Advances in micro milling: From tool fabrication to process outcomes
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Advances in micro milling: From tool fabrication to process outcomes
Authors
Keywords
Micro milling cutters, Material removal mechanisms, Tool materials, Micro milling cutter structures, Fabrication techniques, Performances
Journal
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 160, Issue -, Pages 103670
Publisher
Elsevier BV
Online
2020-11-27
DOI
10.1016/j.ijmachtools.2020.103670
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Damage behaviors of unidirectional CFRP in orthogonal cutting: A comparison between single- and multiple-pass strategies
- (2020) Hao Nan Li et al. COMPOSITES PART B-ENGINEERING
- Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance
- (2020) Dun Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on laser-induced oxidation assisted micro-milling of Inconel 718
- (2020) Hongjun Xia et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Performance evaluation of creep feed grinding of γ-TiAl intermetallics with electroplated diamond wheels
- (2020) Xinxin XI et al. Chinese Journal of Aeronautics
- Formation mechanism of alumina layer in protecting cubic boron nitride inserts in turning cast irons
- (2020) D. Nguyen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Design, optimization and manufacturing of polycrystalline diamond micro-end-mill for micro-milling of GH4169
- (2020) Ni Chen et al. DIAMOND AND RELATED MATERIALS
- Suppressing the burr of high aspect ratio structure by optimizing the cutting parameters in the micro-milling process
- (2020) Ni Chen et al. The International Journal of Advanced Manufacturing Technology
- Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale
- (2020) Qi Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Laser processing of freeform surfaces: A new approach based on an efficient workpiece partitioning strategy
- (2020) A. Batal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface texture formation mechanism based on the ultrasonic vibration-assisted grinding process
- (2020) Jingliang Jiang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Plasma-assisted electrochemical machining of microtools and microstructures
- (2020) Shunda Zhan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Review of ultrasonic vibration-assisted machining in advanced materials
- (2020) Zhichao Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- DEM and experimental study on the ultrasonic vibration-assisted abrasive finishing of WC-8Co cemented carbide cutting edge
- (2020) Huan Qi et al. POWDER TECHNOLOGY
- Study on the oxidation of WC-Co cemented carbide under different conditions
- (2020) Xian Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Preheating assisted wire EDM of semi-conductive CFRPs: Principle and anisotropy
- (2020) Chaoqun Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant
- (2020) Teng Gao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microscopic characterization and modeling of oxide layer for electrolytic in-process dressing (ELID) grinding with focus on voltage, electrode-wheel gap, and coolant flow
- (2019) Bader Alqahtani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity
- (2019) Oriol Gavalda Diaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Research on the ploughing force in micro milling of soft-brittle crystals
- (2019) Ni Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigating the ablation depth and surface roughness of laser-induced nano-ablation of CVD diamond material
- (2019) Ni Chen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Assessment of abrasive powder behaviour during impact-abrasive wear of PCD elements
- (2019) D. Gomon et al. WEAR
- Influencing Factors and Theoretical Models for the Surface Topography in Diamond Turning Process: A Review
- (2019) Chunlei He et al. Micromachines
- Effects of WC grain size and Co content on microscale wear behavior of micro end mills in aluminum alloy 7075 machining
- (2019) Peng Gao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Adaptive vibration reshaping based milling chatter suppression
- (2019) Chenxi Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Geometrical modelling of pulsed laser ablation of high performance metallic alloys
- (2019) D. Cha et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications
- (2019) Shaojian Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Theoretical and experimental investigation of material removal mechanism in compliant shape adaptive grinding process
- (2019) Wu-Le Zhu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations
- (2019) Harry Otalora-Ortega et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- State-of-the-art of surface integrity in machining of metal matrix composites
- (2019) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Deformation mechanism and force modelling of the grinding of YAG single crystals
- (2019) Chen Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels
- (2019) Qing MIAO et al. Chinese Journal of Aeronautics
- Experimental investigation of dynamic chip formation in orthogonal cutting
- (2019) Tamas G. Molnar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone
- (2019) Min Wan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Determining the effect of tool posture on cutting force in a turn milling process using an analytical prediction model
- (2019) Koji Utsumi et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical and experimental investigations on the mechanisms of surface generation in micro grinding
- (2019) Dinesh Setti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- High-pressure synthesis of superhard and ultrahard materials
- (2019) Yann Le Godec et al. JOURNAL OF APPLIED PHYSICS
- Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests
- (2019) Y. Xiao et al. MATERIALS & DESIGN
- Interactive effect of grain size and crystal structure on deformation behavior in progressive micro-scaled deformation of metallic materials
- (2019) X.F. Tang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fundamental aspects and recent developments in metal surface polishing with energy beam irradiation
- (2019) Tiantian Deng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A unified process damping model considering the varying stiffness of the milling system
- (2019) Jia Feng et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Micro milling characteristics of LS-WEDM fabricated helical and corrugated micro end mill
- (2019) Y. Sun et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Generation of textured diamond abrasive tools by continuous-wave CO2 laser: Laser parameter effects and optimisation
- (2019) Hao Nan Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Deformation characteristics and surface generation modelling of crack-free grinding of GGG single crystals
- (2019) Chen Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces
- (2018) Bing Guo et al. CERAMICS INTERNATIONAL
- Experimental study on hybrid machining of laser irradiation and grinding for sharpening of a CVD diamond micro-milling tool
- (2018) Kaihua Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design and fabrication of a new micro ball-end mill with conical flank face
- (2018) Zhiqiang Liang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fabrication and milling performance of micro ball-end mills with different relief angles
- (2018) Zhiqiang Liang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the inverse design of discontinuous abrasive surface to lower friction-induced temperature in grinding: An example of engineered abrasive tools
- (2018) Hao Nan Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys
- (2018) Masoud Ahmadi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modeling of cutting forces in micro end-milling
- (2018) Yanjie Yuan et al. Journal of Manufacturing Processes
- Theoretical model for subsurface microstructure prediction in micro-machining Ti-6Al-4V alloy – Experimental validation
- (2018) Jinxuan Bai et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Microstructure evolution in Ti64 subjected to laser-assisted ultrasonic nanocrystal surface modification
- (2018) Jun Liu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on the surface formation mechanism in micro milling of cemented carbide
- (2018) Xian Wu et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V
- (2018) Zhiqiang Liang et al. Micromachines
- Micro tool design and fabrication: A review
- (2018) S.N.B. Oliaei et al. Journal of Manufacturing Processes
- Modeling and prediction of surface topography and surface roughness in dual-axis wheel polishing of optical glass
- (2018) Ange Lu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Ultrashort pulsed laser ablation of stainless steels
- (2018) V. Villerius et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental and simulation research on micro-milling temperature and cutting deformation of heat-resistance stainless steel
- (2017) Zhenxin Peng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of micro-mechanical cutting
- (2017) Brian Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review of helical milling process
- (2017) Robson Bruno Dutra Pereira et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Orthogonal cutting of cortical bone: Temperature elevation and fracture toughness
- (2017) Arne Feldmann et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal
- (2017) Ni Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling
- (2017) E. Salvati et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Application of dielectric barrier discharge plasma-assisted milling in energy storage materials – A review
- (2017) Liuzhang Ouyang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools
- (2017) Julius Schoop et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Impact of deep cores surface topography generated by micro milling on the demolding force in micro injection molding
- (2017) Davide Masato et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ball milling as a way to produce magnetic and magnetocaloric materials: a review
- (2017) J. S. Blázquez et al. JOURNAL OF MATERIALS SCIENCE
- Investigation on manufacturing of microtools made of tungsten carbide using wire electric discharge grinding (WEDG)
- (2017) M. Parthiban et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Laser drilling of structural ceramics—A review
- (2017) Hongjian Wang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Study of micro ball end mill geometry and measurement of cutting edge radius
- (2017) M. Baburaj et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Investigation on the burr formation mechanism in micro cutting
- (2017) Xian Wu et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Cutting surface quality analysis in micro ball end-milling of KDP crystal considering size effect and minimum undeformed chip thickness
- (2017) Ni Chen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718
- (2017) Tatsuya Sugihara et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions
- (2017) Y. Xiao et al. SCRIPTA MATERIALIA
- Single crystal CVD diamond membranes for betavoltaic cells
- (2016) C. Delfaure et al. APPLIED PHYSICS LETTERS
- An imaging system with a large depth of field based on an overlapped micro-lens array
- (2016) Kuo Pang et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Process chains for high-precision components with micro-scale features
- (2016) E. Uhlmann et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools
- (2016) Yoshinori Ogawa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Chatter suppression techniques in metal cutting
- (2016) J. Munoa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Characterization of surface graphitic electrodes made by excimer laser on CVD diamond
- (2016) M. De Feudis et al. DIAMOND AND RELATED MATERIALS
- Analytical modeling and experimental validation of residual stress in micro-end-milling
- (2016) F. Y. Peng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Origins for the size effect of surface roughness in diamond turning
- (2016) C.L. He et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting forces in micro-end-milling processes
- (2016) Xuewei Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A review of fly cutting applied to surface generation in ultra-precision machining
- (2016) S.J. Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Development of a hybrid cutting force model for micromilling of brass
- (2016) Huaizhong Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Evaluation of grinding-induced subsurface damage in optical glass BK7
- (2016) Hao Nan Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools
- (2016) Kaitao Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal
- (2016) Ni Chen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting
- (2016) Xian Wu et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti 6 Al 4 V alloy
- (2016) K. Aslantas et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Subsurface defects structural evolution in nano-cutting of single crystal copper
- (2015) Quanlong Wang et al. APPLIED SURFACE SCIENCE
- Surface and subsurface characterisation in micro-milling of monocrystalline silicon
- (2015) Dehong Huo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling and simulation of grinding wheel by discrete element method and experimental validation
- (2015) Haonan Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of tool wear on machining forces and tool deflections during micro milling
- (2015) Samad Nadimi Bavil Oliaei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Amorphization and C segregation based surface generation of Reaction-Bonded SiC/Si composites under micro-grinding
- (2015) Quanli Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Size effect and minimum chip thickness in micromilling
- (2015) Fernando Brandão de Oliveira et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical modeling and experimental validation of micro end-milling cutting forces considering edge radius and material strengthening effects
- (2015) L. Zhou et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fluid mechanics of internal flow with friction and cutting strategies for micronozzles
- (2015) Yukui Cai et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Characterisation of thermally degraded polycrystalline diamond
- (2015) Johan Ewald Westraadt et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing
- (2015) Yukui Cai et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Preparation and performance of chemical vapor deposition diamond coatings synthesized onto the cemented carbide micro-end mills with a SiC interlayer
- (2015) Hongjun Hei et al. SURFACE & COATINGS TECHNOLOGY
- An experimental study on grinding parameters for manufacturing PCD micro-milling tool
- (2014) Zhongbo Zhan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of cutting parameters on surface quality in ductile cutting of KDP crystal using self-developed micro PCD ball end mill
- (2014) Ni Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiresponse optimization of micro-wire electrical discharge machining process
- (2014) B. Kuriachen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Conservation law of surface roughness in single point diamond turning
- (2014) W.J. Zong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation of the effects of cryogenic treatment applied at different holding times to cemented carbide inserts on tool wear
- (2014) Nursel Altan Özbek et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling
- (2014) Geoff Burton et al. Journal of Manufacturing Processes
- The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of Aluminum Alloy 1100 in micro-milling operation
- (2014) G. Kiswanto et al. Journal of Manufacturing Processes
- Development of micro milling tool made of single crystalline diamond for ceramic cutting
- (2013) H. Suzuki et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Diamond CVD film formation onto WC–Co substrates using a thermally nitrided Cr diffusion-barrier
- (2013) E. Hojman et al. DIAMOND AND RELATED MATERIALS
- Definition and determination of the minimum uncut chip thickness of microcutting
- (2013) Liu Zhanqiang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Measurement and finite element simulation of micro-cutting temperatures of tool tip and workpiece
- (2013) Guang Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
- (2013) Muhammad Imran et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Grinding of PCBN cutting inserts
- (2013) B. Denkena et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Ultrahard nanotwinned cubic boron nitride
- (2013) Yongjun Tian et al. NATURE
- An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy
- (2013) İrfan Ucun et al. WEAR
