Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
Authors
Keywords
Metal machining, Surface integrity, Microstructural alterations, Materials characterisation, Post processing
Journal
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 162, Issue -, Pages 103687
Publisher
Elsevier BV
Online
2020-12-30
DOI
10.1016/j.ijmachtools.2020.103687
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Atom Probe Tomography: Development and Application to the Geosciences
- (2020) Steven M. Reddy et al. GEOSTANDARDS AND GEOANALYTICAL RESEARCH
- A generic approach of polishing metals via isotropic electrochemical etching
- (2020) Rong Yi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of the electrolyte composition on the electrochemical dissolution behavior of forged Inconel 718
- (2020) Mariem Msakni Malouche et al. JOURNAL OF APPLIED ELECTROCHEMISTRY
- Characterization of plastic deformation induced by machining in a Ni-based superalloy
- (2020) Rengen Ding et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform
- (2020) Divyansh Singh Patel et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance
- (2020) Dun Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Controlling of compliant grinding for low-rigidity components
- (2020) Yue Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Development of a novel system for in-situ repair of aeroengine airfoil via pulsed laser ablation
- (2020) D. Cha et al. JOURNAL OF MANUFACTURING SYSTEMS
- Dual-Processing by Abrasive Waterjet Machining – A Method for Machining and Surface Modification of Nickel-Based Superalloy
- (2020) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solving Recent Challenges for Wrought Ni-Base Superalloys
- (2020) M. C. Hardy et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ultrasonic-assisted electrochemical drill-grinding of small holes with high-quality
- (2020) Xiangming Zhu et al. Journal of Advanced Research
- Surface and subsurface damage of reaction-bonded silicon carbide induced by electrical discharge diamond grinding
- (2020) Xiaoshuang Rao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe
- (2020) Weihai Huang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Formation mechanism of alumina layer in protecting cubic boron nitride inserts in turning cast irons
- (2020) D. Nguyen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Wire electrochemical micromachining: An overview
- (2020) Vyom Sharma et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effects
- (2020) Krishna Kumar Saxena et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental and theoretical study of internal finishing by a novel magnetically driven polishing tool
- (2020) Jiong Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A digital approach to automatically assess the machining-induced microstructural surface integrity
- (2020) Andrea la Monaca et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining
- (2020) Xiao Han et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electron microscopic characterization of surface zones thermo-chemically modified by electrical discharge machining
- (2020) L.C. Ehle et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth
- (2020) Florian Borchers et al. Metals
- Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale
- (2020) Qi Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Plasma-assisted electrochemical machining of microtools and microstructures
- (2020) Shunda Zhan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting of tantalum: Why it is so difficult and what can be done about it
- (2020) Jason M. Davis et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Electrolyte jet machining of Ti1023 titanium alloy using NaCl ethylene glycol-based electrolyte
- (2020) Weidong Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of surface pre-treatment with mechanical polishing, chemical, electrochemical and ion sputter etching on the surface properties, corrosion resistance and MG-63 cell colonization of commercially pure titanium
- (2020) Petr Vlcak et al. Materials Science & Engineering C-Materials for Biological Applications
- Investigation of surface integrity in laser-assisted machining of nickel based superalloy
- (2020) Dongdong Xu et al. MATERIALS & DESIGN
- Identification and optimization of CNC dynamics in time-dependent machining processes and its validation to fluid jet polishing
- (2020) Yuichi Mizoue et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An efficient approach for atomic-scale polishing of single-crystal silicon via plasma-based atom-selective etching
- (2020) Zhidong Fang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining-induced thermal damage in cortical bone: Necrosis and micro-mechanical integrity
- (2020) Jose A. Robles-Linares et al. MATERIALS & DESIGN
