Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
Authors
Keywords
High speed metal cutting, Material deformation, Material removal mechanism, Surface integrity, Cutting force and temperature, Cutting tools
Journal
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 166, Issue -, Pages 103744
Publisher
Elsevier BV
Online
2021-05-14
DOI
10.1016/j.ijmachtools.2021.103744
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes
- (2020) Heng Zhang et al. CERAMICS INTERNATIONAL
- Geometric dynamic recrystallization of austenitic stainless steel through linear plane-strain machining
- (2020) Yaakov Idell et al. PHILOSOPHICAL MAGAZINE
- A quantitative analysis of the transition of fracture mechanisms of Ti6Al4V over a wide range of stress triaxiality and strain rate
- (2020) Bing Wang et al. ENGINEERING FRACTURE MECHANICS
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on surface quality of high-speed cutting titanium alloy Ti6Al4V based on Split-Hopkinson pressure bar
- (2020) Zhanfei Zhang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions
- (2019) Emre Tascioglu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A quick method for evaluating the thresholds of workpiece surface damage in machining
- (2019) Dongdong Xu et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions
- (2019) Xiaoliang Liang et al. Journal of Manufacturing Processes
- New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process
- (2019) Xiao-Ming Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718
- (2019) Bing Wang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Analysis and constitutive modeling of high strain rate deformation behavior of Haynes 282 aerospace superalloy
- (2019) Nnaemeka Emmanuel Ugodilinwa et al. Materials Today Communications
- State-of-the-art of surface integrity in machining of metal matrix composites
- (2019) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Residual stress regenerated on low plasticity burnished Inconel 718 surface after initial turning process
- (2019) Yang Hua et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- The effects of stress triaxiality and strain rate on the fracture strain of Ti6Al4V
- (2019) Bing Wang et al. ENGINEERING FRACTURE MECHANICS
- Experimental investigation of dynamic chip formation in orthogonal cutting
- (2019) Tamas G. Molnar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718
- (2019) Yang Hua et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys
- (2019) Dharmesh Kumar et al. Materials
- Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage
- (2019) Qi Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scratching speed on phase transformations in high-speed scratching of monocrystalline silicon
- (2019) Bing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wear performance investigation of PVD coated and uncoated carbide tools during high-speed machining of TiAl6V4 aerospace alloy
- (2019) M.S.I. Chowdhury et al. WEAR
- Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review
- (2018) Bing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A probabilistic approach to study the effect of machined surface states on HCF behavior of a AA7050 alloy
- (2018) Foued Abroug et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
- (2018) Xingchen Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining
- (2018) Hongguang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools
- (2018) Xiaoliang Liang et al. TRIBOLOGY INTERNATIONAL
- Environmental friendly hard machining performance of uncoated and MoS 2 coated mechanical micro-textured tungsten carbide cutting tools
- (2018) Kishor Kumar Gajrani et al. TRIBOLOGY INTERNATIONAL
- Wear and Tribological Performance of Different Ceramic Tools in Dry High Speed Machining of Ni-Co-Cr Precipitation Hardenable Aerospace Superalloy
- (2018) Mohamed A. Shalaby et al. TRIBOLOGY TRANSACTIONS
- Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718
- (2018) Bing Wang et al. Materials
- Effect of nozzle size scaling in co-flow water cavitation jet peening
- (2018) Andrea Marcon et al. Journal of Manufacturing Processes
- Surface residual stress in high speed cutting of superalloy Inconel718 based on multiscale simulation
- (2018) YiHang Fan et al. Journal of Manufacturing Processes
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- The effect of surface damage and residual stresses on the fatigue life of nickel superalloys at high temperature
- (2018) R.M.N. Fleury et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of machining parameters on cutting force and surface integrity when high-speed turning AD 730™ with PCBN tools
- (2018) Zhe Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy
- (2018) Bing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining
- (2017) M. Daoud et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling of flexible manufacturing system: a review
- (2017) Anupma Yadav et al. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
- Efficient Multiscale Modeling and Validation of Residual Stress Field in Cutting
- (2017) F. Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Crack initiation in the very high cycle fatigue regime of nitrided 42CrMo4 steel
- (2017) Anja Weidner et al. JOURNAL OF MATERIALS RESEARCH
- Practical applications of the “energy–triaxiality” state relationship in metal cutting
- (2017) Yalla Abushawashi et al. MACHINING SCIENCE AND TECHNOLOGY
- Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy
- (2017) Bing Wang et al. Journal of Manufacturing Processes
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances
- (2016) Jian-guang Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites
- (2016) Roland Bejjani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Hybrid modeling with finite element and statistical methods for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V
