An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM)

(2021) Hamid Reza Vanaei et al.   RAPID PROTOTYPING JOURNAL

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication

(2020) Hamidreza Vanaei et al.   POLYMER ENGINEERING AND SCIENCE

Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts

(2020) H. R. Vanaei et al.   JOURNAL OF MATERIALS SCIENCE

Mechanical characterization of biocompatible PEEK by FDM

(2020) Yachen Zhao et al.   Journal of Manufacturing Processes

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

(2020) Albert Forés-Garriga et al.   MATERIALS & DESIGN

Experimental study of PLA thermal behavior during fused filament fabrication

(2020) Hamid Reza Vanaei et al.   JOURNAL OF APPLIED POLYMER SCIENCE

A comparative in‐process monitoring of temperature profile in fused filament fabrication

(2020) H.R. Vanaei et al.   POLYMER ENGINEERING AND SCIENCE

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

(2019) Cemile Basgul et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding

(2019) Makara Lay et al.   COMPOSITES PART B-ENGINEERING

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

(2019) Bin Hu et al.   MECHANICS OF MATERIALS

Rate-dependent tensile failure behavior of short fiber reinforced PEEK

(2018) Chunyang Chen et al.   COMPOSITES PART B-ENGINEERING

Additive layer manufacturing of poly (ether ether ketone) via FDM

(2018) Marianna Rinaldi et al.   COMPOSITES PART B-ENGINEERING

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

(2018) А.А. Stepashkin et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling

(2018) Shenglong Jiang et al.   HIGH PERFORMANCE POLYMERS

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

(2018) Aboma Gebisa et al.   Materials

Performance of biocompatible PEEK processed by fused deposition additive manufacturing

(2018) M.F. Arif et al.   MATERIALS & DESIGN

Fatigue performance of fused filament fabrication PLA specimens

(2018) Giovanni Gomez-Gras et al.   MATERIALS & DESIGN

3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts

(2018) Tracie Prater et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Mechanical properties of ULTEM 9085 material processed by fused deposition modeling

(2018) Kate Iren Byberg et al.   POLYMER TESTING

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

(2018) Peng Geng et al.   Journal of Manufacturing Processes

An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study

(2017) Ashu Garg et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

(2017) S. Berretta et al.   POLYMER TESTING

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

(2017) Chuncheng Yang et al.   RAPID PROTOTYPING JOURNAL

Comparative potential assessment of solid lubricants on the performance of poly aryl ether ketone (PAEK) composites

(2017) Jitendra Narayan Panda et al.   WEAR

Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing

(2017) Daniel-Alexander Türk et al.   MATERIALS & DESIGN

Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures

(2016) Garrett W. Melenka et al.   COMPOSITE STRUCTURES

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

(2016) Xiaoyong Tian et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Thermal aging and reinforcement type effects on the tribological, thermal, thermomechanical, physical and morphological properties of poly(ether ether ketone) composites

(2016) Nevin Gamze Karsli et al.   COMPOSITES PART B-ENGINEERING

Fatigue Behavior of FDM Parts Manufactured with Ultem 9085

(2016) Matthias Fischer et al.   JOM

Morphology and dynamical mechanical properties of poly ether ketone ketone (PEKK) with meta phenyl links

(2016) Luis Quiroga Cortés et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Next generation high-performance carbon fiber thermoplastic composites based on polyaryletherketones

(2016) Dustin Veazey et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic

(2016) Paolo Bettini et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

High performance polymer nanocomposites for additive manufacturing applications

(2016) Al C. de Leon et al.   REACTIVE & FUNCTIONAL POLYMERS

The effects of recycling on the properties of carbon nanotube-filled polypropylene composites and worker exposures

(2016) Jinde Zhang et al.   Environmental Science-Nano

Characterization of stiffness degradation caused by fatigue damage of additive manufactured parts

(2016) C.W. Ziemian et al.   MATERIALS & DESIGN

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

(2016) Zixiang Weng et al.   MATERIALS & DESIGN

Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation

(2016) Ryosuke Matsuzaki et al.   Scientific Reports

Study of the thermal properties of miscible blends between poly(ether ketone ketone) (PEKK) and polyimide

(2015) S. Dominguez et al.   EUROPEAN POLYMER JOURNAL

Influence of new thermoplastic sizing agents on the mechanical behavior of poly(ether ketone ketone)/carbon fiber composites

(2015) Isabelle Giraud et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

(2015) Wenzheng Wu et al.   Materials

Fused deposition modeling with polypropylene

(2015) O.S. Carneiro et al.   MATERIALS & DESIGN

Highly oriented carbon fiber–polymer composites via additive manufacturing

(2014) Halil L. Tekinalp et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing

(2014) W. Z. Wu et al.   MATERIALS RESEARCH INNOVATIONS

Experimental investigation of FDM process for improvement of mechanical properties and production cost

(2014) Ismail Durgun et al.   RAPID PROTOTYPING JOURNAL

Evaluation of stiffness and strength in fused deposition sandwich specimens

(2013) L. C. Magalhães et al.   Journal of the Brazilian Society of Mechanical Sciences and Engineering

Characterization and evaluation of a PMMA‐based 3D printing process

(2013) Christian Polzin et al.   RAPID PROTOTYPING JOURNAL

Permanent magnets: Plugging the gap

(2012) J.M.D. Coey   SCRIPTA MATERIALIA

Experimental investigation and empirical modelling of FDM process for compressive strength improvement

(2011) Anoop K. Sood et al.   Journal of Advanced Research

Poly-Lactic Acid: Production, Applications, Nanocomposites, and Release Studies

(2010) Majid Jamshidian et al.   COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY

Investigation of the thermal decomposition and flammability of PEEK and its carbon and glass-fibre composites

(2010) Parina Patel et al.   POLYMER DEGRADATION AND STABILITY

Composition optimization of PEEK/PEI blend using model-free kinetics analysis

(2010) R. Ramani et al.   THERMOCHIMICA ACTA

A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientations

(2010) Z. Rasheva et al.   TRIBOLOGY INTERNATIONAL

Parametric appraisal of mechanical property of fused deposition modelling processed parts

(2009) Anoop Kumar Sood et al.   MATERIALS & DESIGN

The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites

(2009) A M Díez-Pascual et al.   NANOTECHNOLOGY