- Large current ion beam polishing and characterization of mechanically finished titanium alloy (Ti6Al4V) surface
- (2019) Guangxue Zhou et al. APPLIED SURFACE SCIENCE
- Measurement and prediction of through-section residual stresses in the manufacturing sequence of bearing components
- (2019) Vikram Bedekar et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Heat effect on the material removal in the machining of fibre-reinforced polymer composites
- (2019) Weixing Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fundamental aspects and recent developments in electropolishing
- (2019) Wei Han et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluation of fluences and surface characteristics in laser polishing SKD 11 tool steel
- (2019) Wei Dai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V
- (2019) Xiang Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Machining of biocompatible materials — Recent advances
- (2019) Dragos Axinte et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy
- (2019) A. Cox et al. INTERNATIONAL JOURNAL OF FATIGUE
- Highly efficient planarization of sliced 4H–SiC (0001) wafer by slurryless electrochemical mechanical polishing
- (2019) Xu Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Optimization of material removal rate in milling of thin-walled structures using penalty cost function
- (2019) Kasper Ringgaard et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Geometrical modelling of pulsed laser ablation of high performance metallic alloys
- (2019) D. Cha et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Wire electrochemical micromachining of Ni-based metallic glass using bipolar nanosecond pulses
- (2019) Lingchao Meng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of electrolyte flow mode on characteristics of electrochemical machining with electrolyte suction tool
- (2019) Guixian Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Breakthrough phenomena in drilling micro holes by EDM
- (2019) Mattia Bellotti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Drilling force model for forced low frequency vibration assisted drilling of Ti–6Al–4V titanium alloy
- (2019) Haojun Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Study on quantitative estimation of bubble behavior in micro hole drilling with EDM
- (2019) Guodong Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of machining processes on rim zone properties and high temperature oxidation behavior of 42CrMo4
- (2019) Daniela Zander et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Fatigue Behavior of Non-Optimized Laser-Cut Medical Grade Ti-6Al-4V-ELI Sheets and the Effects of Mechanical Post-Processing
- (2019) André Reck et al. Metals
- Toward understanding of metallurgical behaviours in dry machining of hardened steel: phase transformation and surface oxidation
- (2019) Binxun Li et al. Journal of Materials Research and Technology-JMR&T
- Nanosecond pulsed laser-generated stress effect inducing macro-micro-nano structures and surface topography evolution
- (2019) Guoxin Lu et al. Applied Materials Today
- Self‐Organized Periodic Microholes Array Formation on Aluminum Surface via Femtosecond Laser Ablation Induced Incubation Effect
- (2019) Huagang Liu et al. ADVANCED FUNCTIONAL MATERIALS
- Automatic measurement of grinding-induced white layer in titanium alloys based on image processing technique
- (2019) Yong Jie Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations
- (2019) Harry Otalora-Ortega et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Aerodynamic focusing of an abrasive air jet and its effect on machining resolution
- (2019) Xiangyu Luo et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- State-of-the-art of surface integrity in machining of metal matrix composites
- (2019) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Deformation mechanism and force modelling of the grinding of YAG single crystals
- (2019) Chen Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Study on material removal mechanism of electrochemical deep grinding
- (2019) YongCheng Ge et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy
- (2019) A. Pramanik et al. INTERNATIONAL JOURNAL OF FATIGUE
- Experimental investigation of dynamic chip formation in orthogonal cutting
- (2019) Tamas G. Molnar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel cryogenic machining concept based on a lubricated liquid carbon dioxide
- (2019) Damir Grguraš et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone
- (2019) Min Wan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Condition monitoring of the feed drive system of a machine tool based on long-term operational modal analysis
- (2019) Pingjia Jia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Oscillatory behaviour in the electrochemical jet processing of titanium
