A comprehensive review on surface post-treatments for freeform surfaces of bio-implants
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A comprehensive review on surface post-treatments for freeform surfaces of bio-implants
Authors
Keywords
-
Journal
Journal of Materials Research and Technology-JMR&T
Volume 23, Issue -, Pages 4866-4908
Publisher
Elsevier BV
Online
2023-02-15
DOI
10.1016/j.jmrt.2023.02.007
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Performance analysis of biodegradable materials for orthopedic applications
- (2022) Muzamil Hussain et al. Materials Today Communications
- A review on magnetically assisted abrasive flow machining and abrasive material type
- (2022) Palwinder Singh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Laser surface polishing of Ti-6Al-4V parts manufactured by laser powder bed fusion
- (2022) Muhannad Ahmed Obeidi et al. SURFACE & COATINGS TECHNOLOGY
- Investigations on the trochoidal toolpath for processing the biomaterial through magnetorheological fluid assisted finishing process
- (2022) Atul Singh Rajput et al. Journal of Manufacturing Processes
- A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties
- (2022) Kaveh Moghadasi et al. Journal of Materials Research and Technology-JMR&T
- Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants
- (2022) Mandlenkosi G.R. Mahlobo et al. Journal of Materials Research and Technology-JMR&T
- Selection and preparation strategies of Mg-alloys and other biodegradable materials for orthopaedic applications: A review
- (2022) Nilesh Tipan et al. Materials Today Communications
- Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants
- (2022) Charlotte Skjöldebrand et al. Materials Today Bio
- Insight on recent development in metallic biomaterials: Strategies involving synthesis, types and surface modification for advanced therapeutic and biomedical applications
- (2022) S. Thanigaivel et al. BIOCHEMICAL ENGINEERING JOURNAL
- Mathematical modeling of material removal and surface roughness in ultrasonic assisted magnetic abrasive flow machining process
- (2022) Nitin Dixit et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation
- (2022) Abdul Wahab Hashmi et al. Metals
- Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: A review
- (2022) Reza Motallebi et al. Journal of Materials Research and Technology-JMR&T
- Biodegradable Mg-based implants obtained via anodic oxidation applicable in dentistry: preparation and characterization
- (2022) Julia Radwan-Pragłowska et al. Journal of Materials Research and Technology-JMR&T
- Literature review and methodological framework for integration of IoT and PLM in manufacturing industry
- (2022) Piers Barrios et al. COMPUTERS IN INDUSTRY
- Development of novel low-cost sustainable abrasive flow finishing media from ground tire rubber and its performance evaluation
- (2022) Irfan Ahmad Ansari et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Additive texturing of metallic implant surfaces for improved wetting and biotribological performance
- (2022) Suryank Dwivedi et al. Journal of Materials Research and Technology-JMR&T
- Biodegradable magnesium metal matrix composites for biomedical implants: synthesis, mechanical performance, and corrosion behavior – a review
- (2022) Ramachandran Krishnan et al. Journal of Materials Research and Technology-JMR&T
- MgB2-based biodegradable materials for orthopedic implants
- (2022) P. Badica et al. Journal of Materials Research and Technology-JMR&T
- Radial head replacement using personalized 3D printed porous tantalum prosthesis
- (2022) Changgui Zhang et al. Journal of Materials Research and Technology-JMR&T
- Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process
- (2022) Nitin Dixit et al. MATERIALS AND MANUFACTURING PROCESSES
- Numerical and experimental study on the ultrasonic-assisted soft abrasive flow polishing characteristics
- (2021) Jiang-qin Ge et al. The International Journal of Advanced Manufacturing Technology
- Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining
- (2021) Qiuyan Wang et al. The International Journal of Advanced Manufacturing Technology
- In-Situ Laser Polishing Additive Manufactured AlSi10Mg: Effect of Laser Polishing Strategy on Surface Morphology, Roughness and Microhardness
- (2021) Jiantao Zhou et al. Materials
- Enhancement of the surface characteristics of Ti-based biomedical alloy by electropolishing in environmentally friendly deep eutectic solvent (Ethaline)
