The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes
Authors
Keywords
Metal cutting, Microstructure evolution, Microstructure features, Numerical modeling, Characterization
Journal
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 177, Issue -, Pages 103890
Publisher
Elsevier BV
Online
2022-05-02
DOI
10.1016/j.ijmachtools.2022.103890
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress
- (2022) Wenyu Cheng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present
- (2022) Shreyes Melkote et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi
- (2021) Won Seok Choi et al. ACTA MATERIALIA
- A crystal plasticity finite element-based approach to model the constitutive behavior of multi-phase steels
- (2021) Hongguang Liu et al. Archives of Civil and Mechanical Engineering
- Fragmented chip formation mechanism in high-speed cutting from the perspective of stress wave effect
- (2021) Jun Zhang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity in metal machining - Part II: Functional performance
- (2021) Andrea la Monaca et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V
- (2021) A. Sela et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Serrated Chip Formation Induced Periodic Distribution of Morphological and Physical Characteristics in Machined Surface During High-Speed Machining of Ti6Al4V
- (2021) Binbin Xu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Influence of cutting velocity on gradient microstructure of machined surface during turning of high-strength alloy steel
- (2021) Hongwan Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The development of FEM based model of orthogonal cutting for pure iron
- (2021) Jinxing Kong et al. Journal of Manufacturing Processes
- Revealing Nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy
- (2021) Dongdong Xu et al. ACTA MATERIALIA
- A Godunov ‐type discrete element model for elastic‐viscoplastic continuum impact problems
- (2021) Zhechao Liu et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
- (2021) Bing Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress
- (2021) Xiang Xu et al. SIMULATION MODELLING PRACTICE AND THEORY
- Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes
- (2021) Andrés Sela et al. Metals
- Whole process analysis of microstructure evolution during chip formation of high-speed machining OFHC copper
- (2021) Hongguang Liu et al. Journal of Manufacturing Processes
- A modified constitutive model coupled with microstructure evolution incremental model for machining of titanium alloy Ti–6Al–4V
- (2021) Guangxin Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermomechanical modeling of crystallographic anisotropy effect on machining forces based on crystal plasticity framework
- (2021) Houssem Ben Boubaker et al. MACHINING SCIENCE AND TECHNOLOGY
- A new damage evolution criterion for the coupled Eulerian-Lagrangian approach: Application to three-dimensional numerical simulation of segmented chip formation mechanisms in orthogonal cutting
- (2021) D. Ambrosio et al. Journal of Manufacturing Processes
- Geometry-considered 3D pseudorandom grain-scale modelling for crystalline material miniature parts
- (2021) Hansong Ji et al. MATERIALS & DESIGN
- Microhardness model based on geometrically necessary dislocations for heterogeneous material
- (2021) Mohammed Mendas et al. Journal of Materials Research and Technology-JMR&T
- Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
- (2020) Mathias Agmell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Chip Formation and Phase Transformation in Orthogonal Machining of NiTi Shape Memory Alloy: Microstructure-based Modelling and Experimental Validation
- (2020) Yusuf Kaynak et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
- (2020) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A digital approach to automatically assess the machining-induced microstructural surface integrity
- (2020) Andrea la Monaca et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A Comparative Investigation Between Transmission Kikuchi Diffraction (TKD) and Precession Electron Diffraction (PED)
- (2020) Glenn Sneddon et al. MICROSCOPY AND MICROANALYSIS
- Simulation of machining of ductile polycrystalline aggregates using a remeshing framework
- (2020) A.S. Vandana et al. Journal of Manufacturing Processes
- Numerical simulation of tool wear in drilling Inconel 718 under flood and cryogenic cooling conditions
- (2020) A. Attanasio et al. WEAR
- Modelling the effects of twinning and dislocation induced strengthening in orthogonal micro and macro cutting of commercially pure titanium
- (2020) Sergio Rinaldi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining
- (2020) Xiang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
- (2020) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper
- (2019) Zhanfeng Wang et al. Journal of Manufacturing Processes
- Microstructure based flow stress model to predict machinability in ferrite–pearlite steels
- (2019) M. Saez-de-Buruaga et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V
- (2019) Xiang Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy
- (2019) A. Cox et al. INTERNATIONAL JOURNAL OF FATIGUE
- New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process
- (2019) Xiao-Ming Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effects of Dislocation Density Evolution on Mechanical Behavior of OFHC Copper during High-Speed Machining
- (2019) Hongguang Liu et al. Materials
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- Recent progress of residual stress measurement methods: A review
- (2019) Jiang GUO et al. Chinese Journal of Aeronautics
- Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V
- (2019) Xiaoliang Liang et al. JOURNAL OF MATERIALS SCIENCE
- A constitutive model for Ti6Al4V considering the state of stress and strain rate effects
- (2019) Wenyu Cheng et al. MECHANICS OF MATERIALS
- A review: phase transformation and wear mechanisms of single-step and dual-step austempered ductile irons
- (2019) Bingxu Wang et al. Journal of Materials Research and Technology-JMR&T
- Investigation of the elastoplastic and fracture behavior of solid materials considering microstructural anisotropy: A discrete element modeling study