- A study on the quality of micro-machined surfaces on tungsten carbide generated by PCD micro end-milling
- (2012) Kazuo Nakamoto et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Crystallographic effect on subsurface damage formation in silicon microcutting
- (2012) Jiwang Yan et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Manufacture and application of ultra-small micro end mills
- (2012) Jan C. Aurich et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- WEDM condition parameter optimization for PCD microtool geometry fabrication process and quality improvement
- (2012) Peter Fonda et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools
- (2012) Zhiyu Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Mechanistic model for prediction of cutting forces in micro end-milling and experimental comparison
- (2012) Y.V. Srinivasa et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A new model for the prediction of cutting forces in micro-end-milling operations
- (2012) P. Rodríguez et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new modeling approach for the dynamics of a micro end mill in high-speed micro-cutting
- (2012) KB Mustapha et al. JOURNAL OF VIBRATION AND CONTROL
- An Aluminum Microfluidic Chip Fabrication Using a Convenient Micromilling Process for Fluorescent Poly(DL-lactide-co-glycolide) Microparticle Generation
- (2012) Yung-Sheng Lin et al. SENSORS
- Fabrication of different geometry cutting tools and their effect on the vertical micro-grinding of BK7 glass
- (2011) Asma Perveen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Identification of factors that dominate size effect in micro-machining
- (2011) A.J Mian et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
- (2011) Hongtao Ding et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut
- (2011) A. Cuba Ramos et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of micro-milling forces with finite element method
- (2011) Xiaoliang Jin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Modeling of minimum uncut chip thickness in micro machining of aluminum
- (2011) M. Malekian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study of HPHT single crystal diamond as precision cutting tool material
- (2011) Z.Y. Wang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Robust chatter stability in micro-milling operations
- (2010) S.S. Park et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A study on the micro tooling for micro/nano milling
- (2010) Xiang Cheng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool edge radius effect on cutting temperature in micro-end-milling process
- (2010) Kai Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design and development of PCD micro straight edge end mills for micro/nano machining of hard and brittle materials
- (2010) Xiang Cheng et al. Journal of Mechanical Science and Technology
- Investigation of cutting force behaviour considering the effect of cutting edge radius in the micro-scale milling of AISI 1045 steel
- (2010) I-S Kang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Fabrication of polycrystalline diamond microtool using a Q-switched Nd:YAG laser
- (2009) C. Everson et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analyzing the performance of diamond-coated micro end mills
- (2009) C.D. Torres et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modeling of dynamic micro-milling cutting forces
- (2009) Mohammad Malekian et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining
- (2009) Chinmaya R. Dandekar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Design and development of a micro polycrystalline diamond ball end mill for micro/nano freeform machining of hard and brittle materials
- (2009) X Cheng et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Fabrication of micro end mills by wire EDM and some micro cutting tests
- (2009) Jiwang Yan et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Micro end mill tool temperature measurement and prediction
- (2009) Derek L. Wissmiller et al. Journal of Manufacturing Processes
- Modelling the cutting edge radius size effect for force prediction in micro milling
- (2008) G. Bissacco et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Development of ultra-precision machining system with unique wire EDM tool fabrication system for micro/nano-machining
- (2008) X. Cheng et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Hard turning with variable micro-geometry PcBN tools
- (2008) T. Özel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Fabrication of a micro-size diamond tool using a focused ion beam
- (2008) X Ding et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Design and manufacturing of micro milling tools
- (2008) J. Fleischer et al. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
- Size effect and tool geometry in micromilling of tool steel
- (2008) A. Aramcharoen et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Monolithic integration of micro-channel on disposable flow sensors for medical applications
- (2008) S. Billat et al. SENSORS AND ACTUATORS A-PHYSICAL
- Diamond coatings for micro end mills: Enabling the dry machining of aluminum at the micro-scale
- (2007) Patrick J. Heaney et al. DIAMOND AND RELATED MATERIALS
- Micromilling of microbarbs for medical implants
- (2007) Sinan Filiz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness
- (2007) Xinmin Lai et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The Merchant's model of orthogonal cutting revisited: A new insight into the modeling of chip formation
- (2007) A. Molinari et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now