The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Authors
Keywords
-
Journal
Applied Sciences-Basel
Volume 11, Issue 18, Pages 8619
Publisher
MDPI AG
Online
2021-09-17
DOI
10.3390/app11188619
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- WAAM process for metal block structure parts based on mixed heat input
- (2021) Junyi Cui et al. The International Journal of Advanced Manufacturing Technology
- Modelling and prediction of surface roughness in wire arc additive manufacturing using machine learning
- (2021) Chunyang Xia et al. JOURNAL OF INTELLIGENT MANUFACTURING
- A novel method of bead modeling and control for wire and arc additive manufacturing
- (2021) Shangyong Tang et al. RAPID PROTOTYPING JOURNAL
- Computationally Efficient Models of High Pressure Rolling for Wire Arc Additively Manufactured Components
- (2021) Valeriy Gornyakov et al. Applied Sciences-Basel
- Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts
- (2021) Davoud Jafari et al. MATERIALS & DESIGN
- Wire and Arc Additive Manufacturing of High‐Strength Low‐Alloy Steel: Microstructure and Mechanical Properties
- (2021) Valdemar R. Duarte et al. ADVANCED ENGINEERING MATERIALS
- Analysis of material property models on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW
- (2021) Yupiter H. P. Manurung et al. Archives of Civil and Mechanical Engineering
- Microstructure Formation and Mechanical Properties of a Wire-Arc Additive Manufactured Magnesium Alloy
- (2021) Thomas Klein et al. JOM
- Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing
- (2021) Yanhu Wang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Preservation of Natural Phase Balance in Multi-pass and Wire Arc Additive Manufacturing-Made Duplex Stainless Steel Structures
- (2021) Farrokh Binesh et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Large-size sprocket repairing based on robotic GMAW additive manufacturing
- (2021) Xinlei Li et al. Welding in the World
- Development of surface coatings for high-strength low alloy steel filler wires and their effect on the weld metal microstructure and properties
- (2021) T. Gehling et al. Welding in the World
- Beneficial use of hyperbaric process conditions for welding of aluminium and copper alloys
- (2021) K. Treutler et al. Welding in the World
- Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges
- (2021) Ana Vafadar et al. Applied Sciences-Basel
- Review on Quality Control Methods in Metal Additive Manufacturing
- (2021) Jungeon Lee et al. Applied Sciences-Basel
- Review on effect of heat input for wire arc additive manufacturing process
- (2021) Nor Ana Rosli et al. Journal of Materials Research and Technology-JMR&T
- Surface finishing of hard-to-machine cladding alloys for highly stressed components
- (2021) Dirk Schroepfer et al. The International Journal of Advanced Manufacturing Technology
- Comparison of wire-arc and powder-laser additive manufacturing for IN718 superalloy: unified consideration for selecting process parameters based on volumetric energy density
- (2021) Xin Lu et al. The International Journal of Advanced Manufacturing Technology
- The Influence of Magnetic Arc Oscillation on the Deposition Width Variation along the Length of Multi-layer Single-Pass Walls Produced by Wire Arc Additive Manufacturing Process
- (2021) Diego Raimundi Corradi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Technology Development for Producing Inconel 625 in Aerospace Application Using Wire Arc Additive Manufacturing Process
- (2021) Anivesh Chintala et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Physical mechanisms in hybrid additive manufacturing: A process design framework
- (2021) Samantha Webster et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of post-printing heat treatment on the microstructure and mechanical properties of a wire arc additive manufactured 420 martensitic stainless steel part
- (2021) Alireza Vahedi Nemani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A model of bead size based on the dynamic response of CMT-based wire and arc additive manufacturing process parameters
- (2021) Xuewei Fang et al. RAPID PROTOTYPING JOURNAL
- Effect of different variants of filler metal S Ni 6625 on properties and microstructure by additive layer manufactured using CMT process
- (2021) Manuela Zinke et al. Welding in the World
- Modeling and simulation of heat transfer, fluid flow and geometry morphology in GMAW-based wire arc additive manufacturing
- (2021) Wenyong Zhao et al. Welding in the World
- Studies on Super Duplex Stainless Steel Manufactured by Wire Arc Additive Manufacturing
- (2021) A. Rajesh Kannan et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- OICP: An Online Fast Registration Algorithm Based on Rigid Translation Applied to Wire Arc Additive Manufacturing of Mold Repair
- (2021) Ruibing Wu et al. Materials
- Research Progress of Arc Additive Manufacture Technology
- (2021) Dan Liu et al. Materials
- Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology
- (2021) Mikel Casuso et al. Metals
- A strut-based process planning method for wire arc additive manufacturing of lattice structures
- (2021) Ziping Yu et al. Journal of Manufacturing Processes
- A practical fabrication strategy for wire arc additive manufacturing of metallic parts with wire structures
- (2021) Ziping Yu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on power-controlled wire-arc additive manufacturing using a data-driven surrogate model
- (2021) Rameez Israr et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue crack growth behaviour of wire and arc additively manufactured ER70S-6 low carbon steel components
- (2021) Anna Ermakova et al. INTERNATIONAL JOURNAL OF FRACTURE
- A review of wire arc additive manufacturing: development, principles, process physics, implementation and current status
- (2021) John Norrish et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Wire Arc Additive Manufacturing of Low-Carbon Mild Steel Using Two Different 3D Printers
- (2021) Y. Ayan et al. PHYSICS OF METALS AND METALLOGRAPHY
- Wire Arc Additive Manufacturing: Review on Recent Findings and Challenges in Industrial Applications and Materials Characterization
- (2021) Mukti Chaturvedi et al. Metals
- Multi-Material Wire Arc Additive Manufacturing of low and high alloyed aluminium alloys with in-situ material analysis
- (2021) Tobias Hauser et al. Journal of Manufacturing Processes
- Performance under tensile loading of point-by-point wire and arc additively manufactured steel bars for structural components
- (2021) Vlad-Alexandru Silvestru et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical characterization of wire arc additively manufactured 2Cr13 thin-wall part
- (2021) Jinguo Ge et al. Journal of Materials Research and Technology-JMR&T
- Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel
- (2021) Vittoria Laghi et al. Additive Manufacturing
- A probabilistic approach for high cycle fatigue of Wire and Arc Additive Manufactured parts taking into account process-induced pores
- (2021) Lorenzo Bercelli et al. Additive Manufacturing
- Fatigue analysis of wire arc additive manufactured (3D printed) components with unmilled surface
- (2021) Helen Bartsch et al. Structures
- A functionally graded material from TC4 to 316L stainless steel fabricated by double-wire + arc additive manufacturing
- (2021) Xinya Chen et al. MATERIALS LETTERS
- A path planning and sharp corner correction strategy for wire and arc additive manufacturing of solid components with polygonal cross-sections
- (2020) H. H. Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing
- (2020) Vittoria Laghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of pulsed metal inert gas (pulsed-MIG) and cold metal transfer (CMT) techniques on hydrogen dissolution in wire arc additive manufacturing (WAAM) of aluminium
- (2020) Karan S. Derekar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of Cooling Rate on the Microstructure and Tensile Properties of Wire-Arc Additive Manufactured Ti–6Al–4V Alloy
- (2020) Hui-Jun Yi et al. METALS AND MATERIALS INTERNATIONAL
- In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: Microstructure characterization and mechanical properties
- (2020) Jun Wang et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural development during wire arc additive manufacturing of copper-based components
- (2020) Justin Baby et al. Welding in the World
- Wire-Based Additive Manufacturing of Stainless Steel Components
- (2020) JOHN W. ELMER et al. WELDING JOURNAL
- Microstructural Characteristics of Wire Arc Additive Manufacturing with Inconel 625 by Super-TIG Welding
- (2020) Muralimohan Cheepu et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- A Novel Method for Improving Weld Seam Properties through Inline Coupling of Welding and Forming
- (2020) Sebastian Härtel et al. Materials
- The Influence of Heat Input on the Microstructure and Properties of Wire-Arc-Additive-Manufactured Al-Cu-Sn Alloy Deposits
- (2020) Shuai Wang et al. Metals
- The Effect of Microstructural Imperfections on Corrosion Fatigue of Additively Manufactured ER70S-6 Alloy Produced by Wire Arc Deposition
- (2020) Tomer Ron et al. Metals
- Microstructure and Mechanical Properties of Low-Carbon High-Strength Steel Fabricated by Wire and Arc Additive Manufacturing
- (2020) Laibo Sun et al. Metals
- Additive Manufacturing with Superduplex Stainless Steel Wire by CMT Process
- (2020) Malin Lervåg et al. Metals
- Effect of Ultrasonic Vibration and Interpass Temperature on Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Fabricated by Wire Arc Additive Manufacturing
- (2020) Wei Chen et al. Metals
- The Microstructure and Properties of an Al-Mg-0.3Sc Alloy Deposited by Wire Arc Additive Manufacturing
- (2020) Lingling Ren et al. Metals
- Wire Arc Additive Manufacturing of Stainless Steels: A Review
- (2020) Wanwan Jin et al. Applied Sciences-Basel
- Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties
- (2020) Z. Zeng et al. Additive Manufacturing
- Modeling of dimensions and investigations on geometrical deviations of metallic components manufactured by μ-plasma transferred arc additive manufacturing process
- (2020) Pravin Kumar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Control of macro-/microstructure and mechanical properties of a wire-arc additive manufactured aluminum alloy
- (2020) Thomas Klein et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation of the effectiveness of Ar-CO2 shielding gas mixture for the wire arc additive process
- (2020) Bishal Silwal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of Vertical and Pinch Rolling on Residual Stress Distributions in Wire and Arc Additively Manufactured Components
- (2020) Reza Tangestani et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Welding parameters prediction for arbitrary layer height in robotic wire and arc additive manufacturing
- (2020) Zeqi Hu et al. Journal of Mechanical Science and Technology
- The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing
- (2020) A.E. Davis et al. MATERIALS CHARACTERIZATION
- The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V
