The Extent of Interlayer Bond Strength during Fused Filament Fabrication of Nylon Copolymers: An Interplay between Thermal History and Crystalline Morphology

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High‐Temperature Polylactic Acid in Fused Deposition Modeling

(2020) Behnam Akhoundi et al.   POLYMER ENGINEERING AND SCIENCE

Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication

(2020) Hamidreza Vanaei et al.   POLYMER ENGINEERING AND SCIENCE

Measuring Tie Chains and Trapped Entanglements in Semicrystalline Polymers

(2020) Amanda G. McDermott et al.   MACROMOLECULES

Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

(2020) Sandra Petersmann et al.   Additive Manufacturing

Prediction of interlayer strength in material extrusion additive manufacturing

(2020) Timothy J Coogan et al.   Additive Manufacturing

Fused filament fabrication of polymer materials: A review of interlayer bond

(2020) Xia Gao et al.   Additive Manufacturing

Correlation between welding behavior and mechanical anisotropy of long chain polyamide 12 manufactured with fused filament fabrication

(2020) Shunxin Qi et al.   POLYMER

Fused Deposition Modeling of Polyamides: Crystallization and Weld Formation

(2020) Andrea Costanzo et al.   Polymers

Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid

(2020) Andrea Costanzo et al.   Additive Manufacturing

Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

(2019) G. D. Goh et al.   CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES

3D printing of polyether-ether-ketone for biomedical applications

(2019) Sunpreet Singh et al.   EUROPEAN POLYMER JOURNAL

Additive manufacturing for space: status and promises

(2019) Enea Sacco et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Fused deposition modeling with polyamide 1012

(2019) Xia Gao et al.   RAPID PROTOTYPING JOURNAL

Assessment of Crystallinity Development during Fused Filament Fabrication through Fast Scanning Chip Calorimetry

(2019) Dries Vaes et al.   Applied Sciences-Basel

Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective

(2019) Amy M. Peterson   Additive Manufacturing

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

(2019) Sunil Bhandari et al.   Additive Manufacturing

Anisotropic rate-dependent mechanical behavior of Poly(Lactic Acid) processed by Material Extrusion Additive Manufacturing

(2019) Wilco M.H. Verbeeten et al.   Additive Manufacturing

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

(2018) Syed A.M. Tofail et al.   Materials Today

Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides

(2018) Varun Srinivas et al.   POLYMER

Heat distribution in material during fused deposition modelling

(2018) Piotr Wolszczak et al.   RAPID PROTOTYPING JOURNAL

Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion

(2018) Joseph Bartolai et al.   RAPID PROTOTYPING JOURNAL

Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process

(2018) Nahal Aliheidari et al.   MATERIALS & DESIGN

Controllable Crystallization Behavior of Nylon-6/66 Copolymers Based on Regulating Sequence Distribution

(2018) Jie Tang et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

The importance of rheological behavior in the additive manufacturing technique material extrusion

(2018) Michael E. Mackay   JOURNAL OF RHEOLOGY

Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

(2017) Martin Spoerk et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples

(2017) Neiko P. Levenhagen et al.   POLYMER

Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene

(2017) Lu Wang et al.   POLYMER

Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing

(2017) C. McIlroy et al.   POLYMER

Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)

(2017) Lu Wang et al.   POLYMER

Study on structure and property relations of α-iPP during uniaxial deformation via in situ synchrotron SAXS/WAXS and POM investigations

(2017) Yingrui Shang et al.   POLYMER ENGINEERING AND SCIENCE

Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling

(2017) Hao Li et al.   RAPID PROTOTYPING JOURNAL

Healing simulation for bond strength prediction of FDM

(2017) Timothy J. Coogan et al.   RAPID PROTOTYPING JOURNAL

Weld formation during material extrusion additive manufacturing

(2017) Jonathan E. Seppala et al.   Soft Matter

New Insight into Time-Temperature Correlation for Polymer Relaxations Ranging from Secondary Relaxation to Terminal Flow: Application of a Universal and Developed WLF Equation

(2017) Yonggang Shangguan et al.   Polymers

Cranial Polypropylene Implants by Fused Filament Fabrication 

(2016) Matthias Katschnig et al.   ADVANCED ENGINEERING MATERIALS

Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds

(2016) F.S. Senatov et al.   Journal of the Mechanical Behavior of Biomedical Materials

Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion

(2016) Sebastian Hertle et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Random Copolymers from Polyamide 11 and Polyamide 12 by Reactive Extrusion: Synthesis, Eutectic Phase Behavior, and Polymorphism

(2016) Lien Telen et al.   MACROMOLECULES

Autohesion of polymers

(2016) Firas Awaja   POLYMER

The status, challenges, and future of additive manufacturing in engineering

(2015) Wei Gao et al.   COMPUTER-AIDED DESIGN

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

(2015) Brian N. Turner et al.   RAPID PROTOTYPING JOURNAL

A review of melt extrusion additive manufacturing processes: I. Process design and modeling

(2014) Brian N. Turner et al.   RAPID PROTOTYPING JOURNAL

Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering

(2014) T. Patrício et al.   RAPID PROTOTYPING JOURNAL

Influence of the Degree of Crystallinity on the Mechanical and Tribological Properties of High-Performance Thermoplastics Over a Wide Range of Temperatures: From Room Temperature up to 250°C

(2013) I. V. Gofman et al.   Journal of Macromolecular Science Part B-Physics

PLA/F68/Dexamethasone implants prepared by hot-melt extrusion for controlled release of anti-inflammatory drug to implantable medical devices: I. Preparation, characterization and hydrolytic degradation study

(2012) DeXia Li et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

In situ studies on the temperature-related deformation behavior of isotactic polypropylene spherulites with uniaxial stretching: The effect of crystallization conditions

(2012) Hong Huo et al.   POLYMER ENGINEERING AND SCIENCE

Plastic deformation of spherulitic semi-crystalline polymers: An in situ AFM study of polybutene under tensile drawing

(2009) C. Thomas et al.   POLYMER

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL