The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes
出版年份 2022 全文链接
标题
The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes
作者
关键词
Metal cutting, Microstructure evolution, Microstructure features, Numerical modeling, Characterization
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 177, Issue -, Pages 103890
出版商
Elsevier BV
发表日期
2022-05-02
DOI
10.1016/j.ijmachtools.2022.103890
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress
- (2022) Wenyu Cheng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present
- (2022) Shreyes Melkote et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi
- (2021) Won Seok Choi et al. ACTA MATERIALIA
- A crystal plasticity finite element-based approach to model the constitutive behavior of multi-phase steels
- (2021) Hongguang Liu et al. Archives of Civil and Mechanical Engineering
- Fragmented chip formation mechanism in high-speed cutting from the perspective of stress wave effect
- (2021) Jun Zhang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity in metal machining - Part II: Functional performance
- (2021) Andrea la Monaca et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V
- (2021) A. Sela et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Serrated Chip Formation Induced Periodic Distribution of Morphological and Physical Characteristics in Machined Surface During High-Speed Machining of Ti6Al4V
- (2021) Binbin Xu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Influence of cutting velocity on gradient microstructure of machined surface during turning of high-strength alloy steel
- (2021) Hongwan Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The development of FEM based model of orthogonal cutting for pure iron
- (2021) Jinxing Kong et al. Journal of Manufacturing Processes
- Revealing Nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy
- (2021) Dongdong Xu et al. ACTA MATERIALIA
- A Godunov ‐type discrete element model for elastic‐viscoplastic continuum impact problems
- (2021) Zhechao Liu et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
- (2021) Bing Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress
- (2021) Xiang Xu et al. SIMULATION MODELLING PRACTICE AND THEORY
- Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes
- (2021) Andrés Sela et al. Metals
- Whole process analysis of microstructure evolution during chip formation of high-speed machining OFHC copper
- (2021) Hongguang Liu et al. Journal of Manufacturing Processes
- A modified constitutive model coupled with microstructure evolution incremental model for machining of titanium alloy Ti–6Al–4V
- (2021) Guangxin Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermomechanical modeling of crystallographic anisotropy effect on machining forces based on crystal plasticity framework
- (2021) Houssem Ben Boubaker et al. MACHINING SCIENCE AND TECHNOLOGY
- A new damage evolution criterion for the coupled Eulerian-Lagrangian approach: Application to three-dimensional numerical simulation of segmented chip formation mechanisms in orthogonal cutting
- (2021) D. Ambrosio et al. Journal of Manufacturing Processes
- Geometry-considered 3D pseudorandom grain-scale modelling for crystalline material miniature parts
- (2021) Hansong Ji et al. MATERIALS & DESIGN
- Microhardness model based on geometrically necessary dislocations for heterogeneous material
- (2021) Mohammed Mendas et al. Journal of Materials Research and Technology-JMR&T
- Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
- (2020) Mathias Agmell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Chip Formation and Phase Transformation in Orthogonal Machining of NiTi Shape Memory Alloy: Microstructure-based Modelling and Experimental Validation
- (2020) Yusuf Kaynak et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
- (2020) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A digital approach to automatically assess the machining-induced microstructural surface integrity
- (2020) Andrea la Monaca et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A Comparative Investigation Between Transmission Kikuchi Diffraction (TKD) and Precession Electron Diffraction (PED)
- (2020) Glenn Sneddon et al. MICROSCOPY AND MICROANALYSIS
- Simulation of machining of ductile polycrystalline aggregates using a remeshing framework
- (2020) A.S. Vandana et al. Journal of Manufacturing Processes
- Numerical simulation of tool wear in drilling Inconel 718 under flood and cryogenic cooling conditions
- (2020) A. Attanasio et al. WEAR
- Modelling the effects of twinning and dislocation induced strengthening in orthogonal micro and macro cutting of commercially pure titanium
- (2020) Sergio Rinaldi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining
- (2020) Xiang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
- (2020) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper
- (2019) Zhanfeng Wang et al. Journal of Manufacturing Processes
- Microstructure based flow stress model to predict machinability in ferrite–pearlite steels
- (2019) M. Saez-de-Buruaga et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V
- (2019) Xiang Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy
- (2019) A. Cox et al. INTERNATIONAL JOURNAL OF FATIGUE
- New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process
- (2019) Xiao-Ming Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effects of Dislocation Density Evolution on Mechanical Behavior of OFHC Copper during High-Speed Machining
- (2019) Hongguang Liu et al. Materials
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- Recent progress of residual stress measurement methods: A review
- (2019) Jiang GUO et al. Chinese Journal of Aeronautics
- Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V
- (2019) Xiaoliang Liang et al. JOURNAL OF MATERIALS SCIENCE
- A constitutive model for Ti6Al4V considering the state of stress and strain rate effects
- (2019) Wenyu Cheng et al. MECHANICS OF MATERIALS
- A review: phase transformation and wear mechanisms of single-step and dual-step austempered ductile irons
- (2019) Bingxu Wang et al. Journal of Materials Research and Technology-JMR&T
