Correlation of Materials Property and Performance with Internal Structures Evolvement Revealed by Laboratory X-ray Tomography

Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting

(2018) S. Zhao et al.   ACTA MATERIALIA

Recovery of tensile properties of twinning-induced plasticity steel via electropulsing induced void healing

(2018) C.L. Yang et al.   SCRIPTA MATERIALIA

Morphological evolution and internal strain mapping of pomelo peel using X-ray computed tomography and digital volume correlation

(2018) B. Wang et al.   MATERIALS & DESIGN

The imaging of failure in structural materials by synchrotron radiation X-ray microtomography

(2017) S.C. Wu et al.   ENGINEERING FRACTURE MECHANICS

In-Situ CT Damage Analysis of Metal Inserts Embedded in Carbon Fiber-Reinforced Plastics

(2017) F. Pottmeyer et al.   EXPERIMENTAL MECHANICS

Gradual shear band cracking and apparent softening of metallic glass under low temperature compression

(2017) S.J. Wu et al.   INTERMETALLICS

In Situ X-ray Microtomography of Stress Corrosion Cracking and Corrosion Fatigue in Aluminum Alloys

(2017) Sudhanshu S. Singh et al.   JOM

Time-lapse lab-based x-ray nano-CT study of corrosion damage

(2017) R.S. BRADLEY et al.   JOURNAL OF MICROSCOPY

X-ray micro computed tomography characterization of cellular SiC foams for their applications in chemical engineering

(2017) Xiaoxia Ou et al.   MATERIALS CHARACTERIZATION

Deformation behaviour of in-situ TiB 2 reinforced A357 aluminium alloy composite foams under compressive and impact loading

(2017) U. Athul Atturan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Temperature effect of elastic anisotropy and internal strain development in advanced nanostructured alloys: An in-situ synchrotron X-ray investigation

(2017) Yingye Gan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science

(2017) Julie Villanova et al.   Materials Today

From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample

(2017) D. Tourret et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Evolution of Micro-Pores in a Single-Crystal Nickel-Based Superalloy During Solution Heat Treatment

(2017) Xiangwei Li et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Developments on a SEM-based X-ray tomography system: Stabilization scheme and performance evaluation

(2017) L. A. Gomes Perini et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Revealing the shear band cracking mechanism in metallic glass by X-ray tomography

(2017) R.T. Qu et al.   SCRIPTA MATERIALIA

Damage tolerance of nuclear graphite at elevated temperatures

(2017) Dong Liu et al.   Nature Communications

The index of dispersion as a metric of quanta – unravelling the Fano factor

(2017) Wilfred K. Fullagar et al.   Acta Crystallographica Section B-Structural Science Crystal Engineering and Materials

Early commissioning results for spectroscopic X-ray Nano-Imaging Beamline BL 7C sXNI at PLS-II

(2017) Sangsul Lee et al.   JOURNAL OF SYNCHROTRON RADIATION

Development of synchrotron X-ray micro-tomography under extreme conditions of pressure and temperature

(2017) M. Álvarez-Murga et al.   JOURNAL OF SYNCHROTRON RADIATION

Two-scale study of the fracture of an aluminum foam by X-ray tomography and finite element modeling

(2017) Clémence Petit et al.   MATERIALS & DESIGN

Compressive properties of functionally graded lattice structures manufactured by selective laser melting

(2017) Sing Ying Choy et al.   MATERIALS & DESIGN

Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction

(2017) Sakkadech Limmahakhun et al.   MATERIALS & DESIGN

Elemental Contrast X-ray Tomography Using Ross Filter Pairs with a Polychromatic Laboratory Source

(2017) Benedicta D. Arhatari et al.   Scientific Reports

50-nm-resolution full-field X-ray microscope without chromatic aberration using total-reflection imaging mirrors

(2017) Satoshi Matsuyama et al.   Scientific Reports

Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)

(2017) S. A. McDonald et al.   Scientific Reports

Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys

(2016) F. Hannard et al.   ACTA MATERIALIA

4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification

(2016) B. Cai et al.   ACTA MATERIALIA

3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li-S Batteries

(2016) Ruopian Fang et al.   ADVANCED MATERIALS

Full-field x ray nano-imaging system designed and constructed at SSRF

(2016) Binggang Feng Binggang Feng et al.   Chinese Optics Letters

Switching between solid solution and two-phase regimes in the Li 1-x Fe 1-y Mn y PO 4 cathode materials during lithium (de)insertion: combined PITT, in situ XRPD and electron diffraction tomography study

(2016) Oleg A. Drozhzhin et al.   ELECTROCHIMICA ACTA

In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale

(2016) B. M. Patterson et al.   EXPERIMENTAL MECHANICS

Fabrication and Evaluation of a Bioactive Sr–Ca–P Contained Micro-Arc Oxidation Coating on Magnesium Strontium Alloy for Bone Repair Application

