Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts
Authors
Keywords
Direct metal deposition, Wire and arc additive manufacturing, Geometric features, Heat management, Distortion, Geometrical accuracy
Journal
MATERIALS & DESIGN
Volume -, Issue -, Pages 109471
Publisher
Elsevier BV
Online
2021-01-15
DOI
10.1016/j.matdes.2021.109471
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A path planning and sharp corner correction strategy for wire and arc additive manufacturing of solid components with polygonal cross-sections
- (2020) H. H. Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural Characteristics of Wire Arc Additive Manufacturing with Inconel 625 by Super-TIG Welding
- (2020) Muralimohan Cheepu et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Wire Arc Additive Manufacturing of Stainless Steels: A Review
- (2020) Wanwan Jin et al. Applied Sciences-Basel
- Wire and arc additive manufacturing of aluminum alloy lattice structure
- (2020) Yongjie Li et al. Journal of Manufacturing Processes
- Scaling Up metal additive manufacturing process to fabricate molds for composite manufacturing
- (2020) Ahmed Arabi Hassen et al. Additive Manufacturing
- A review of technological improvements in laser-based powder bed fusion of metal printers
- (2020) AmirMahyar Khorasani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Characterisation of a High-Performance Al–Zn–Mg–Cu Alloy Designed for Wire Arc Additive Manufacturing
- (2020) Paulo J. Morais et al. Materials
- Determination of the control points for circle and triangle route in wire arc additive manufacturing (WAAM)
- (2020) W. Ou et al. Journal of Manufacturing Processes
- Forming and mechanical properties of wire arc additive manufacture for marine propeller bracket
- (2020) Tianying He et al. Journal of Manufacturing Processes
- An experimental-numerical study of active cooling in wire arc additive manufacturing
- (2020) William Hackenhaar et al. Journal of Manufacturing Processes
- Fabrication of metallic parts with overhanging structures using the robotic wire arc additive manufacturing
- (2020) Lei Yuan et al. Journal of Manufacturing Processes
- Residual stresses in wire-arc additive manufacturing – Hierarchy of influential variables
- (2020) Q. Wu et al. Additive Manufacturing
- Thermal behaviors and fluid flow controlling the geometry of 7075 aluminum alloy single tracks during liquid metal flow rapid cooling additive manufacturing
- (2020) Ang Li et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Porous materials additively manufactured at low energy: Single-layer manufacturing and characterization
- (2020) Davoud Jafari et al. MATERIALS & DESIGN
- Processing parameters in laser powder bed fusion metal additive manufacturing
- (2020) J.P. Oliveira et al. MATERIALS & DESIGN
- In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)
- (2020) Tiago A. Rodrigues et al. Additive Manufacturing
- Concurrent geometry- and material-based process identification and optimization for robotic CMT-based wire arc additive manufacturing
- (2020) Thomas Lehmann et al. MATERIALS & DESIGN
- 3D heat transfer, fluid flow and electromagnetic model for cold metal transfer wire arc additive manufacturing (Cmt-Waam)
- (2020) S. Cadiou et al. Additive Manufacturing
- Forming Process, Microstructure, and Mechanical Properties of Thin-Walled 316L Stainless Steel Using Speed-Cold-Welding Additive Manufacturing
- (2019) Wei Wu et al. Metals
- Integrated WAAM-Subtractive Versus Pure Subtractive Manufacturing Approaches: An Energy Efficiency Comparison
- (2019) Gianni Campatelli et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Towards a multi-sensor monitoring methodology for AM metallic processes
- (2019) A. Chabot et al. Welding in the World
- CAM planning for multi-axis laser additive manufacturing considering collisions
- (2019) Denys Plakhotnik et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy
- (2019) Romali Biswal et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via wire + arc additive manufacture
- (2019) G. Marinelli et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts
- (2019) Rong Li et al. Journal of Manufacturing Processes
- A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model
- (2019) Santhan Reddy et al. Journal of Manufacturing Processes
- On-machine and in-process surface metrology for precision manufacturing
- (2019) W. Gao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Geometrical metrology for metal additive manufacturing
- (2019) R.K. Leach et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A sequential path-planning methodology for wire and arc additive manufacturing based on a water-pouring rule
- (2019) Xiaolong Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- CMT Additive Manufacturing of a High Strength Steel Alloy for Application in Crane Construction
- (2019) Josef Plangger et al. Metals
- Optimization of Process Parameters to Improve the Effective Area of Deposition in GMAW-Based Additive Manufacturing and its Mechanical and Microstructural Analysis