- Investigation of the elastoplastic and fracture behavior of solid materials considering microstructural anisotropy: A discrete element modeling study
- (2019) Yong He et al. COMPUTATIONAL MATERIALS SCIENCE
- On the influence of gamma prime upon machining of advanced nickel based superalloy
- (2018) Zhirong Liao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Molecular dynamics simulation to investigate the orientation effects on nanoscale cutting of single crystal copper
- (2018) A. Sharma et al. COMPUTATIONAL MATERIALS SCIENCE
- Microhardness Prediction Based on a Microstructure-Sensitive Flow Stress Model During High Speed Machining Ti-6Al-4V
- (2018) Qingqing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining
- (2018) Hongguang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- Modeling of dynamic recrystallization in white layer in dry hard cutting by finite element—cellular automaton method
- (2018) Chunzheng Duan et al. Journal of Mechanical Science and Technology
- Predictive modeling of microstructure evolution within multi-phase steels during rolling processes
- (2018) Xiangyang Dong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method
- (2017) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation
- (2017) F. Ducobu et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Orthogonal micro-cutting modeling of the Ti17 titanium alloy using the crystal plasticity theory
- (2017) Y. Ayed et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy
- (2017) Anhai Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Enhanced Surface Integrity From Cryogenic Machining of AZ31B Mg Alloy: A Physics-Based Analysis With Microstructure Prediction
- (2017) Ninggang Shen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
- (2017) L.A. Denguir et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method
- (2017) Yong He et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Continuous dynamic recrystallization (CDRX) model for aluminum alloys
- (2017) Giovanni Maizza et al. JOURNAL OF MATERIALS SCIENCE
- General methodology to estimate the dislocation density from microhardness measurements
- (2017) Ali A.H. Ameri et al. MATERIALS CHARACTERIZATION
- The modified surface properties and fatigue life of Incoloy A286 face-milled at different cutting parameters
- (2017) Guoliang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-scale characterization of white layer in broached Inconel 718
- (2017) Zhe Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stress-induced orientation relationship variation for phase transformation of α -Ti to β -Ti during high speed machining Ti-6Al-4V
- (2017) Qingqing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Complexion-mediated martensitic phase transformation in Titanium
- (2017) J. Zhang et al. Nature Communications
- Numerical analysis of chip formation mechanisms in orthogonal cutting of Ti6Al4V alloy based on a CEL model
- (2017) Fei Shuang et al. International Journal of Material Forming
- Numerical study of smoothed particle hydrodynamics method in orthogonal cutting simulations – Effects of damage criteria and particle density
- (2017) Behrouz Takabi et al. Journal of Manufacturing Processes
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- A crystal plasticity model for twinning- and transformation-induced plasticity
- (2016) Su Leen Wong et al. ACTA MATERIALIA
- Nonlinear propagation of stress waves during high speed cutting
- (2016) Yifei Jiang et al. APPLIED PHYSICS LETTERS
- Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting
- (2016) F. Ducobu et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Development of a numerical model for the understanding of the chip formation in high-pressure water-jet assisted machining
- (2016) Y. Ayed et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Finite element modeling of microstructural changes in Waspaloy dry machining
- (2016) S. Caruso et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of microstructure evolution on chip formation and fracture during high-speed cutting of single phase metals
- (2016) Hongguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy
- (2016) Zhipeng Pan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718
- (2016) Xiaoping Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining
- (2016) Z. Atmani et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal
- (2016) Qiang Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
- (2016) Hongwei Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles
- (2016) Meriem Zouari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modelling of microstructural changes in dry and cryogenic machiningAISI 52100steel
- (2016) D. Umbrello et al. MATERIALS SCIENCE AND TECHNOLOGY
- Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V
- (2016) Bing Wang et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium
- (2015) Shreyes N. Melkote et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress
- (2015) O. Beltran et al. COMPUTATIONAL MATERIALS SCIENCE
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining
- (2015) Xiangyang Dong et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A unified material model including dislocation drag and its application to simulation of orthogonal cutting of OFHC Copper
- (2015) R. Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of machining induced microstructure in Ti–6Al–4V alloy using 3-D FE-based simulations: Effects of tool micro-geometry, coating and cutting conditions
- (2015) Yiğit M. Arısoy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure evolution during dynamic recrystallisation in polycrystalline nickel superalloys
- (2015) E.I. Galindo-Nava et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigating the microstructural effect on elastic and fracture behavior of polycrystals using a nonlocal lattice particle model
- (2015) Hailong Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy
- (2014) Giovanna Rotella et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Finite element simulation of machining Inconel 718 alloy including microstructure changes
- (2014) F. Jafarian et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys
- (2014) X.P. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machine Learning Based Predictive Modeling of Machining Induced Microhardness and Grain Size in Ti–6Al–4V Alloy
