzhou Wu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

3D Printing of Free Standing Liquid Metal Microstructures

(2013) Collin Ladd et al.   ADVANCED MATERIALS

3D Printing of Interdigitated Li-Ion Microbattery Architectures

(2013) Ke Sun et al.   ADVANCED MATERIALS

Carbon nanotube ink for writing on cellulose paper

(2013) Jin-Woo Han et al.   MATERIALS RESEARCH BULLETIN

Scalable, printable, surfactant-free graphene ink directly from graphite

(2013) X Han et al.   NANOTECHNOLOGY

Metal salt-derived In–Ga–Zn–O semiconductors incorporating formamide as a novel co-solvent for producing solution-processed, electrohydrodynamic-jet printed, high performance oxide transistors

(2013) Sunho Jeong et al.   Journal of Materials Chemistry C

High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP)

(2013) Kotaro Obata et al.   Light-Science & Applications

Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink

(2012) Mohammad Vaseem et al.   ACS Applied Materials & Interfaces

Inkjet printing of conductive materials: a review

(2012) Gerard Cummins et al.   CIRCUIT WORLD

Development of functional sub-100 nm structures with 3D two-photon polymerization technique and optical methods for characterization

(2012) V. Ferreras Paz et al.   JOURNAL OF LASER APPLICATIONS

Fabrication of platinum-decorated single-walled carbon nanotube based hydrogen sensors by aerosol jet printing

(2012) Rui Liu et al.   NANOTECHNOLOGY

Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets

(2012) P. Galliker et al.   Nature Communications

Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces

(2011) Jacob J. Adams et al.   ADVANCED MATERIALS

IR-sintering of ink-jet printed metal-nanoparticles on paper

(2011) Daniel Tobjörk et al.   THIN SOLID FILMS

Multi-material stereolithography

(2010) Jae-Won Choi et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Nanoscale, Electrified Liquid Jets for High-Resolution Printing of Charge

(2010) Jang-Ung Park et al.   NANO LETTERS

Meniscus-Confined Three-Dimensional Electrodeposition for Direct Writing of Wire Bonds

(2010) J. Hu et al.   SCIENCE

High-kOrganic, Inorganic, and Hybrid Dielectrics for Low-Voltage Organic Field-Effect Transistors

(2009) Rocío Ponce Ortiz et al.   CHEMICAL REVIEWS

Writing simple RF electronic devices on paper with carbon nanotube ink

(2009) M Dragoman et al.   NANOTECHNOLOGY

Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes

(2009) B. Y. Ahn et al.   SCIENCE

Eutectic Gallium-Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature

(2008) Michael D. Dickey et al.   ADVANCED FUNCTIONAL MATERIALS