Review on Porous Scaffolds Generation Process: A Tissue Engineering Approach

Volumetric Bioprinting of Organoids and Optically Tuned Hydrogels to Build Liver‐Like Metabolic Biofactories

(2022) Paulina Nuñez Bernal et al.   ADVANCED MATERIALS

Fabrication and Characterization of Alveolus-Like Scaffolds with Control of the Pore Architecture and Gas Permeability

(2022) Lanxin Lü et al.   Stem Cells International

Hierarchical Porous Ceramics with Distinctive Microstructures by Emulsion-Based Direct Ink Writing

(2022) Quyang Liu et al.   ACS Applied Materials & Interfaces

Effects of Scaffold Shape on Bone Regeneration: Tiny Shape Differences Affect the Entire System

(2022) Koichiro Hayashi et al.   ACS Nano

In situ 3D bioprinting with bioconcrete bioink

(2022) Mingjun Xie et al.   Nature Communications

Bioactive Cell-Derived ECM Scaffold Forms a Unique Cellular Microenvironment for Lung Tissue Engineering

(2022) Ali Doryab et al.   Biomedicines

Nanocomposites based on doped ZnO nanoparticles for antibacterial applications

(2022) Diego E. Navarro-López et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Collective curvature sensing and fluidity in three-dimensional multicellular systems

(2022) Wenhui Tang et al.   Nature Physics

Tunable and Compartmentalized Multimaterial Bioprinting for Complex Living Tissue Constructs

(2022) Shabir Hassan et al.   ACS Applied Materials & Interfaces

Negligible-cost microfluidic device fabrication using 3D-printed interconnecting channel scaffolds

(2021) Harry Felton et al.   PLoS One

Hydrolytic degradation of porous poly(hydroxybutyrate-co-hydroxyvalerate) scaffolds manufactured using selective laser sintering

(2021) Rushabh Patel et al.   POLYMER DEGRADATION AND STABILITY

High-Throughput and Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms

(2021) Carlos Fernando Ceballos-González et al.   ACS Biomaterials-Science & Engineering

Exploring the interconnectivity of biomimetic hierarchical porous Mg scaffolds for bone tissue engineering: Effects of pore size distribution on mechanical properties, degradation behavior and cell migration ability

(2021) Gaozhi Jia et al.   Journal of Magnesium and Alloys

Ice Templating Soft Matter: Fundamental Principles and Fabrication Approaches to Tailor Pore Structure and Morphology and Their Biomedical Applications

(2021) Habib Joukhdar et al.   ADVANCED MATERIALS

Microfluidic 3D Printing of a Photo-Cross-Linkable Bioink Using Insights from Computational Modeling

(2021) Bahram Mirani et al.   ACS Biomaterials-Science & Engineering

Emerging Technologies in Multi‐Material Bioprinting

(2021) Hossein Ravanbakhsh et al.   ADVANCED MATERIALS

Development and clinical translation of tubular constructs for tracheal tissue engineering: a review

(2021) Luis Soriano et al.   European Respiratory Review

PoreScript: Semi-automated pore size algorithm for scaffold characterization

(2021) Dana Jenkins et al.   Bioactive Materials

Modification of pore‐wall in direct ink writing wollastonite scaffolds favorable for tuning biodegradation and mechanical stability and enhancing osteogenic capability

(2020) Xiurong Ke et al.   FASEB JOURNAL

Characterization of novel calcium hydroxide‐mediated highly porous chitosan‐calcium scaffolds for potential application in dentin tissue engineering

(2020) Diana Gabriela Soares et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Aminated 3D Printed Polystyrene Maintains Stem Cell Proliferation and Osteogenic Differentiation

(2020) Max J. Lerman et al.   TISSUE ENGINEERING PART C-METHODS

3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat

(2020) Andrew McCormack et al.   TRENDS IN BIOTECHNOLOGY

Cellular Geometry Sensing at Different Length Scales and its Implications for Scaffold Design

