In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale

Correlative multiscale tomography of biological materials

(2016) Robert S. Bradley et al.   MRS BULLETIN

Large volume serial section tomography by Xe Plasma FIB dual beam microscopy

(2016) T.L. Burnett et al.   ULTRAMICROSCOPY

Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation

(2015) M. Mostafavi et al.   ACTA MATERIALIA

X-ray Imaging and Controlled Solidification of Al-Cu Alloys Toward Microstructures by Design

(2015) Amy J. Clarke et al.   ADVANCED ENGINEERING MATERIALS

2D and 3D imaging of fatigue failure mechanisms of 3D woven composites

(2015) B. Yu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials

(2015) Brian M. Patterson et al.   JOURNAL OF MATERIALS SCIENCE

A review of the mechanical properties of beetle elytra and development of the biomimetic honeycomb plates

(2015) Chenglin He et al.   JOURNAL OF SANDWICH STRUCTURES & MATERIALS

Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy

(2015) P. J. Withers   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Internal Deformation Measurement of Polymer Bonded Sugar in Compression by Digital Volume Correlation of In-situ Tomography

(2014) Z. Hu et al.   EXPERIMENTAL MECHANICS

Laboratory micro- and nanoscale X-ray tomographic investigation of Al–7 at.%Cu solidification structures

(2014) B.M. Patterson et al.   MATERIALS CHARACTERIZATION

Non-destructive elemental quantification of polymer-embedded thin films using laboratory based X-ray techniques

(2014) Nikolaus L. Cordes et al.   SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY

In SituInvestigation of High Humidity Stress Corrosion Cracking of 7075 Aluminum Alloy by Three-Dimensional (3D) X-ray Synchrotron Tomography

(2014) S. S. Singh et al.   Materials Research Letters

Quantitative X-ray tomography

(2013) E. Maire et al.   INTERNATIONAL MATERIALS REVIEWS

Comparison of the Mechanical Behaviour of Standard and Auxetic Foams by X-ray Computed Tomography and Digital Volume Correlation

(2013) F. Pierron et al.   STRAIN

Proton Radiography Peers into Metal Solidification

(2013) Amy Clarke et al.   Scientific Reports

Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

(2012) Philip J. Withers et al.   Annual Review of Materials Research

Structural design inspired by beetle elytra and its mechanical properties

(2012) Ce Guo et al.   CHINESE SCIENCE BULLETIN

Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation

(2012) F. Di Gioacchino et al.   EXPERIMENTAL MECHANICS

Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys

(2012) C. Puncreobutr et al.   JOM

Measure of morphological and performance properties in polymeric silicone foams by X-ray tomography

(2012) Brian M. Patterson et al.   JOURNAL OF MATERIALS SCIENCE

Tooth periodontal ligament: Direct 3D microCT visualization of the collagen network and how the network changes when the tooth is loaded

(2012) Gili R.S. Naveh et al.   JOURNAL OF STRUCTURAL BIOLOGY

Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode

(2012) P. R. Shearing et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Dimensional Quantification of Embedded Voids or Objects in Three Dimensions Using X-Ray Tomography

(2012) Brian M. Patterson et al.   MICROSCOPY AND MICROANALYSIS

Imaging cracks in hostile regimes

(2012) Philip J. Withers   NATURE MATERIALS

Resolving the Three-Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer-Scale X-ray Computed Tomography

(2011) William K. Epting et al.   ADVANCED FUNCTIONAL MATERIALS

Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature

(2011) P. R. Shearing et al.   ELECTROCHEMICAL AND SOLID STATE LETTERS

Morphology and mechanical properties of Cybister elytra

(2010) ZhiXian Yang et al.   CHINESE SCIENCE BULLETIN

In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics

(2010) J. -Y. Buffiere et al.   EXPERIMENTAL MECHANICS

Characterization of commercial rigid polyurethane foams used as bone analogs for implant testing

(2010) Kayla L. Calvert et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

X-ray nano computerised tomography of SOFC electrodes using a focused ion beam sample-preparation technique

(2010) P.R. Shearing et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

The Effects of TATB Ratchet Growth on PBX 9502

(2010) Darla G. Thompson et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams

(2009) Jicheng Gong et al.   ACTA MATERIALIA

3D variations in human crown dentin tubule orientation: A phase-contrast microtomography study

(2009) Paul Zaslansky et al.   DENTAL MATERIALS

Recent advances in X-ray microtomography applied to materials

(2008) S. R. Stock   INTERNATIONAL MATERIALS REVIEWS

Size effect on strength and strain hardening of small-scale [111] nickel compression pillars

(2008) C.P. Frick et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Measurement of the Poisson’s ratio of flexible polyurethane foam and its influence on a uniaxial compression model

(2007) R.D. Widdle et al.   INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE