Metallic Nanoparticle Inks for 3D Printing of Electronics

Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics

(2019) Guo Liang Goh et al.   Advanced Materials Interfaces

Single Additive Enables 3D Printing of Highly Loaded Iron Oxide Suspensions

(2018) Amin Hodaei et al.   ACS Applied Materials & Interfaces

Electrical Contacts in SOI MEMS Using Aerosol Jet Printing

(2018) Behnam Khorramdel et al.   IEEE Journal of the Electron Devices Society

Iron Oxide Nanoparticle-Based Magnetic Ink Development for Fully Printed Tunable Radio-Frequency Devices

(2018) Mohammad Vaseem et al.   Advanced Materials Technologies

Selective laser sintering of inkjet-printed silver nanoparticle inks on paper substrates to achieve highly conductive patterns

(2018) Enkeleda Balliu et al.   Scientific Reports

Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering

(2018) Shweta Agarwala et al.   ACS Sensors

A laser curable palladium complex ink used for fabrication of copper pattern on polyimide substrate

(2017) Po-Chiang Wang et al.   Journal of the Taiwan Institute of Chemical Engineers

3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers

(2017) Yejin Jo et al.   Nanoscale

Gold Nanoparticles as a Direct and Rapid Sensor for Sensitive Analytical Detection of Biogenic Amines

(2017) K. M. A. El-Nour et al.   Nanoscale Research Letters

Multi-pulse flash light sintering of bimodal Cu nanoparticle-ink for highly conductive printed Cu electrodes

(2017) Myeong-Hyeon Yu et al.   NANOTECHNOLOGY

Development of bendable strain sensor with embedded microchannels using 3D printing

(2017) Shweta Agarwala et al.   SENSORS AND ACTUATORS A-PHYSICAL

Gold Nanoparticles as a Direct and Rapid Sensor for Sensitive Analytical Detection of Biogenic Amines

(2017) K. M. A. El-Nour et al.   Nanoscale Research Letters

3D Inkjet Printing of Electronics Using UV Conversion

(2017) Ehab Saleh et al.   Advanced Materials Technologies

Intensive Plasmonic Flash Light Sintering of Copper Nanoinks Using a Band-Pass Light Filter for Highly Electrically Conductive Electrodes in Printed Electronics

(2016) Yeon-Taek Hwang et al.   ACS Applied Materials & Interfaces

Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors

(2016) Yiheng Qin et al.   ADVANCED FUNCTIONAL MATERIALS

Noble metal-based bimetallic nanoparticles: the effect of the structure on the optical, catalytic and photocatalytic properties

(2016) Adriana Zaleska-Medynska et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

The preparation of pH-sensitive Pd catalyst ink for selective electroless deposition of copper on a flexible PET substrate

(2016) Po-Chiang Wang et al.   Journal of the Taiwan Institute of Chemical Engineers

IR-sintering efficiency on inkjet-printed conductive structures on paper substrates

(2016) Cristina Gaspar et al.   MICROELECTRONIC ENGINEERING

Gold nanorods with conjugated polymer ligands: sintering-free conductive inks for printed electronics

(2016) B. Reiser et al.   Chemical Science

Sintering mechanism of the Cu–Ag core–shell nanoparticle paste at low temperature in ambient air

(2016) Yanhong Tian et al.   RSC Advances

Dispensing of high concentration Ag nano-particles ink for ultra-low resistivity paper-based writing electronics

(2016) Fuliang Wang et al.   Scientific Reports

Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system

(2016) Janghoon Park et al.   Scientific Reports

Inkjet Printing of Silver Nanowire Networks

(2015) David J. Finn et al.   ACS Applied Materials & Interfaces

Nanoparticles in Photodynamic Therapy

(2015) Sasidharan Swarnalatha Lucky et al.   CHEMICAL REVIEWS

Mechanics of stretchable electronics

(2015) J. Song   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Seed-free synthesis of 1D silver nanowires ink using clove oil (Syzygium Aromaticum) at room temperature

(2015) Alagan Jeevika et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Cobalt Nanoparticle Inks for Printed High Frequency Applications on Polycarbonate

(2015) Mikko Nelo et al.   JOURNAL OF ELECTRONIC MATERIALS

Engineering noble metal nanomaterials for environmental applications

(2015) Jingguo Li et al.   Nanoscale

Laser sintering of copper nanoparticles on top of silicon substrates

(2015) A Soltani et al.   NANOTECHNOLOGY

Cu-Ag core–shell nanoparticles with enhanced oxidation stability for printed electronics