- (2019) Ali Waqas et al. Metals
- Introduction to the design rules for Metal Big Area Additive Manufacturing
- (2019) Clayton Greer et al. Additive Manufacturing
- Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM
- (2019) Chuanchu Su et al. APPLIED SURFACE SCIENCE
- Shape and Performance Controlled Advanced Design for Additive Manufacturing (ADfAM): A Review of Slicing and Path Planning
- (2019) Donghua Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
- (2019) J.P. Oliveira et al. PROGRESS IN MATERIALS SCIENCE
- Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing
- (2019) Qiuyu Miao et al. MATERIALS & DESIGN
- Layer geometry control for the fabrication of lattice structures by wire and arc additive manufacturing
- (2019) Takeyuki Abe et al. Additive Manufacturing
- High-accuracy and high-performance WAAM propeller manufacture by cylindrical surface slicing method
- (2019) Tianying He et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- T-GMAW based novel Multi-node trajectory planning for fabricating grid stiffened panels: An efficient production technology
- (2019) Junbiao Shi et al. JOURNAL OF CLEANER PRODUCTION
- Thin-walled metal deposition with GTAW welding-based additive manufacturing process
- (2019) Nitish P. Gokhale et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- End lateral extension path strategy for intersection in wire and arc additive manufactured 2319 aluminum alloy
- (2019) Runsheng Li et al. RAPID PROTOTYPING JOURNAL
- Residual stresses and distortion in the patterned printing of titanium and nickel alloys
- (2019) Qianru Wu et al. Additive Manufacturing
- Application of Multidirectional Robotic Wire Arc Additive Manufacturing Process for the Fabrication of Complex Metallic Parts
- (2019) Lei Yuan et al. IEEE Transactions on Industrial Informatics
- Wire plus arc additive manufactured functional steel surfaces enhanced by rolling
- (2019) Philip Dirisu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM
- (2019) Meng Guo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A modular path planning solution for Wire + Arc Additive Manufacturing
- (2019) Florent Michel et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
- (2019) János Plocher et al. MATERIALS & DESIGN
- Obtaining large-size pyramidal lattice cell structures by pulse wire arc additive manufacturing
- (2019) Tianqiu Xu et al. MATERIALS & DESIGN
- Process planning strategy for wire-arc additive manufacturing: Thermal behavior considerations
- (2019) Yun Zhao et al. Additive Manufacturing
- Investigation of humping phenomenon for the multi-directional robotic wire and arc additive manufacturing
- (2019) Lei Yuan et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Prediction of welding residual stresses using machine learning: Comparison between neural networks and neuro-fuzzy systems
- (2018) J. Mathew et al. APPLIED SOFT COMPUTING
- The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution
- (2018) Bintao Wu et al. CORROSION SCIENCE
- Wire and arc additive manufacture of high-building multi-directional pipe joint
- (2018) Dai Yili et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing
- (2018) Yangyang Lei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nonplanar slicing and path generation methods for robotic additive manufacturing
- (2018) Gang Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Adaptive process control of wire and arc additive manufacturing for fabricating complex-shaped components
- (2018) Fang Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layers
- (2018) Yongzhe Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of printable threshold overhang angle in extrusion-based additive manufacturing for reducing support waste
- (2018) Jingchao Jiang et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts
- (2018) Fangda Xu et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing
- (2018) Xingwang Bai et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Influence of the external magnetic field on fluid flow, temperature profile and humping bead in high speed gas metal arc welding
- (2018) Lin Wang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Preliminary Investigation of Building Strategies of Maraging Steel Bulk Material Using Wire + Arc Additive Manufacture
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing
- (2018) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy
- (2018) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of vibration and hot-wire gas tungsten arc (GTA) on the geometric shape
- (2018) Bishal Silwal et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of pulsed arc on the metal droplet deposited by projected transfer mode in wire-arc additive manufacturing
- (2018) Yi Luo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel
- (2018) Yuehai Feng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Oxide accumulation effects on wire + arc layer-by-layer additive manufacture process
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of shielding gas on the metal transfer and weld morphology in pulsed current MAG welding of carbon steel