- (2021) A. Kityk et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Silver-Calcia Stabilized Zirconia Nanocomposite Coated medical grade stainless steel as Potential Bioimplants
- (2021) Gobi Saravanan Kaliaraj et al. Surfaces and Interfaces
- Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
- (2021) Seong-Hyun Park et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Post-Processing and Surface Characterization of Additively Manufactured Stainless Steel 316L Lattice: Implications for BioMedical Use
- (2021) Alex Quok An Teo et al. Materials
- Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
- (2021) Anil Kumar Singla et al. Journal of Manufacturing Processes
- Research trends in abrasive flow machining: A systematic review
- (2021) Nitin Dixit et al. Journal of Manufacturing Processes
- Enhanced corrosion, tribocorrosion resistance and controllable osteogenic potential of stem cells on micro-rippled Ti6Al4V surfaces produced by pulsed laser remelting
- (2021) Sumanta Mukherjee et al. Journal of Manufacturing Processes
- Plasma sprayed Lanthanum zirconate coating over additively manufactured carbon nanotube reinforced Ni-based Composite: Unique performance of thermal barrier coating system without bondcoat
- (2021) Sumit Choudhary et al. APPLIED SURFACE SCIENCE
- Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304
- (2021) Xu Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thin film metallic glasses for bioimplants and surgical tools: A review
- (2021) S. Thanka Rajan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Osteoclast-mediated resorption on additively manufactured porous metal and plasma-sprayed HA-coated Ti implants
- (2021) Naboneeta Sarkar et al. JOURNAL OF MATERIALS RESEARCH
- Analysis of the influence of surface treatment by high-power laser irradiation on the surface properties of titanium dental implants: A systematic review
- (2021) Isadora Gazott Simões et al. JOURNAL OF PROSTHETIC DENTISTRY
- Tuning Ta coating properties through chemical and plasma etching pre-treatment of NiTi wire substrates
- (2021) Ben Pace et al. SURFACE & COATINGS TECHNOLOGY
- Development of fiber flow finishing (FFF) process for polishing hip prostheses
- (2021) Yahya Choopani et al. Journal of Manufacturing Processes
- 3D printing technology; methods, biomedical applications, future opportunities and trends
- (2021) Yahya Bozkurt et al. Journal of Materials Research and Technology-JMR&T
- 3D-printed Ti6Al4V femoral component of knee: Improvements in wear and biological properties by AIP TiN and TiCrN coating
- (2021) JunJie Ni et al. Journal of Materials Research and Technology-JMR&T
- Synthesis and microstructure, properties characterization of Ni-Ti-Cu/Cu-Al functionally graded coating on Mg-Li alloy by laser cladding
- (2021) Lipeng Jiang et al. APPLIED SURFACE SCIENCE
- A comprehensive review on biocompatible thin films for biomedical application
- (2021) S. Thanka Rajan et al. CERAMICS INTERNATIONAL
- Elucidation of material removal mechanism in float polishing
- (2021) Anthony T.H. Beaucamp et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Nature-Based Biomaterials and Their Application in Biomedicine
- (2021) Eoin Troy et al. Polymers
- An experimental investigation of viscosity of a newly developed natural polymer-based media for abrasive flow machining (AFM) of 3D printed ABS parts
- (2021) Abdul Wahab Hashmi et al. Journal of Engineering Research
- Decellularized and biological scaffolds in dental and craniofacial tissue engineering: a comprehensive overview
- (2021) Mohsen Yazdanian et al. Journal of Materials Research and Technology-JMR&T
- Surface engineering of additively manufactured titanium alloys for enhanced clinical performance of biomedical implants: A review of recent developments
- (2021) V.M. Suntharavel Muthaiah et al. Bioprinting
- Regionalized modeling approach of tool influence function in magnetorheological finishing process for aspherical optics
- (2020) Shiwei Liu et al. OPTIK
- Impact of Cryogenic Treatment on HCF and FCP Performance of β-Solution Treated Ti-6Al-4V ELI Biomaterial
- (2020) Anil Kumar Singla et al. Materials
- Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting
- (2020) Chunyong Liang et al. Metals
- Rheological characterisation of abrasive media and finishing behaviours in abrasive flow machining