(2015) Changsoo Lee et al.   NANOTECHNOLOGY

Fully-Additive Printed Electronics: Transistor model, process variation and fundamental circuit designs

(2015) Xi Zhang et al.   ORGANIC ELECTRONICS

Production of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion

(2015) Go Kawamura et al.   Scientific Reports

Microwave sintering of Ag-nanoparticle thin films on a polyimide substrate

(2015) S. Fujii et al.   AIP Advances

Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers

(2015) Juha Niittynen et al.   Scientific Reports

Optimisation of manufacturing parameters for inkjet-printed and photonically sintered metallic nanoparticle UHF RFID tags

(2014) Y. Ren et al.   ELECTRONICS LETTERS

A Gold Nanoparticle Ink Suitable for the Fabrication of Electrochemical Electrode by Inkjet Printing

(2014) Mengmeng Deng et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Preparation of conductive Cu patterns by directly writing using nano-Cu ink

(2014) Wei Li et al.   MATERIALS CHEMISTRY AND PHYSICS

Printed electronics integrated with paper-based microfluidics: new methodologies for next-generation health care

(2014) Gareth Jenkins et al.   Microfluidics and Nanofluidics

Photosintering and electrical performance of CuO nanoparticle inks

(2014) Chantal Paquet et al.   ORGANIC ELECTRONICS

Fully printed electronics on flexible substrates: High gain amplifiers and DAC

(2014) Joseph Chang et al.   ORGANIC ELECTRONICS

Conductive Nanomaterials for Printed Electronics

(2014) Alexander Kamyshny et al.   Small

The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste

(2014) Yoon-Jin Kim et al.   THIN SOLID FILMS

A wearable and highly sensitive pressure sensor with ultrathin gold nanowires

(2014) Shu Gong et al.   Nature Communications

Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices

(2014) Sebastian Wünscher et al.   Journal of Materials Chemistry C

Room Temperature Synthesis of a Copper Ink for the Intense Pulsed Light Sintering of Conductive Copper Films

(2013) Ruvini Dharmadasa et al.   ACS Applied Materials & Interfaces

Cu Ion Ink for a Flexible Substrate and Highly Conductive Patterning by Intensive Pulsed Light Sintering

(2013) Byung-Yong Wang et al.   ACS Applied Materials & Interfaces

Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines

(2013) Ankit Mahajan et al.   ACS Applied Materials & Interfaces

Novel Application of Platinum Ink for Counter Electrode Preparation in Dye Sensitized Solar Cells

(2013) Sang Hern Kim et al.   BULLETIN OF THE KOREAN CHEMICAL SOCIETY

Miniaturisation of dual band monopole antennas loaded with screen printed cobalt nanoparticle ink

(2013) Arun K. Sowpati et al.   IET Microwaves Antennas & Propagation

Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas

(2013) Franziska M. Wolf et al.   JOURNAL OF MATERIALS RESEARCH

Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications

(2013) Jolke Perelaer et al.   JOURNAL OF MATERIALS RESEARCH

The pH-sensitive Pd nanoparticles as ink for ink-jet printing technology and electroless Cu metallic patterns on indium-doped tin oxide substrate

(2013) Chun-Chieh Tseng et al.   THIN SOLID FILMS

Effects of the morphology of inkjet printed zinc oxide (ZnO) on thin film transistor performance and seeded ZnO nanorod growth

(2013) Yen Nan Liang et al.   THIN SOLID FILMS

Flash light sintering of nickel nanoparticles for printed electronics

(2013) Sung-Hyeon Park et al.   THIN SOLID FILMS

Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds

(2012) Jolke Perelaer et al.   ADVANCED MATERIALS

Inkjet Printing of Nanoporous Gold Electrode Arrays on Cellulose Membranes for High-Sensitive Paper-Like Electrochemical Oxygen Sensors Using Ionic Liquid Electrolytes

(2012) Chengguo Hu et al.   ANALYTICAL CHEMISTRY

Printability of functional inks on multilayer curtain coated paper

(2012) Roger Bollström et al.   CHEMICAL ENGINEERING AND PROCESSING

Localized atmospheric plasma sintering of inkjet printed silver nanoparticles

(2012) Sebastian Wünscher et al.   JOURNAL OF MATERIALS CHEMISTRY

Synthesis and characterization of highly conductive Sn–Ag bimetallic nanoparticles for printed electronics

