Modelling of Spouted and Spout-Fluid Beds: Key for Their Successful Scale Up
Published 2017 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Modelling of Spouted and Spout-Fluid Beds: Key for Their Successful Scale Up
Authors
Keywords
-
Journal
Energies
Volume 10, Issue 11, Pages 1729
Publisher
MDPI AG
Online
2017-10-31
DOI
10.3390/en10111729
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Hydrogen-rich gas production by continuous pyrolysis and in-line catalytic reforming of pine wood waste and HDPE mixtures
- (2017) Aitor Arregi et al. ENERGY CONVERSION AND MANAGEMENT
- An advanced evaluation of spouted beds scale-up for coating TRISO nuclear fuel particles using Radioactive Particle Tracking (RPT)
- (2017) Neven Ali et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Evaluation of the dimensionless groups based scale-up of gas–solid spouted beds
- (2017) Shreekanta Aradhya et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- Three-dimensional CFD study of conical spouted beds containing heavy particles: Design parameters
- (2017) Naimeh Setarehshenas et al. KOREAN JOURNAL OF CHEMICAL ENGINEERING
- Modeling of spout-fluidized beds and investigation of drag closures using OpenFOAM
- (2017) Linmin Li et al. POWDER TECHNOLOGY
- CFD-DEM study on cohesive particles in a spouted bed
- (2017) Huibin Xu et al. POWDER TECHNOLOGY
- CFD-DEM modeling of a three-dimensional prismatic spouted bed
- (2017) Swantje Pietsch et al. POWDER TECHNOLOGY
- Discrete element method for the prediction of the onset velocity in a spouted bed
- (2017) Filippo Marchelli et al. POWDER TECHNOLOGY
- Using dilute spouting for fabrication of highly filled metal-polymer composite materials
- (2017) E. Eichner et al. POWDER TECHNOLOGY
- DEM simulation of wet granular-fluid flows in spouted beds: Numerical studies and experimental verifications
- (2017) Huang Zhang et al. POWDER TECHNOLOGY
- Mixing behaviors in an industrial-scale spout-fluid mixer by 3D CFD-TFM
- (2017) Xuejiao Liu et al. POWDER TECHNOLOGY
- Experimental study and transient CFD/DEM simulation in a fluidized bed based on different drag models
- (2017) Ling Zhou et al. RSC Advances
- CFD simulation of transient gas to particle heat transfer for fluidized and spouted regimes
- (2016) Mohsen Fattahi et al. APPLIED THERMAL ENGINEERING
- Cylindrical-conical spouted bed dynamics: Laminar and turbulent flow predictions
- (2016) Md. Omar Reza et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Numerical and experimental investigation of hydrodynamic characteristics of a slot-rectangular spouted bed
- (2016) Maysam Saidi et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- CFD modeling of conical spouted beds for processing LDPE/Al composite
- (2016) J.L.Z. Melo et al. CHEMICAL ENGINEERING AND PROCESSING
- Electrochemical regeneration of a graphite adsorbent loaded with Acid Violet 17 in a spouted bed reactor
- (2016) Dun Liu et al. CHEMICAL ENGINEERING JOURNAL
- Comparison of DEM simulation and experiments in a dual-column slot-rectangular spouted bed with a suspended partition
- (2016) Ziliang Wang et al. CHEMICAL ENGINEERING JOURNAL
- Numerical investigation on the effect of draft plates on spouting stability and gas–solid characteristics in a spout-fluid bed
- (2016) Shiliang Yang et al. CHEMICAL ENGINEERING SCIENCE
- Influence of operating parameters and flow regime on solid dispersion behavior in a gas–solid spout-fluid bed
- (2016) Shiliang Yang et al. CHEMICAL ENGINEERING SCIENCE
- CFD simulation of dense particulate reaction system: Approaches, recent advances and applications
- (2016) Wenqi Zhong et al. CHEMICAL ENGINEERING SCIENCE
- Drying kinetics and product quality of green soybean under different microwave drying methods
- (2016) Xiaohuang Cao et al. DRYING TECHNOLOGY
- Assessment of steam gasification kinetics of the char from lignocellulosic biomass in a conical spouted bed reactor
- (2016) Gartzen Lopez et al. ENERGY
- Characterization of Scaling Laws in Computational Fluid Dynamics Simulations of Spouted Fluidized Beds for Chemical Looping Combustion
- (2016) Subhodeep Banerjee et al. ENERGY & FUELS
