Facilitating the additive manufacture of high-performance polymers through polymer blending: A review
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Facilitating the additive manufacture of high-performance polymers through polymer blending: A review
Authors
Keywords
-
Journal
EUROPEAN POLYMER JOURNAL
Volume -, Issue -, Pages 112553
Publisher
Elsevier BV
Online
2023-11-07
DOI
10.1016/j.eurpolymj.2023.112553
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- PEEK for Oral Applications: Recent Advances in Mechanical and Adhesive Properties
- (2023) Chengfeng Luo et al. Polymers
- Multi-Material Additive Manufacturing of High Temperature Polyetherimide (PEI)–Based Polymer Systems for Lightweight Aerospace Applications
- (2023) Ved S. Vakharia et al. Polymers
- Effects of FDM parameters and annealing on the mechanical and tribological properties of PEEK
- (2023) Yang He et al. COMPOSITE STRUCTURES
- Effect of Surface Modification of PEEK Artificial Phalanx by 3D Printing on its Biological Activity
- (2023) Yun Shi et al. Coatings
- Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing
- (2023) Nectarios Vidakis et al. Heliyon
- Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone
- (2022) Pei Wang et al. HIGH PERFORMANCE POLYMERS
- The effects of carbon nanotubes selective location on the structures and properties of polyphenylene sulfide/polyamide 66 fibers
- (2022) Zexi Su et al. JOURNAL OF APPLIED POLYMER SCIENCE
- 3D PEEK Objects Fabricated by Fused Filament Fabrication (FFF)
- (2022) Inwoo Baek et al. Materials
- Improved bond strength, reduced porosity and enhanced mechanical properties of 3D-printed polyetherimide composites by carbon nanotubes
- (2022) Qing Chen et al. COMPOSITES COMMUNICATIONS
- Emerging Research in Conductive Materials for Fused Filament Fabrication: A Critical Review
- (2022) Dejana Pejak Simunec et al. ADVANCED ENGINEERING MATERIALS
- Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing
- (2022) Peng Chen et al. ADVANCED MATERIALS
- Mechanical research to optimize parameter selection for PPS material processed by FDM
- (2022) Jone Retolaza et al. MATERIALS AND MANUFACTURING PROCESSES
- Selective dissolution of polysulfone support material of fused filament fabricated Ultem 9085 parts
- (2022) Ariadna Chueca de Bruijn et al. POLYMER TESTING
- An Analysis of Selected Technological Parameters’ Influences on the Tribological Properties of Products Manufactured Using the FFF Technique
- (2022) Gerhard Mitaľ et al. Applied Sciences-Basel
- 3D Printing of Auxetic Metamaterials with High‐Temperature and Programmable Mechanical Properties
- (2022) Lei Ren et al. Advanced Materials Technologies
- Rheology, Crystallinity, and Mechanical Investigation of Interlayer Adhesion Strength by Thermal Annealing of Polyetherimide (PEI/ULTEM 1010) Parts Produced by 3D Printing
- (2022) Musa Yilmaz et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Metal FFF sintering shrinkage rate measurements by X-ray computed tomography
- (2022) Fabien Léonard et al. Nondestructive Testing and Evaluation
- Composites Additive Manufacturing for Space Applications: A Review
- (2022) Sung Wook Paek et al. Materials
- Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)
- (2022) Kaifur Rashed et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Open challenges in tensile testing of additively manufactured polymers: A literature survey and a case study in fused filament fabrication
- (2022) Antonella Sola et al. POLYMER TESTING
- Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review
- (2022) Codruta Victoria Tigmeanu et al. Polymers
- Mechanical and electrical properties of additive manufactured high-performance continuous glass fiber reinforced PEEK composites
- (2022) Xiaojun Liu et al. COMPOSITES PART B-ENGINEERING
- INVESTIGATION OF THE EFFECT OF NOZZLE TEMPERATURE ON THE PROPERTIES OF POLYETHYLENE SAMPLES OBTAINED BY FDM PRINTING
- (2022) S. V. Kondrashov et al. HIGH TEMPERATURE MATERIAL PROCESSES
- Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D ‐printed polyetherimide material in Z ‐direction
- (2022) Salah‐Eddine Ouassil et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Strength and its variability in 3D printing of polymer composites with continuous fibers
- (2022) M. Parker et al. MATERIALS & DESIGN
- Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK
- (2022) Aditya Pulipaka et al. Journal of Manufacturing Processes
- Optimization of a combined thermal annealing and isostatic pressing process for mechanical and surface enhancement of Ultem FDM parts using Doehlert experimental designs
- (2022) Ariadna Chueca de Bruijn et al. Journal of Manufacturing Processes
- Mechanical Property Variance Amongst Vertical Fused Filament Fabricated Specimens via Four Different Printing Methods
- (2021) Richard Davies et al. POLYMER INTERNATIONAL
- Three-dimensionally printed and milled polyphenylene sulfone materials in dentistry: Tensile bond strength to veneering composite resin and surface properties after different pretreatments
- (2021) Lisa Marie Schönhoff et al. JOURNAL OF PROSTHETIC DENTISTRY
- Coalescence in fused filament fabrication process: thermo-dependent characterization of high-performance polymer properties
- (2021) Arthur Lepoivre et al. POLYMER TESTING
- Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization
- (2021) Bin Hu et al. HIGH PERFORMANCE POLYMERS
- An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts
- (2021) Anouar El Magri et al. HIGH PERFORMANCE POLYMERS
- Characterization of polyaryletherketone (PAEK) filaments and printed parts produced by extrusion‐based additive manufacturing
- (2021) Manuel Garcia‐Leiner et al. POLYMER INTERNATIONAL
- Poly(etheretherketone)/Poly(ethersulfone) Blends with Phenolphthalein: Miscibility, Thermomechanical Properties, Crystallization and Morphology
- (2021) Adrian Korycki et al. Polymers
- In situ micro-fibrillization and post annealing to significantly improve the tribological properties of polyphenylene sulfide/polyamide 66/polytetrafluoroethylene composites
- (2021) You Shi et al. COMPOSITES PART B-ENGINEERING
- Polymer-based filament feedstock for additive manufacturing
- (2021) Soyeon Park et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials
- (2021) Lisa Marie Schönhoff et al. Journal of the Mechanical Behavior of Biomedical Materials
- Semi-crystalline feedstock for filament-based 3D printing of polymers
- (2021) Dries Vaes et al. PROGRESS IN POLYMER SCIENCE
- The Extent of Interlayer Bond Strength during Fused Filament Fabrication of Nylon Copolymers: An Interplay between Thermal History and Crystalline Morphology
- (2021) Dries Vaes et al. Polymers
- Preparation and Performance Evaluation of Duotone 3D-Printed Polyetheretherketone as Oral Prosthetic Materials: A Proof-of-Concept Study
- (2021) Ling Ding et al. Polymers
- Relationship between FDM 3D Printing Parameters Study: Parameter Optimization for Lower Defects
- (2021) Patrich Ferretti et al. Polymers
- Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites
- (2021) K. Rodzeń et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Additively manufactured high-performance polymeric materials and their potential use in the oil and gas industry
- (2021) Eugene B. Caldona et al. MRS Communications
- Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites
- (2021) J. Jefferson Andrew et al. MATERIALS & DESIGN
- Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine
- (2021) Marwane Rouway et al. 3D Printing and Additive Manufacturing
- Study Of the compression behaviours of 3D-printed PEEK/CFR-PEEK sandwich composite structures
- (2021) Houfeng Jiang et al. Virtual and Physical Prototyping
- ABS filament moisture compensation possibilities in the FDM process
- (2021) Radosław Wichniarek et al. CIRP Journal of Manufacturing Science and Technology
- Mechanical study on the impact of an effective solvent support-removal methodology for FDM Ultem 9085 parts
- (2020) Ariadna Chueca de Bruijn et al. POLYMER TESTING
- Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites
- (2020) Yin Wu et al. Materials
- The Effect of Modification on the Properties of Polyetherimide and Its Carbon-Filled Composite
- (2020) Azamat Slonov et al. Polymers
- Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology
- (2020) Anouar El Magri et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships
- (2020) Ali Reza Zanjanijam et al. Polymers
- Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF
- (2020) Albert Forés-Garriga et al. MATERIALS & DESIGN
- PTFE as a toughness modifier of high‐performance PEI / PBT blends: Morphology control during melt processing
- (2020) Mauricio Vásquez‐Rendón et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Effects of Environmental Temperature and Humidity on the Geometry and Strength of Polycarbonate Specimens Prepared by Fused Filament Fabrication
- (2020) Lichen Fang et al. Materials
- Mechanical Properties and Gamma-Ray Shielding Performance of 3D-Printed Poly-Ether-Ether-Ketone/Tungsten Composites
- (2020) Yin Wu et al. Materials
- Recent Advances in Surface Activation of Polytetrafluoroethylene (PTFE) by Gaseous Plasma Treatments
- (2020) Gregor Primc Polymers
- Structural changes during 3D printing of bioderived and synthetic thermoplastic materials
- (2019) Mihai Alin Pop et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Semi‐Crystalline Polymer Blends for Material Extrusion Additive Manufacturing Printability: A Case Study with Poly(ethylene terephthalate) and Polypropylene
- (2019) Camden A. Chatham et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
- (2019) Wenli Ye et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interlocking Structure Formed by Multiscale Carbon Fiber–Polytetrafluoroethylene Fiber Hybrid Significantly Enhances the Friction and Wear Properties of Polyphenylene Sulfide Based Composites
- (2019) You Shi et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Modeling of interlayer contact and contact pressure during fused filament fabrication
- (2019) Timothy J. Coogan et al. JOURNAL OF RHEOLOGY
- Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review
- (2019) Tessa Jane Gordelier et al. RAPID PROTOTYPING JOURNAL
- On the thermal processing and mechanical properties of 3D-printed polyether ether ketone
- (2019) Russell Wang et al. MRS Communications
- Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?
- (2019) Cemile Basgul et al. Journal of the Mechanical Behavior of Biomedical Materials
- Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
- (2019) Bin Hu et al. MECHANICS OF MATERIALS
- Experimental investigation of mechanical, tribological and dielectric properties of alumina nano wire-reinforced PEEK/PTFE composites
- (2019) T S Frank Gladson et al. Materials Research Express
- A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications
- (2019) Tommaso Casalini et al. Frontiers in Bioengineering and Biotechnology
- Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing
- (2019) M.F. Arif et al. COMPOSITES PART B-ENGINEERING
- Preparation of high-performance PEEK anti-wear blends with melt-processable PTFE
- (2019) Xiaotao Qiu et al. HIGH PERFORMANCE POLYMERS
- Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling
- (2018) Shenglong Jiang et al. HIGH PERFORMANCE POLYMERS
- Experimental and theoretical investigations of the high performance blends of PEEK/PEI
- (2018) Sandeep Kumar et al. JOURNAL OF POLYMER ENGINEERING
- 3D printing of thermoplastic PI and interlayer bonding evaluation
- (2018) Wenzheng Wu et al. MATERIALS LETTERS
- Thermal conductivity of polymers and polymer nanocomposites
- (2018) Congliang Huang et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
- (2018) Neiko P. Levenhagen et al. POLYMER
- Thermal properties of polyetherimide/polycarbonate blends for advanced applications
- (2018) Ignazio Blanco et al. POLYMER DEGRADATION AND STABILITY
- Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
- (2018) Gianluca Cicala et al. Materials
- Performance of biocompatible PEEK processed by fused deposition additive manufacturing
- (2018) M.F. Arif et al. MATERIALS & DESIGN
- Screw extrusion-based additive manufacturing of PEEK
- (2018) Jian-Wei Tseng et al. MATERIALS & DESIGN
- Tailoring the mechanical, thermal, and flammability properties of high-performance PEI/PBT blends exhibiting dual-phase continuity
- (2018) Mauricio Vásquez-Rendón et al. POLYMER
- A more reliable DSC-based methodology to study crystallization kinetics: Application to poly(ether ketone ketone) (PEKK) copolymers
- (2018) Tanguy Choupin et al. POLYMER
- Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties
- (2018) Peng Geng et al. Polymers
- What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
- (2018) Chad Duty et al. Journal of Manufacturing Processes
- 3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts
- (2018) Tracie Prater et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on extruded filament bonding in fused filament fabrication
- (2018) Ana Elisa Costa et al. RAPID PROTOTYPING JOURNAL
- Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
- (2018) Peng Geng et al. Journal of Manufacturing Processes
- Effects of potassium titanate whisker and glass fiber on tribological and mechanical properties of PTFE/PEEK blend
- (2017) Xue Teng et al. HIGH PERFORMANCE POLYMERS
- Shrinkage compensation of holes via shrinkage of interior structure in FDM process
- (2017) Ulas Yaman INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Local Structure and Dynamics of Water Absorbed in Poly(ether imide): A Hydrogen Bonding Anatomy
- (2017) Antonio de Nicola et al. JOURNAL OF PHYSICAL CHEMISTRY B
- Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
- (2017) Neiko P. Levenhagen et al. POLYMER
- Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
- (2017) Eric L. Gilmer et al. POLYMER
- Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission
- (2017) Tracie Prater et al. RAPID PROTOTYPING JOURNAL
- Super-hydrophobic 3D printed polysulfone membranes with a switchable wettability by self-assembled candle soot for efficient gravity-driven oil/water separation
- (2017) Shushan Yuan et al. Journal of Materials Chemistry A
- Enhanced mechanical and tribological properties in polyphenylene sulfide/polytetrafluoroethylene composites reinforced by short carbon fiber
- (2016) Wei Luo et al. COMPOSITES PART B-ENGINEERING
- Morphology and properties of polyphenylene sulfide (PPS)/polyvinylidene fluoride (PVDF) polymer alloys by melt blending
- (2016) Jian Xing et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Performance evaluation of warping characteristic of fused deposition modelling process