- (2019) Alistair Speidel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of surface microstructures by mask electrolyte jet machining
- (2019) Ming Wu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Robust stability of milling operations based on pseudospectral approach
- (2019) David Hajdu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fundamental aspects and recent developments in metal surface polishing with energy beam irradiation
- (2019) Tiantian Deng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool–chip thermal conductance coefficient and heat flux in machining: Theory, model and experiment
- (2019) V. Kryzhanivskyy et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Prediction of cutting forces during micro end milling considering chip thickness accumulation
- (2019) S. Wojciechowski et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C
- (2019) Guangfang Chi et al. Journal of Materials Research and Technology-JMR&T
- Experimental study of the morphological evolution of the millisecond–nanosecond combined-pulse laser ablation of aluminum alloy
- (2018) Bo-Shi Yuan et al. APPLIED OPTICS
- Femtosecond laser ablation of Al-Mg alloy in vacuum and air
- (2018) Hong-qiang Dou et al. APPLIED SURFACE SCIENCE
- Simulation and experimental investigation of inner-jet electrochemical grinding of GH4169 alloy
- (2018) Hansong LI et al. Chinese Journal of Aeronautics
- Kinetics of Passive Film Growth on 304 Stainless Steel in H2SO4 Pickling Solution under Chemical Oxidation
- (2018) Yingying Yue et al. CORROSION
- Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes
- (2018) Nicolau Iralal Morar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on process capabilities of electrochemical micromachining and its hybrid variants
- (2018) Krishna Kumar Saxena et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy
- (2018) Matthew S. Dargusch et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Electrochemical micromachining on titanium using the NaCl-containing ethylene glycol electrolyte
- (2018) Weidong Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on immersion waterjet assisted laser micromachining process
- (2018) Yufeng Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The importance of microstructure in electrochemical jet processing
- (2018) Alistair Speidel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of ultrasonic vibration on percussion drilling performance for millisecond pulsed Nd:YAG laser
- (2018) Houxiao Wang et al. OPTICS AND LASER TECHNOLOGY
- Self-cleaning effect in high quality percussion ablating of cooling hole by picosecond ultra-short pulse laser
- (2018) Wanqin Zhao et al. OPTICS AND LASERS IN ENGINEERING
- Wear performance of TiC/Fe cermet electrical discharge coatings
- (2018) Samer J. Algodi et al. WEAR
- Kinetics of Passive Film Growth on 304 Stainless Steel in H2SO4 Pickling Solution under Chemical Oxidation
- (2018) Yingying Yue et al. CORROSION
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- Defect-free TiC/Si multi-layer electrical discharge coatings
- (2018) J.W. Murray et al. MATERIALS & DESIGN
- Crystallographic texture can be rapidly determined by electrochemical surface analytics
- (2018) Alistair Speidel et al. ACTA MATERIALIA
- Ultrasonic characterization of dry and wet nanosecond laser ablation of solids
- (2018) S.I. Kudryashov et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy
- (2018) Xiao-ping Ren et al. International Journal of Minerals Metallurgy and Materials
- Comparison of percussion laser drilling quality with and without water-based ultrasonic assistance
- (2018) Houxiao Wang et al. Journal of Manufacturing Processes
- A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys
- (2018) R. Aigner et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reducing stray corrosion in jet electrochemical milling by adjusting the jet shape
- (2018) Xindi Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On establishment and validation of a new predictive model for material removal in abrasive flow machining
- (2018) Haibo Wei et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Ultrashort pulsed laser ablation of stainless steels
- (2018) V. Villerius et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanism for material removal in ultrasonic vibration helical milling of Ti 6Al 4V alloy
- (2018) Guang Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on the surface layer formed during electrochemical modification of pure iron
- (2018) Kangnan Fan et al. APPLIED SURFACE SCIENCE
- Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water
- (2018) Litao Chang et al. ACTA MATERIALIA
- Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy
- (2018) Chaojiang Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On modelling of cutting force and temperature in bone milling
