Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
出版年份 2020 全文链接
标题
Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
作者
关键词
Metal machining, Surface integrity, Microstructural alterations, Materials characterisation, Post processing
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 162, Issue -, Pages 103687
出版商
Elsevier BV
发表日期
2020-12-30
DOI
10.1016/j.ijmachtools.2020.103687
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Atom Probe Tomography: Development and Application to the Geosciences
- (2020) Steven M. Reddy et al. GEOSTANDARDS AND GEOANALYTICAL RESEARCH
- A generic approach of polishing metals via isotropic electrochemical etching
- (2020) Rong Yi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of the electrolyte composition on the electrochemical dissolution behavior of forged Inconel 718
- (2020) Mariem Msakni Malouche et al. JOURNAL OF APPLIED ELECTROCHEMISTRY
- Characterization of plastic deformation induced by machining in a Ni-based superalloy
- (2020) Rengen Ding et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform
- (2020) Divyansh Singh Patel et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance
- (2020) Dun Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Controlling of compliant grinding for low-rigidity components
- (2020) Yue Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Development of a novel system for in-situ repair of aeroengine airfoil via pulsed laser ablation
- (2020) D. Cha et al. JOURNAL OF MANUFACTURING SYSTEMS
- Dual-Processing by Abrasive Waterjet Machining – A Method for Machining and Surface Modification of Nickel-Based Superalloy
- (2020) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solving Recent Challenges for Wrought Ni-Base Superalloys
- (2020) M. C. Hardy et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ultrasonic-assisted electrochemical drill-grinding of small holes with high-quality
- (2020) Xiangming Zhu et al. Journal of Advanced Research
- Surface and subsurface damage of reaction-bonded silicon carbide induced by electrical discharge diamond grinding
- (2020) Xiaoshuang Rao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe
- (2020) Weihai Huang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Formation mechanism of alumina layer in protecting cubic boron nitride inserts in turning cast irons
- (2020) D. Nguyen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Wire electrochemical micromachining: An overview
- (2020) Vyom Sharma et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effects
- (2020) Krishna Kumar Saxena et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental and theoretical study of internal finishing by a novel magnetically driven polishing tool
- (2020) Jiong Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A digital approach to automatically assess the machining-induced microstructural surface integrity
- (2020) Andrea la Monaca et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining
- (2020) Xiao Han et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electron microscopic characterization of surface zones thermo-chemically modified by electrical discharge machining
- (2020) L.C. Ehle et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Comparison of Different Manufacturing Processes of AISI 4140 Steel with Regard to Surface Modification and Its Influencing Depth
- (2020) Florian Borchers et al. Metals
- Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale
- (2020) Qi Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Plasma-assisted electrochemical machining of microtools and microstructures
- (2020) Shunda Zhan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting of tantalum: Why it is so difficult and what can be done about it
- (2020) Jason M. Davis et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Electrolyte jet machining of Ti1023 titanium alloy using NaCl ethylene glycol-based electrolyte
- (2020) Weidong Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of surface pre-treatment with mechanical polishing, chemical, electrochemical and ion sputter etching on the surface properties, corrosion resistance and MG-63 cell colonization of commercially pure titanium
- (2020) Petr Vlcak et al. Materials Science & Engineering C-Materials for Biological Applications
- Investigation of surface integrity in laser-assisted machining of nickel based superalloy
- (2020) Dongdong Xu et al. MATERIALS & DESIGN
- Identification and optimization of CNC dynamics in time-dependent machining processes and its validation to fluid jet polishing
- (2020) Yuichi Mizoue et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An efficient approach for atomic-scale polishing of single-crystal silicon via plasma-based atom-selective etching
- (2020) Zhidong Fang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining-induced thermal damage in cortical bone: Necrosis and micro-mechanical integrity
