Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress
Authors
Keywords
Coupled Eulerian-Lagrangian, Lagrangian, State of stress, Constitutive model, Machining, Ti6Al4V
Journal
SIMULATION MODELLING PRACTICE AND THEORY
Volume 110, Issue -, Pages 102312
Publisher
Elsevier BV
Online
2021-03-19
DOI
10.1016/j.simpat.2021.102312
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation
- (2020) F. Ducobu et al. International Journal of Material Forming
- Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining
- (2020) Xiang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal cutting simulations using smoothed particle hydrodynamics on the GPU
- (2019) M. Röthlin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 3D FEM simulation of the turning process of stainless steel 17-4PH with differently texturized cutting tools
- (2019) Guoliang Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effects of stress triaxiality and strain rate on the fracture strain of Ti6Al4V
- (2019) Bing Wang et al. ENGINEERING FRACTURE MECHANICS
- A novel 3D finite element simulation method for longitudinal-torsional ultrasonic-assisted milling
- (2019) Niu Ying et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A constitutive model for Ti6Al4V considering the state of stress and strain rate effects
- (2019) Wenyu Cheng et al. MECHANICS OF MATERIALS
- Hybrid Digital Image Correlation–Finite Element Modeling Approach for Modeling of Orthogonal Cutting Process
- (2018) Dong Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining
- (2018) Hongguang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy
- (2018) Tristan Régnier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds
- (2018) Thomas H.C. Childs et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- A physical behavior model including dynamic recrystallization and damage mechanisms for cutting process simulation of the titanium alloy Ti-6Al-4V
- (2018) D. Yameogo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method
- (2017) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- An ALE approach for the chip formation process in high speed machining with transient cutting conditions: Modeling and experimental validation
- (2017) Y. Avevor et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method
- (2017) Yong He et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical analysis of chip formation mechanisms in orthogonal cutting of Ti6Al4V alloy based on a CEL model
- (2017) Fei Shuang et al. International Journal of Material Forming
- Some insights on the modelling of chip formation and its morphology during metal cutting operations
- (2016) Tarek Mabrouki et al. COMPTES RENDUS MECANIQUE
- Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting
- (2016) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations
- (2016) Yiğit M. Arısoy et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- SPH accuracy improvement through the combination of a quasi-Lagrangian shifting transport velocity and consistent ALE formalisms
- (2016) G. Oger et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Chip Fracture Behavior in the High Speed Machining of Titanium Alloys
- (2016) Xueping Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Stress Field Analysis in Orthogonal Cutting Process Using Digital Image Correlation Technique
- (2016) Dong Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V
- (2016) Bing Wang et al. MATERIALS & DESIGN
- Experimental and numerical assessment of subsurface plastic deformation induced by OFHC copper machining
- (2015) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- 3D FEM simulation of chip breakage in metal cutting
- (2015) S. Buchkremer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V
- (2015) Bing Wang et al. SIMULATION MODELLING PRACTICE AND THEORY
- Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V
- (2014) Bing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cryogenic lubrication on the tribological properties of Ti6Al4V and Inconel 718 alloys under extreme contact conditions
- (2014) C. Courbon et al. Lubrication Science
- Recent advances in modelling of metal machining processes
- (2013) P.J. Arrazola et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting
- (2013) Bing Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An enhanced constitutive material model for machining of Ti–6Al–4V alloy
- (2013) Rui Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
- (2012) Thanongsak Thepsonthi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modeling of grain refinement in aluminum and copper subjected to cutting
- (2011) Hongtao Ding et al. COMPUTATIONAL MATERIALS SCIENCE
- Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model
- (2011) Guang Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Computational Constitutive Model for Glass Subjected to Large Strains, High Strain Rates and High Pressures
- (2011) Timothy J. Holmquist et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface
- (2011) Yancheng Zhang et al. International Journal of Material Forming
- Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations
- (2010) T. Özel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V
- (2010) Mohammad Sima et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of extended Mohr–Coulomb criterion to ductile fracture
- (2009) Yuanli Bai et al. INTERNATIONAL JOURNAL OF FRACTURE
- Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
- (2009) Bing Pan et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Analysis of residual stresses induced by dry turning of difficult-to-machine materials
- (2008) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A new model of metal plasticity and fracture with pressure and Lode dependence
- (2007) Yuanli Bai et al. INTERNATIONAL JOURNAL OF PLASTICITY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search