- (2016) Biranchi N. Panda et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Rheological and crystallization enhancement in polyphenylenesulfide and polyetheretherketone POSS nanocomposites
- (2016) Katrina M. Knauer et al. JOURNAL OF APPLIED POLYMER SCIENCE
- The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modeling
- (2016) Eunseob Kim et al. RAPID PROTOTYPING JOURNAL
- Nano-TiO2 Reinforced PEEK/PEI Blends as Biomaterials for Load-Bearing Implant Applications
- (2015) Ana M. Díez-Pascual et al. ACS Applied Materials & Interfaces
- High-performance conductive materials based on the selective location of carbon black in poly(ether ether ketone)/polyimide matrix
- (2015) Cong Gao et al. COMPOSITES PART B-ENGINEERING
- Study of the thermal properties of miscible blends between poly(ether ketone ketone) (PEKK) and polyimide
- (2015) S. Dominguez et al. EUROPEAN POLYMER JOURNAL
- PPS/recycled PEEK/ carbon nanotube composites: Structure, properties and compatibility
- (2015) Shuling Deng et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Thermal, morphology, and mechanical properties of polyphenylene sulfide/polyether sulfone binary blends
- (2014) Dandan Li et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing
- (2014) W. Z. Wu et al. MATERIALS RESEARCH INNOVATIONS
- Heat distortion temperature of PPS/PC blend, PPS/PC nanocomposite and PPS/PC/GF hybrid nanocomposite
- (2013) Ji-Zhao Liang JOURNAL OF POLYMER ENGINEERING
- Modification of CNT and its effect on thermo mechanical, morphological as well as rheological properties of Polyether Imide (PEI)/Liquid Crystalline Polymer (LCP) blend system
- (2013) Goutam Hatui et al. JOURNAL OF POLYMER RESEARCH
- Synthesis of poly(ether ether ketone)-block-polyimide copolymer and its compatibilization for poly(ether ether ketone)/thermoplastic polyimide blends
- (2013) Cong Gao et al. POLYMER
- Plastic yielding of semicrystalline polymers affected by amorphous phase
- (2012) Artur Rozanski et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Studies on the mechanical, thermal, and morphological properties of poly(ether ether ketone)/poly(ether sulfone)/barium titanate nanocomposites: Correlation of experimental results with theoretical predictive models
- (2012) Subhash Mandal et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Properties of melt processable PTFE/PEEK blends: The effect of reactive compatibilization using electron beam irradiated melt processable PTFE
- (2012) Achim Frick et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Influence of an organophosphonite antioxidant on the thermal behavior of PEEK/PEI blend
- (2012) R. Ramani et al. THERMOCHIMICA ACTA
- Compatibilization of polyetherimide/liquid crystalline polymer blend using modified multiwalled carbon nanotubes and polyphosphazene as compatibilizers
- (2011) Ganesh C. Nayak et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Classification of New Melt-Processable PTFE: Comparison of Emulsion- and Suspension-Polymerized Materials
- (2011) Achim Frick et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Effect of SiC coated MWCNTs on the thermal and mechanical properties of PEI/LCP blend
- (2010) Ganesh Ch. Nayak et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Natural-based plasticizers and biopolymer films: A review
- (2010) Melissa Gurgel Adeodato Vieira et al. EUROPEAN POLYMER JOURNAL
- Processability, Structure and Mechanical Properties of Poly(ether imide)/Amorphous Copolyester Blends
- (2010) Ainhoa Granado et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Composition optimization of PEEK/PEI blend using model-free kinetics analysis
- (2010) R. Ramani et al. THERMOCHIMICA ACTA
- Synthesis and effect of polyphosphazenes on the thermal, mechanical and morphological properties of poly(etherimide)/thermotropic liquid crystalline polymer blend
- (2009) S. Bose et al. MATERIALS & DESIGN
- High-performance aromatic polyamides
- (2009) José M. García et al. PROGRESS IN POLYMER SCIENCE
- Investigation on the crystallization behavior of poly(ether ether ketone)/poly(phenylene sulfide) blends
- (2008) Ri-Chao Zhang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Effect of processing conditions on the bonding quality of FDM polymer filaments
- (2008) Q. Sun et al. RAPID PROTOTYPING JOURNAL
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started