- (2020) J. R. Hönnige et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Wire Laser Arc Additive Manufacture of aluminium zinc alloys
- (2020) E. Eimer et al. Welding in the World
- Measuring the melt pool size in a wire arc additive manufacturing process using a high dynamic range two-colored pyrometric camera
- (2020) C. Halisch et al. Welding in the World
- Multi-material design in additive manufacturing—feasibility validation
- (2020) M. Leicher et al. Welding in the World
- Influence of interpass cooling conditions on microstructure and tensile properties of Ti-6Al-4V parts manufactured by WAAM
- (2020) L. Vázquez et al. Welding in the World
- Effect of niobium on the microstructure and properties of submerged arc welds in HSLA steel
- (2020) T. Patterson et al. Welding in the World
- Effects of Material Properties on Angular Distortion in Wire Arc Additive Manufacturing: Experimental and Computational Analyses
- (2020) Sang-Cheol Park et al. Materials
- Characterisation of a High-Performance Al–Zn–Mg–Cu Alloy Designed for Wire Arc Additive Manufacturing
- (2020) Paulo J. Morais et al. Materials
- Reduction of Energy Input in Wire Arc Additive Manufacturing (WAAM) with Gas Metal Arc Welding (GMAW)
- (2020) Philipp Henckell et al. Materials
- Optimization of Cold Metal Transfer-Based Wire Arc Additive Manufacturing Processes Using Gaussian Process Regression
- (2020) Seung Hwan Lee Metals
- Theoretical Model of Residual Stress and Warpage for Wire and Arc Additive Manufacturing Stiffened Panels
- (2020) Haibin Geng et al. Metals
- A Comparative Study of the CMT+P Process on 316L Stainless Steel Additive Manufacturing
- (2020) Bin Xie et al. Applied Sciences-Basel
- Interlayer closed-loop control of forming geometries for wire and arc additive manufacturing based on fuzzy-logic inference
- (2020) Yongzhe Li et al. Journal of Manufacturing Processes
- An experimental-numerical study of active cooling in wire arc additive manufacturing
- (2020) William Hackenhaar et al. Journal of Manufacturing Processes
- Wire arc additive manufacturing of titanium aluminide alloys using two-wire TOP-TIG welding: processing, microstructures, and mechanical properties
- (2020) Xiaoyu Cai et al. Additive Manufacturing
- Virtual binocular vision sensing and control of molten pool width for gas metal arc additive manufactured thin-walled components
- (2020) Jun Xiong et al. Additive Manufacturing
- A knowledge-based process planning framework for wire arc additive manufacturing
- (2020) Yi Xiong et al. ADVANCED ENGINEERING INFORMATICS
- Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics
- (2020) Ahmet Suat Yildiz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Process planning of automatic wire arc additive remanufacturing for hot forging die
- (2020) Jiansheng Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A thermo-capillary-gravity model for geometrical analysis of single-bead wire and arc additive manufacturing (WAAM)
- (2020) Mohammad Sadegh Mohebbi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire and arc additive manufacturing of 4043 Al alloy using a cold metal transfer method
- (2020) Zhi-qiang Liu et al. International Journal of Minerals Metallurgy and Materials
- Microstructure and mechanical properties of high-strength low alloy steel by wire and arc additive manufacturing
- (2020) Yi-li Dai et al. International Journal of Minerals Metallurgy and Materials
- Control of deposition height in WAAM using visual inspection of previous and current layers
- (2020) Jun Xiong et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Effects of Location on the Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Produced Through Wire Arc Additive Manufacturing
- (2020) Wei Chen et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and mechanical properties of wire arc additive-manufacturing high-carbon chromium bearing steel
- (2020) W. Zhang et al. Materiali in Tehnologije
- Insight into the microstructural features and corrosion properties of wire arc additive manufactured super duplex stainless steel (ER2594)
- (2020) A. Rajesh Kannan et al. MATERIALS LETTERS
- Wire arc additive manufacturing of functionally graded material for marine risers
- (2020) Srinivasan Chandrasekaran et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and performances for 15-5 PH stainless steel fabricated through the wire-arc additive manufacturing technology
- (2020) Chun Guo et al. MATERIALS TECHNOLOGY
- Effect of Sc Content on the Microstructure and Properties of Al–Mg–Sc Alloys Deposited by Wire Arc Additive Manufacturing
- (2020) Lingling Ren et al. METALS AND MATERIALS INTERNATIONAL
- Investigating Isotropy of Mechanical and Wear Properties in As-Deposited and Inter-Layer Cold Worked Specimens Manufactured by Wire Arc Additive Manufacturing
- (2020) Behzad Parvaresh et al. METALS AND MATERIALS INTERNATIONAL
- Process planning based on cylindrical or conical surfaces for five-axis wire and arc additive manufacturing
- (2020) Fusheng Dai et al. RAPID PROTOTYPING JOURNAL
- Increasing the manufacturing efficiency of WAAM by advanced cooling strategies
- (2020) Uwe Reisgen et al. Welding in the World
- Thermo-mechanical simulation of overlaid layers made with wire + arc additive manufacturing and GMAW-cold metal transfer
- (2020) C. Cambon et al. Welding in the World
- Fabrication, characterisation, and finite element analysis of cold metal transfer–based wire and arc additive–manufactured aluminium alloy 4043 cylinder
- (2020) R. Pramod et al. Welding in the World
- Evaluation of tandem controlled short-circuit GMAW for improved deposition in additive manufacture of large Nickel Aluminium Bronze naval components
