Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges
出版年份 2021 全文链接
标题
Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges
作者
关键词
3D printing, Micro-extrusion, Direct ink writing, Personalized pharmaceuticals and medicines, 3D printed drug products and microneedles, Rheology and food printing
出版物
JOURNAL OF CONTROLLED RELEASE
Volume 332, Issue -, Pages 367-389
出版商
Elsevier BV
发表日期
2021-02-27
DOI
10.1016/j.jconrel.2021.02.027
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Three-Dimensional (3D)–Printed Zero-Order Released Platform: a Novel Method of Personalized Dosage Form Design and Manufacturing
- (2021) Dongyang Fang et al. AAPS PHARMSCITECH
- Selective Laser Sintering of Solid Oral Dosage Forms with Copovidone and Paracetamol Using a CO2 Laser
- (2021) Yanis A. Gueche et al. Pharmaceutics
- 3D-printing of solid lipid tablets from emulsion gels
- (2021) Jenny Johannesson et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed polymeric drug-eluting implants
- (2021) Athina Liaskoni et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Role of release modifiers to modulate drug release from fused deposition modelling (FDM) 3D printed tablets
- (2021) Kejing Shi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed clotrimazole intravaginal ring for the treatment of recurrent vaginal candidiasis
- (2021) Mattia Tiboni et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed spherical mini-tablets: Geometry versus composition effects in controlling dissolution from personalised solid dosage forms
- (2021) Sejad Ayyoubi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Extrusion-based 3D printing of oral solid dosage forms: Material requirements and equipment dependencies
- (2021) S. Henry et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Preparation and application of subdivided tablets using 3D printing for precise hospital dispensing
- (2020) Zijie Zheng et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Paediatric-friendly chocolate-based dosage forms for the oral administration of both hydrophilic and lipophilic drugs fabricated with extrusion-based 3D printing
- (2020) Christina Karavasili et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Simplification of fused deposition modeling 3D-printing paradigm: Feasibility of 1-step direct powder printing for immediate release dosage form production
- (2020) Marina Fanous et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Non-destructive dose verification of two drugs within 3D printed polyprintlets
- (2020) Sarah J. Trenfield et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron
- (2020) Nour Allahham et al. Pharmaceutics
- Development of Bio-Active Patches Based on Pectin for the Treatment of Ulcers and Wounds Using 3D-Bioprinting Technology
- (2020) Eleftherios G. Andriotis et al. Pharmaceutics
- 3D printing of foods: recent developments, future perspectives and challenges
- (2020) Alain Le-Bail et al. Current Opinion in Food Science
- Semi-solid extrusion 3D printing ODFs: an individual drug delivery system for small scale pharmacy
- (2020) Ting-Ting Yan et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Investigation of semi-solid formulations for 3D printing of drugs after prolonged storage to mimic real-life applications
- (2020) Ilias El Aita et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Vat photopolymerization of liquid, biodegradable PLGA-based oligomers as tissue scaffolds
- (2020) Emily M. Wilts et al. EUROPEAN POLYMER JOURNAL
- 3D printed opioid medicines with alcohol-resistant and abuse-deterrent properties
- (2020) Jun Jie Ong et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of conducting polymers
- (2020) Hyunwoo Yuk et al. Nature Communications
- Formulation Optimization of Selective Laser Sintering 3D-Printed Tablets of Clindamycin Palmitate Hydrochloride by Response Surface Methodology
- (2020) Eman M. Mohamed et al. AAPS PHARMSCITECH
- Hydrogel-Colloid Composite Bioinks for Targeted Tissue-Printing
- (2020) Raphaël Michel et al. BIOMACROMOLECULES
- A tunable extruded 3D printing platform using thermo-sensitive pastes
- (2020) Yan Yang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Screening of pharmaceutical polymers for extrusion-Based Additive Manufacturing of patient-tailored tablets
- (2020) A. Samaro et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of high drug loading levetiracetam tablets using semi-solid extrusion 3D printing
- (2020) Mengsuo Cui et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Fabrication of 3D-Printed Fish-Gelatin-Based Polymer Hydrogel Patches for Local Delivery of PEGylated Liposomal Doxorubicin
- (2020) Jin Liu et al. Marine Drugs
- Recent Advances in Formulating and Processing Biomaterial Inks for Vat Polymerization‐Based 3D Printing
- (2020) Wanlu Li et al. Advanced Healthcare Materials
- An Overview of Material Extrusion Troubleshooting
- (2020) Giselle Hsiang Loh et al. Applied Sciences-Basel
- 3D printed tacrolimus suppositories for the treatment of ulcerative colitis
