From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Published 2017 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Authors
Keywords
-
Journal
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume 48, Issue 11, Pages 5529-5546
Publisher
Springer Nature
Online
2017-09-13
DOI
10.1007/s11661-017-4302-8
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project
- (2017) G. Zimmermann et al. JOM
- Instantiation of crystal plasticity simulations for micromechanical modelling with direct input from microstructural data collected at light sources
- (2017) Reeju Pokharel et al. SCRIPTA MATERIALIA
- Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys
- (2016) Sansan Shuai et al. ACTA MATERIALIA
- Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy
- (2016) B. Cai et al. ACTA MATERIALIA
- Three-dimensional dendritic needle network model for alloy solidification
- (2016) D. Tourret et al. ACTA MATERIALIA
- Microstructural effects on damage evolution in shocked copper polycrystals
- (2016) Evan J. Lieberman et al. ACTA MATERIALIA
- 4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification
- (2016) B. Cai et al. ACTA MATERIALIA
- Atomistic to continuum modeling of solidification microstructures
- (2016) Alain Karma et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Modeling and characterization of grain structures and defects in solidification
- (2016) M. Rappaz CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- 20 Hz X-ray tomography during an in situ tensile test
- (2016) Eric Maire et al. INTERNATIONAL JOURNAL OF FRACTURE
- Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation
- (2016) Takao Koshikawa et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- X-ray Imaging and Controlled Solidification of Al-Cu Alloys Toward Microstructures by Design
- (2015) Amy J. Clarke et al. ADVANCED ENGINEERING MATERIALS
- An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals
- (2015) L. Chen et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu
- (2015) Reeju Pokharel et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Three-Dimensional Multiscale Modeling of Dendritic Spacing Selection During Al-Si Directional Solidification
- (2015) Damien Tourret et al. JOM
- In Situ X-Ray Observations of Dendritic Fragmentation During Directional Solidification of a Sn-Bi Alloy
- (2015) John W. Gibbs et al. JOM
- Calculation of grain boundary normals directly from 3D microstructure images
- (2015) E J Lieberman et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Transgranular liquation cracking of grains in the semi-solid state
- (2015) S. Karagadde et al. Nature Communications
- The Three-Dimensional Morphology of Growing Dendrites
- (2015) J. W. Gibbs et al. Scientific Reports
- 3-D microstructural model of freckle formation validated using in situ experiments
- (2014) S. Karagadde et al. ACTA MATERIALIA
- In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
- (2014) C. Puncreobutr et al. ACTA MATERIALIA
- In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy
- (2014) B. Cai et al. ACTA MATERIALIA
- Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification
- (2014) C. S. Tiwary et al. JOURNAL OF APPLIED PHYSICS
- Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
- (2014) Taek Bo Kim et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ microtensile testing and X-ray microtomography-based finite element modelling of open-cell metal foam struts and sandwich panels
- (2014) Charles Betts et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Laboratory micro- and nanoscale X-ray tomographic investigation of Al–7 at.%Cu solidification structures
- (2014) B.M. Patterson et al. MATERIALS CHARACTERIZATION
- Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations
- (2014) Reeju Pokharel et al. Annual Review of Condensed Matter Physics
- Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography
- (2014) K. M. Kareh et al. Nature Communications
- Multiscale dendritic needle network model of alloy solidification
- (2013) D. Tourret et al. ACTA MATERIALIA
- 3-D granular modeling and in situ X-ray tomographic imaging: A comparative study of hot tearing formation and semi-solid deformation in Al–Cu alloys
- (2013) M. Sistaninia et al. ACTA MATERIALIA
- Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium–silicon–copper alloys
- (2013) C. Puncreobutr et al. ACTA MATERIALIA
- Local Tomography Study of the Fracture of an ERG Metal Foam
- (2013) Tao Zhang et al. ADVANCED ENGINEERING MATERIALS
- Synchrotron X-ray imaging for crystal growth studies
- (2013) José Baruchel et al. COMPTES RENDUS PHYSIQUE
- Quantitative X-ray tomography
- (2013) E. Maire et al. INTERNATIONAL MATERIALS REVIEWS
- On the interest of synchrotron X-ray imaging for the study of solidification in metallic alloys
- (2012) Henri Nguyen-Thi et al. COMPTES RENDUS PHYSIQUE
- Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
- (2012) Michel Suéry et al. JOM
- Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling
- (2012) S. Thuillier et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification
- (2012) Chedtha Puncreobutr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Structural, elastic and electronic properties of θ (Al2Cu) and S (Al2CuMg) strengthening precipitates in Al–Cu–Mg series alloys: First-principles calculations
- (2012) J. Zhang et al. SOLID STATE COMMUNICATIONS
- Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification
- (2011) A. Bogno et al. ACTA MATERIALIA
- 3D imaging in material science: Application of X-ray tomography
- (2011) Luc Salvo et al. COMPTES RENDUS PHYSIQUE
- Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
- (2011) Eric Maire et al. ENGINEERING FRACTURE MECHANICS
- An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
- (2011) Ricardo A. Lebensohn et al. INTERNATIONAL JOURNAL OF PLASTICITY
- High-energy diffraction microscopy at the advanced photon source
- (2011) U. Lienert et al. JOM
- Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
- (2011) J V Bernier et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
- (2011) Jette Oddershede et al. MATERIALS CHARACTERIZATION
- In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
- (2010) J. -Y. Buffiere et al. EXPERIMENTAL MECHANICS
- In situ analysis of the influence of convection during the initial transient of planar solidification
- (2010) A. Bogno et al. JOURNAL OF CRYSTAL GROWTH
- In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al–10wt.% Cu alloy
- (2009) N. Limodin et al. ACTA MATERIALIA
- Three dimensional experimental and numerical multiscale analysis of a fatigue crack
- (2009) Johann Rannou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Micro- and nanoscale tensile testing of materials
- (2009) D. S. Gianola et al. JOM
- Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
- (2009) Y.H. Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micro-compression testing: A critical discussion of experimental constraints
- (2009) D. Kiener et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
- (2009) S. Terzi et al. SCRIPTA MATERIALIA
- Solidification microstructures and solid-state parallels: Recent developments, future directions
- (2008) M. Asta et al. ACTA MATERIALIA
- Recent advances in X-ray microtomography applied to materials
- (2008) S. R. Stock INTERNATIONAL MATERIALS REVIEWS
- X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
- (2008) Greg Johnson et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography
- (2008) A.B. Phillion et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In-Situ and Real-Time Analysis of the Formation of Strains and Microstructure Defects during Solidification of Al-3.5 Wt Pct Ni Alloys
- (2008) G. Reinhart et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now