- (2020) Youzhi Fu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser polishing of additively manufactured Ti-6Al-4V: Microstructure evolution and material properties
- (2020) Juliana S. Solheid et al. JOURNAL OF LASER APPLICATIONS
- Polishing of Silicon Nitride Ceramic Balls by Clustered Magnetorheological Finish
- (2020) Xiao-lan Xiao et al. Micromachines
- Materials for Orthopedic Bioimplants: Modulating Degradation and Surface Modification Using Integrated Nanomaterials
- (2020) Harbhajan Ahirwar et al. Coatings
- Study on surface quality improvement of the plane magnetic abrasive finishing process
- (2020) Yanhua Zou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Advanced polishing, grinding and finishing processes for various manufacturing applications: a review
- (2020) Zhao-Wei Zhong MATERIALS AND MANUFACTURING PROCESSES
- Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review
- (2020) Md Al-Amin et al. MATERIALS AND MANUFACTURING PROCESSES
- Magnetorheological finishing of UHMWPE acetabular cup surface and its performance analysis
- (2020) Kunal Arora et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface and morphological modification of selectively laser melted titanium lattices using a chemical post treatment
- (2020) Nicolas Soro et al. SURFACE & COATINGS TECHNOLOGY
- Effects of Laser Shock Peening on Microstructure and Properties of Ti–6Al–4V Titanium Alloy Fabricated via Selective Laser Melting
- (2020) Liang Lan et al. Materials
- Influence of surface pre-treatment with mechanical polishing, chemical, electrochemical and ion sputter etching on the surface properties, corrosion resistance and MG-63 cell colonization of commercially pure titanium
- (2020) Petr Vlcak et al. Materials Science & Engineering C-Materials for Biological Applications
- High precision electrolytic polishing of Ni–Ti shape memory alloy for biomedical vascular stents
- (2020) Deokhyun Han et al. Materials Express
- Application of Plasma Electrolytic Oxidation Coating on Powder Metallurgy Ti-6Al-4V for Dental Implants
- (2020) Cristina Garcia-Cabezón et al. Metals
- Modeling and analysis of developed Thermal additive Centrifugal Abrasive Flow Machining process
- (2020) Parvesh Ali et al. Surface Topography-Metrology and Properties
- A review on magnetic abrasive finishing
- (2020) Cheng Qian et al. The International Journal of Advanced Manufacturing Technology
- Role of bovine serum albumin in the degradation of zirconia and its allotropes coated 316L SS for potential bioimplants
- (2020) Gobi Saravanan Kaliaraj et al. MATERIALS CHEMISTRY AND PHYSICS
- Biomedical evaluation of vacuum plasma sprayed tantalum coatings processed by alkali treatment and alkali-heat treatment with different NaOH concentrations
- (2020) S.H. Lin et al. SURFACE & COATINGS TECHNOLOGY
- Research on influence of heat treatment scheme of Ti10V2Fe3Al alloy on technological surface integrity after electrodischarge machining
- (2020) Agnieszka Żyra et al. Journal of Manufacturing Processes
- Study on the magnetic abrasive finishing process using alternating magnetic field: investigation of mechanism and applied to aluminum alloy plate
- (2019) Huijun Xie et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanism and Parameter Optimization in Grinding and Polishing of M300 Steel by an Elastic Abrasive
- (2019) Xin Tong et al. Materials
- Fundamental aspects and recent developments in electropolishing
- (2019) Wei Han et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance investigation of magnetorheological finishing of rolls surface in cold rolling process
- (2019) Manpreet Singh et al. Journal of Manufacturing Processes
- Effect of Laser Energy Density, Internal Porosity and Heat Treatment on Mechanical Behavior of Biomedical Ti6Al4V Alloy Obtained with DMLS Technology
- (2019) Mierzejewska Żaneta Anna Materials
- Cytocompatible and Anti-bacterial Adhesion Nanotextured Titanium Oxide Layer on Titanium Surfaces for Dental and Orthopedic Implants
- (2019) Sara Ferraris et al. Frontiers in Bioengineering and Biotechnology
- Impact of Cryogenic Treatment on Mechanical Behavior and Microstructure of Ti-6Al-4V ELI Biomaterial
- (2019) Anil Kumar Singla et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Zirconia in dental prosthetics: A literature review
- (2019) Jonathan Grech et al. Journal of Materials Research and Technology-JMR&T