- (2020) Iria Seoane-Viaño et al. Asian Journal of Pharmaceutical Sciences
- 3D Printed Drug Delivery Systems Based on Natural Products
- (2020) Ángela Aguilar-de-Leyva et al. Pharmaceutics
- Orodispersible Polymer Films with the Poorly Water-Soluble Drug, Olanzapine: Hot-Melt Pneumatic Extrusion for Single-Process 3D Printing
- (2020) Hui-Won Cho et al. Pharmaceutics
- Pharmaceutical Applications of 3D Printing
- (2020) Grona Chen et al. Additive Manufacturing
- Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars used for 3D printing
- (2020) Mohammad Amin Moeini et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printed gummies: Personalized drug dosage in a safe and appealing way
- (2020) Helena Herrada-Manchón et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Design of novel oral ricobendazole formulation applying melting solidification printing process (MESO-PP): An innovative solvent-free alternative method for 3D printing using a simplified concept and low temperature
- (2020) Juan Pablo Real et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- The potential of Streptococcus salivarius oral films in the management of dental caries: an inkjet printing approach
- (2020) Cornelius C. Dodoo et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
- (2020) Xiaoyan Xu et al. JOURNAL OF CONTROLLED RELEASE
- Rheological behavior, 3D printability and the formation of scaffolds with cellulose nanocrystals/gelatin hydrogels
- (2020) Yani Jiang et al. Journal of Materials Science
- Development of 3D Printed Drug-Eluting Scaffolds for Preventing Piercing Infection
- (2020) Emad Naseri et al. Pharmaceutics
- 3D-Printing with precise layer-wise dose adjustments for paediatric use via pressure-assisted microsyringe printing
- (2020) Ilias El Aita et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Printability, microstructure, and flow dynamics of phase-separated edible 3D inks
- (2020) Sara M. Oliveira et al. FOOD HYDROCOLLOIDS
- Oral preparations with tunable dissolution behavior based on selective laser sintering technique
- (2020) Yan Yang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D-printing of lopinavir printlets by selective laser sintering and quantification of crystalline fraction by XRPD-chemometric models
- (2020) Rania Hamed et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment
- (2020) Atabak Ghanizadeh Tabriz et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of extended-release tablets of theophylline using hydroxypropyl methylcellulose (HPMC) hydrogels
- (2020) Yiliang Cheng et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Indirect prediction of 3D printability of mashed potatoes based on LF-NMR measurements
- (2020) Zhenbin Liu et al. JOURNAL OF FOOD ENGINEERING
- Stability of 3D printing using a mixture of pea protein and alginate: Precision and application of additive layer manufacturing simulation approach for stress distribution
- (2020) Timilehin Martins Oyinloye et al. JOURNAL OF FOOD ENGINEERING
- A rheological approach to 3D printing of plasma protein based doughs
- (2020) Estefanía Álvarez-Castillo et al. JOURNAL OF FOOD ENGINEERING
- Assisted 3D printing of microneedle patches for minimally invasive glucose control in diabetes
- (2020) Mingxin Wu et al. Materials Science & Engineering C-Materials for Biological Applications
- Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery
- (2020) Xiaoyan Xu et al. Materials Science & Engineering C-Materials for Biological Applications
- I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
- (2020) Patricija Januskaite et al. Pharmaceutics
- 3D-Printed Veterinary Dosage Forms—A Comparative Study of Three Semi-Solid Extrusion 3D Printers
- (2020) Erica Sjöholm et al. Pharmaceutics
- 3D Printed Tacrolimus Rectal Formulations Ameliorate Colitis in an Experimental Animal Model of Inflammatory Bowel Disease
- (2020) Iria Seoane-Viaño et al. Biomedicines
- 3D printing of gummy drug formulations composed of gelatin and an HPMC-based hydrogel for pediatric use
- (2020) Tatsuaki Tagami et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
- (2019) Tao Jiang et al. Applied Physics Reviews
- Lipids and polymers in pharmaceutical technology: Lifelong companions
- (2019) Juergen Siepmann et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Self-Emulsifying Oral Lipid Drug Delivery Systems: Advances and Challenges
- (2019) Sarita Rani et al. AAPS PHARMSCITECH
- Hydroxypropyl-β-cyclodextrin-based fast dissolving carbamazepine printlets prepared by semisolid extrusion 3D printing
- (2019) Jaime Conceição et al. CARBOHYDRATE POLYMERS
- A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics
- (2019) Kapilkumar Vithani et al. PHARMACEUTICAL RESEARCH
- 3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
- (2019) Nadav Noor et al. Advanced Science
- Drop-On-Powder 3D Printing of Tablets with an Anti-Cancer Drug, 5-Fluorouracil
- (2019) Kejing Shi et al. Pharmaceutics
- Additive manufacturing of personalized orodispersible warfarin films
- (2019) Erica Sjöholm et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Two-component cross-linkable gels for fabrication of solid oral dosage forms