- Neuro-fuzzy model based on digital images for the monitoring of coffee bean color during roasting in a spouted bed
- (2016) Luis Virgen-Navarro et al. EXPERT SYSTEMS WITH APPLICATIONS
- Thermal and thermo-oxidative characterisation of rice straw for its use in energy valorisation processes
- (2016) C. Moliner et al. FUEL
- Thermo-oxidative characterisation of the residues from persimmon harvest for its use in energy recovery processes
- (2016) C. Moliner et al. FUEL PROCESSING TECHNOLOGY
- Characterization of the bio-oil obtained by fast pyrolysis of sewage sludge in a conical spouted bed reactor
- (2016) J. Alvarez et al. FUEL PROCESSING TECHNOLOGY
- Correlation for Calculating Heat Transfer Coefficient in Conical Spouted Beds
- (2016) Juan F. Saldarriaga et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Impacts of solid-phase wall boundary condition on CFD simulation of conical spouted beds containing heavy zirconia particles
- (2016) N. Setarehshenas et al. Journal of the Taiwan Institute of Chemical Engineers
- Minimum spouting velocity for conical spouted beds of vegetable waste biomasses
- (2016) Juan F. Saldarriaga et al. Journal of the Taiwan Institute of Chemical Engineers
- CFD Study of hydrodynamic and heat transfer in a 2D spouted bed: Assessment of radial distribution function
- (2016) Seyyed Hossein Hosseini et al. Journal of the Taiwan Institute of Chemical Engineers
- Spouted bed drying of papaya seeds for oil production
- (2016) Daniel Padoin Chielle et al. LWT-FOOD SCIENCE AND TECHNOLOGY
- Comparison of three different CFD methods for dense fluidized beds and validation by a cold flow experiment
- (2016) Alexander Stroh et al. Particuology
- Viscoelastic and dielectric properties of composites of poly(vinyl butyral) and alumina particles with a high filling degree
- (2016) Ulrich A. Handge et al. POLYMER
- Computational evaluation of depth effect on the hydrodynamics of slot-rectangular spouted bed
- (2016) Kunzan Qiu et al. POWDER TECHNOLOGY
- Numerical investigation of particle mixing and segregation in spouted beds with binary mixtures of particles
- (2016) Wei Du et al. POWDER TECHNOLOGY
- Simulation of oil shale semi-coke particle cold transportation in a spouted bed using CPFD method
- (2016) Lidong Zhang et al. POWDER TECHNOLOGY
- DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and Applications
- (2016) Wenqi Zhong et al. POWDER TECHNOLOGY
- CFD simulations of gas–liquid–solid flow in fluidized bed reactors — A review
- (2016) Hui Pan et al. POWDER TECHNOLOGY
- Preparation of adsorbents from sewage sludge pyrolytic char by carbon dioxide activation
- (2016) Jon Alvarez et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Stability of cashew apple juice in powder dehydrated in spouted bed
- (2016) Sanyelle L. Sousa et al. Revista Brasileira de Engenharia Agrícola e Ambiental
- Prediction of equilibrium mixing state in binary particle spouted beds: Effects of solids density and diameter differences, gas velocity, and bed aspect ratio
- (2015) Hossein Karimi et al. ADVANCED POWDER TECHNOLOGY
- Mathematical modeling of polyethylene terephthalate pyrolysis in a spouted bed
- (2015) Arezou Niksiar et al. AICHE JOURNAL
- Transient reacting flow simulation of spouted fluidized bed for coal-direct chemical looping combustion with different Fe-based oxygen carriers
- (2015) Subhodeep Banerjee et al. APPLIED ENERGY
- Fast pyrolysis of eucalyptus waste in a conical spouted bed reactor
- (2015) Maider Amutio et al. BIORESOURCE TECHNOLOGY
- Numerical simulation of gas-solid heat transfer behaviour in rectangular spouted bed
- (2015) Chunhua Wang et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Sewage sludge valorization by flash pyrolysis in a conical spouted bed reactor
- (2015) Jon Alvarez et al. CHEMICAL ENGINEERING JOURNAL
- Preparation of zinc coated PMMA using solid precursor by gliding arc discharge
- (2015) Warit Ua-amnueychai et al. CHEMICAL ENGINEERING JOURNAL
- Deposition of diversely textured buffer pyrolytic carbon layer in TRISO coated particle by controlled manipulation of spouted bed hydrodynamics
- (2015) P.K. Mollick et al. CHEMICAL ENGINEERING SCIENCE
- An offset-method for Euler–Lagrange approach
- (2015) Falah Alobaid CHEMICAL ENGINEERING SCIENCE
- CFD Simulations of Hydrodynamics of Conical Spouted Bed Nuclear Fuel Coaters
- (2015) Senem Şentürk Lüle et al. CHEMICAL VAPOR DEPOSITION
- Comparison of numerical simulations and experiments in conical gas–solid spouted bed
- (2015) Shuyan Wang et al. CHINESE JOURNAL OF CHEMICAL ENGINEERING
- Coupling of smoothed particle hydrodynamics and finite volume method for two-dimensional spouted beds
- (2015) Fuzhen Chen et al. COMPUTERS & CHEMICAL ENGINEERING
- Control of the Moisture Content of Milk Powder Produced in a Spouted Bed Dryer Using a Grey-Box Inferential Controller
- (2015) Gustavo Nakamura Alves Vieira et al. DRYING TECHNOLOGY
- Fluid Dynamic Behavior in a Spouted Bed with Binary Mixtures Differing in Size
- (2015) K. G. Santos et al. DRYING TECHNOLOGY
- Production and spouted bed drying of acerola juice containing oligosaccharides
- (2015) Antônia Daiana A. Araújo et al. FOOD AND BIOPRODUCTS PROCESSING
- Fast co-pyrolysis of sewage sludge and lignocellulosic biomass in a conical spouted bed reactor
- (2015) Jon Alvarez et al. FUEL
- Performance of a conical spouted bed pilot plant for bio-oil production by poplar flash pyrolysis
- (2015) Jon Makibar et al. FUEL PROCESSING TECHNOLOGY
- Influence of Hot Bed Spray Dryer Parameters on Physical Properties of Peppermint (Mentha piperita L.) Tea Powder
- (2015) Mohsen Fakher Dizaji et al. International Journal of Food Engineering
- Simulated configurational temperature of particles and a model of constitutive relations of rapid-intermediate-dense granular flow based on generalized granular temperature
- (2015) Liyan Sun et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- Investigation of the performance of a batch air spouting bed in conducting ion exchange reactions involving heavy metal removal
- (2015) A.S. Darwish et al. Journal of the Taiwan Institute of Chemical Engineers
- Three-dimensional multi-phase simulation of the mixing and segregation of binary particle mixtures in a two-jet spout fluidized bed
- (2015) Xiaojia Wang et al. Particuology
- Experimental and numerical investigations of a pseudo-2D spout fluidized bed with draft plates
- (2015) Vinayak S. Sutkar et al. POWDER TECHNOLOGY
- A particle–grid method for Euler–Lagrange approach
- (2015) Falah Alobaid POWDER TECHNOLOGY
- Numerical study of a lab-scale double slot-rectangular spouted bed with the parallel CFD–DEM coupling approach
- (2015) Shiliang Yang et al. POWDER TECHNOLOGY
- Characterization and CFD-DEM modelling of a prismatic spouted bed
- (2015) Vitalij Salikov et al. POWDER TECHNOLOGY
- Hydrodynamic investigation of gas-solid flow in rectangular spout-fluid bed using CFD-DEM modeling
- (2015) Maysam Saidi et al. POWDER TECHNOLOGY
- Hydrodynamics studies of a pseudo 2D rectangular spouted bed by CFD
- (2015) Seyyed Hossein Hosseini et al. POWDER TECHNOLOGY
- Investigation of fluidization behavior of high density particle in spouted bed using CFD–DEM coupling method
- (2015) Malin Liu et al. POWDER TECHNOLOGY
- Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
- (2015) Maite Artetxe et al. WASTE MANAGEMENT
- Influence of Hot Bed Spray Dryer Parameters on Physical Properties of Peppermint (Mentha piperita L.) Tea Powder
- (2015) Mohsen Fakher Dizaji et al. International Journal of Food Engineering
- Transient Reacting Flow Simulation of Spouted Fluidized Bed for Coal-Direct Chemical Looping Combustion
- (2015) Subhodeep Banerjee et al. Journal of Thermal Science and Engineering Applications
- Catalytic pyrolysis of miscanthus × giganteus in a spouted bed reactor
- (2014) Shoucheng Du et al. BIORESOURCE TECHNOLOGY
- Simulation of gas-solid flow in rectangular spouted bed by coupling CFD-DEM and LES
- (2014) Chunhua Wang et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Cold flow experimental study and computer simulations of a compact spouted bed reactor
- (2014) Panagiotis N. Kechagiopoulos et al. CHEMICAL ENGINEERING AND PROCESSING
- Conical spouted bed combustor for clean valorization of sludge wastes from paper industry to generate energy