- Obtaining tailored surface characteristics by combining shot peening and electropolishing on 316L stainless steel
- (2019) P. Lopez-Ruiz et al. APPLIED SURFACE SCIENCE
- Picosecond laser texturing on titanium alloy for biomedical implants in cell proliferation and vascularization
- (2019) Zhou Yu et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Electrochemical Polishing of Additively Manufactured Ti–6Al–4V Alloy
- (2019) Yifei Zhang et al. METALS AND MATERIALS INTERNATIONAL
- An atomic-scale and high efficiency finishing method of zirconia ceramics by using magnetorheological finishing
- (2018) Hu Luo et al. APPLIED SURFACE SCIENCE
- Viscoelastic medium modeling and surface roughness simulation of microholes finished by abrasive flow finishing process
- (2018) Sachin Singh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser polishing of thermoplastics fabricated using fused deposition modelling
- (2018) Yuan Chai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on complex micro surface finishing of alumina ceramic by the magnetic abrasive finishing process using alternating magnetic field
- (2018) Yanhua Zou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A newly developed media for magnetic abrasive finishing process: Material removal behavior and finishing performance
- (2018) Wenhui Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Differential finishing of freeform surfaces (knee joint) using R-MRAFF process and negative replica of workpiece as a fixture
- (2018) Leeladhar Nagdeve et al. MACHINING SCIENCE AND TECHNOLOGY
- The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response
- (2018) Bartłomiej Wysocki et al. Materials Science & Engineering C-Materials for Biological Applications
- Characterization of chemically treated Ti-Zr system alloys for dental implant application
- (2018) Jairo M. Cordeiro et al. Materials Science & Engineering C-Materials for Biological Applications
- Precision manufacturing of a lightweight mirror body made by selective laser melting
- (2018) Enrico Hilpert et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface design of Mg-Zn alloy temporary orthopaedic implants: Tailoring wettability and biodegradability using laser surface melting
- (2018) Bhaskar Manne et al. SURFACE & COATINGS TECHNOLOGY
- The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy
- (2018) Ruixia Zhang et al. SURFACE & COATINGS TECHNOLOGY
- Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization
- (2018) Yadir Torres et al. SURFACE & COATINGS TECHNOLOGY
- Tribo-corrosion performance of filtered-arc-deposited tantalum coatings on Ti-13Nb-13Zr alloy for bio-implants applications
- (2018) Ay Ching Hee et al. WEAR
- Polishing Progress of Elastic Abrasive Based on Microporous Silicone Gel Composites
- (2018) Ning Li et al. Science of Advanced Materials
- State of the art of bioimplants manufacturing: part I
- (2018) Cheng-Wei Kang et al. Advances in Manufacturing
- State of the art of bioimplants manufacturing: part II
- (2018) Cheng-Wei Kang et al. Advances in Manufacturing
- Effect of ultrasonic vibration-assisted laser surface melting and texturing of Ti-6Al-4V ELI alloy on surface properties
- (2018) Sourabh Biswas et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Contact Deformation Behavior of an Elastic Silicone/SiC Abrasive in Grinding and Polishing
- (2018) N. Li et al. STRENGTH OF MATERIALS
- Laser coating of bioactive glasses on bioimplant titanium alloys
- (2018) Po-Hsuen Kuo et al. International Journal of Applied Glass Science
- Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
- (2018) Rushikesh Sabban et al. ACTA MATERIALIA
- Study on key parameters of a new abrasive flow machining (AFM) process for surface finishing
- (2018) Tingting Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimizing mechanical property and cytocompatibility of the biodegradable Mg-Zn-Y-Nd alloy by hot extrusion and heat treatment
- (2018) Yiyuan Kang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue performances of selective laser melted Ti-6Al-4V alloy: Influence of surface finishing, hot isostatic pressing and heat treatments
- (2018) Hanchen Yu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface modification of valve metals using plasma electrolytic oxidation for antibacterial applications: A review
- (2017) Muhammad Rizwan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Concept and Mechanics of Fine Finishing Circular Internal Surfaces Using Deployable Magneto-Elastic Abrasive Tool