- (2018) Yong Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- GMAW-based additive manufacturing of inclined multi-layer multi-bead parts with flat-position deposition
- (2018) Yongzhe Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Micro laser metal wire deposition for additive manufacturing of thin-walled structures
- (2018) Ali Gökhan Demir OPTICS AND LASERS IN ENGINEERING
- Formation and improvement of surface waviness for additive manufacturing 5A06 aluminium alloy component with GTAW system
- (2018) Haibin Geng et al. RAPID PROTOTYPING JOURNAL
- The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
- (2018) Davoud Jafari et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing
- (2018) Jayaprakash Sharma Panchagnula et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Numerical simulation of WAAM process by a GMAW weld pool model
- (2018) Y. Ogino et al. Welding in the World
- Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing
- (2018) Lei Ji et al. Materials
- Thermoelectric Cooling-Aided Bead Geometry Regulation in Wire and Arc-Based Additive Manufacturing of Thin-Walled Structures
- (2018) et al. Applied Sciences-Basel
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
- (2018) W. Ou et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319
- (2018) E.M. Ryan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures
- (2018) Guocai Ma et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of in-process active cooling on forming quality and efficiency of tandem GMAW–based additive manufacturing
- (2018) Junbiao Shi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming
- (2018) A. Shirizly et al. JOM
- Reducing arc heat input and obtaining equiaxed grains by hot-wire method during arc additive manufacturing titanium alloy
- (2018) Zixiang Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermo-Mechanical Modelling of Wire-Arc Additive Manufacturing (WAAM) of Semi-Finished Products
- (2018) Marcel Graf et al. Metals
- Wire-arc additive manufacturing H13 part: 3D pore distribution, microstructural evolution, and mechanical performances
- (2018) Jinguo Ge et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Molten pool stability of thin-wall parts in robotic GMA-based additive manufacturing with various position depositions
- (2018) Yanjiang Li et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties
- (2017) X. Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Understanding and overcoming of abnormity at start and end of the weld bead in additive manufacturing with GMAW
- (2017) Zeqi Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Understanding of humping formation and suppression mechanisms using the numerical simulation
- (2017) Dongsheng Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Microstructure evolution of Inconel 625 with 0.4 wt% boron modification during gas tungsten arc deposition
- (2017) Y. Tian et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Design for Wire + Arc Additive Manufacture: design rules and build orientation selection
- (2017) Helen Lockett et al. JOURNAL OF ENGINEERING DESIGN
- Additive Manufacturing of Metallic Materials: A Review
- (2017) Yi Zhang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel
- (2017) Youheng Fu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimization of wire feed for GTAW based additive manufacturing
- (2017) Haibin Geng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography
- (2017) Dongqing Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and property characteristics of thick Invar alloy plate joints using weave bead welding
- (2017) Xiaohong Zhan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition
- (2017) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V
- (2017) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Obtaining uniform deposition with variable wire feeding direction during wire-feed additive manufacturing
- (2017) Qianru Wu et al. MATERIALS AND MANUFACTURING PROCESSES
- Process planning for 8-axis robotized laser-based direct metal deposition system: A case on building revolved part
- (2017) Yaoyu Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- Additive Manufacturing of H11 with Wire-Based Laser Metal Deposition
- (2017) Stella Holzbach Oliari et al. Soldagem & Inspecao
- Porosity elimination and heat treatment of diode laser-clad homogeneous coating on cast aluminum-copper alloy
- (2017) Zhixiang Yang et al. SURFACE & COATINGS TECHNOLOGY
- Evaluation of wire arc additive manufacturing for large-sized components in naval applications
- (2017) A. Queguineur et al. Welding in the World
- Material properties of CMT—metal additive manufactured duplex stainless steel blade-like geometries
- (2017) Gerhard Posch et al. Welding in the World
- Environmental energy efficiency of single wire and tandem gas metal arc welding
- (2017) Gunther Sproesser et al. Welding in the World
- Obtaining fine microstructure and unsupported overhangs by low heat input pulse arc additive manufacturing