- (2014) María J. San José et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Kinetic modelling of the cracking of HDPE pyrolysis volatiles on a HZSM-5 zeolite based catalyst
- (2014) M. Artetxe et al. CHEMICAL ENGINEERING SCIENCE
- Microwave-Assisted Pulse-Spouted Vacuum Drying of Apple Cubes
- (2014) Kebitsamang Joseph Mothibe et al. DRYING TECHNOLOGY
- Production of Crispy Granules of Fish: A Comparative Study of Alternate Drying Techniques
- (2014) Fengjie Chen et al. DRYING TECHNOLOGY
- Optimization of Potato Cube Drying in a Microwave-Assisted Pulsed Spouted Bed
- (2014) Yi Lu et al. DRYING TECHNOLOGY
- Comparison of Drying Characteristics and Quality of Shiitake Mushrooms (Lentinus edodes) Using Different Drying Methods
- (2014) Lin-Lin Qi et al. DRYING TECHNOLOGY
- Slot-Rectangular Spouted Bed: Hydrodynamic Stability and Effects of Operating Conditions on Drying Performance
- (2014) Matheus B. Braga et al. DRYING TECHNOLOGY
- Numerical Investigation on Effect of Food Particle Mass on Spout Elevation of a Gas–Particle Spout Fluidized Bed in a Microwave–Vacuum Dryer
- (2014) Guangyuan Jin et al. DRYING TECHNOLOGY
- Equivalent Reactor Network Model for Simulating the Air Gasification of Polyethylene in a Conical Spouted Bed Gasifier
- (2014) Yupeng Du et al. ENERGY & FUELS
- Transient Simulations of Spouted Fluidized Bed for Coal-Direct Chemical Looping Combustion
- (2014) Zheming Zhang et al. ENERGY & FUELS
- Conical spouted bed drying of Baker's yeast: Experimentation and multi-modeling
- (2014) L. Spreutels et al. FOOD RESEARCH INTERNATIONAL
- Hydrodynamic study of a multiphase spouted column
- (2014) Jaime Riera et al. FUEL
- The effects of operational parameters on the electrochemical removal of cadmium ion from dilute aqueous solutions
- (2014) Elaheh Baghban et al. HYDROMETALLURGY
- Numerical study on spout elevation of a gas-particle spout fluidized bed in microwave-vacuum dryer
- (2014) Guangyuan Jin et al. JOURNAL OF FOOD ENGINEERING
- CFD study of particle velocity profiles inside a draft tube in a cylindrical spouted bed with conical base
- (2014) Seyyed Hossein Hosseini et al. Journal of the Taiwan Institute of Chemical Engineers
- A novel hydrodynamic model for conical spouted beds based on streamtube modeling approach
- (2014) Arezou Niksiar et al. POWDER TECHNOLOGY
- Investigation of flat bottomed spouted bed with multiple jets using DEM–CFD framework
- (2014) Surya Deb et al. POWDER TECHNOLOGY
- Study on gas-solid flow behaviors in a spouted bed at elevated pressure: Numerical simulation aspect
- (2014) Xiaofeng Jiang et al. POWDER TECHNOLOGY
- A comparative study on the influence of the gas flow rate on the hydrodynamics of a gas–solid spouted fluidized bed using Euler–Euler and Euler–Lagrange/DEM models
- (2014) Naser Almohammed et al. POWDER TECHNOLOGY
- Challenges of DEM: I. Competing bottlenecks in parallelization of gas–solid flows
- (2014) Peiyuan Liu et al. POWDER TECHNOLOGY
- Challenges of DEM: II. Wide particle size distributions
- (2014) Kyle J. Berger et al. POWDER TECHNOLOGY
- Comparison of DEM results and Lagrangian experimental data for the flow and mixing of granules in a rotating drum
- (2013) Ebrahim Alizadeh et al. AICHE JOURNAL
- Computational fluid dynamics validation and comparison analysis of scale-up relationships of spouted beds
- (2013) Wei Du et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- CFD simulation of flow regime maps in a slot-rectangular spouted bed
- (2013) Seyed Alireza Tabatabaei et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Prediction of minimum spouting velocity of spouted bed by CFD-TFM: Scale-up
- (2013) Wenqi Zhong et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Stability of slot-rectangular spouted beds with multiple slots
- (2013) Zhiwei Chen et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- An overview on the recent advances in computational fluid dynamics simulation of spouted beds
- (2013) Xiaojun Bao et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Prediction of minimum spouting velocity by CFD-TFM: Approach development
- (2013) Xuejiao Liu et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Interactions of spout jets in a multiple-spouted bed