- (2017) V. S. Sooraj JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components
- (2017) V. Urlea et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Simulation and experimental investigations into abrasive flow nanofinishing of surgical stainless steel tubes
- (2017) Sachin Singh et al. MACHINING SCIENCE AND TECHNOLOGY
- A study on the effect of polishing fluid volume in ball end magnetorheological finishing process
- (2017) Zafar Alam et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental analysis of magneto rheological abrasive flow finishing process on AISI stainless steel 316L
- (2017) S. Kathiresan et al. MATERIALS AND MANUFACTURING PROCESSES
- Synthesis of polishing fluid and novel approach for nanofinishing of copper using ball-end magnetorheological finishing process
- (2017) Dilshad Ahmad Khan et al. MATERIALS AND MANUFACTURING PROCESSES
- Recent developments in abrasive flow finishing process: A review of current research and future prospects
- (2017) Jaikishan Sambharia et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Metallic implant biomaterials
- (2015) Qizhi Chen et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Nanofinishing of freeform surfaces (knee joint implant) by rotational-magnetorheological abrasive flow finishing (R-MRAFF) process
- (2015) Satish Kumar et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface finishing of cobalt chromium alloy femoral knee components
- (2014) Hitomi Yamaguchi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper
- (2013) E. Mohseni et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Improvement in mechanical properties of plasma sprayed hydroxyapatite coatings by Al2O3 reinforcement
- (2013) Manoj Mittal et al. Materials Science & Engineering C-Materials for Biological Applications
- Biomedical coatings on magnesium alloys – A review
- (2012) H. Hornberger et al. Acta Biomaterialia
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Tantalum-based multilayer coating on cobalt alloys in total hip and knee replacement
- (2012) C. Balagna et al. Materials Science & Engineering C-Materials for Biological Applications
- Engineering biocompatible implant surfaces
- (2012) Sebastian Bauer et al. PROGRESS IN MATERIALS SCIENCE
- Effective solution for the tribological problems of Ti-6Al-4V: Combination of laser surface texturing and solid lubricant film
- (2012) Tianchang Hu et al. SURFACE & COATINGS TECHNOLOGY
- Enhancing biocompatibility and corrosion resistance of Mg implants via surface treatments
- (2011) Ji-Hoon Jo et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting
- (2011) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ion implantation of titanium based biomaterials
- (2011) Tapash R. Rautray et al. PROGRESS IN MATERIALS SCIENCE
- Manufacturing and processing of NiTi implants: A review
- (2011) Mohammad H. Elahinia et al. PROGRESS IN MATERIALS SCIENCE
- The biological and toxicological importance of molybdenum in the environment and in the nutrition of plants, animals and man
- (2010) M. Anke et al. ACTA ALIMENTARIA
- Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces
- (2010) Y.B. Guo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adhesion failure behavior of sputtered calcium phosphate thin film coatings evaluated using microscratch testing
- (2010) J.A. Toque et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications
- (2009) Xiao-Bo Chen et al. Acta Biomaterialia
- Porous titanium scaffolds produced by powder metallurgy for biomedical applications
- (2009) Luana Marotta Reis de Vasconcellos et al. Materials Research-Ibero-american Journal of Materials
- Effect of thermal treatment and applied potential on the electrochemical behaviour of CoCrMo biomedical alloy
- (2008) C. Valero Vidal et al. ELECTROCHIMICA ACTA
- Review Paper: Behavior of Ceramic Biomaterials Derived from Tricalcium Phosphate in Physiological Condition
- (2008) Masanobu Kamitakahara et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- Modification of mechanical properties of sintered implant materials on the base of Co–Cr–Mo alloy
- (2007) M. Grądzka-Dahlke et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology
- (2007) Ola L.A. Harrysson et al. Materials Science & Engineering C-Materials for Biological Applications
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation