Four Degrees-of-Freedom Direct Writing of Liquid Metal Patterns on Uneven Surfaces

Liquid-Metal-Based Super-Stretchable and Structure-Designable Triboelectric Nanogenerator for Wearable Electronics

(2018) Yanqin Yang et al.   ACS Nano

Towards Sub-Microscale Liquid Metal Patterns: Cascade Phase Change Mediated Pick-n-Place Transfer of Liquid Metals Printed and Stretched over a Flexible Substrate

(2018) Doyoon Kim et al.   ADVANCED FUNCTIONAL MATERIALS

Visually Imperceptible Liquid-Metal Circuits for Transparent, Stretchable Electronics with Direct Laser Writing

(2018) Chengfeng Pan et al.   ADVANCED MATERIALS

Printable Superelastic Conductors with Extreme Stretchability and Robust Cycling Endurance Enabled by Liquid-Metal Particles

(2018) Jiangxin Wang et al.   ADVANCED MATERIALS

EGaIn-Metal Interfacing for Liquid Metal Circuitry and Microelectronics Integration

(2018) Kadri Bugra Ozutemiz et al.   Advanced Materials Interfaces

A novel liquid metal patterning technique: voltage induced non-contact electrochemical lithography at room temperature

(2018) Zhenwei Yu et al.   Materials Horizons

3D-Integrated and Multifunctional All-Soft Physical Microsystems Based on Liquid Metal for Electronic Skin Applications

(2018) Min-gu Kim et al.   Advanced Electronic Materials

Multiscale and Uniform Liquid Metal Thin-Film Patterning Based on Soft Lithography for 3D Heterogeneous Integrated Soft Microsystems: Additive Stamping and Subtractive Reverse Stamping

(2018) Min-gu Kim et al.   Advanced Materials Technologies

High thermal conductivity in soft elastomers with elongated liquid metal inclusions

(2017) Michael D. Bartlett et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Defect-free, high resolution patterning of liquid metals using reversibly sealed, reusable polydimethylsiloxane microchannels for flexible electronic applications

(2017) Jinbin Yang et al.   Journal of Materials Chemistry C

Suspension 3D Printing of Liquid Metal into Self-Healing Hydrogel

(2017) Yongze Yu et al.   Advanced Materials Technologies

Photolithography-Based Patterning of Liquid Metal Interconnects for Monolithically Integrated Stretchable Circuits

(2016) Chan Woo Park et al.   ACS Applied Materials & Interfaces

Size-Scalable and High-Density Liquid-Metal-Based Soft Electronic Passive Components and Circuits Using Soft Lithography

(2016) Min-gu Kim et al.   ADVANCED FUNCTIONAL MATERIALS

3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels

(2016) Dishit P. Parekh et al.   LAB ON A CHIP

Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks

(2016) Abhishek Gannarapu et al.   Advanced Materials Technologies

Elastomeric Electronic Skin for Prosthetic Tactile Sensation

(2015) Aaron P. Gerratt et al.   ADVANCED FUNCTIONAL MATERIALS

Development of the Polipo Pressure Sensing System for Dynamic Space-Suited Motion

(2015) Allison Anderson et al.   IEEE SENSORS JOURNAL

Tape Transfer Atomization Patterning of Liquid Alloys for Microfluidic Stretchable Wireless Power Transfer

(2015) Seung Hee Jeong et al.   Scientific Reports

Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels

(2014) Mohammad R. Khan et al.   ADVANCED FUNCTIONAL MATERIALS

Direct Writing of Gallium-Indium Alloy for Stretchable Electronics

(2014) J. William Boley et al.   ADVANCED FUNCTIONAL MATERIALS

Rapid Prototyping for Soft-Matter Electronics

(2014) Tong Lu et al.   ADVANCED FUNCTIONAL MATERIALS

Design and Fabrication of Novel Stretchable Device Arrays on a Deformable Polymer Substrate with Embedded Liquid-Metal Interconnections

(2014) Jangyeol Yoon et al.   ADVANCED MATERIALS

High-Density Soft-Matter Electronics with Micron-Scale Line Width

(2014) B. Arda Gozen et al.   ADVANCED MATERIALS

Wearable soft sensing suit for human gait measurement

(2014) Yiğit Mengüç et al.   INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH

Tape Transfer Printing of a Liquid Metal Alloy for Stretchable RF Electronics

(2014) Seung Jeong et al.   SENSORS

Masked Deposition of Gallium-Indium Alloys for Liquid-Embedded Elastomer Conductors

(2013) Rebecca K. Kramer et al.   ADVANCED FUNCTIONAL MATERIALS

3D Printing of Free Standing Liquid Metal Microstructures

(2013) Collin Ladd et al.   ADVANCED MATERIALS

Self-Healing Stretchable Wires for Reconfigurable Circuit Wiring and 3D Microfluidics

(2013) Etienne Palleau et al.   ADVANCED MATERIALS

3D structures of liquid-phase GaIn alloy embedded in PDMS with freeze casting

(2013) Andrew Fassler et al.   LAB ON A CHIP

Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing

(2013) Arya Tabatabai et al.   LANGMUIR

Direct Desktop Printed-Circuits-on-Paper Flexible Electronics

(2013) Yi Zheng et al.   Scientific Reports

Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core

(2012) Shu Zhu et al.   ADVANCED FUNCTIONAL MATERIALS

Liquid alloy printing of microfluidic stretchable electronics

(2012) Seung Hee Jeong et al.   LAB ON A CHIP

Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces

(2011) Jacob J. Adams et al.   ADVANCED MATERIALS

Characterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices

(2011) Tingyi Liu et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Inherently aligned microfluidic electrodes composed of liquid metal

(2011) Ju-Hee So et al.   LAB ON A CHIP

A non-differential elastomer curvature sensor for softer-than-skin electronics

(2011) C Majidi et al.   Smart Materials and Structures

Hyperelastic pressure sensing with a liquid-embedded elastomer

(2010) Yong-Lae Park et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Reversibly Deformable and Mechanically Tunable Fluidic Antennas

(2009) Ju-Hee So et al.   ADVANCED FUNCTIONAL MATERIALS