- (2013) Dailin Chen et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Numerical simulation of spouting of cylindroid particles in a spouted bed
- (2013) Bing Ren et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- CFD-DEM simulation of the spout-annulus interaction in a 3D spouted bed with a conical base
- (2013) Shiliang Yang et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- LES-Lagrangian modelling on gasification of combustible solid waste in a spouted bed
- (2013) Jun Xie et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Neuronal and grey modelling of milk drying in spouted bed
- (2013) Bruna de Souza Nascimento et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Evaluation on the effect of conical geometry on flow behaviours in spouted beds
- (2013) Xuejiao Liu et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Parallel CFD–DEM modeling of the hydrodynamics in a lab-scale double slot-rectangular spouted bed with a partition plate
- (2013) Shiliang Yang et al. CHEMICAL ENGINEERING JOURNAL
- Influence of operating conditions on the steam gasification of biomass in a conical spouted bed reactor
- (2013) Aitziber Erkiaga et al. CHEMICAL ENGINEERING JOURNAL
- Thermal exploitation of fruit tree pruning wastes in a novel conical spouted bed combustor
- (2013) María J. San José et al. CHEMICAL ENGINEERING JOURNAL
- Cycle time in draft tube conical spouted bed dryer for sludge from paper industry
- (2013) María J. San José et al. CHEMICAL ENGINEERING SCIENCE
- Numerical investigations of a pseudo-2D spout fluidized bed with draft plates using a scaled discrete particle model
- (2013) Vinayak S. Sutkar et al. CHEMICAL ENGINEERING SCIENCE
- CFD design of a sorber for CO2 capture with 75 and 375 mircron particles
- (2013) Pilaiwan Chaiwang et al. CHEMICAL ENGINEERING SCIENCE
- Novel, highly-filled ceramic–polymer composites synthesized by a spouted bed spray granulation process
- (2013) M.F.H. Wolff et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Development and test of CFD–DEM model for complex geometry: A coupling algorithm for Fluent and DEM
- (2013) Daoyin Liu et al. COMPUTERS & CHEMICAL ENGINEERING
- Analysis of Energy Consumption in a Combined Microwave–hot Air Spouted Bed Drying of Biomaterial: Coffee Beans
- (2013) W. Jindarat et al. EXPERIMENTAL HEAT TRANSFER
- Steam gasification of biomass in a conical spouted bed reactor with olivine and γ-alumina as primary catalysts
- (2013) Aitziber Erkiaga et al. FUEL PROCESSING TECHNOLOGY
- Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach
- (2013) Shiliang Yang et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Particle Dispersion and Circulation Patterns in a 3D Spouted Bed with or without Draft Tube
- (2013) Kun Luo et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Optimization design of the coating furnace by 3-d simulation of spouted bed dynamics in the coater
- (2013) Malin Liu et al. NUCLEAR ENGINEERING AND DESIGN
- Numerical simulation of gas–solid flow with two fluid model in a spouted-fluid bed
- (2013) Shuyan Wang et al. Particuology
- Intelligent prediction of minimum spouting velocity of spouted bed by back propagation neural network
- (2013) Wenqi Zhong et al. POWDER TECHNOLOGY
- DEM–CFD analysis of fluidization behavior of Geldart Group A particles using a dynamic adhesion force model
- (2013) Tomonari Kobayashi et al. POWDER TECHNOLOGY
- Discrete element simulation of the hydrodynamics in a 3D spouted bed: Influence of tube configuration
- (2013) Shiliang Yang et al. POWDER TECHNOLOGY
- CFD simulation of cylindrical spouted beds by the kinetic theory of granular flow
- (2013) Seyyed Hossein Hosseini et al. POWDER TECHNOLOGY
- CFD-modeling of effects of draft tubes on operating condition in spouted beds
- (2012) S. Moradi et al. APPLIED MATHEMATICAL MODELLING
- Use of vinasse to produce slow-release coated urea in spouted bed
- (2012) Gabriela Silveira da Rosa et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Feasibility study of a spouted bed gasification plant
- (2012) Daniele Bernocco et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Collision dynamics in fluidised bed granulators: A DEM-CFD study