- (2020) Jose A. Robles-Linares et al. MATERIALS & DESIGN
- Large current ion beam polishing and characterization of mechanically finished titanium alloy (Ti6Al4V) surface
- (2019) Guangxue Zhou et al. APPLIED SURFACE SCIENCE
- Measurement and prediction of through-section residual stresses in the manufacturing sequence of bearing components
- (2019) Vikram Bedekar et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Heat effect on the material removal in the machining of fibre-reinforced polymer composites
- (2019) Weixing Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fundamental aspects and recent developments in electropolishing
- (2019) Wei Han et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluation of fluences and surface characteristics in laser polishing SKD 11 tool steel
- (2019) Wei Dai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V
- (2019) Xiang Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Machining of biocompatible materials — Recent advances
- (2019) Dragos Axinte et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy
- (2019) A. Cox et al. INTERNATIONAL JOURNAL OF FATIGUE
- Highly efficient planarization of sliced 4H–SiC (0001) wafer by slurryless electrochemical mechanical polishing
- (2019) Xu Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Optimization of material removal rate in milling of thin-walled structures using penalty cost function
- (2019) Kasper Ringgaard et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Geometrical modelling of pulsed laser ablation of high performance metallic alloys
- (2019) D. Cha et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Wire electrochemical micromachining of Ni-based metallic glass using bipolar nanosecond pulses
- (2019) Lingchao Meng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of electrolyte flow mode on characteristics of electrochemical machining with electrolyte suction tool
- (2019) Guixian Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Breakthrough phenomena in drilling micro holes by EDM
- (2019) Mattia Bellotti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Drilling force model for forced low frequency vibration assisted drilling of Ti–6Al–4V titanium alloy
- (2019) Haojun Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Study on quantitative estimation of bubble behavior in micro hole drilling with EDM
- (2019) Guodong Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of machining processes on rim zone properties and high temperature oxidation behavior of 42CrMo4
- (2019) Daniela Zander et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Fatigue Behavior of Non-Optimized Laser-Cut Medical Grade Ti-6Al-4V-ELI Sheets and the Effects of Mechanical Post-Processing
- (2019) André Reck et al. Metals
- Toward understanding of metallurgical behaviours in dry machining of hardened steel: phase transformation and surface oxidation
- (2019) Binxun Li et al. Journal of Materials Research and Technology-JMR&T
- Nanosecond pulsed laser-generated stress effect inducing macro-micro-nano structures and surface topography evolution
- (2019) Guoxin Lu et al. Applied Materials Today
- Self‐Organized Periodic Microholes Array Formation on Aluminum Surface via Femtosecond Laser Ablation Induced Incubation Effect
- (2019) Huagang Liu et al. ADVANCED FUNCTIONAL MATERIALS
- Automatic measurement of grinding-induced white layer in titanium alloys based on image processing technique
- (2019) Yong Jie Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations
- (2019) Harry Otalora-Ortega et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Aerodynamic focusing of an abrasive air jet and its effect on machining resolution
- (2019) Xiangyu Luo et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- State-of-the-art of surface integrity in machining of metal matrix composites
- (2019) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Deformation mechanism and force modelling of the grinding of YAG single crystals
- (2019) Chen Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Study on material removal mechanism of electrochemical deep grinding
- (2019) YongCheng Ge et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy
- (2019) A. Pramanik et al. INTERNATIONAL JOURNAL OF FATIGUE
- Experimental investigation of dynamic chip formation in orthogonal cutting
- (2019) Tamas G. Molnar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel cryogenic machining concept based on a lubricated liquid carbon dioxide
- (2019) Damir Grguraš et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone
- (2019) Min Wan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Condition monitoring of the feed drive system of a machine tool based on long-term operational modal analysis