- (2019) Tsuf Croitoru-Sadger et al. JOURNAL OF CONTROLLED RELEASE
- Towards Printed Pediatric Medicines in Hospital Pharmacies: Comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets
- (2019) Heidi Öblom et al. Pharmaceutics
- Flexible Electrochemical Bioelectronics: The Rise of In Situ Bioanalysis
- (2019) You Yu et al. ADVANCED MATERIALS
- Shaping the future: recent advances of 3D printing in drug delivery and healthcare
- (2019) Sarah J Trenfield et al. Expert Opinion on Drug Delivery
- Extrusion 3D printing of nutraceutical oral dosage forms formulated with monoglycerides oleogels and phytosterols mixtures
- (2019) Ivana M. Cotabarren et al. FOOD RESEARCH INTERNATIONAL
- Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
- (2019) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Track-and-trace: Novel anti-counterfeit measures for 3D printed personalized drug products using smart material inks
- (2019) Sarah J. Trenfield et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
- (2019) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Gastric floating sustained-release tablet for dihydromyricetin: Development, characterization, and pharmacokinetics study
- (2019) Hao Liu et al. SAUDI PHARMACEUTICAL JOURNAL
- Designing hydrocolloid based food-ink formulations for extrusion 3D printing
- (2019) Azarmidokht Gholamipour-Shirazi et al. FOOD HYDROCOLLOIDS
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- Chocolate-based Ink Three-dimensional Printing (Ci3DP)
- (2019) Rahul Karyappa et al. Scientific Reports
- Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics
- (2019) Katarzyna Rycerz et al. Pharmaceutics
- Thermal Extrusion 3D Printing for the Fabrication of Puerarin Immediate-Release Tablets
- (2019) Pingfei Li et al. AAPS PHARMSCITECH
- Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
- (2019) Zhuqing Wan et al. Acta Biomaterialia
- Zinc oxide/clove essential oil incorporated type B gelatin nanocomposite formulations: A proof-of-concept study for 3D printing applications
- (2019) Jasim Ahmed et al. FOOD HYDROCOLLOIDS
- Incorporation of probiotics (Bifidobacterium animalis subsp. Lactis) into 3D printed mashed potatoes: Effects of variables on the viability
- (2019) Zhenbin Liu et al. FOOD RESEARCH INTERNATIONAL
- Extrusion-based 3D printing of food pastes: Correlating rheological properties with printing behaviour
- (2019) Sicong Zhu et al. Innovative Food Science & Emerging Technologies
- 3D printing of multilayered orodispersible films with in-process drying
- (2019) Jan Elbl et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
- (2018) Milena Nadgorny et al. ACS Applied Materials & Interfaces
- 3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
- (2018) Xiao Kuang et al. ACS Applied Materials & Interfaces
- 3D Printed Functional and Biological Materials on Moving Freeform Surfaces
- (2018) Zhijie Zhu et al. ADVANCED MATERIALS
- A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform
- (2018) Shweta Agarwala et al. BIOSENSORS & BIOELECTRONICS
- 3D printed, controlled release, tritherapeutic tablet matrix for advanced anti-HIV-1 drug delivery
- (2018) Margaret Siyawamwaya et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D bioprinting of a corneal stroma equivalent
- (2018) Abigail Isaacson et al. EXPERIMENTAL EYE RESEARCH
- Physical properties of 3D printed baking dough as affected by different compositions
- (2018) Fan Yang et al. Innovative Food Science & Emerging Technologies
- Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
- (2018) Qijun Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D extrusion printing of high drug loading immediate release paracetamol tablets
- (2018) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- QR encoded smart oral dosage forms by inkjet printing
- (2018) Magnus Edinger et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed UV light cured polydimethylsiloxane devices for drug delivery
- (2018) Jenny Holländer et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Extrusion-based food printing for digitalized food design and nutrition control
- (2018) Jie Sun et al. JOURNAL OF FOOD ENGINEERING
- Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters
- (2018) Fanli Yang et al. LWT-FOOD SCIENCE AND TECHNOLOGY
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- Addressing Unmet Clinical Needs with 3D Printing Technologies
- (2018) Udayan Ghosh et al. Advanced Healthcare Materials
- Programming of Multicomponent Temporal Release Profiles in 3D Printed Polypills via Core-Shell, Multilayer, and Gradient Concentration Profiles
- (2018) Alexander P. Haring et al. Advanced Healthcare Materials
- Personalized orodispersible films by hot melt ram extrusion 3D printing
- (2018) Umberto M. Musazzi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of naftopidil-loaded tablets using a semi-solid extrusion-type 3D printer, and the characteristics of the printed hydrogel and resulting tablets
- (2018) Tatsuaki Tagami et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