- (2012) Lennart Fries et al. CHEMICAL ENGINEERING SCIENCE
- Usage of solar-assisted spouted bed drier in drying of pea
- (2012) Serpil Sahin et al. FOOD AND BIOPRODUCTS PROCESSING
- A novel conical combustor for thermal exploitation of vineyard pruning wastes
- (2012) María José San José et al. FUEL
- CFD-DEM simulation of spouting of corn-shaped particles
- (2012) Bing Ren et al. Particuology
- Improvement, validation and application of CFD/DEM model to dense gas–solid flow in a fluidized bed
- (2012) Falah Alobaid et al. Particuology
- Investigation of mixing behaviors in a spouted bed with different density particles using discrete element method
- (2012) Bing Ren et al. POWDER TECHNOLOGY
- Numerical simulation on the mixing behavior of corn-shaped particles in a spouted bed
- (2012) Bing Ren et al. POWDER TECHNOLOGY
- Adjustment of drag coefficient correlations in three dimensional CFD simulation of gas–solid bubbling fluidized bed
- (2011) Ehsan Esmaili et al. ADVANCES IN ENGINEERING SOFTWARE
- Modelling batch drying of sand in a draft-tube conical spouted bed
- (2011) Martin Olazar et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- A bubble-based EMMS model for gas–solid bubbling fluidization
- (2011) Zhansheng Shi et al. CHEMICAL ENGINEERING SCIENCE
- Kinetic study of lignocellulosic biomass oxidative pyrolysis
- (2011) Maider Amutio et al. FUEL
- Study on the Drag of a Cylinder-Shaped Particle in Steady Upward Gas Flow
- (2011) Bing Ren et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- DEM simulation on particle mixing in dry and wet particles spouted bed
- (2011) R.R. Zhu et al. POWDER TECHNOLOGY
- Pilot scale conical spouted bed pyrolysis reactor: Draft tube selection and hydrodynamic performance
- (2011) Jon Makibar et al. POWDER TECHNOLOGY
- Numerical analysis of the dynamics of two- and three-dimensional fluidized bed reactors using an Euler–Lagrange approach
- (2011) Perrine Pepiot et al. POWDER TECHNOLOGY
- Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
- (2011) M. Amutio et al. RESOURCES CONSERVATION AND RECYCLING
- Improved DEM-CFD model and validation: A conical-base spouted bed simulation study
- (2010) Liang-wan RONG et al. Journal of Hydrodynamics
- Modeling of biomass gasification in fluidized bed
- (2010) A. Gómez-Barea et al. PROGRESS IN ENERGY AND COMBUSTION SCIENCE
- Hydrodynamic and thermal experimentation on square-based spouted beds for polymer upgrading and unit scale-up
- (2009) Carlo Beltramo et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Scale-up study of spouted beds using computational fluid dynamics
- (2009) Rodrigo Béttega et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Simulation of coal gasification in a pressurized spout-fluid bed gasifier
- (2009) Qianjun Li et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- One-dimensional modelling of conical spouted beds
- (2009) M. Olazar et al. CHEMICAL ENGINEERING AND PROCESSING
- Hydrodynamics of gas–solid fluidized bed of disparately sized binary particles
- (2009) Jinsen Gao et al. CHEMICAL ENGINEERING SCIENCE
- Discrete particle simulation of particulate systems: A review of major applications and findings
- (2008) H.P. Zhu et al. CHEMICAL ENGINEERING SCIENCE
- Effect of a Draft Tube on the Fluid Dynamics of a Spouted Bed: Experimental and CFD Studies
- (2008) J. L. Vieira Neto et al. DRYING TECHNOLOGY
- Equilibrium modeling of gasification: Gibbs free energy minimization approach and its application to spouted bed and spout-fluid bed gasifiers
- (2008) S. Jarungthammachote et al. ENERGY CONVERSION AND MANAGEMENT
- Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spout fluidized bed
- (2008) J.M. Link et al. POWDER TECHNOLOGY
- Kinetic modelling of tyre pyrolysis in a conical spouted bed reactor
- (2007) Martin Olazar et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- DEM simulation of the particle dynamics in two-dimensional spouted beds
- (2007) X.-L. Zhao et al. POWDER TECHNOLOGY
- Spontaneous structures in three-dimensional bubbling gas-fluidized bed by parallel DEM–CFD coupling simulation
- (2007) Takuya Tsuji et al. POWDER TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started