- (2014) Yiğit M. Arisoy et al. MATERIALS AND MANUFACTURING PROCESSES
- Recent advances in modelling of metal machining processes
- (2013) P.J. Arrazola et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal
- (2013) S. Abolfazl Zahedi et al. COMPUTATIONAL MATERIALS SCIENCE
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Further insight into the chip formation of ferritic-pearlitic steels: Microstructural evolutions and associated thermo-mechanical loadings
- (2013) C. Courbon et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
- (2013) M.H. Miguélez et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Thermostatistical modelling of hot deformation in FCC metals
- (2013) E.I. Galindo-Nava et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms
- (2013) H. Wang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior
- (2013) Tomohiro Takaki et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A multi-mechanism model for cutting simulations combining visco-plastic asymmetry and phase transformation
- (2013) R. Mahnken et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Multi-physics modeling and simulations of surface microstructure alteration in hard turning
- (2013) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An enhanced constitutive material model for machining of Ti–6Al–4V alloy
- (2013) Rui Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V
- (2013) A. Molinari et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- A unified internal state variable material model for inelastic deformation and microstructure evolution in SS304
- (2013) R. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A modified level set approach to 2D modeling of dynamic recrystallization
- (2013) Håkan Hallberg MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Development of metal cutting process accompanied by a localized compressive hydrostatic stress field formation: Examination by molecular dynamics simulation
- (2013) Keito Uezaki et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
- (2012) David R. Steinmetz et al. ACTA MATERIALIA
- Very high speed cutting of Ti–6Al–4V titanium alloy – change in morphology and mechanism of chip formation
- (2012) G. Sutter et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy
- (2012) G.G. Ye et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of Severe Plastic Deformation in Machining Elucidated via Rate-Strain-Microstructure Mappings
- (2012) S. Shekhar et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Metallo-Thermomechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel
- (2012) Hongtao Ding et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Controlling deformation and microstructure on machined surfaces
- (2011) Yang Guo et al. ACTA MATERIALIA
- Modeling of grain refinement in aluminum and copper subjected to cutting
- (2011) Hongtao Ding et al. COMPUTATIONAL MATERIALS SCIENCE
- Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
- (2011) Z. Pu et al. CORROSION SCIENCE
- Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95
- (2011) Du Jin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates
- (2011) R. Zaera et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements
- (2011) Y. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
- (2011) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D FINITE ELEMENT MODELLING OF CHIP FORMATION PROCESS FOR MACHINING INCONEL 718: COMPARISON OF FE SOFTWARE PREDICTIONS
- (2011) T. Ozel et al. MACHINING SCIENCE AND TECHNOLOGY
- A two-site mean field model of discontinuous dynamic recrystallization
- (2011) P. Bernard et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V
- (2011) Z.P. Wan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface
- (2011) Yancheng Zhang et al. International Journal of Material Forming
- A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel
- (2010) D. Umbrello et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel
- (2010) Domenico Umbrello INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti–6Al–4V
- (2010) Mohammad Sima et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental lower bounds on geometrically necessary dislocation density
- (2010) J.W. Kysar et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Identification of Material Constitutive Laws for Machining—Part I: An Analytical Model Describing the Stress, Strain, Strain Rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting
- (2010) Bin Shi et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper
- (2009) Travis L. Brown et al. ACTA MATERIALIA
- A model of grain fragmentation based on lattice curvature
- (2009) László S. Tóth et al. ACTA MATERIALIA
- Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
- (2009) F. Roters et al. ACTA MATERIALIA
- Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation
- (2009) D. Umbrello et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modelling orthogonal machining of carbon steels. Part I: Strain hardening and yield delay effects
- (2009) T.H.C. Childs INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling orthogonal machining of carbon steels. Part II: Comparisons with experiments
- (2009) T.H.C. Childs et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigations on the effects of friction modeling in finite element simulation of machining
- (2009) Pedro J. Arrazola et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy
- (2009) J.D. Puerta Velásquez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase-field models in materials science
- (2009) Ingo Steinbach MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
- (2008) Y LI et al. ACTA MATERIALIA
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
- (2008) Tarek Mabrouki et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Macroscopic elastic properties of regular lattices
- (2008) Y WANG et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel
- (2008) Sangil Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel
- (2007) Anand Ramesh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel
- (2007) D. Umbrello et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started