- (2016) Dong Yang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel
- (2016) Bing Wang et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy
- (2016) Bing Wang et al. JOURNAL OF CLEANER PRODUCTION
- PVDF sensor based monitoring of single-point cutting
- (2016) Vinh Nguyen et al. Journal of Manufacturing Processes
- Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V
- (2016) Bing Wang et al. MATERIALS & DESIGN
- A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening
- (2016) A.H. Mahmoudi et al. MATERIALS & DESIGN
- A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium
- (2015) Shreyes N. Melkote et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modification of the Shear-Compression Specimen for Large Strain Testing
- (2015) A. Dorogoy et al. EXPERIMENTAL MECHANICS
- 3D FEM simulation of chip breakage in metal cutting
- (2015) S. Buchkremer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influences of chip serration on micro-topography of machined surface in high-speed cutting
- (2015) Guosheng Su et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining
- (2015) Bing Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Brittle Removal Mechanism of Ductile Materials With Ultrahigh-Speed Machining
- (2015) Bing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel
- (2015) A. Banerjee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V
- (2015) Bing Wang et al. SIMULATION MODELLING PRACTICE AND THEORY
- Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V
- (2014) Bing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Critical cutting speed for onset of serrated chip flow in high speed machining
- (2014) G.G. Ye et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy
- (2013) Jin Du et al. APPLIED SURFACE SCIENCE
- Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting
- (2013) Bing Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method
- (2013) Fulin Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
- (2013) Paul A. Colegrove et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures
- (2013) Rosemar B. da Silva et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V
- (2013) A. Molinari et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature
- (2013) Xiangyu Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear
- (2013) Bing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
- (2013) Y. Kaynak et al. WEAR
- Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools
- (2012) Honghua SU et al. Chinese Journal of Aeronautics
- Surface integrity analysis of machined Inconel 718 over multiple length scales
- (2012) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations
- (2012) T. Özel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Cutting AISI 1045 steel at very high speeds
- (2012) G.G. Ye et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Very high speed cutting of Ti–6Al–4V titanium alloy – change in morphology and mechanism of chip formation
- (2012) G. Sutter et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chip Flow and Scaling Laws in High Speed Metal Cutting
- (2012) Guy Sutter et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Controlling deformation and microstructure on machined surfaces
- (2011) Yang Guo et al. ACTA MATERIALIA
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Velocity effects in metal forming and machining processes
- (2011) R. Neugebauer et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
- (2011) Jinming Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model
- (2011) Guang Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel
- (2011) Frédéric Valiorgue et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting temperature prediction in high speed machining by numerical modelling of chip formation and its dependence with crater wear
- (2011) G. List et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
- (2011) J.M. Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding in AISI 1045 steel during high speed machining: Mechanisms of microstructural evolution
- (2011) C.Z. Duan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy
- (2011) A. M. Wusatowska-Sarnek et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A model of grain fragmentation based on lattice curvature
- (2009) László S. Tóth et al. ACTA MATERIALIA
- The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti–6Al–4V
- (2009) J. Peirs et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Investigations of White Layer Formation During Machining of Powder Metallurgical Ni-Based ME 16 Superalloy
- (2009) S. C. Veldhuis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy
- (2009) J.D. Puerta Velásquez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
- (2009) C. Maranhão et al. SIMULATION MODELLING PRACTICE AND THEORY
- Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting
- (2009) M. Mohammadpour et al. SIMULATION MODELLING PRACTICE AND THEORY
- Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy
- (2008) M SURARATCHAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
- (2008) Tarek Mabrouki et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity of dry machined titanium alloys
- (2008) A. Ginting et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical and Thermal Modeling of High-Speed Machining With Chamfered Tools
- (2008) Yiğit Karpat et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Adiabatic shear critical condition in the high-speed cutting
- (2008) Li Guohe et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills
- (2008) V.D. Calatoru et al. WEAR
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
- (2007) R.S. Pawade et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Finite element simulation of conventional and high speed machining of Ti6Al4V alloy
- (2007) Domenico Umbrello JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started