(2016) Junjie Han et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

In situ synchrotron tensile investigations on 14YWT, MA957, and 9-Cr ODS alloys

(2016) Jun-Li Lin et al.   JOURNAL OF NUCLEAR MATERIALS

Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling

(2016) Benoit Revil-Baudard et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Correlative multiscale tomography of biological materials

(2016) Robert S. Bradley et al.   MRS BULLETIN

Fast 3D reconstruction method for differential phase contrast X-ray CT

(2016) Michael T. McCann et al.   OPTICS EXPRESS

Soft Route to 4D Tomography

(2016) Thibault Taillandier-Thomas et al.   PHYSICAL REVIEW LETTERS

Three-dimensional displacement mapping of diffused Pt thermal barrier coatings via synchrotron X-ray computed tomography and digital volume correlation

(2016) D. Khoshkhou et al.   SCRIPTA MATERIALIA

Large volume serial section tomography by Xe Plasma FIB dual beam microscopy

(2016) T.L. Burnett et al.   ULTRAMICROSCOPY

In-situ measurements of fracture toughness properties in composite laminates

(2016) Yuri Nikishkov et al.   MATERIALS & DESIGN

Tensile fracture of metallic glasses via shear band cavitation

(2015) Jian Luo et al.   ACTA MATERIALIA

Long range stress fields and cavitation along a shear band in a metallic glass: The local origin of fracture

(2015) R. Maaß et al.   ACTA MATERIALIA

Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation

(2015) M. Mostafavi et al.   ACTA MATERIALIA

Functionally Graded Ti-6Al-4V Meshes with High Strength and Energy Absorption

(2015) Shujun Li et al.   ADVANCED ENGINEERING MATERIALS

3D Graphene-Foam-Reduced-Graphene-Oxide Hybrid Nested Hierarchical Networks for High-Performance Li-S Batteries

(2015) Guangjian Hu et al.   ADVANCED MATERIALS

Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour

(2015) S.D. Zhang et al.   CORROSION SCIENCE

Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography

(2015) Joël Lachambre et al.   INTERNATIONAL JOURNAL OF FATIGUE

Evolution of shear bands into cracks in metallic glasses

(2015) Yuan-Yun Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials

(2015) Brian M. Patterson et al.   JOURNAL OF MATERIALS SCIENCE

Effects of Sintering Method and Sintering Temperature on the Microstructure and Properties of Porous Y2SiO5

(2015) Zhen Wu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure evolution in metals induced by high density electric current pulses

(2015) J. D. Guo et al.   MATERIALS SCIENCE AND TECHNOLOGY

X-ray micro-beam techniques and phase contrast tomography applied to biomaterials

(2015) Michela Fratini et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

3D chemical imaging in the laboratory by hyperspectral X-ray computed tomography

(2015) C. K. Egan et al.   Scientific Reports

Degradation of Li/S Battery Electrodes On 3D Current Collectors Studied Using X-ray Phase Contrast Tomography

(2015) L. Zielke et al.   Scientific Reports

A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries

(2015) Guangmin Zhou et al.   Nano Energy

Remelting and solidification of a 6082 Al alloy containing submicron yttria particles: 4D experimental study by in situ X-ray microtomography

(2015) R. Daudin et al.   MATERIALS & DESIGN

APPLICATION OF HIGH RESOLUTION TRANSMISSIONX-RAY TOMOGRAPHY IN MATERIAL SCIENCE

(2015) Shaogang WANG et al.   ACTA METALLURGICA SINICA

Full-Field Synchrotron Tomography of Nongraphitic Foam and Laminate Anodes for Lithium-Ion Batteries

(2014) Fikile R. Brushett et al.   ACS Applied Materials & Interfaces

Hot-pressure sintering of low-density snow analyzed by X-ray microtomography and in situ microcompression

(2014) Stefan Schleef et al.   ACTA MATERIALIA

A Flexible Sulfur-Graphene-Polypropylene Separator Integrated Electrode for Advanced Li-S Batteries

(2014) Guangmin Zhou et al.   ADVANCED MATERIALS

Direct experimental evidence of nano-voids formation and coalescence within shear bands

(2014) Yang Shao et al.   APPLIED PHYSICS LETTERS

Projection Savings in CT-based Digital Volume Correlation

(2014) H. Leclerc et al.   EXPERIMENTAL MECHANICS

Laboratory micro- and nanoscale X-ray tomographic investigation of Al–7 at.%Cu solidification structures

(2014) B.M. Patterson et al.   MATERIALS CHARACTERIZATION

Damage characterisation in aluminium matrix composites reinforced with amorphous metal inclusions

(2014) A. Ferre et al.   MATERIALS SCIENCE AND TECHNOLOGY

Serial sectioning methods for 3D investigations in materials science

(2014) Armin Zankel et al.   MICRON

Morphological and Performance Measures of Polyurethane Foams Using X-Ray CT and Mechanical Testing

