Open challenges in tensile testing of additively manufactured polymers: A literature survey and a case study in fused filament fabrication
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Open challenges in tensile testing of additively manufactured polymers: A literature survey and a case study in fused filament fabrication
Authors
Keywords
-
Journal
POLYMER TESTING
Volume -, Issue -, Pages 107859
Publisher
Elsevier BV
Online
2022-11-05
DOI
10.1016/j.polymertesting.2022.107859
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Characterization of 3D-printed PLA parts with different raster orientations and printing speeds
- (2022) Mohammad Reza Khosravani et al. Scientific Reports
- Influence of Extruder’s Nozzle Diameter on the Improvement of Functional Properties of 3D-Printed PLA Products
- (2022) Piotr Czyżewski et al. Polymers
- Influence of Ambient Temperature on Part Distortion: A Simulation Study on Amorphous and Semi-Crystalline Polymer
- (2022) Anto Antony Samy et al. Polymers
- The Influence of the Process Parameters on the Mechanical Properties of PLA Specimens Produced by Fused Filament Fabrication—A Review
- (2022) Vasile Cojocaru et al. Polymers
- Under-extrusion challenges for elastic filaments: the influence of moisture on additive manufacturing
- (2022) V. M. Bruère et al. Progress in Additive Manufacturing
- MEX 3D Printed HDPE/TiO2 Nanocomposites Physical and Mechanical Properties Investigation
- (2022) Nectarios Vidakis et al. Journal of Composites Science
- Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites
- (2022) Antonella Sola MACROMOLECULAR MATERIALS AND ENGINEERING
- A Comprehensive Review on the Optimization of the Fused Deposition Modeling Process Parameter for Better Tensile Strength of PLA-Printed Parts
- (2022) Tesfaye Mengesha Medibew Advances in Materials Science and Engineering
- The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling
- (2021) Mohammed Algarni Polymers
- Coalescence in fused filament fabrication process: thermo-dependent characterization of high-performance polymer properties
- (2021) Arthur Lepoivre et al. POLYMER TESTING
- Numerical study for the improvement of bead spreading architecture with modified nozzle geometries in additive manufacturing of polymers
- (2021) Easir Arafat Papon et al. RAPID PROTOTYPING JOURNAL
- Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review
- (2021) Ali Alperen Bakır et al. RAPID PROTOTYPING JOURNAL
- Bonding widths of Deposited Polymer Strands in Additive Manufacturing
- (2021) Cheng Luo et al. Materials
- Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing
- (2021) Truman J. Word et al. MRS Communications
- A comparative study of the tensile properties of compression molded and 3D printed PLA specimens in dry and water saturated conditions
- (2021) Vikas Chandran et al. Journal of Mechanical Science and Technology
- Optimization of Manufacturing Parameters and Tensile Specimen Geometry for Fused Deposition Modeling (FDM) 3D-Printed PETG
- (2021) Arda Özen et al. Materials
- Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
- (2021) Daniyar Syrlybayev et al. Polymers
- Additively manufactured continuous carbon fiber-reinforced thermoplastic for topology optimized unmanned aerial vehicle structures
- (2021) G.D. Goh et al. COMPOSITES PART B-ENGINEERING
- Polymer-based filament feedstock for additive manufacturing
- (2021) Soyeon Park et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Drivers of mechanical performance variance in 3D ‐printed fused filament fabrication parts: An Onyx FR case study
- (2021) Christine Ma et al. POLYMER COMPOSITES
- The Extent of Interlayer Bond Strength during Fused Filament Fabrication of Nylon Copolymers: An Interplay between Thermal History and Crystalline Morphology
- (2021) Dries Vaes et al. Polymers
- Design of experiment analysis on tensile properties of PLA samples produced by fused filament fabrication
- (2021) Lionel Auffray et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Geometrical Scaling Effects in the Mechanical Properties of 3D-Printed Body-Centered Cubic (BCC) Lattice Structures
- (2021) Alia Ruzanna Aziz et al. Polymers
- Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review
- (2021) Nima Zohdi et al. Polymers
- A review on voids of 3D printed parts by fused filament fabrication
- (2021) Yubo Tao et al. Journal of Materials Research and Technology-JMR&T
- A review on qualification and certification for metal additive manufacturing
- (2021) Ze Chen et al. Virtual and Physical Prototyping
- Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties
- (2020) Claudio Badini et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Relationships between size and mechanical properties of scaffold-like structures
- (2020) Claudia Pagano et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing
- (2020) Kevin Carpenter et al. Materials
- A highly accurate methodology for the prediction and correlation of mechanical properties based on the slimness ratio of additively manufactured tensile test specimens
- (2020) Lucas S. Moura et al. JOURNAL OF MATERIALS SCIENCE
- The effect of diameter of fibre on formation of hydrogen bonds and mechanical properties of 3D-printed PCL
- (2020) Żaneta Górecka et al. Materials Science & Engineering C-Materials for Biological Applications
- The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
- (2020) Vigneshwaran Shanmugam et al. POLYMER TESTING
- Dimensional considerations on the mechanical properties of 3D printed polymer parts
- (2020) Nabila Elmrabet et al. POLYMER TESTING
- Effects of infill characteristics and strain rate on the deformation and failure properties of additively manufactured polyamide-based composite structures
- (2020) Kui Wang et al. Results in Physics
- Anisotropic material behavior of 3D printed composite structures – Material extrusion additive manufacturing
- (2020) M. Somireddy et al. MATERIALS & DESIGN
- Size effects in hybrid unidirectional polymer composites under longitudinal tension: A micromechanical investigation
- (2020) Jose M. Guerrero et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers
- (2020) Nectarios Vidakis et al. Polymers
- Evaluating the Quality Surface Performance of Additive Manufacturing Systems: Methodology and a Material Jetting Case Study
- (2019) Razvan Udroiu et al. Materials
- Bio-Inspired 3D Infill Patterns for Additive Manufacturing and Structural Applications
- (2019) Jan Podroužek et al. Materials
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
- (2019) G. D. Goh et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations
- (2019) Tianyun Yao et al. COMPOSITES PART B-ENGINEERING
- Low‐pressure additive manufacturing of continuous fiber‐reinforced polymer composites
- (2019) Heather J. O'Connor et al. POLYMER COMPOSITES
- Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
- (2019) Tuan Noraihan Azila Tuan Rahim et al. Polymer Reviews
- Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
- (2019) Muhammad Harris et al. Materials
- Modeling of interlayer contact and contact pressure during fused filament fabrication
- (2019) Timothy J. Coogan et al. JOURNAL OF RHEOLOGY
- Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review
- (2019) Tessa Jane Gordelier et al. RAPID PROTOTYPING JOURNAL
- A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
- (2019) S.M. Fijul Kabir et al. COMPOSITE STRUCTURES
- Uniaxial tensile testing standardization for the qualification of fiber reinforced plastics for fused filament fabrication
- (2019) William H. Ferrell et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Influence of fused deposition modeling parameters on the mechanical properties of ABS parts
- (2019) Carlos M.S. Vicente et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Considerations on the Applicability of Test Methods for Mechanical Characterization of Materials Manufactured by FDM
- (2019) Amabel García-Domínguez et al. Materials
- Additive manufacturing: scientific and technological challenges, market uptake and opportunities
- (2018) Syed A.M. Tofail et al. Materials Today
- Anisotropic mechanical property variance between ASTM D638-14 type i and type iv fused filament fabricated specimens
- (2018) John J. Laureto et al. POLYMER TESTING
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties
- (2018) Hongbin Li et al. RAPID PROTOTYPING JOURNAL
- Comparison of Tensile and Compressive Properties of Carbon/Glass Interlayer and Intralayer Hybrid Composites
- (2018) Weili Wu et al. Materials
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- Rheological and heat transfer effects in fused filament fabrication
- (2018) David D. Phan et al. JOURNAL OF RHEOLOGY
- Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
- (2018) Lincy Pyl et al. POLYMER TESTING
- The importance of rheological behavior in the additive manufacturing technique material extrusion
- (2018) Michael E. Mackay JOURNAL OF RHEOLOGY
- A study on extruded filament bonding in fused filament fabrication
- (2018) Ana Elisa Costa et al. RAPID PROTOTYPING JOURNAL
- Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
- (2017) Mohsen Seifi et al. JOM
- Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements
- (2017) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
- (2017) S. Berretta et al. POLYMER TESTING
- Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
- (2017) Jason T. Cantrell et al. RAPID PROTOTYPING JOURNAL
- Bond and part strength in fused deposition modeling
- (2017) Timothy J. Coogan et al. RAPID PROTOTYPING JOURNAL
- Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
- (2017) Jasgurpreet Singh Chohan et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
- (2017) J.M. Chacón et al. MATERIALS & DESIGN
- Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
- (2016) Garrett W. Melenka et al. COMPOSITE STRUCTURES
- Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression
- (2016) Sofiane Guessasma et al. EUROPEAN POLYMER JOURNAL
- Overview of Materials Qualification Needs for Metal Additive Manufacturing
- (2016) Mohsen Seifi et al. JOM
- Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
- (2016) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modeling
- (2016) Eunseob Kim et al. RAPID PROTOTYPING JOURNAL
- Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
- (2016) Kenny Álvarez et al. Ingenieria e Investigacion
- Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens
- (2016) Christiane Wendt et al. Advances in Materials Science and Engineering
- Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
- (2016) Kenny Álvarez et al. Ingenieria e Investigacion
- Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
- (2016) Caterina Casavola et al. MATERIALS & DESIGN
- Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
- (2016) Miguel Fernandez-Vicente et al. 3D Printing and Additive Manufacturing
- Metrology Needs for Metal Additive Manufacturing Powders
- (2015) John A. Slotwinski et al. JOM
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Standardization in additive manufacturing: activities carried out by international organizations and projects
- (2014) M. D. Monzón et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Raster angle mechanics in fused deposition modelling
- (2014) Bin Huang et al. JOURNAL OF COMPOSITE MATERIALS
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
- (2014) B.M. Tymrak et al. MATERIALS & DESIGN
- A review of melt extrusion additive manufacturing processes: I. Process design and modeling
- (2014) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- An Additive Manufacturing Test Artifact
- (2014) Shawn Moylan et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30
- (2013) Dario Croccolo et al. COMPUTATIONAL MATERIALS SCIENCE
- Mechanical characterization of hollow ceramic nanolattices
- (2013) Lucas R. Meza et al. JOURNAL OF MATERIALS SCIENCE
- Materials mechanical size effects: a review
- (2012) T. T. Zhu et al. MATERIALS TECHNOLOGY
- Suitability of PLA/TCP for fused deposition modeling
- (2012) Dietmar Drummer et al. RAPID PROTOTYPING JOURNAL
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Effect of processing conditions on the bonding quality of FDM polymer filaments
- (2008) Q. Sun et al. RAPID PROTOTYPING JOURNAL
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search