- (2018) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Energy distribution modulation by mechanical design for electrochemical jet processing techniques
- (2017) Jonathon Mitchell-Smith et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A multiscale evaluation of the surface integrity in boring trepanning association deep hole drilling
- (2017) Huang Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium
- (2017) Hao Zhu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production
- (2017) Miroslav Neslušan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Erosion mechanisms during abrasive waterjet machining: Model microstructures and single particle experiments
- (2017) M. Mieszala et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation mechanism of electrical discharge TiC-Fe composite coatings
- (2017) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electrochemical Machining Properties of the Laser Rapid Formed Inconel 718 Alloy in NaNO 3 Solution
- (2017) Xindi Wang et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Microlubrication machining of 1018 steel: the effect of a biodegradable lubricant on the microstructural integrity
- (2017) Vasim A. Shaikh et al. Lubrication Science
- Nano-scale characterization of white layer in broached Inconel 718
- (2017) Zhe Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface integrity in electrochemical machining processes: An analysis on material modifications occurring during electrochemical machining
- (2017) Fritz Klocke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Electrochemical machining of titanium. Review
- (2017) A. D. Davydov et al. RUSSIAN JOURNAL OF ELECTROCHEMISTRY
- Nanosecond laser ablation of Al-Si coating on boron steel
- (2017) Fang Li et al. SURFACE & COATINGS TECHNOLOGY
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process
- (2017) Goutam Devaraya Revankar et al. Journal of Materials Research and Technology-JMR&T
- Control of the kerf size and microstructure in Inconel 738 superalloy by femtosecond laser beam cutting
- (2016) J. Wei et al. APPLIED SURFACE SCIENCE
- Atomic migration of carbon in hard turned layers of carburized bearing steel
- (2016) Vikram Bedekar et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Electrochemical Machining—mechanisms of anodic dissolution
- (2016) M.M. Lohrengel et al. ELECTROCHIMICA ACTA
- State-of-the-art in surface integrity in machining of nickel-based super alloys
- (2016) A. Thakur et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Detection of a milling-induced surface damage by the magnetic Barkhausen noise
- (2016) A. Stupakov et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Manufacturing at double the speed
- (2016) Julian M. Allwood et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Investigations of the White and Deformed Layers Close to the Turned Surface of Ti-6Al-4V
- (2016) Mickael Rancic et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ablation-cooled material removal with ultrafast bursts of pulses
- (2016) Can Kerse et al. NATURE
- A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate
- (2016) Mudimallana Goud et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Quantification of Microstructural Features and Prediction of Mechanical Properties of a Dual-Phase Ti-6Al-4V Alloy
- (2016) Dong Yang et al. Materials
- Electrochemical micromachining: An introduction
- (2016) Rebecca J Leese et al. Advances in Mechanical Engineering
- Formation mechanisms of white layers induced by hard turning of AISI 52100 steel
- (2015) S.B. Hosseini et al. ACTA MATERIALIA
- High performance cutting of advanced aerospace alloys and composite materials
- (2015) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
- (2015) J. Soltis CORROSION SCIENCE
- Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution
- (2015) Dengyong Wang et al. ELECTROCHIMICA ACTA
- High aspect ratio cutting of metals using water jet guided laser
- (2015) B. Adelmann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-scale statistical signal processing of cutting force in cutting tool condition monitoring
- (2015) Dong Gao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-channels by Nd:YAG laser beam machining: fabrication, microstructures, and micro-hardness profiles
- (2015) Naveed Ahmed et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-scale hybrid HMM for tool wear condition monitoring
- (2015) Zhirong Liao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Stochastic modelling of abrasive waterjet footprints using finite element analysis
- (2015) P. Lozano Torrubia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of energy loss mechanisms in water-jet assisted underwater laser cutting process using an analytical model