- (2017) Qianru Wu et al. Journal of Manufacturing Processes
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- Porosity testing methods for the quality assessment of selective laser melted parts
- (2016) Wessel W. Wits et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
- (2016) Mary Kathryn Thompson et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
- (2016) Donghong Ding et al. COMPUTER-AIDED DESIGN
- Fracture toughness and fatigue crack growth rate properties in wire + arc additive manufactured Ti-6Al-4V
- (2016) X Zhang et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Effects of malondialdehyde-induced protein modification on water functionality and physicochemical state of fish myofibrillar protein gel
- (2016) Lin Wang et al. FOOD RESEARCH INTERNATIONAL
- Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process
- (2016) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing
- (2016) M. A. Somashekara et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on the residual stress during selective laser melting (SLM) of metallic powder
- (2016) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Forming appearance control of arc striking and extinguishing area in multi-layer single-pass GMAW-based additive manufacturing
- (2016) Jun Xiong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
- (2016) Ross Cunningham et al. JOM
- Adaptive path planning for wire-feed additive manufacturing using medial axis transformation
- (2016) Donghong Ding et al. JOURNAL OF CLEANER PRODUCTION
- Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts
- (2016) Haibin Geng et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Analysis of additional electromagnetic force for mitigating the humping bead in high-speed gas metal arc welding
- (2016) Y. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing
- (2016) Dongqing Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing
- (2016) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Backward flowing molten metal in weld pool and its influence on humping bead in high-speed GMAW
- (2016) Lin Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys
- (2016) Jianglong Gu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
- (2016) J.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al–6.3Cu alloy
- (2016) Jianglong Gu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing
- (2016) Takeyuki Abe et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Shaped metal deposition technique in additive manufacturing: A review
- (2016) Oguzhan Yilmaz et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Automatic multi-direction slicing algorithms for wire based additive manufacturing
- (2016) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy
- (2016) Haibin Geng et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
- Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing
- (2015) Jun Xiong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive manufacturing using plasma transferred arc
- (2015) E. A. Alberti et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An improved slicing algorithm with efficient contour construction using STL files
- (2015) Zhengyan Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire-feed additive manufacturing of metal components: technologies, developments and future interests
- (2015) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical analysis of the coupled arc–weld pool–keyhole behaviors in stationary plasma arc welding
- (2015) Xiaoxia Jian et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
- (2015) J. Kranz et al. JOURNAL OF LASER APPLICATIONS
- Development of a laminar flow local shielding device for wire + arc additive manufacture
- (2015) J. Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
- (2015) Erik R. Denlinger et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
- (2015) Yan Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
- (2015) Filomeno Martina et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process
- (2015) Chen Shen et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Effect of weave frequency and amplitude on temperature field in weaving welding process
- (2014) Yuxi Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of the moving induction heating used as secondary heat source in weld-based additive manufacturing
- (2014) Xingwang Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy
- (2014) Baoqiang Cong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A tool-path generation strategy for wire and arc additive manufacturing
- (2014) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Studies on multipass welding with trailing heat sink considering phase transformation
- (2014) Shirish R. Kala et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of micro-plasma transferred arc (μ-PTA) wire deposition process for additive layer manufacturing applications
- (2014) Suyog Jhavar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High speed TIG–MAG hybrid arc welding of mild steel plate
- (2014) Xiangmeng Meng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments
- (2014) Rahul Unnikrishnan et al. MATERIALS CHARACTERIZATION
- Effect of external magnetic field on weld pool flow conditions in high-speed gas metal arc welding
- (2014) CS Wu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A computationally efficient finite element model of wire and arc additive manufacture
- (2013) J. Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging
- (2013) Xingwang Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of Interpass Idle Time on Thermal Stresses in Multipass Multilayer Weld-Based Rapid Prototyping
- (2013) Huihui Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
- (2013) Paul A. Colegrove et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adaptive control of deposited height in GMAW-based layer additive manufacturing
- (2013) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
- (2013) Fujia Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Numerical and Experimental Studies of the Influence of Process Gases in Tig Welding
- (2013) Julia Zähr et al. Welding in the World
- Study for TIG–MIG hybrid welding process
- (2013) Shuhei Kanemaru et al. Welding in the World
- An adaptive slicing algorithm and data format for functionally graded material objects
- (2012) Su Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Determination of equilibrium wire-feed-speeds for stable gas metal arc welding
- (2012) Z.H. Rao et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing
- (2012) Jun Xiong et al. JOURNAL OF CLEANER PRODUCTION
- Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis
- (2012) Jun Xiong et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V
- (2012) F. Martina et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
- (2012) Fude Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of geometrical features using wire and arc additive manufacture
- (2012) Panagiotis Kazanas et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Rapid manufacturing of metallic objects
- (2012) K.P. Karunakaran et al. RAPID PROTOTYPING JOURNAL
- Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing
- (2012) Jun Xiong et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- An adaptive process planning approach of rapid prototyping and manufacturing
- (2012) G.Q. Jin et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Study on the application for electromagnetic controlled molten pool welding process in overhead and flat position welding
- (2012) M Shoichi et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Weld bead modeling and process optimization in Hybrid Layered Manufacturing
- (2011) S. Suryakumar et al. COMPUTER-AIDED DESIGN
- Modeling the transient heat transfer for the controlled pulse key-holing process in plasma arc welding
- (2011) Junhua Sun et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
- (2011) Bernd Baufeld et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modeling and evaluation of curved layer fused deposition
- (2011) Sarat Singamneni et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints
- (2011) Subodh Kumar et al. MATERIALS & DESIGN
- A 3D dynamic analysis of thermal behavior during single-pass multi-layer weld-based rapid prototyping
- (2010) Huihui Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding
- (2010) C.G. Pickin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Low cost integration of additive and subtractive processes for hybrid layered manufacturing
- (2010) K.P. Karunakaran et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process
- (2010) Yong Cao et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Rolling to control residual stress and distortion in friction stir welds
- (2010) S. W. Wen et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Retrofitment of a CNC machine for hybrid layered manufacturing
- (2009) K. P. Karunakaran et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Process planning strategies for solid freeform fabrication of metal parts
- (2009) Lan Ren et al. JOURNAL OF MANUFACTURING SYSTEMS
- A computational investigation of the effectiveness of different shielding gas mixtures for arc welding
- (2009) A B Murphy et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Residual stress engineering in friction stir welds by roller tensioning
- (2009) J. Altenkirch et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Combined reparameterization-based spiral toolpath generation for five-axis sculptured surface machining
- (2008) Fei Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Offset Slices for Multidirection Layered Deposition
- (2008) Prabhjot Singh et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al–Cu alloys
- (2008) Alexandre P. Boeira et al. MATERIALS & DESIGN
- The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel
- (2008) H.T. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties
- (2008) Sui Him Mok et al. SURFACE & COATINGS TECHNOLOGY
- Shaped metal deposition of a nickel alloy for aero engine applications
- (2007) D. Clark et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search