- (2019) Yong He et al. COMPUTATIONAL MATERIALS SCIENCE
- On the influence of gamma prime upon machining of advanced nickel based superalloy
- (2018) Zhirong Liao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Molecular dynamics simulation to investigate the orientation effects on nanoscale cutting of single crystal copper
- (2018) A. Sharma et al. COMPUTATIONAL MATERIALS SCIENCE
- Microhardness Prediction Based on a Microstructure-Sensitive Flow Stress Model During High Speed Machining Ti-6Al-4V
- (2018) Qingqing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining
- (2018) Hongguang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- Modeling of dynamic recrystallization in white layer in dry hard cutting by finite element—cellular automaton method
- (2018) Chunzheng Duan et al. Journal of Mechanical Science and Technology
- Predictive modeling of microstructure evolution within multi-phase steels during rolling processes
- (2018) Xiangyang Dong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method
- (2017) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation
- (2017) F. Ducobu et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Orthogonal micro-cutting modeling of the Ti17 titanium alloy using the crystal plasticity theory
- (2017) Y. Ayed et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy
- (2017) Anhai Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Enhanced Surface Integrity From Cryogenic Machining of AZ31B Mg Alloy: A Physics-Based Analysis With Microstructure Prediction
- (2017) Ninggang Shen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
- (2017) L.A. Denguir et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method
- (2017) Yong He et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Continuous dynamic recrystallization (CDRX) model for aluminum alloys
- (2017) Giovanni Maizza et al. JOURNAL OF MATERIALS SCIENCE
- General methodology to estimate the dislocation density from microhardness measurements
- (2017) Ali A.H. Ameri et al. MATERIALS CHARACTERIZATION
- The modified surface properties and fatigue life of Incoloy A286 face-milled at different cutting parameters
- (2017) Guoliang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-scale characterization of white layer in broached Inconel 718
- (2017) Zhe Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stress-induced orientation relationship variation for phase transformation of α -Ti to β -Ti during high speed machining Ti-6Al-4V
- (2017) Qingqing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Complexion-mediated martensitic phase transformation in Titanium
- (2017) J. Zhang et al. Nature Communications
- Numerical analysis of chip formation mechanisms in orthogonal cutting of Ti6Al4V alloy based on a CEL model
- (2017) Fei Shuang et al. International Journal of Material Forming
- Numerical study of smoothed particle hydrodynamics method in orthogonal cutting simulations – Effects of damage criteria and particle density
- (2017) Behrouz Takabi et al. Journal of Manufacturing Processes
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- A crystal plasticity model for twinning- and transformation-induced plasticity
- (2016) Su Leen Wong et al. ACTA MATERIALIA
- Nonlinear propagation of stress waves during high speed cutting
- (2016) Yifei Jiang et al. APPLIED PHYSICS LETTERS
- Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting
- (2016) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Development of a numerical model for the understanding of the chip formation in high-pressure water-jet assisted machining
- (2016) Y. Ayed et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Finite element modeling of microstructural changes in Waspaloy dry machining
- (2016) S. Caruso et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of microstructure evolution on chip formation and fracture during high-speed cutting of single phase metals
- (2016) Hongguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy
- (2016) Zhipeng Pan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718
- (2016) Xiaoping Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining
- (2016) Z. Atmani et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal
- (2016) Qiang Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
- (2016) Hongwei Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles
- (2016) Meriem Zouari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modelling of microstructural changes in dry and cryogenic machiningAISI 52100steel
- (2016) D. Umbrello et al. MATERIALS SCIENCE AND TECHNOLOGY
- Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V
- (2016) Bing Wang et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium
- (2015) Shreyes N. Melkote et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress
- (2015) O. Beltran et al. COMPUTATIONAL MATERIALS SCIENCE
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining
- (2015) Xiangyang Dong et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A unified material model including dislocation drag and its application to simulation of orthogonal cutting of OFHC Copper
- (2015) R. Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of machining induced microstructure in Ti–6Al–4V alloy using 3-D FE-based simulations: Effects of tool micro-geometry, coating and cutting conditions
- (2015) Yiğit M. Arısoy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure evolution during dynamic recrystallisation in polycrystalline nickel superalloys
- (2015) E.I. Galindo-Nava et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigating the microstructural effect on elastic and fracture behavior of polycrystals using a nonlocal lattice particle model
- (2015) Hailong Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy
- (2014) Giovanna Rotella et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Finite element simulation of machining Inconel 718 alloy including microstructure changes
- (2014) F. Jafarian et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys
- (2014) X.P. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machine Learning Based Predictive Modeling of Machining Induced Microhardness and Grain Size in Ti–6Al–4V Alloy
