Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing

Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical control parameters

(2023) Markos Petousis et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Functionality Versus Sustainability for PLA in MEX 3D Printing: The Impact of Generic Process Control Factors on Flexural Response and Energy Efficiency

(2023) Markos Petousis et al.   Polymers

Energy Consumption vs. Tensile Strength of Poly[methyl methacrylate] in Material Extrusion 3D Printing: The Impact of Six Control Settings

(2023) Nectarios Vidakis et al.   Polymers

Parameter effects and process modelling of Polyamide 12 3D-printed parts strength and toughness

(2022) N. Vidakis et al.   MATERIALS AND MANUFACTURING PROCESSES

Key parameters controlling surface quality and dimensional accuracy: a critical review of FFF process

(2022) John Kechagias et al.   MATERIALS AND MANUFACTURING PROCESSES

Characterization of power demand and energy consumption for fused filament fabrication using CFR-PEEK

(2022) Kyudong Kim et al.   RAPID PROTOTYPING JOURNAL

Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation

(2022) Cho-Pei Jiang et al.   RAPID PROTOTYPING JOURNAL

Characterization of 3D-printed PLA parts with different raster orientations and printing speeds

(2022) Mohammad Reza Khosravani et al.   Scientific Reports

A comprehensive investigation of the 3D printing parameters’ effects on the mechanical response of polycarbonate in fused filament fabrication

(2022) N. Vidakis et al.   Progress in Additive Manufacturing

Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: A statistical investigation

(2022) Gurcan Atakok et al.   Journal of Materials Research and Technology-JMR&T

Bending fatigue behavior of fused filament fabrication 3D-printed ABS and PLA joints with rotary friction welding

(2022) Mohammad Sadegh Aghareb Parast et al.   Progress in Additive Manufacturing

Parametric optimization of material extrusion 3D printing process: an assessment of Box-Behnken vs. full-factorial experimental approach

(2022) John D. Kechagias et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Fracture behavior of anisotropic 3D-printed parts: experiments and numerical simulations

(2022) Mohammad Reza Khosravani et al.   Journal of Materials Research and Technology-JMR&T

Evaluation of the Geometrical Discontinuity in the Mixed-Mode I/II Fracture Load of FDM 3D-Printed Parts

(2021) B. Ameri et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization

(2021) Bin Hu et al.   HIGH PERFORMANCE POLYMERS

3D printing of PEEK and its composite to increase biointerfaces as a biomedical material- A review

(2021) Bankole I. Oladapo et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Quantitative Assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) Cranial Implants

(2021) Neha Sharma et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Additively-manufactured PEEK/HA porous scaffolds with highly-controllable mechanical properties and excellent biocompatibility

(2021) Jibao Zheng et al.   Materials Science & Engineering C-Materials for Biological Applications

The effects of infill patterns and infill percentages on energy consumption in fused filament fabrication using CFR-PEEK

(2021) Mohammad Rashidul Hassan et al.   RAPID PROTOTYPING JOURNAL

3D-printed porous PEEK scaffold combined with CSMA/POSS bioactive surface: A strategy for enhancing osseointegration of PEEK implants

(2021) Zhewen Liu et al.   COMPOSITES PART B-ENGINEERING

Parameter effects and process modeling of FFF-TPU mechanical response

(2021) J. D. Kechagias et al.   MATERIALS AND MANUFACTURING PROCESSES

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Fracture Resistance Analysis of 3D-Printed Polymers

(2020) Ali Zolfagharian et al.   Polymers

Graphene oxide-driven interfacial coupling in laser 3D printed PEEK/PVA scaffolds for bone regeneration

(2020) Pei Feng et al.   Virtual and Physical Prototyping

Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes

(2020) Nectarios Vidakis et al.   Sustainability

Fracture and load-carrying capacity of 3D-printed cracked components

(2020) Mohammad Reza Khosravani et al.   Extreme Mechanics Letters

The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites

(2020) Nectarios Vidakis et al.   Micromachines

Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives

(2020) Henry A. Colorado et al.   Journal of Materials Research and Technology-JMR&T

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

(2020) Peng Wang et al.   COMPOSITES PART B-ENGINEERING

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

(2020) Yiqiao Wang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

(2019) Li et al.   Polymers

Deformation characteristics of glass‐filled epoxy composite under compression: Role of filler shape and volume fraction

(2019) Sarthak S. Singh et al.   POLYMER COMPOSITES

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Smart sewing work measurement system using IoT-based power monitoring device and approximation algorithm

(2019) Woo-Kyun Jung et al.   INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

(2019) Bin Hu et al.   MECHANICS OF MATERIALS

Fracture of 3D-printed polymers: Crucial role of filament-scale geometric features

(2019) James Allum et al.   ENGINEERING FRACTURE MECHANICS

Fabrication and evaluation of 3-D printed PEEK scaffolds containing Macropores by design

(2019) K. Elhattab et al.   MATERIALS LETTERS

Additive layer manufacturing of poly (ether ether ketone) via FDM

(2018) Marianna Rinaldi et al.   COMPOSITES PART B-ENGINEERING

Creation of internal structure of mashed potato construct by 3D printing and its textural properties

(2018) Zhenbin Liu et al.   FOOD RESEARCH INTERNATIONAL

An Overview on Additive Manufacturing of Polymers

(2018) Iwona Jasiuk et al.   JOM

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Fracture resistance measurement of fused deposition modeling 3D printed polymers

(2017) Nahal Aliheidari et al.   POLYMER TESTING

On the Strain Rate Sensitivity of Abs and Abs Plus Fused Deposition Modeling Parts

(2016) A. Vairis et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Polyetheretherketone (PEEK) for medical applications

(2016) Ivan Vladislavov Panayotov et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Finite element analysis of the biomechanical effects of PEEK dental implants on the peri-implant bone

(2015) A.D. Schwitalla et al.   JOURNAL OF BIOMECHANICS

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

(2015) Wenzheng Wu et al.   Materials

The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles

(2013) J. Chen et al.   POLYMER