- (2019) Pingjia Jia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Oscillatory behaviour in the electrochemical jet processing of titanium
- (2019) Alistair Speidel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of surface microstructures by mask electrolyte jet machining
- (2019) Ming Wu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Robust stability of milling operations based on pseudospectral approach
- (2019) David Hajdu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fundamental aspects and recent developments in metal surface polishing with energy beam irradiation
- (2019) Tiantian Deng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tool–chip thermal conductance coefficient and heat flux in machining: Theory, model and experiment
- (2019) V. Kryzhanivskyy et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Prediction of cutting forces during micro end milling considering chip thickness accumulation
- (2019) S. Wojciechowski et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C
- (2019) Guangfang Chi et al. Journal of Materials Research and Technology-JMR&T
- Experimental study of the morphological evolution of the millisecond–nanosecond combined-pulse laser ablation of aluminum alloy
- (2018) Bo-Shi Yuan et al. APPLIED OPTICS
- Femtosecond laser ablation of Al-Mg alloy in vacuum and air
- (2018) Hong-qiang Dou et al. APPLIED SURFACE SCIENCE
- Simulation and experimental investigation of inner-jet electrochemical grinding of GH4169 alloy
- (2018) Hansong LI et al. Chinese Journal of Aeronautics
- Kinetics of Passive Film Growth on 304 Stainless Steel in H2SO4 Pickling Solution under Chemical Oxidation
- (2018) Yingying Yue et al. CORROSION
- Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes
- (2018) Nicolau Iralal Morar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on process capabilities of electrochemical micromachining and its hybrid variants
- (2018) Krishna Kumar Saxena et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy
- (2018) Matthew S. Dargusch et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Electrochemical micromachining on titanium using the NaCl-containing ethylene glycol electrolyte
- (2018) Weidong Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on immersion waterjet assisted laser micromachining process
- (2018) Yufeng Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The importance of microstructure in electrochemical jet processing
- (2018) Alistair Speidel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of ultrasonic vibration on percussion drilling performance for millisecond pulsed Nd:YAG laser
- (2018) Houxiao Wang et al. OPTICS AND LASER TECHNOLOGY
- Self-cleaning effect in high quality percussion ablating of cooling hole by picosecond ultra-short pulse laser
- (2018) Wanqin Zhao et al. OPTICS AND LASERS IN ENGINEERING
- Wear performance of TiC/Fe cermet electrical discharge coatings
- (2018) Samer J. Algodi et al. WEAR
- Kinetics of Passive Film Growth on 304 Stainless Steel in H2SO4 Pickling Solution under Chemical Oxidation
- (2018) Yingying Yue et al. CORROSION
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- Defect-free TiC/Si multi-layer electrical discharge coatings
- (2018) J.W. Murray et al. MATERIALS & DESIGN
- Crystallographic texture can be rapidly determined by electrochemical surface analytics
- (2018) Alistair Speidel et al. ACTA MATERIALIA
- Ultrasonic characterization of dry and wet nanosecond laser ablation of solids
- (2018) S.I. Kudryashov et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy
- (2018) Xiao-ping Ren et al. International Journal of Minerals Metallurgy and Materials
- Comparison of percussion laser drilling quality with and without water-based ultrasonic assistance
- (2018) Houxiao Wang et al. Journal of Manufacturing Processes
- A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys
- (2018) R. Aigner et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reducing stray corrosion in jet electrochemical milling by adjusting the jet shape
- (2018) Xindi Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On establishment and validation of a new predictive model for material removal in abrasive flow machining
- (2018) Haibo Wei et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Ultrashort pulsed laser ablation of stainless steels
- (2018) V. Villerius et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanism for material removal in ultrasonic vibration helical milling of Ti 6Al 4V alloy
- (2018) Guang Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on the surface layer formed during electrochemical modification of pure iron
- (2018) Kangnan Fan et al. APPLIED SURFACE SCIENCE
- Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water
- (2018) Litao Chang et al. ACTA MATERIALIA
- Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy
- (2018) Chaojiang Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On modelling of cutting force and temperature in bone milling
- (2018) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Energy distribution modulation by mechanical design for electrochemical jet processing techniques
- (2017) Jonathon Mitchell-Smith et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A multiscale evaluation of the surface integrity in boring trepanning association deep hole drilling
- (2017) Huang Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium
- (2017) Hao Zhu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production
- (2017) Miroslav Neslušan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Erosion mechanisms during abrasive waterjet machining: Model microstructures and single particle experiments
- (2017) M. Mieszala et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation mechanism of electrical discharge TiC-Fe composite coatings
- (2017) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electrochemical Machining Properties of the Laser Rapid Formed Inconel 718 Alloy in NaNO 3 Solution
- (2017) Xindi Wang et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Microlubrication machining of 1018 steel: the effect of a biodegradable lubricant on the microstructural integrity
- (2017) Vasim A. Shaikh et al. Lubrication Science
- Nano-scale characterization of white layer in broached Inconel 718
- (2017) Zhe Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface integrity in electrochemical machining processes: An analysis on material modifications occurring during electrochemical machining
- (2017) Fritz Klocke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Electrochemical machining of titanium. Review
- (2017) A. D. Davydov et al. RUSSIAN JOURNAL OF ELECTROCHEMISTRY
- Nanosecond laser ablation of Al-Si coating on boron steel
- (2017) Fang Li et al. SURFACE & COATINGS TECHNOLOGY
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process
- (2017) Goutam Devaraya Revankar et al. Journal of Materials Research and Technology-JMR&T
- Control of the kerf size and microstructure in Inconel 738 superalloy by femtosecond laser beam cutting
- (2016) J. Wei et al. APPLIED SURFACE SCIENCE
- Atomic migration of carbon in hard turned layers of carburized bearing steel
- (2016) Vikram Bedekar et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Electrochemical Machining—mechanisms of anodic dissolution
- (2016) M.M. Lohrengel et al. ELECTROCHIMICA ACTA
- State-of-the-art in surface integrity in machining of nickel-based super alloys
- (2016) A. Thakur et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Detection of a milling-induced surface damage by the magnetic Barkhausen noise
- (2016) A. Stupakov et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Manufacturing at double the speed
- (2016) Julian M. Allwood et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Investigations of the White and Deformed Layers Close to the Turned Surface of Ti-6Al-4V
- (2016) Mickael Rancic et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ablation-cooled material removal with ultrafast bursts of pulses
- (2016) Can Kerse et al. NATURE
- A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate
- (2016) Mudimallana Goud et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Quantification of Microstructural Features and Prediction of Mechanical Properties of a Dual-Phase Ti-6Al-4V Alloy
- (2016) Dong Yang et al. Materials
- Electrochemical micromachining: An introduction
- (2016) Rebecca J Leese et al. Advances in Mechanical Engineering
- Formation mechanisms of white layers induced by hard turning of AISI 52100 steel
- (2015) S.B. Hosseini et al. ACTA MATERIALIA
- High performance cutting of advanced aerospace alloys and composite materials
- (2015) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
- (2015) J. Soltis CORROSION SCIENCE
- Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution
- (2015) Dengyong Wang et al. ELECTROCHIMICA ACTA
- High aspect ratio cutting of metals using water jet guided laser
- (2015) B. Adelmann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-scale statistical signal processing of cutting force in cutting tool condition monitoring
- (2015) Dong Gao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-channels by Nd:YAG laser beam machining: fabrication, microstructures, and micro-hardness profiles
- (2015) Naveed Ahmed et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-scale hybrid HMM for tool wear condition monitoring
- (2015) Zhirong Liao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Stochastic modelling of abrasive waterjet footprints using finite element analysis
- (2015) P. Lozano Torrubia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of energy loss mechanisms in water-jet assisted underwater laser cutting process using an analytical model
- (2015) Suvradip Mullick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Light press of sheet metal edge for reducing residual stress generated by laser cutting considering mechanical properties and intensity of residual stress
- (2015) Atsushi Maeda et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ultrafast laser processing of materials: a review
- (2015) Katherine C. Phillips et al. Advances in Optics and Photonics
- A quantitative approach to study the effect of local texture and heterogeneous plastic strain on the deformation micromechanism in RR1000 nickel-based superalloy
- (2014) S. Birosca et al. ACTA MATERIALIA
- Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent
- (2014) Sung-Long Chen et al. APPLIED SURFACE SCIENCE
- Evidence for increased incubation parameter in multi-pulse ablation of a Pt:SS alloy using a femtosecond laser at high repetition rates
- (2014) Clare McDaniel et al. APPLIED SURFACE SCIENCE
- Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes
- (2014) Fritz Klocke et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
- (2014) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Performance of laser polishing in finishing of metallic surfaces
- (2014) Evgueni V. Bordatchev et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining
- (2014) Todd M. Mower INTERNATIONAL JOURNAL OF FATIGUE
- A review of modeling and simulation of laser beam machining
- (2014) Pedram Parandoush et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy
- (2014) C. Herbert et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Cutting temperatures during hard turning—Measurements and effects on white layer formation in AISI 52100
- (2014) S.B. Hosseini et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Role of heat accumulation on the incubation effect in multi-shot laser ablation of stainless steel at high repetition rates
- (2014) Francesca Di Niso et al. OPTICS EXPRESS
- Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation
- (2014) J.W. Murray et al. SURFACE & COATINGS TECHNOLOGY
- Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
- (2014) K. Ahmmed et al. Micromachines
- Analysis and Reduction of Stray-Current Attack in Reciprocated Traveling Wire Electrochemical Machining
- (2014) Yongbin Zeng et al. Advances in Mechanical Engineering
- Effect of dry and wet ambient environment on the pulsed laser ablation of titanium
- (2013) Nisar Ali et al. APPLIED SURFACE SCIENCE
- Development of a water-jet assisted laser paint removal process
- (2013) Yuvraj K. Madhukar et al. APPLIED SURFACE SCIENCE
- On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
- (2013) Ming Chu Kong et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Underwater-laser drilling of aluminum
- (2013) Nikša Krstulović et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- FIB/TEM/EELS micro/nanometric investigations of the effects of laser ablation on the diamond/binder structure in polycrystalline diamond composites
- (2013) M. Pacella et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension
- (2012) Pichai Janmanee et al. APPLIED SURFACE SCIENCE
- Surface integrity analysis of machined Inconel 718 over multiple length scales
- (2012) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of chemical milling on low-cycle fatigue behavior of an Al–Mg–Si alloy
- (2012) Ashley D. Spear et al. CORROSION SCIENCE
- Understanding the effect of bromides on the stability of titanium oxide films based on a point defect model
- (2012) Dimitra Sazou et al. ELECTROCHIMICA ACTA
- Effect of electro discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance
- (2012) Habib Sidhom et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on surface integrity of grinding Inconel718
- (2012) C. F. Yao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of the Anode Crater Formation in Electrical Discharge Machining
- (2012) Jia Tao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy
- (2012) C.R.J. Herbert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Repair of EDM induced surface cracks by pulsed electron beam irradiation
- (2012) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- TEM study on the electrical discharge machined surface of single-crystal silicon
- (2012) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- INVESTIGATION INTO THE CHARACTERISTICS OF WHITE LAYERS PRODUCED IN A NICKEL-BASED SUPERALLOY FROM DRILLING OPERATIONS
- (2012) Christopher Herbert et al. MACHINING SCIENCE AND TECHNOLOGY
- CO2 laser cut quality of Inconel 718 nickel – based superalloy
- (2012) Ahmet Hasçalık et al. OPTICS AND LASER TECHNOLOGY
- A new TriBeam system for three-dimensional multimodal materials analysis
- (2012) McLean P. Echlin et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Is Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry (SEM/EDS) Quantitative?
- (2012) Dale E. Newbury et al. SCANNING
- Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric
- (2011) Yanzhen Zhang et al. APPLIED SURFACE SCIENCE
- Machinability and surface integrity of RR1000 nickel based superalloy
- (2011) S.L. Soo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
- (2011) Z. Pu et al. CORROSION SCIENCE
- Effect of very high cutting speeds on shearing, cutting forces and roughness in dry turning of austenitic stainless steels
- (2011) A. I. Fernández-Abia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser hole cutting into Ti-6Al-4V alloy and thermal stress analysis
- (2011) Bekir Sami Yilbas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
- (2011) Jinming Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser trepanning of a small diameter hole in titanium alloy: Temperature and stress fields
- (2011) B.S. Yilbas et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys
- (2011) Hamid Reza Bakhsheshi Rad et al. MATERIALS & DESIGN
- Drilling of Difficult-to-Cut Steel by Electrochemical Discharge Machining
- (2011) Margareta Coteaţă et al. MATERIALS AND MANUFACTURING PROCESSES
- Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium
- (2011) S.V. Zherebtsov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94
- (2011) M. Burger et al. Journal of Manufacturing Processes
- Ultra-short pulse laser ablation of metals: threshold fluence, incubation coefficient and ablation rates
- (2010) Jeppe Byskov-Nielsen et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Wire electro discharge trueing and dressing of fine grinding wheels
- (2010) A. Klink CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microscopic Observations on the Origin of Defects During Machining of Direct Aged (DA) Inconel 718 Superalloy
- (2010) G. K. Dosbaeva et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of pitting corrosion on fatigue performance of shot-peened aluminium alloy 7075-T651
- (2010) U. Zupanc et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
- (2010) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Molecular dynamics simulation of the material removal mechanism in micro-EDM
- (2010) Xiaodong Yang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper
- (2009) Travis L. Brown et al. ACTA MATERIALIA
- Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points
- (2009) D.T. Curtis et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Ion beam, focused ion beam, and plasma discharge machining
- (2009) D.M. Allen et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- An analysis of the discharge mechanism in electrochemical discharge machining of particulate reinforced metal matrix composites
- (2009) J.W. Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite
- (2009) K.M. Patel et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Aspects of material removal mechanism in plain waterjet milling on gamma titanium aluminide
- (2009) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The coating of TiC layer on the surface of nickel by electric discharge coating (EDC) with a multi-layer electrode
- (2009) Yu-Lung Hwang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Atomistic Modeling of Short Pulse Laser Ablation of Metals: Connections between Melting, Spallation, and Phase Explosion
- (2009) Leonid V. Zhigilei et al. Journal of Physical Chemistry C
- MICROSTRUCTURAL ANALYSIS AND MACHINABILITY IMPROVEMENT OF UDIMET 720 VIA CRYOGENIC MILLING
- (2009) Samuel L. Truesdale et al. MACHINING SCIENCE AND TECHNOLOGY
- Nanoscale carbide precipitation in the recast layer of a percussion laser-drilled superalloy
- (2009) Jacquelynn K.M. Garofano et al. SCRIPTA MATERIALIA
- Pulsed laser polishing of micro-milled Ti6Al4V samples
- (2009) Tyler L. Perry et al. Journal of Manufacturing Processes
- Laser ablation with short and ultrashort laser pulses: Basic mechanisms from molecular-dynamics simulations
- (2008) Laurent J. Lewis et al. APPLIED SURFACE SCIENCE
- Analysis of residual stresses induced by dry turning of difficult-to-machine materials
- (2008) J.C. Outeiro et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks
- (2008) T TAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser ablation in a liquid-confined environment using a nanosecond laser pulse
- (2008) Hyun Wook Kang et al. JOURNAL OF APPLIED PHYSICS
- The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress
- (2008) J. Kwong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of microstructural effects in a percussion laser-drilled powder metallurgy Ni-based superalloy
- (2008) Jacquelynn K. M. Garofano et al. JOURNAL OF MATERIALS SCIENCE
- Laser cutting of thick sheet metals: Residual stress analysis
- (2008) A.F.M. Arif et al. OPTICS AND LASER TECHNOLOGY
- Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration
- (2008) Lin ZHANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search