- (2018) Chad Duty et al. Journal of Manufacturing Processes
- On-demand manufacturing of immediate release levetiracetam tablets using pressure-assisted microsyringe printing
- (2018) Ilias El Aita et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Powder bed 3D-printing of highly loaded drug delivery devices with hydroxypropyl cellulose as solid binder
- (2018) Sophia Infanger et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of mechanistic models to identify critical formulation and process variables of pastes for 3D printing of modified release tablets
- (2018) Ahmed Zidan et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Extrudability analysis of drug loaded pastes for 3D printing of modified release tablets
- (2018) Ahmed Zidan et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Exploration and Preparation of a Dose-Flexible Regulation System for Levetiracetam Tablets via Novel Semi-Solid Extrusion Three-Dimensional Printing
- (2018) Mengsuo Cui et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
- (2018) Kapilkumar Vithani et al. PHARMACEUTICAL RESEARCH
- 3D printing for chemical, pharmaceutical and biological applications
- (2018) Andrew J. Capel et al. Nature Reviews Chemistry
- Effect of novel internal structures on printability and drug release behavior of 3D printed tablets
- (2018) Mengsuo Cui et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- ‘Temporary Plasticiser’: A novel solution to fabricate 3D printed patient-centred cardiovascular ‘Polypill’ architectures
- (2018) Beatriz C. Pereira et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of tablets using inkjet with UV photoinitiation
- (2017) Elizabeth A. Clark et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Overview of solidification techniques for self-emulsifying drug delivery systems from industrial perspective
- (2017) J. Mandić et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
- (2017) Mary Kyobula et al. JOURNAL OF CONTROLLED RELEASE
- Visualization and Non-Destructive Quantification of Inkjet-Printed Pharmaceuticals on Different Substrates Using Raman Spectroscopy and Raman Chemical Imaging
- (2017) Magnus Edinger et al. PHARMACEUTICAL RESEARCH
- Current advances and future perspectives in extrusion-based bioprinting
- (2016) Ibrahim T. Ozbolat et al. BIOMATERIALS
- Pharmaceutical excipients — quality, regulatory and biopharmaceutical considerations
- (2016) David P. Elder et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Overview on gastroretentive drug delivery systems for improving drug bioavailability
- (2016) Carla M. Lopes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- A 3D-printed local drug delivery patch for pancreatic cancer growth suppression
- (2016) Hee-Gyeong Yi et al. JOURNAL OF CONTROLLED RELEASE
- 3d printing technologies applied for food design: Status and prospects
- (2016) Fernanda C. Godoi et al. JOURNAL OF FOOD ENGINEERING
- Robocasting of structural ceramic parts with hydrogel inks
- (2016) Ezra Feilden et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D printed bionic nanodevices
- (2016) Yong Lin Kong et al. Nano Today
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- 4D Bioprinting for Biomedical Applications
- (2016) Bin Gao et al. TRENDS IN BIOTECHNOLOGY
- Randomized Comparative Bioavailability of a Novel Three-Dimensional Printed Fast-Melt Formulation of Levetiracetam Following the Administration of a Single 1000-mg Dose to Healthy Human Volunteers Under Fasting and Fed Conditions
- (2016) Sophie Boudriau et al. Drugs in research & development
- Human Skin 3D Bioprinting Using Scaffold-Free Approach
- (2016) Léa J. Pourchet et al. Advanced Healthcare Materials
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of tablets containing multiple drugs with defined release profiles
- (2015) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
- (2015) Andreas Blaeser et al. Advanced Healthcare Materials
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- Patient-Centered Pharmaceutical Design to Improve Acceptability of Medicines: Similarities and Differences in Paediatric and Geriatric Populations
- (2014) Fang Liu et al. DRUGS
- Fused-filament 3D printing (3DP) for fabrication of tablets
- (2014) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D Printed Quantum Dot Light-Emitting Diodes
- (2014) Yong Lin Kong et al. NANO LETTERS
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells
- (2013) B. Duan et al. Acta Biomaterialia
- Desktop 3D printing of controlled release pharmaceutical bilayer tablets
- (2013) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D Printed Bionic Ears
- (2013) Manu S. Mannoor et al. NANO LETTERS
- Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
- (2012) Xiaofeng Cui et al. TISSUE ENGINEERING PART A
- Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
- (2011) Jacob J. Adams et al. ADVANCED MATERIALS
- Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
- (2009) B. Y. Ahn et al. SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search