- (2015) Suvradip Mullick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Light press of sheet metal edge for reducing residual stress generated by laser cutting considering mechanical properties and intensity of residual stress
- (2015) Atsushi Maeda et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ultrafast laser processing of materials: a review
- (2015) Katherine C. Phillips et al. Advances in Optics and Photonics
- A quantitative approach to study the effect of local texture and heterogeneous plastic strain on the deformation micromechanism in RR1000 nickel-based superalloy
- (2014) S. Birosca et al. ACTA MATERIALIA
- Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent
- (2014) Sung-Long Chen et al. APPLIED SURFACE SCIENCE
- Evidence for increased incubation parameter in multi-pulse ablation of a Pt:SS alloy using a femtosecond laser at high repetition rates
- (2014) Clare McDaniel et al. APPLIED SURFACE SCIENCE
- Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes
- (2014) Fritz Klocke et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
- (2014) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Performance of laser polishing in finishing of metallic surfaces
- (2014) Evgueni V. Bordatchev et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining
- (2014) Todd M. Mower INTERNATIONAL JOURNAL OF FATIGUE
- A review of modeling and simulation of laser beam machining
- (2014) Pedram Parandoush et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy
- (2014) C. Herbert et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Cutting temperatures during hard turning—Measurements and effects on white layer formation in AISI 52100
- (2014) S.B. Hosseini et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Role of heat accumulation on the incubation effect in multi-shot laser ablation of stainless steel at high repetition rates
- (2014) Francesca Di Niso et al. OPTICS EXPRESS
- Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation
- (2014) J.W. Murray et al. SURFACE & COATINGS TECHNOLOGY
- Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
- (2014) K. Ahmmed et al. Micromachines
- Analysis and Reduction of Stray-Current Attack in Reciprocated Traveling Wire Electrochemical Machining
- (2014) Yongbin Zeng et al. Advances in Mechanical Engineering
- Effect of dry and wet ambient environment on the pulsed laser ablation of titanium
- (2013) Nisar Ali et al. APPLIED SURFACE SCIENCE
- Development of a water-jet assisted laser paint removal process
- (2013) Yuvraj K. Madhukar et al. APPLIED SURFACE SCIENCE
- On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
- (2013) Ming Chu Kong et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Underwater-laser drilling of aluminum
- (2013) Nikša Krstulović et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- FIB/TEM/EELS micro/nanometric investigations of the effects of laser ablation on the diamond/binder structure in polycrystalline diamond composites
- (2013) M. Pacella et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension
- (2012) Pichai Janmanee et al. APPLIED SURFACE SCIENCE
- Surface integrity analysis of machined Inconel 718 over multiple length scales
- (2012) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of chemical milling on low-cycle fatigue behavior of an Al–Mg–Si alloy
- (2012) Ashley D. Spear et al. CORROSION SCIENCE
- Understanding the effect of bromides on the stability of titanium oxide films based on a point defect model
- (2012) Dimitra Sazou et al. ELECTROCHIMICA ACTA
- Effect of electro discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance
- (2012) Habib Sidhom et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on surface integrity of grinding Inconel718
- (2012) C. F. Yao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of the Anode Crater Formation in Electrical Discharge Machining
- (2012) Jia Tao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy
- (2012) C.R.J. Herbert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Repair of EDM induced surface cracks by pulsed electron beam irradiation
- (2012) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- TEM study on the electrical discharge machined surface of single-crystal silicon
- (2012) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- INVESTIGATION INTO THE CHARACTERISTICS OF WHITE LAYERS PRODUCED IN A NICKEL-BASED SUPERALLOY FROM DRILLING OPERATIONS
- (2012) Christopher Herbert et al. MACHINING SCIENCE AND TECHNOLOGY
- CO2 laser cut quality of Inconel 718 nickel – based superalloy
- (2012) Ahmet Hasçalık et al. OPTICS AND LASER TECHNOLOGY
- A new TriBeam system for three-dimensional multimodal materials analysis
- (2012) McLean P. Echlin et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Is Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry (SEM/EDS) Quantitative?
