标题
Powder metallurgy of titanium – past, present, and future
作者
关键词
-
出版物
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-53
出版商
Informa UK Limited
发表日期
2017-08-29
DOI
10.1080/09506608.2017.1366003
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys
- (2017) James D. Paramore et al. Scientific Reports
- A novel chemical pathway for energy efficient production of Ti metal from upgraded titanium slag
- (2016) Ying Zhang et al. CHEMICAL ENGINEERING JOURNAL
- Direct oxygen removal technique for recycling titanium using molten MgCl2 salt
- (2016) Toru H. Okabe et al. FARADAY DISCUSSIONS
- Fatigue Performance of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Analysis of Current Fatigue Data and Metallurgical Approaches for Improving Fatigue Strength
- (2016) Fei Cao et al. JOM
- The effect of molten salt on oxygen removal from titanium and its alloys using calcium
- (2016) Yang Xia et al. JOURNAL OF MATERIALS SCIENCE
- Direct reduction of synthetic rutile using the FFC process to produce low-cost novel titanium alloys
- (2016) L. L. Benson et al. JOURNAL OF MATERIALS SCIENCE
- Thermodynamic Destabilization of Ti-O Solid Solution by H2 and Deoxygenation of Ti Using Mg
- (2016) Ying Zhang et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- The Nature of Tensile Ductility as Controlled by Extreme-Sized Pores in Powder Metallurgy Ti-6Al-4V Alloy
- (2016) P. Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- New Powder Metallurgical Approach to Achieve High Fatigue Strength in Ti-6Al-4V Alloy
- (2016) Fei Cao et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing
- (2016) Pei Sun et al. POWDER TECHNOLOGY
- Direct oxygen removal technique for recycling titanium using molten MgCl2 salt
- (2016) Toru H. Okabe et al. FARADAY DISCUSSIONS
- An experimental study of the (Ti–6Al–4V)–xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques
- (2015) Pei Sun et al. ACTA MATERIALIA
- Increased Shape Stability and Porosity of Highly Porous Injection-Molded Titanium Parts
- (2015) Alexander M. Laptev et al. ADVANCED ENGINEERING MATERIALS
- Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
- (2015) Y. Y. Sun et al. JOM
- Trace Carbon in Biomedical Beta-Titanium Alloys: Recent Progress
- (2015) D. Zhao et al. JOM
- Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial
- (2015) Dapeng Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Life cycle assessment comparison of emerging and traditional Titanium dioxide manufacturing processes
- (2015) Scott Middlemas et al. JOURNAL OF CLEANER PRODUCTION
- Understanding competing fatigue mechanisms in powder metallurgy Ti–6Al–4V alloy: Role of crack initiation and duality of fatigue response
- (2015) Fei Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase Transformations and Formation of Ultra-Fine Microstructure During Hydrogen Sintering and Phase Transformation (HSPT) Processing of Ti-6Al-4V
- (2015) Pei Sun et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of rheological behaviour of titanium feedstocks formulated with a water-soluble binder system for powder injection moulding
- (2015) G. Thavanayagam et al. POWDER TECHNOLOGY
- A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT)
- (2015) James D. Paramore et al. SCRIPTA MATERIALIA
- A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility
- (2014) M. Yan et al. ACTA MATERIALIA
- Metallurgical and mechanical properties of Ti–24Nb–4Zr–8Sn alloy fabricated by metal injection molding
- (2014) Fırat Kafkas et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and mechanical properties of hot isostatically pressed Ti–6Al–4V alloy
- (2014) Youngmoo Kim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study of metal injection molding of highly porous titanium by physical modeling and direct experiments
- (2014) Nihan Tuncer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of Hot Isostatic Pressing Conditions and Cooling Rate on Microstructure and Properties of Ti–6Al–4V Alloy from Atomized Powder
- (2014) Lei Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant
- (2014) Tatsuya Kikuchi et al. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
- The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys
- (2014) Y.F. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V
- (2014) Ming Yan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A new consumable anode material of titanium oxycarbonitride for the USTB titanium process
- (2014) Qiuyu Wang et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Porous titanium processed by powder injection moulding of titanium hydride and space holders
- (2014) E. Carreño-Morelli et al. POWDER METALLURGY
- Production of titanium grade 4 components by powder injection moulding of titanium hydride
- (2014) E. Carreño-Morelli et al. POWDER METALLURGY
- Titanium carbide precipitation in Ti–22Nb alloy fabricated by metal injection moulding
- (2014) Dapeng Zhao et al. POWDER METALLURGY
- Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
- (2014) M. Yan et al. POWDER METALLURGY
- Impacts of trace carbon on the microstructure of as-sintered biomedical Ti–15Mo alloy and reassessment of the maximum carbon limit
- (2013) M. Yan et al. Acta Biomaterialia
- Direct magnesiothermic reduction of titanium dioxide to titanium powder through combustion synthesis
- (2013) H.H. Nersisyan et al. CHEMICAL ENGINEERING JOURNAL
- Effect of density and pore morphology on fatigue properties of sintered Ti–6Al–4V
- (2013) Yingjie Yan et al. INTERNATIONAL JOURNAL OF FATIGUE
- Behavior of calcium chloride in reduction process of titanium dioxide by calcium vapor
- (2013) Baoqiang Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A New, Energy-Efficient Chemical Pathway for Extracting Ti Metal from Ti Minerals
- (2013) Zhigang Zak Fang et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Microstructure and mechanical behavior of metal injection molded Ti–Nb binary alloys as biomedical material
- (2013) Dapeng Zhao et al. Journal of the Mechanical Behavior of Biomedical Materials
- Impurity (Fe, Cl, and P)-Induced Grain Boundary and Secondary Phases in Commercially Pure Titanium (CP-Ti)
- (2013) M. Yan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Novel fabrication of titanium by pure microwave radiation of titanium hydride powder
- (2013) S.D. Luo et al. SCRIPTA MATERIALIA
- Progress in Titanium Metal Powder Injection Molding
- (2013) Randall German Materials
- Hydrogen Sintering of Titanium to Produce High Density Fine Grain Titanium Alloys
- (2012) Zhigang Zak Fang et al. ADVANCED ENGINEERING MATERIALS
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Titanium Sheet Fabricated from Powder for Industrial Applications
- (2012) W. H. Peter et al. JOM
- Titanium for Automotive Applications: Challenges and Opportunities in Materials and Processing
- (2012) Anil K. Sachdev et al. JOM
- The investigation of die-pressing and sintering behavior of ITP CP-Ti and Ti-6Al-4V powders
- (2012) W. Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development of Ti-6Al-4V and Ti-1Al-8V-5Fe Alloys Using Low-Cost TiH2 Powder Feedstock
- (2012) Vineet V. Joshi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy
- (2012) L. Bolzoni et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of vacuum hot-pressing temperature on the microstructure and mechanical properties of Ti–3Al–2.5V alloy obtained by blended elemental and master alloy addition powders
- (2012) L. Bolzoni et al. MATERIALS CHEMISTRY AND PHYSICS
- Microwave-assisted fabrication of titanium hollow spheres with tailored shell structures for various potential applications
- (2012) P. Yu et al. MATERIALS LETTERS
- Role of Hydrogen in the Process of Sintering of Titanium Powders
- (2012) D. H. Savvakin et al. MATERIALS SCIENCE
- Production of Ti–6Al–4V billet through compaction of blended elemental powders by equal-channel angular pressing
- (2012) Christian Haase et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and mechanical properties of the Ti–6Al–4V alloy produced by vacuum hot-pressing
- (2012) L. Bolzoni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods
- (2012) Bin Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microwave Heating, Isothermal Sintering, and Mechanical Properties of Powder Metallurgy Titanium and Titanium Alloys
- (2012) S. D. Luo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Optimization of Blended-Elemental Powder-Based Titanium Alloy Extrusions for Aerospace Applications
- (2012) Sami M. El-Soudani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview
- (2012) Guian Wen et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
- (2012) Fude Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Preparation method of Ti powder with oxygen concentration of
- (2012) J-M Oh et al. POWDER METALLURGY
- Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti–2.25Mo–1.5Fe alloy
- (2012) M. Yan et al. SCRIPTA MATERIALIA
- In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti–6Al–4V by yttrium hydride
- (2012) M. Yan et al. SCRIPTA MATERIALIA
- The electro-deoxidation of dense titanium dioxide precursors in molten calcium chloride giving a new reaction pathway
- (2011) D.T.L. Alexander et al. ELECTROCHIMICA ACTA
- A literature review of titanium metallurgical processes
- (2011) Wensheng Zhang et al. HYDROMETALLURGY
- Microstructures and mechanical properties of titanium alloy connecting rod made by powder forging process
- (2011) J.W. Qiu et al. MATERIALS & DESIGN
- Inductive hot-pressing of titanium and titanium alloy powders
- (2011) L. Bolzoni et al. MATERIALS CHEMISTRY AND PHYSICS
- Sintering of Ti–10V–2Fe–3Al and mechanical properties
- (2011) Y.F. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Sintering of Titanium in Vacuum by Microwave Radiation
- (2011) S. D. Luo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of atmosphere on microwave heating of titanium powder
- (2011) T Hashiguchi et al. POWDER METALLURGY
- Innovative consolidation of titanium and titanium alloy powders by direct rolling
- (2011) G M D Cantin et al. POWDER METALLURGY
- Cold compaction study of Armstrong Process® Ti–6Al–4V powders
- (2011) W. Chen et al. POWDER TECHNOLOGY
- Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting
- (2011) Mari Koike et al. Materials
- Advanced gas atomization processing for Ti and Ti alloy powder manufacturing
- (2010) A. J. Heidloff et al. JOM
- Characterization of the FFC Cambridge Process for NiTi Production Using In Situ X-Ray Synchrotron Diffraction
- (2010) B. K. Jackson et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Nanostructured Ti Consolidated via Spark Plasma Sintering
- (2010) Osman Ertorer et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Hot-Isostatic-Pressing Parameters on the Microstructure and Properties of Powder Ti-6Al-4V Hot-Isostatically-Pressed Samples
- (2010) K. Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Swelling during sintering of titanium alloys based on titanium hydride powder
- (2010) I. M. Robertson et al. POWDER METALLURGY
- Titanium powder prepared by a rapid exothermic reaction
- (2009) C.W. Won et al. CHEMICAL ENGINEERING JOURNAL
- Reduction of Titanium Dioxide to Metallic Titanium Conducted under the Autogenic Pressure of the Reactants
- (2009) Michal Eshed et al. INORGANIC CHEMISTRY
- The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
- (2009) Dusan Bozic et al. International Journal of Materials Research
- Calciothermic reduction of TiO2: A diagrammatic assessment of the thermodynamic limit of deoxidation
- (2009) K. T. Jacob et al. JOM
- Microstructure and mechanical properties of high Nb containing TiAl alloy parts fabricated by metal injection molding
- (2009) Haoming Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cost Effective Pure Titanium with High Mechanical Response by Oxide Dispersion Strengthening
- (2009) Tomohiro Yoshimura et al. MATERIALS TRANSACTIONS
- Comparison of sintering of titanium and titanium hydride powders
- (2009) I. M. Robertson et al. POWDER METALLURGY
- Novel methods for the production of titanium
- (2008) D. J. Fray INTERNATIONAL MATERIALS REVIEWS
- The powder sintering and isothermal forging of Ti-10V-2Fe-3Al
- (2008) Hongzhen Guo et al. JOM
- A lower carbon footprint process for production of metals from their oxide sources
- (2008) Uday B. Pal JOM
- Heating of metallic powders by microwaves: Experiment and theory
- (2008) V. D. Buchelnikov et al. JOURNAL OF APPLIED PHYSICS
- Production of NiTi via the FFC Cambridge Process
- (2008) Ben Jackson et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- The Production of Ti–Mo Alloys from Mixed Oxide Precursors via the FFC Cambridge Process
- (2008) R. Bhagat et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Production of Ti–W Alloys from Mixed Oxide Precursors via the FFC Cambridge Process
- (2008) R. Bhagat et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- High cycle fatigue behaviour of Ti–6Al–4V fabricated by metal injection moulding technology
- (2008) O.M. Ferri et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rheological and Thermal Debinding Behaviors in Titanium Powder Injection Molding
- (2008) Seong-Jin Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Particle shape modification and related property improvements
- (2007) Guosheng Gai et al. POWDER TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now