- (2020) A. Queguineur et al. Welding in the World
- Properties and anisotropy behaviour of a nickel base alloy material produced by robot-based wire and arc additive manufacturing
- (2020) Thomas Hassel et al. Welding in the World
- Arc-welding based additive manufacturing for body reinforcement in automotive engineering
- (2020) A. Josten et al. Welding in the World
- On the Post-Printing Heat Treatment of a Wire Arc Additively Manufactured ER70S Part
- (2020) Alireza Vahedi Nemani et al. Materials
- Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW)
- (2020) Maximilian Gierth et al. Materials
- Analysis of the Wall Geometry with Different Strategies for High Deposition Wire Arc Additive Manufacturing of Mild Steel
- (2020) Eider Aldalur et al. Metals
- Effects of On-Line Vortex Cooling on the Microstructure and Mechanical Properties of Wire Arc Additively Manufactured Al-Mg Alloy
- (2020) Baoxing Wang et al. Metals
- Development of a High Strength Magnesium Alloy for Wire Arc Additive Manufacturing
- (2020) Stefan Gneiger et al. Metals
- Thermal Boundary Evolution of Molten Pool During Wire and Arc Additive Manufacturing of Single Walls of 5A06 Aluminum Alloy
- (2020) Haibin Geng et al. Metals
- Effects of Thermal Cycling on Wire and Arc Additive Manufacturing of Al-5356 Components
- (2020) Markus Köhler et al. Metals
- Monotonic and Fatigue Properties of Steel Material Manufactured by Wire Arc Additive Manufacturing
- (2020) Michael Wächter et al. Applied Sciences-Basel
- Microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy
- (2020) Zhijun Qiu et al. MATERIALS & DESIGN
- Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer
- (2020) Renan Medeiros Kindermann et al. MATERIALS & DESIGN
- Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing
- (2020) Hui Huang et al. Additive Manufacturing
- In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)
- (2020) Tiago A. Rodrigues et al. Additive Manufacturing
- Investigation on arc plasma, droplet, and molten pool behaviours in compulsively constricted WAAM
- (2020) Chuanbao Jia et al. Additive Manufacturing
- Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding
- (2020) Yangyang Guo et al. Journal of Magnesium and Alloys
- Influence of wire-arc additive manufacturing path planning strategy on the residual stress status in one single buildup layer
- (2020) Chi Zhang et al. The International Journal of Advanced Manufacturing Technology
- Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes
- (2020) José Luis Dávila et al. The International Journal of Advanced Manufacturing Technology
- WAAM system with interpass temperature control and forced cooling for near-net-shape printing of small metal components
- (2020) Nejc Kozamernik et al. The International Journal of Advanced Manufacturing Technology
- Wire and arc additive manufacturing of metal components: a review of recent research developments
- (2020) Jienan Liu et al. The International Journal of Advanced Manufacturing Technology
- Testing and initial verification of the world's first metal 3D printed bridge
- (2020) Leroy Gardner et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
- (2020) Chunyang Xia et al. JOURNAL OF MANUFACTURING SYSTEMS
- Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing
- (2020) Diego Raimundi Corradi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): microstructure and mechanical properties
- (2020) Qingkai Shen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A study on wire and arc additive manufacturing of low-carbon steel components: process stability, microstructural and mechanical properties
- (2020) Van Thao Le et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled Wire plus Arc Additively Manufactured Inconel 718 alloy after ageing treatment
- (2020) Jan Hönnige et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing
- (2020) Martin Bähr et al. OPTIMIZATION AND ENGINEERING
- Experimental investigation on improving the deposition rate of gas metal arc-based additive manufacturing by auxiliary wire feeding method
- (2020) Qinglin Han et al. Welding in the World
- Influence of arc energy and filler metal composition on the microstructure in wire arc additive manufacturing of duplex stainless steels
- (2020) Benjamin Wittig et al. Welding in the World
- On the use of gas-metal-arc-welding additive manufacturing for repurposing of low-carbon steel components: microstructures and mechanical properties
- (2020) Van Thao Le et al. Welding in the World
- Comparison of Mechanical Properties of Ni-Al-Bronze Alloy Fabricated through Wire Arc Additive Manufacturing with Ni-Al-Bronze Alloy Fabricated through Casting
- (2020) Jisun Kim et al. Metals
- Characterization of wire arc additive manufactured products: A comparison between as-deposited and inter-layer cold worked specimens
- (2020) Behzad Parvaresh et al. Journal of Manufacturing Processes
- Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study
- (2020) Chen Shen et al. Journal of Manufacturing Processes
- Model predictive control of layer width in wire arc additive manufacturing
- (2020) Chunyang Xia et al. Journal of Manufacturing Processes
- Fabrication of multi-element alloys by twin wire arc additive manufacturing combined with in-situ alloying
- (2020) Zhenwen Yang et al. Materials Research Letters
- Additive manufacturing method and different welding applications
- (2020) Elif Karayel et al. Journal of Materials Research and Technology-JMR&T
- Evaluation of Bead Geometry for Aluminum Parts Fabricated Using Additive Manufacturing-Based Wire-Arc Welding
- (2020) Hee-keun Lee et al. Processes
- Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling
- (2020) Lam Nguyen et al. Additive Manufacturing
- Continuous three-dimensional path planning (CTPP) for complex thin parts with wire arc additive manufacturing
- (2020) Adama Diourté et al. Additive Manufacturing
- Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications
- (2020) Z. Al-Nabulsi et al. CONSTRUCTION AND BUILDING MATERIALS
- Dramatic improvement of impact toughness for the fabricating of low-carbon steel components via submerged arc additive manufacturing
- (2020) Yuhang Li et al. MATERIALS LETTERS
- Herstellung von 3D‐gedruckten Stahlknoten
- (2020) Jean Pierre Bergmann et al. Stahlbau
- Novel Bionic Design Method for Skeleton Structures Based on Load Path Analysis
- (2020) Zhaohua Wang et al. Applied Sciences-Basel
- Current mode effects on weld bead geometry and heat affected zone in pulsed wire arc additive manufacturing of Ti-6-4 and Inconel 718
- (2020) Michalis Benakis et al. Journal of Manufacturing Processes
- 3D heat transfer, fluid flow and electromagnetic model for cold metal transfer wire arc additive manufacturing (Cmt-Waam)
- (2020) S. Cadiou et al. Additive Manufacturing
- Hot-wire arc additive manufacturing of aluminum alloy with reduced porosity and high deposition rate
- (2020) Rui Fu et al. MATERIALS & DESIGN
- Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process
- (2019) Arturo Gomez Ortega et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Forming Process, Microstructure, and Mechanical Properties of Thin-Walled 316L Stainless Steel Using Speed-Cold-Welding Additive Manufacturing
- (2019) Wei Wu et al. Metals
- Microstructure and Mechanical Properties of 9Cr Martensitic Heat-resistant Steel Fabricated by Wire and Arc Additive Manufacture Technology
- (2019) Chuang Gao et al. Materials Express
- Targeted influence on the weld strength of high-strength fine-grain structural steels in the GMA welding process through functionalized weld material surfaces
- (2019) T. Gehling et al. Welding in the World
- 3D-Drucken im Stahlbau mit dem automatisierten Wire Arc Additive Manufacturing
- (2019) Markus Feldmann et al. Stahlbau
- Functionally graded structures of refractory metals by wire arc additive manufacturing
- (2019) Gianrocco Marinelli et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing
- (2019) Jun Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation on forming–welding process chain for DC04 tube manufacturing using experiment and FEM simulation
- (2019) Alexander Bauer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ultrasonic Phased Array Inspection of Wire + Arc Additive Manufacture Samples Using Conventional and Total Focusing Method Imaging Approaches
- (2019) Y Javadi et al. INSIGHT
- On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing
- (2019) Alistair Ho et al. ACTA MATERIALIA
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon
- (2019) Yanhu Wang et al. APPLIED SURFACE SCIENCE
- Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy
- (2019) Romali Biswal et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture
- (2019) G. Marinelli et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing
- (2019) Jun Wang et al. MATERIALS LETTERS
- Effect of titanium powder on microstructure and mechanical properties of wire + arc additively manufactured Al-Mg alloy
- (2019) Liwei Wang et al. MATERIALS LETTERS
- Macrostructure and Mechanical Properties of Al – Si, Al – Mg – Si, and Al – Mg – Mn Aluminum Alloys Produced by Electric Arc Additive Growth
- (2019) O. V. Panchenko et al. METAL SCIENCE AND HEAT TREATMENT
- Harnessing the scientific synergy of welding and additive manufacturing
- (2019) H. L. Wei et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing
- (2019) Wang Yangfan et al. SURFACE & COATINGS TECHNOLOGY
- Wire-arc additive manufacturing of a duplex stainless steel: thermal cycle analysis and microstructure characterization
- (2019) Vahid A Hosseini et al. Welding in the World
- Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
- (2019) Tiago A. Rodrigues et al. Materials
- Additive Manufacturing of Complex Components through 3D Plasma Metal Deposition—A Simulative Approach
- (2019) Khaled Alaluss et al. Metals
- In Situ Production of Titanium Aluminides during Wire Arc Additive Manufacturing with Hot-Wire Assisted GMAW Process
- (2019) Philipp Henckell et al. Metals
- Wire and Arc Additive Manufacturing of Aluminum Components
- (2019) Köhler et al. Metals
- Correlation of Microstructure and Mechanical Properties of Metal Big Area Additive Manufacturing
- (2019) Benjamin Shassere et al. Applied Sciences-Basel
- Microstructure and mechanical properties of wire + arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated
- (2019) Zewu Qi et al. Journal of Manufacturing Processes
- A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model
- (2019) Santhan Reddy et al. Journal of Manufacturing Processes
- Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®
- (2019) G. Asala et al. CORROSION SCIENCE
- Analysis and constitutive modelling of high strain rate deformation behaviour of wire–arc additive-manufactured ATI 718Plus superalloy
- (2019) G. Asala et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat treatment effects on Inconel 625 components fabricated by wire + arc additive manufacturing (WAAM)—part 1: microstructural characterization
- (2019) A. N. M. Tanvir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire arc additive manufacturing of hot work tool steel with CMT process
- (2019) Y. Ali et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy
- (2019) Yangyang Guo et al. MATERIALS LETTERS
- Microstructural and Inclusion Characteristics of C–Mn Steel Welds at a Minimal Level of Titanium
- (2019) Kangmyung Seo et al. METALS AND MATERIALS INTERNATIONAL
- Mechanical properties of wire plus arc additive manufactured steel and stainless steel structures
- (2019) P. Moore et al. Welding in the World
- Multi-Material Design in Welding Arc Additive Manufacturing
- (2019) Kai Treutler et al. Metals
- CMT Additive Manufacturing of a High Strength Steel Alloy for Application in Crane Construction
- (2019) Josef Plangger et al. Metals
- Design and Parameter Identification of Wire and Arc Additively Manufactured (WAAM) Steel Bars for Use in Construction
- (2019) Johanna Müller et al. Metals
- Plasma Multiwire Technology with Alternating Wire Feed for Tailor-Made Material Properties in Wire and Arc Additive Manufacturing
- (2019) Uwe Reisgen et al. Metals
- Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic
- (2019) Jun Wang et al. Additive Manufacturing
- Introduction to the design rules for Metal Big Area Additive Manufacturing
- (2019) Clayton Greer et al. Additive Manufacturing
- Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties
- (2019) Tiago A. Rodrigues et al. Additive Manufacturing
- Residual stress in metal arc additive manufacturing of mill knives cutting edges
- (2019) A. C. Rusteiko et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components
- (2019) G. Marinelli et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Effect of Solidification Defects and HAZ Softening on the Anisotropic Mechanical Properties of a Wire Arc Additive-Manufactured Low-Carbon Low-Alloy Steel Part
- (2019) Mahya Ghaffari et al. JOM
- Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures
- (2019) M. Abbaszadeh et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacture
- (2019) G. Marinelli et al. JOURNAL OF NUCLEAR MATERIALS
- Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components
- (2019) Philip Dirisu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
- (2019) J.P. Oliveira et al. PROGRESS IN MATERIALS SCIENCE
- Shape-driven control of layer height in robotic wire and arc additive manufacturing
- (2019) Bohao Xu et al. RAPID PROTOTYPING JOURNAL
- Echtzeittemperaturmessung bei additivem Lichtbogenschweißen / Real-time temperature measurement at wire arc additive welding
- (2019) Andreas Richter et al. tm-Technisches Messen
- Integration of Forming Operations on Hybrid Additive Manufacturing Systems Based on Fusion Welding
- (2019) João P. M. Pragana et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Environmental Behavior of Low Carbon Steel Produced by a Wire Arc Additive Manufacturing Process
- (2019) Ron et al. Metals
- Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire + arc additive manufactured Ti-6Al-4V
- (2019) Romali Biswal et al. Additive Manufacturing
- Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2050 Al–Li Alloy Wall Deposits
- (2019) Hao Zhong et al. Chinese Journal of Mechanical Engineering
- Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing
- (2019) Mehran Rafieazad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-bead overlapping model with varying cross-section profile for robotic GMAW-based additive manufacturing
- (2019) Zeqi Hu et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Thin-walled metal deposition with GTAW welding-based additive manufacturing process
- (2019) Nitish P. Gokhale et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process
- (2019) Kun Liu et al. MATERIALS CHARACTERIZATION
- In-Situ Fabrication of Titanium Iron Intermetallic Compound by the Wire Arc Additive Manufacturing Process
- (2019) G. K. Sujan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- End lateral extension path strategy for intersection in wire and arc additive manufactured 2319 aluminum alloy
- (2019) Runsheng Li et al. RAPID PROTOTYPING JOURNAL
- Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)
- (2019) Qingfeng Yang et al. Materials
- Neutron diffraction residual stress determinations in Fe3Al based iron aluminide components fabricated using wire-arc additive manufacturing (WAAM)
- (2019) Chen Shen et al. Additive Manufacturing
- Ultrasonic phased array inspection of a Wire + Arc Additive Manufactured (WAAM) sample with intentionally embedded defects
- (2019) Yashar Javadi et al. Additive Manufacturing
- Optimization of parameters of micro-plasma transferred arc additive manufacturing process using real coded genetic algorithm
- (2019) Sagar H. Nikam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire plus arc additive manufactured functional steel surfaces enhanced by rolling
- (2019) Philip Dirisu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Heat transfer, fluid flow and electromagnetic model of droplets generation and melt pool behaviour for wire arc additive manufacturing
- (2019) S. Cadiou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Theoretical modeling and finite element simulation of dilution in micro-plasma transferred arc additive manufacturing of metallic materials
- (2019) Mayur S. Sawant et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental results for structural design of Wire-and-Arc Additive Manufactured stainless steel members
- (2019) Vittoria Laghi et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Passive vision measurement for robust reconstruction of molten pool in wire and arc additive manufacturing
- (2019) Jun Xiong et al. MEASUREMENT
- A modular path planning solution for Wire + Arc Additive Manufacturing