(2014) Brian M. Patterson et al.   MICROSCOPY AND MICROANALYSIS

A Graphene-Pure-Sulfur Sandwich Structure for Ultrafast, Long-Life Lithium-Sulfur Batteries

(2013) Guangmin Zhou et al.   ADVANCED MATERIALS

In situ observations of fractures in short carbon fiber/epoxy composites

(2013) Xiaofang Hu et al.   CARBON

Quantitative X-ray tomography

(2013) E. Maire et al.   INTERNATIONAL MATERIALS REVIEWS

First laboratory X-ray diffraction contrast tomography for grain mapping of polycrystals

(2013) A. King et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Cellular solids studied by x-ray tomography and finite element modeling – a review

(2013) Clémence Petit et al.   JOURNAL OF MATERIALS RESEARCH

Strengthening and toughening of Mg-based bulk metallic glass via in-situ formed B2-type AgMg phase

(2013) Shao-Gang Wang et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Effects of Inhomogeneities—Nanoscale to Mesoscale—on the Durability of Li-Ion Batteries

(2013) Stephen J. Harris et al.   Journal of Physical Chemistry C

Mechanical behaviour of hollow-tube stackings: Experimental characterization and modelling of the role of their constitutive material behaviour

(2012) V. Marcadon et al.   ACTA MATERIALIA

A laboratory system for element specific hyperspectral X-ray imaging

(2012) Simon D. M. Jacques et al.   ANALYST

Three-Dimensional Architecture of Engineering Multiphase Metals

(2012) Guillermo Requena et al.   Annual Review of Materials Research

X-Ray Tomography Applied to the Characterization of Highly Porous Materials

(2012) Eric Maire   Annual Review of Materials Research

Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

(2012) Philip J. Withers et al.   Annual Review of Materials Research

Measurement of Interfacial Evolution in Three Dimensions

(2012) D.J. Rowenhorst et al.   Annual Review of Materials Research

Electron Tomography in the (S)TEM: From Nanoscale Morphological Analysis to 3D Atomic Imaging

(2012) Zineb Saghi et al.   Annual Review of Materials Research

Cast defects induced sample-size dependency on compressive strength and fracture toughness of Mg–Cu–Ag–Gd bulk metallic glass

(2012) Shao-Gang Wang et al.   INTERMETALLICS

An introduction to three-dimensional X-ray diffraction microscopy

(2012) Henning Friis Poulsen   JOURNAL OF APPLIED CRYSTALLOGRAPHY

In Operando X-ray Diffraction and Transmission X-ray Microscopy of Lithium Sulfur Batteries

(2012) Johanna Nelson et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting

(2011) S.J. Li et al.   ACTA MATERIALIA

3D imaging in material science: Application of X-ray tomography

(2011) Luc Salvo et al.   COMPTES RENDUS PHYSIQUE

Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography

(2011) Eric Maire et al.   ENGINEERING FRACTURE MECHANICS

Three-dimensional strain mapping using in situ X-ray synchrotron microtomography

(2011) H Toda et al.   JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN

Three-dimensional imaging of chemical phase transformations at the nanoscale with full-field transmission X-ray microscopy

(2011) Florian Meirer et al.   JOURNAL OF SYNCHROTRON RADIATION

Strain rate dependent compression response of Ni-foam investigated by experimental and FEM simulation methods

(2011) N. Michailidis   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy

(2010) X.N. Gu et al.   Acta Biomaterialia

Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading

(2010) N. Michailidis et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics

(2010) J. -Y. Buffiere et al.   EXPERIMENTAL MECHANICS

Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques

(2010) W. Ludwig et al.   JOM

Phase-contrast X-ray tomography: Contrast mechanism and roles of phase retrieval

(2008) Xizeng Wu et al.   EUROPEAN JOURNAL OF RADIOLOGY

Small scale mechanical properties of polycrystalline materials: in situ diffraction studies

(2008) B. Girault et al.   International Journal of Nanotechnology

Recent advances in X-ray microtomography applied to materials

(2008) S. R. Stock   INTERNATIONAL MATERIALS REVIEWS

X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. I. Direct beam case

(2008) Wolfgang Ludwig et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys

(2008) A.B. Phillion et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison between X-ray micro-computed tomography and optical scanning tomography for full 3D strain measurement by digital volume correlation

(2008) Arnaud Germaneau et al.   NDT & E INTERNATIONAL

The use and characterization of a backilluminated charge-coupled device in investigations of pulsed x-ray and radiation sources

(2008) Wilfred Fullagar et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Deformation behaviour of elastomeric matrix composites under static loading conditions

(2007) E. Bayraktar et al.   ENGINEERING FRACTURE MECHANICS

An improved algorithm for beam-hardening corrections in experimental X-ray tomography

(2007) V.S.V.M. Vedula et al.   NDT & E INTERNATIONAL