- (2012) Dale E. Newbury et al. SCANNING
- Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric
- (2011) Yanzhen Zhang et al. APPLIED SURFACE SCIENCE
- Machinability and surface integrity of RR1000 nickel based superalloy
- (2011) S.L. Soo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
- (2011) Z. Pu et al. CORROSION SCIENCE
- Effect of very high cutting speeds on shearing, cutting forces and roughness in dry turning of austenitic stainless steels
- (2011) A. I. Fernández-Abia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser hole cutting into Ti-6Al-4V alloy and thermal stress analysis
- (2011) Bekir Sami Yilbas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
- (2011) Jinming Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser trepanning of a small diameter hole in titanium alloy: Temperature and stress fields
- (2011) B.S. Yilbas et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys
- (2011) Hamid Reza Bakhsheshi Rad et al. MATERIALS & DESIGN
- Drilling of Difficult-to-Cut Steel by Electrochemical Discharge Machining
- (2011) Margareta Coteaţă et al. MATERIALS AND MANUFACTURING PROCESSES
- Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium
- (2011) S.V. Zherebtsov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94
- (2011) M. Burger et al. Journal of Manufacturing Processes
- Ultra-short pulse laser ablation of metals: threshold fluence, incubation coefficient and ablation rates
- (2010) Jeppe Byskov-Nielsen et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Wire electro discharge trueing and dressing of fine grinding wheels
- (2010) A. Klink CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microscopic Observations on the Origin of Defects During Machining of Direct Aged (DA) Inconel 718 Superalloy
- (2010) G. K. Dosbaeva et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of pitting corrosion on fatigue performance of shot-peened aluminium alloy 7075-T651
- (2010) U. Zupanc et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
- (2010) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Molecular dynamics simulation of the material removal mechanism in micro-EDM
- (2010) Xiaodong Yang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper
- (2009) Travis L. Brown et al. ACTA MATERIALIA
- Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points
- (2009) D.T. Curtis et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Ion beam, focused ion beam, and plasma discharge machining
- (2009) D.M. Allen et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- An analysis of the discharge mechanism in electrochemical discharge machining of particulate reinforced metal matrix composites
- (2009) J.W. Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite
- (2009) K.M. Patel et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Aspects of material removal mechanism in plain waterjet milling on gamma titanium aluminide
- (2009) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The coating of TiC layer on the surface of nickel by electric discharge coating (EDC) with a multi-layer electrode
- (2009) Yu-Lung Hwang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Atomistic Modeling of Short Pulse Laser Ablation of Metals: Connections between Melting, Spallation, and Phase Explosion
- (2009) Leonid V. Zhigilei et al. Journal of Physical Chemistry C
- MICROSTRUCTURAL ANALYSIS AND MACHINABILITY IMPROVEMENT OF UDIMET 720 VIA CRYOGENIC MILLING
- (2009) Samuel L. Truesdale et al. MACHINING SCIENCE AND TECHNOLOGY
- Nanoscale carbide precipitation in the recast layer of a percussion laser-drilled superalloy
- (2009) Jacquelynn K.M. Garofano et al. SCRIPTA MATERIALIA
- Pulsed laser polishing of micro-milled Ti6Al4V samples
- (2009) Tyler L. Perry et al. Journal of Manufacturing Processes
- Laser ablation with short and ultrashort laser pulses: Basic mechanisms from molecular-dynamics simulations
- (2008) Laurent J. Lewis et al. APPLIED SURFACE SCIENCE
- Analysis of residual stresses induced by dry turning of difficult-to-machine materials
- (2008) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks
- (2008) T TAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser ablation in a liquid-confined environment using a nanosecond laser pulse
- (2008) Hyun Wook Kang et al. JOURNAL OF APPLIED PHYSICS
- The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress
- (2008) J. Kwong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of microstructural effects in a percussion laser-drilled powder metallurgy Ni-based superalloy
- (2008) Jacquelynn K. M. Garofano et al. JOURNAL OF MATERIALS SCIENCE
- Laser cutting of thick sheet metals: Residual stress analysis
- (2008) A.F.M. Arif et al. OPTICS AND LASER TECHNOLOGY
- Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration
- (2008) Lin ZHANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started