(2012) Yun Hwan Jo et al.   JOURNAL OF NANOPARTICLE RESEARCH

An Indium Tin Oxide Conductive Network for Flexible Electronics Produced Using a Cotton Template

(2012) Peiran Hu et al.   Journal of Physical Chemistry C

Highly Transparent and Conductive Films of Densely Aligned Ultrathin Au Nanowire Monolayers

(2012) Ana Sánchez-Iglesias et al.   NANO LETTERS

In situmonitoring of flash-light sintering of copper nanoparticle ink for printed electronics

(2012) Hyun-Jun Hwang et al.   NANOTECHNOLOGY

Core/Shell Nanoparticles: Classes, Properties, Synthesis Mechanisms, Characterization, and Applications

(2011) Rajib Ghosh Chaudhuri et al.   CHEMICAL REVIEWS

Silver nanoplates as inkjet ink particles for metallization at a low baking temperature of 100°C

(2011) Chien-Liang Lee et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light

(2011) J. S. Kang et al.   JOURNAL OF ELECTRONIC MATERIALS

Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate

(2011) Dong Jun Lee et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Infra-red assisted sintering of inkjet printed silver tracks on paper substrates

(2011) Aurore Denneulin et al.   JOURNAL OF NANOPARTICLE RESEARCH

Utility of nonwovens in the production of integrated electrical circuits via printing conductive inks

(2011) B. Karaguzel et al.   JOURNAL OF THE TEXTILE INSTITUTE

Optical and electrical properties of ink-jet printed indium–tin-oxide nanoparticle films

(2011) Hsiang-Yu Lai et al.   MATERIALS LETTERS

Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes

(2011) Myun-sung Hwang et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Multi-pulsed white light sintering of printed Cu nanoinks

(2011) Won-Suk Han et al.   NANOTECHNOLOGY

Synthesis and characterization of low temperature Sn nanoparticles for the fabrication of highly conductive ink

(2011) Yun Hwan Jo et al.   NANOTECHNOLOGY

Pulsed-laser printing of silver nanoparticles ink: control of morphological properties

(2011) Ludovic Rapp et al.   OPTICS EXPRESS

Inkjet printing of transparent, flexible, organic transistors

(2011) Laura Basiricò et al.   THIN SOLID FILMS

Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics

(2010) Erika Hrehorova et al.   Journal of Display Technology

Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics

(2010) Jongeun Ryu et al.   JOURNAL OF ELECTRONIC MATERIALS

Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials

(2010) Jolke Perelaer et al.   JOURNAL OF MATERIALS CHEMISTRY

Characteristics of Printed Thin Films Using Indium Tin Oxide (ITO) Ink

(2010) Sung-Jei Hong et al.   MATERIALS TRANSACTIONS

Preparation of Indium Tin Oxide Inks for Electrically Conductive Transparent Oxide Film with Ink-Jet Printing Method

(2010) JeJeong Yu et al.   MOLECULAR CRYSTALS AND LIQUID CRYSTALS

Printed all-polymer electrochemical transistors on patterned ion conducting membranes

(2010) Nikolai Kaihovirta et al.   ORGANIC ELECTRONICS

On the application potential of gold nanoparticles in nanoelectronics and biomedicine

(2010) M. Homberger et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

FORMULATION OF SCREEN PRINTABLE COBALT NANOPARTICLE INK FOR HIGH FREQUENCY APPLICATIONS

(2010) Mikko Nelo et al.   Progress in Electromagnetics Research-PIER

Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability

(2010) Shlomo Magdassi et al.   Materials

A novel method to produce Pd nanoparticle ink for ink-jet printing technology

(2009) Chun-Chieh Tseng et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Applicability of Metallic Nanoparticle Inks in RFID Applications

(2009) M.L. Allen et al.   IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES

Formation of air-stable copper–silver core–shell nanoparticles for inkjet printing

(2009) Michael Grouchko et al.   JOURNAL OF MATERIALS CHEMISTRY

Ink-Jet Printing of Cu−Ag-Based Highly Conductive Tracks on a Transparent Substrate

(2008) Kyoohee Woo et al.   LANGMUIR

Laser annealing of gold nanoparticles thin film using photothermal effect

(2008) Yi-Ting Cheng et al.   MICROELECTRONIC ENGINEERING