- (2014) Yiğit M. Arisoy et al. MATERIALS AND MANUFACTURING PROCESSES
- Recent advances in modelling of metal machining processes
- (2013) P.J. Arrazola et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal
- (2013) S. Abolfazl Zahedi et al. COMPUTATIONAL MATERIALS SCIENCE
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Further insight into the chip formation of ferritic-pearlitic steels: Microstructural evolutions and associated thermo-mechanical loadings
- (2013) C. Courbon et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
- (2013) M.H. Miguélez et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Thermostatistical modelling of hot deformation in FCC metals
- (2013) E.I. Galindo-Nava et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms
- (2013) H. Wang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior
- (2013) Tomohiro Takaki et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A multi-mechanism model for cutting simulations combining visco-plastic asymmetry and phase transformation
- (2013) R. Mahnken et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Multi-physics modeling and simulations of surface microstructure alteration in hard turning
- (2013) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An enhanced constitutive material model for machining of Ti–6Al–4V alloy
- (2013) Rui Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V
- (2013) A. Molinari et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- A unified internal state variable material model for inelastic deformation and microstructure evolution in SS304
- (2013) R. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A modified level set approach to 2D modeling of dynamic recrystallization
- (2013) Håkan Hallberg MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Development of metal cutting process accompanied by a localized compressive hydrostatic stress field formation: Examination by molecular dynamics simulation
- (2013) Keito Uezaki et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
- (2012) David R. Steinmetz et al. ACTA MATERIALIA
- Very high speed cutting of Ti–6Al–4V titanium alloy – change in morphology and mechanism of chip formation
- (2012) G. Sutter et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy
- (2012) G.G. Ye et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of Severe Plastic Deformation in Machining Elucidated via Rate-Strain-Microstructure Mappings
- (2012) S. Shekhar et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Metallo-Thermomechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel
- (2012) Hongtao Ding et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Controlling deformation and microstructure on machined surfaces
- (2011) Yang Guo et al. ACTA MATERIALIA
- Modeling of grain refinement in aluminum and copper subjected to cutting
- (2011) Hongtao Ding et al. COMPUTATIONAL MATERIALS SCIENCE
- Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
- (2011) Z. Pu et al. CORROSION SCIENCE
- Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95
- (2011) Du Jin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates
- (2011) R. Zaera et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements
- (2011) Y. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
- (2011) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D FINITE ELEMENT MODELLING OF CHIP FORMATION PROCESS FOR MACHINING INCONEL 718: COMPARISON OF FE SOFTWARE PREDICTIONS
- (2011) T. Ozel et al. MACHINING SCIENCE AND TECHNOLOGY
- A two-site mean field model of discontinuous dynamic recrystallization
- (2011) P. Bernard et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V
- (2011) Z.P. Wan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface
- (2011) Yancheng Zhang et al. International Journal of Material Forming
- A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel
- (2010) D. Umbrello et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel
- (2010) Domenico Umbrello INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V
- (2010) Mohammad Sima et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental lower bounds on geometrically necessary dislocation density
- (2010) J.W. Kysar et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Identification of Material Constitutive Laws for Machining—Part I: An Analytical Model Describing the Stress, Strain, Strain Rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting
- (2010) Bin Shi et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper
- (2009) Travis L. Brown et al. ACTA MATERIALIA
- A model of grain fragmentation based on lattice curvature
- (2009) László S. Tóth et al. ACTA MATERIALIA
- Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
- (2009) F. Roters et al. ACTA MATERIALIA
- Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation
- (2009) D. Umbrello et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modelling orthogonal machining of carbon steels. Part I: Strain hardening and yield delay effects
- (2009) T.H.C. Childs INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling orthogonal machining of carbon steels. Part II: Comparisons with experiments
- (2009) T.H.C. Childs et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigations on the effects of friction modeling in finite element simulation of machining
- (2009) Pedro J. Arrazola et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy
- (2009) J.D. Puerta Velásquez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase-field models in materials science
- (2009) Ingo Steinbach MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
- (2008) Y LI et al. ACTA MATERIALIA
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
- (2008) Tarek Mabrouki et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Macroscopic elastic properties of regular lattices
- (2008) Y WANG et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel
- (2008) Sangil Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel
- (2007) Anand Ramesh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel
- (2007) D. Umbrello et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started