- (2019) Florent Michel et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Study on Microstructural and Mechanical Properties of an Al–Cu–Sn Alloy Wall Deposited by Double-Wire Arc Additive Manufacturing Process
- (2019) Shuai Wang et al. Materials
- Experimental Investigation of the Influence of Wire Arc Additive Manufacturing on the Machinability of Titanium Parts
- (2019) Unai Alonso et al. Metals
- Pore formation and evolution in wire + arc additively manufactured 2319 Al alloy
- (2019) Jianglong Gu et al. Additive Manufacturing
- Laser opto-ultrasonic dual detection for simultaneous compositional, structural, and stress analyses for wire + arc additive manufacturing
- (2019) Yuyang Ma et al. Additive Manufacturing
- Spectral diagnosis of wire arc additive manufacturing of Al alloys
- (2019) Chen Zhang et al. Additive Manufacturing
- Grain refinement in an unalloyed tantalum structure by combining Wire+Arc additive manufacturing and vertical cold rolling
- (2019) G. Marinelli et al. Additive Manufacturing
- Influences of postproduction heat treatment on Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process
- (2018) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layers
- (2018) Yongzhe Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts
- (2018) Fangda Xu et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing
- (2018) Xingwang Bai et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Trace Carbon Addition to Refine Microstructure and Enhance Properties of Additive-Manufactured Ti-6Al-4V
- (2018) S. Mereddy et al. JOM
- Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments
- (2018) M.J. Bermingham et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties
- (2018) Jinguo Ge et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing
- (2018) M.J. Bermingham et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing using WAAM with AA5183 wire
- (2018) A. Horgar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue crack growth anisotropy, texture and residual stress in austenitic steel made by wire and arc additive manufacturing
- (2018) J.V. Gordon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the toughness scatter in low alloy C-Mn steel samples fabricated using wire arc additive manufacturing
- (2018) Niyanth Sridharan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V
- (2018) Yong Xie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing
- (2018) Jayaprakash Sharma Panchagnula et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Numerical simulation of WAAM process by a GMAW weld pool model
- (2018) Y. Ogino et al. Welding in the World
- Influence of Shielding Gas Composition on Structure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625
- (2018) Ivan Jurić et al. JOM
- Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V
- (2018) Jian Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Properties of wire + arc additively manufactured 2024 aluminum alloy with different solution treatment temperature
- (2018) Zewu Qi et al. MATERIALS LETTERS
- Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour
- (2018) Jun Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- IMPROVED DYNAMIC IMPACT BEHAVIOUR OF WIRE-ARC ADDITIVE MANUFACTURED ATI 718PLUS
- (2018) G. Asala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Solution Treatment Temperatures on Microstructure and Mechanical Properties of TIG–MIG Hybrid Arc Additive Manufactured 5356 Aluminum Alloy
- (2018) Wei Zuo et al. METALS AND MATERIALS INTERNATIONAL
- Reducing Porosity and Refining Grains for Arc Additive Manufacturing Aluminum Alloy by Adjusting Arc Pulse Frequency and Current
- (2018) Donghai Wang et al. Materials
- Formation of SUS304/Aluminum Alloys Using Wire and Arc Additive Manufacturing
- (2018) Zhizhuang Hao et al. Metals
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- A spatial periodicity of microstructural evolution and anti-indentation properties of wire-arc additive manufacturing 2Cr13 thin-wall part
- (2018) Jinguo Ge et al. MATERIALS & DESIGN
- Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures
- (2018) Guocai Ma et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of Process Parameters on Mechanical Properties of Wire and Arc Additive-Manufactured AlCu6Mn
- (2018) Yazhou Zhang et al. JOM
- From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming
- (2018) A. Shirizly et al. JOM
- The Effects of Low Frequency on the Microstructure and Mechanical Properties of High-Strength Al-Mg Aluminum Alloys by Wire and Double-Pulsed Arc Additive Manufacturing
- (2018) Yuehai Feng et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Correlations between Microstructure Characteristics and Mechanical Properties in 5183 Aluminium Alloy Fabricated by Wire-Arc Additive Manufacturing with Different Arc Modes
- (2018) Xuewei Fang et al. Materials
- Thermo-Mechanical Modelling of Wire-Arc Additive Manufacturing (WAAM) of Semi-Finished Products
- (2018) Marcel Graf et al. Metals
- Residual Stress, Mechanical Properties, and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Wire and Arc Additive Manufacturing
- (2018) Yichong Yang et al. Metals
- Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision
- (2018) Zhuang Zhao et al. OPTIK
- Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal transfer modes in plasma Wire + Arc additive manufacture
- (2018) Sergio Ríos et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A Passive Imaging System for Geometry Measurement for the Plasma Arc Welding Process
- (2017) Tomas Font comas et al. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
- Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties
- (2017) X. Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Grain refinement of wire arc additively manufactured titanium by the addition of silicon
- (2017) S. Mereddy et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process
- (2017) Xiangfang Xu et al. MATERIALS CHARACTERIZATION
- Effect of CaF 2 addition on macro/microstructures and mechanical properties of wire and arc additive manufactured Ti-6Al-4V components
- (2017) Bo Yin et al. MATERIALS LETTERS
- Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing
- (2017) Xiaohui Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Analyses of ATI 718Plus® Produced by Wire-ARC Additive Manufacturing Process
- (2017) G. Asala et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process
- (2017) Bosheng Dong et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process
- (2017) A. Gomez Ortega et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
- (2017) Paul A. Colegrove et al. SCRIPTA MATERIALIA
- Evaluation of wire arc additive manufacturing for large-sized components in naval applications
- (2017) A. Queguineur et al. Welding in the World
- Material properties of CMT—metal additive manufactured duplex stainless steel blade-like geometries
- (2017) Gerhard Posch et al. Welding in the World
- Welding residual stresses in 960 MPa grade QT and TMCP high-strength steels
- (2017) Thomas Schaupp et al. Journal of Manufacturing Processes
- Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
- (2016) Donghong Ding et al. COMPUTER-AIDED DESIGN
- Fracture toughness and fatigue crack growth rate properties in wire + arc additive manufactured Ti-6Al-4V
- (2016) X Zhang et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process
- (2016) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel
- (2016) Fu Youheng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A wire deflection detection method based on image processing in wire + arc additive manufacturing
- (2016) Qiang Zhan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A comparative study of GMAW- and DE-GMAW-based additive manufacturing techniques: thermal behavior of the deposition process for thin-walled parts
- (2016) Dongqing Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing
- (2016) J. Y. Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing
- (2016) Suyog Jhavar et al. JOM
- Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts
- (2016) Haibin Geng et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Stress build-up in HSLA steel welds due to material behaviour
- (2016) Dirk Schroepfer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing
- (2016) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In-depth study of the mechanical properties for Fe 3 Al based iron aluminide fabricated using the wire-arc additive manufacturing process
- (2016) Chen Shen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components
- (2016) F. Martina et al. MATERIALS SCIENCE AND TECHNOLOGY
- Shaped metal deposition technique in additive manufacturing: A review
- (2016) Oguzhan Yilmaz et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Automatic multi-direction slicing algorithms for wire based additive manufacturing
- (2016) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- HAZ softening in Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds
- (2016) Lei Zhang et al. Welding in the World
- Engineering approach to assess residual stresses in welded components
- (2016) Dirk Schroepfer et al. Welding in the World
- Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing
- (2016) J.J. Lin et al. MATERIALS & DESIGN
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Real-time control of microstructure in laser additive manufacturing
- (2015) Mohammad H. Farshidianfar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A prediction model of layer geometrical size in wire and arc additive manufacture using response surface methodology
- (2015) Haibin Geng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire-feed additive manufacturing of metal components: technologies, developments and future interests
- (2015) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
- (2015) Filomeno Martina et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process
- (2015) Chen Shen et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- The present and future of additive manufacturing in the aerospace sector: A review of important aspects
- (2015) Adrián Uriondo et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING
- A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Formation of Mn-depleted zone in Ti-containing weld metals
- (2015) Kangmyung Seo et al. Welding in the World
- A tool-path generation strategy for wire and arc additive manufacturing
- (2014) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of titanium content on weld microstructure and mechanical properties of bainitic GMA welds
- (2014) Jun Seok Seo et al. Welding in the World
- A computationally efficient finite element model of wire and arc additive manufacture
- (2013) J. Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
- (2013) Jun Xiong et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
- (2012) Fude Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- Effect of Grain Boundary Ferrite on Susceptibility to Cold Cracking in High-strength Weld Metal
- (2008) Jun Seok Seo METALS AND MATERIALS INTERNATIONAL
- Shaped metal deposition of a nickel alloy for aero engine applications
- (2007) D. Clark et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started