(2020) Maike Werner et al.   Materials

3D Patterning of cells in Magnetic Scaffolds for Tissue Engineering

(2020) V. Goranov et al.   Scientific Reports

Mechanical stimulation improves osteogenesis and the mechanical properties of osteoblast‐laden RGD ‐functionalized polycaprolactone/hydroxyapatite scaffolds

(2020) Ali A. Salifu et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

MicroCT analysis of connectivity in porous structures: optimizing data acquisition and analytical methods in the context of tissue engineering

(2020) Malavika Nair et al.   Journal of the Royal Society Interface

Using chaotic advection for facile high-throughput fabrication of ordered multilayer micro- and nanostructures: continuous chaotic printing

(2020) Carolina Chávez-Madero et al.   Biofabrication

Bioprintable tough hydrogels for tissue engineering applications

(2020) Pramod Dorishetty et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Magnetically actuated bone scaffold: Microstructure, cell response and osteogenesis

(2020) Cijun Shuai et al.   COMPOSITES PART B-ENGINEERING

Development of GelMA/PCL and dECM/PCL resins for 3D printing of acellular in vitro tissue scaffolds by stereolithography

(2020) Laura Elomaa et al.   Materials Science & Engineering C-Materials for Biological Applications

Effect of Geometric Curvature on Collective Cell Migration in Tortuous Microchannel Devices

(2020) Mazlee Bin Mazalan et al.   Micromachines

The Overview of Porous, Bioactive Scaffolds as Instructive Biomaterials for Tissue Regeneration and Their Clinical Translation

(2020) Gaëtan Lutzweiler et al.   Pharmaceutics

Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review

(2020) Hao Chen et al.   Frontiers in Bioengineering and Biotechnology

3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool

(2020) María Puertas-Bartolomé et al.   Polymers

A thermal bonding method for manufacturing Micromegas detectors

(2020) Jianxin Feng et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT

Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting

(2019) Ashley M. Compaan et al.   ACS Applied Materials & Interfaces

Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffolds with improved mechanical strength for bone tissue engineering

(2019) S. Sahmani et al.   European Physical Journal Plus

3D printing of sacrificial templates into hierarchical porous materials

(2019) Lauriane Alison et al.   Scientific Reports

Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces

(2019) Masoud Zhianmanesh et al.   ACS Biomaterials-Science & Engineering

Fabrication and improvement of PCL/alginate/PAAM scaffold via selective laser sintering for tissue engineering

(2019) Jinzhe Wu et al.   Micro & Nano Letters

Incorporation of hydroxyapatite into nanofibrous PLGA scaffold towards improved breast cancer cell behavior

(2019) Honglin Luo et al.   MATERIALS CHEMISTRY AND PHYSICS

CoCr porous scaffolds manufactured via selective laser melting in orthopedics: Topographical, mechanical, and biological characterization

(2019) Paolo Caravaggi et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Engineering Porous β-Tricalcium Phosphate (β-TCP) Scaffolds with Multiple Channels to Promote Cell Migration, Proliferation, and Angiogenesis

(2019) Xuesong Wang et al.   ACS Applied Materials & Interfaces

Porous Phosphate-Based Glass Microspheres Show Biocompatibility, Tissue Infiltration, and Osteogenic Onset in an Ovine Bone Defect Model

(2019) Jane S. MLaren et al.   ACS Applied Materials & Interfaces

Time‐of‐Flight Secondary Ion Mass Spectrometry Three‐Dimensional Imaging of Surface Modifications in poly (caprolactone) Scaffold Pores

(2019) M. J Taylor et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Multivascular networks and functional intravascular topologies within biocompatible hydrogels

(2019) Bagrat Grigoryan et al.   SCIENCE

Printability and cell viability in bioprinting alginate dialdehyde-gelatin scaffolds

(2019) Nikoo Soltan et al.   ACS Biomaterials-Science & Engineering

3D Printing of Salt as a Template for Magnesium with Structured Porosity

(2019) Nicole Kleger et al.   ADVANCED MATERIALS

Effect of scaffold architecture on cell seeding efficiency: A discrete phase model CFD analysis

(2019) Davar Ali   COMPUTERS IN BIOLOGY AND MEDICINE

Fabrication and characterization of super-paramagnetic responsive PLGA-Gelatin-Magnetite scaffolds with the unidirectional porous structure:a physicochemical mechanical and in-vitro evaluation

(2019) Farnaz Ghorbani et al.   IET Nanobiotechnology

Cell patterning via optimized dielectrophoretic force within hexagonal electrodes in vitro for skin tissue engineering

(2019) Zhijie Huan et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Recent Trends of Foaming in Polymer Processing: A Review

(2019) Fan-Long Jin et al.   Polymers

Coaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GelMA Blend Bioink

(2019) Ying Wang et al.   ACS Biomaterials-Science & Engineering

Surface tension determines tissue shape and growth kinetics

(2019) S. Ehrig et al.   Science Advances

Triple PLGA/PCL Scaffold Modification Including Silver Impregnation, Collagen Coating, and Electrospinning Significantly Improve Biocompatibility, Antimicrobial, and Osteogenic Properties for Orofacial Tissue Regeneration

(2019) Yunzhu Qian et al.   ACS Applied Materials & Interfaces

A bioinspired 3D shape olibanum‐collagen‐gelatin scaffolds with tunable porous microstructure for efficient neural tissue regeneration

(2019) Farnaz Ghorbani et al.   BIOTECHNOLOGY PROGRESS

Voxelated soft matter via multimaterial multinozzle 3D printing

(2019) Mark A. Skylar-Scott et al.   NATURE

Mechanical degradation model of porous magnesium scaffolds under dynamic immersion

(2019) Hasan Basri et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS

Substrate curvature as a cue to guide spatiotemporal cell and tissue organization

(2019) Sebastien J.P. Callens et al.   BIOMATERIALS

Hydroxylapatite‐collagen hybrid scaffold induces human adipose‐derived mesenchymal stem cells to osteogenic differentiation in vitro and bone regrowth in patients

(2019) Elisa Mazzoni et al.   Stem Cells Translational Medicine

Multi-material 3D bioprinting of porous constructs for cartilage regeneration

(2019) Laura Ruiz-Cantu et al.   Materials Science & Engineering C-Materials for Biological Applications

3D printed microchannel networks to direct vascularisation during endochondral bone repair

(2018) Andrew C. Daly et al.   BIOMATERIALS

Acoustic and mechanical characterization of 3D printed scaffolds for tissue engineering applications

(2018) Mitra Aliabouzar et al.   Biomedical Materials

Development of Biomimetic Hybrid Porous Scaffold of Chitosan/Polyvinyl Alcohol/Carboxymethyl Cellulose by Freeze-Dried and Salt Leached Technique

(2018) K Kanimozhi et al.   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY

Self-Folded Hydrogel Tubes for Implantable Muscular Tissue Scaffolds

(2018) Lorenzo Vannozzi et al.   MACROMOLECULAR BIOSCIENCE

Three-dimensional printed PLA scaffold and human gingival stem cell-derived extracellular vesicles: a new tool for bone defect repair

(2018) Francesca Diomede et al.   Stem Cell Research & Therapy

3D Bioprinting of Self-Standing Silk-Based Bioink

(2018) Zhaozhu Zheng et al.   Advanced Healthcare Materials

Functional Multichannel Poly(Propylene Fumarate)-Collagen Scaffold with Collagen-Binding Neurotrophic Factor 3 Promotes Neural Regeneration After Transected Spinal Cord Injury

(2018) Xi Chen et al.   Advanced Healthcare Materials

Engineering Anisotropic Muscle Tissue using Acoustic Cell Patterning

(2018) James P. K. Armstrong et al.   ADVANCED MATERIALS

Note on the use of different approaches to determine the pore sizes of tissue engineering scaffolds: what do we measure?

(2018) Martin Bartoš et al.   Biomedical Engineering Online

Surface entrapment of chitosan on 3D printed polylactic acid scaffold and its biomimetic growth of hydroxyapatite

(2018) Jian Wang et al.   COMPOSITE INTERFACES

Fiber-Based Mini Tissue with Morphology-Controllable GelMA Microfibers

(2018) Lei Shao et al.   Small

Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

(2018) Alice Cheng et al.   TISSUE ENGINEERING PART B-REVIEWS

Curvotaxis directs cell migration through cell-scale curvature landscapes

(2018) Laurent Pieuchot et al.   Nature Communications

3D Printing of Porous Scaffolds with Controlled Porosity and Pore Size Values

(2018) Irene Buj-Corral et al.   Materials

Characterization and Preliminary Biological Evaluation of 3D-Printed Porous Scaffolds for Engineering Bone Tissues

(2018) Chen-Guang Liu et al.   Materials

Curvature- and fluid-stress-driven tissue growth in a tissue-engineering scaffold pore

(2018) P. Sanaei et al.   Biomechanics and Modeling in Mechanobiology

Macroporous nanofibrous vascular scaffold with improved biodegradability and smooth muscle cells infiltration prepared by dual phase separation technique

(2018) Weizhong Wang et al.   International Journal of Nanomedicine

The 3D imaging of mesenchymal stem cells on porous scaffolds using high-contrasted x-ray computed nanotomography

(2018) L. VOJTOVÁ et al.   JOURNAL OF MICROSCOPY

Layered manufacturing of a three-dimensional polymethyl methacrylate (PMMA) scaffold used for bone regeneration

(2018) Alireza Matbouei et al.   MATERIALS TECHNOLOGY

Functional Hydrogels With Tunable Structures and Properties for Tissue Engineering Applications

(2018) Xiaomeng Li et al.   Frontiers in Chemistry

Fabrication and tissue engineering application of a 3D PPF/DEF scaffold using Blu-ray based 3D printing system

(2017) Jae-Hun Kim et al.   Journal of Mechanical Science and Technology

Biphasic calcium phosphate scaffolds fabricated by direct write assembly: Mechanical, anti-microbial and osteoblastic properties

(2017) Catarina F. Marques et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Systematic characterization of porosity and mass transport and mechanical properties of porous polyurethane scaffolds

(2017) Yu-Fu Wang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Silver doped resorbable tricalcium phosphate scaffolds for bone graft applications

(2017) Sean Hoover et al.   Materials Science & Engineering C-Materials for Biological Applications

Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering

(2017) Cambre N. Kelly et al.   Advanced Healthcare Materials

A 3D graphene coated bioglass scaffold for bone defect therapy based on the molecular targeting approach

(2017) Yulan Wang et al.   Journal of Materials Chemistry B

Microfluidic Bioprinting for Engineering Vascularized Tissues and Organoids

(2017) Yu Shrike Zhang et al.   Jove-Journal of Visualized Experiments

Embedded Multimaterial Extrusion Bioprinting

(2017) Marco Rocca et al.   SLAS Technology

Micropore-induced capillarity enhances bone distribution in vivo in biphasic calcium phosphate scaffolds

(2016) Laurence E. Rustom et al.   Acta Biomaterialia

Cell sheet mechanics: How geometrical constraints induce the detachment of cell sheets from concave surfaces

(2016) Tadahiro Yamashita et al.   Acta Biomaterialia

Design and properties of 3D scaffolds for bone tissue engineering

(2016) S. Gómez et al.   Acta Biomaterialia

2D µ-Particle Image Velocimetry and Computational Fluid Dynamics Study Within a 3D Porous Scaffold

(2016) A. Campos Marin et al.   ANNALS OF BIOMEDICAL ENGINEERING

Coupling curvature-dependent and shear stress-stimulated neotissue growth in dynamic bioreactor cultures: a 3D computational model of a complete scaffold

(2016) Y. Guyot et al.   Biomechanics and Modeling in Mechanobiology

Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology

(2016) Guk Bae Kim et al.   KOREAN JOURNAL OF RADIOLOGY

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

(2016) Hyun-Wook Kang et al.   NATURE BIOTECHNOLOGY

Geometry Design Optimization of Functionally Graded Scaffolds for Bone Tissue Engineering: A Mechanobiological Approach

(2016) Antonio Boccaccio et al.   PLoS One

Fabrication of chitosan/bioactive glass composite scaffolds for medical applications

(2016) Diana Marcela Escobar-Sierra et al.   Revista Facultad de Ingenieria-Universidad de Antioquia

Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes

(2016) Mitra Asadi-Eydivand et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

Designer porous antibacterial membranes derived from thermally induced phase separation of PS/PVME blends decorated with an electrospun nanofiber scaffold

(2016) Priti Xavier et al.   RSC Advances

3D Bioprinting Using a Templated Porous Bioink

(2016) James P. K. Armstrong et al.   Advanced Healthcare Materials

Rational Design of Prevascularized Large 3D Tissue Constructs Using Computational Simulations and Biofabrication of Geometrically Controlled Microvessels

(2016) Chiara Arrigoni et al.   Advanced Healthcare Materials

Hierarchical Fabrication of Engineered Vascularized Bone Biphasic Constructs via Dual 3D Bioprinting: Integrating Regional Bioactive Factors into Architectural Design

(2016) Haitao Cui et al.   Advanced Healthcare Materials

3D Printing of Porous Cell-Laden Hydrogel Constructs for Potential Applications in Cartilage Tissue Engineering

(2016) Fu You et al.   ACS Biomaterials-Science & Engineering

Surface Curvature Differentially Regulates Stem Cell Migration and Differentiation via Altered Attachment Morphology and Nuclear Deformation

(2016) Maike Werner et al.   Advanced Science

3D Printing of Porous Cell-Laden Hydrogel Constructs for Potential Applications in Cartilage Tissue Engineering

(2016) Fu You et al.   ACS Biomaterials Science & Engineering

Agent-based modeling of porous scaffold degradation and vascularization: Optimal scaffold design based on architecture and degradation dynamics

(2015) Hamidreza Mehdizadeh et al.   Acta Biomaterialia

3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures

(2015) Sungmin Hong et al.   ADVANCED MATERIALS

Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery

(2015) Qing Gao et al.   BIOMATERIALS

Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility

(2015) Yingying Du et al.   COLLOIDS AND SURFACES B-BIOINTERFACES

Enhancing structural integrity of hydrogels by using highly organised melt electrospun fibre constructs

(2015) Onur Bas et al.   EUROPEAN POLYMER JOURNAL

In vivobiocompatibility of custom-fabricated apatite-wollastonite-mesenchymal stromal cell constructs

(2015) Jennifer A. Lee et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Liquid flow in polyurethane foams for filtration applications: a study on their characterization and permeability estimation

(2015) Subhashini Gunashekar et al.   JOURNAL OF POROUS MATERIALS

Fabrication of scalable and structured tissue engineering scaffolds using water dissolvable sacrificial 3D printed moulds

(2015) Soumyaranjan Mohanty et al.   Materials Science & Engineering C-Materials for Biological Applications

A facile method to determine pore size distribution in porous scaffold by using image processing

(2015) G. Lo Re et al.   MICRON

Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering

(2015) Alida Mazzoli et al.   RAPID PROTOTYPING JOURNAL

Bone tissue regeneration: the role of scaffold geometry

(2015) Amir A. Zadpoor   Biomaterials Science

Simple 3D Printed Scaffold-Removal Method for the Fabrication of Intricate Microfluidic Devices

(2015) Vittorio Saggiomo et al.   Advanced Science

Writing in the granular gel medium

(2015) T. Bhattacharjee et al.   Science Advances

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

(2015) T. J. Hinton et al.   Science Advances

A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering

(2014) Matthew J. Webber et al.   ANNALS OF BIOMEDICAL ENGINEERING

Creating perfused functional vascular channels using 3D bio-printing technology

(2014) Vivian K. Lee et al.   BIOMATERIALS

Modeling of the degradation kinetics of biodegradable scaffolds: The effects of the environmental conditions

(2014) Marcin K. Heljak et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Evaluation of the influences of process parameters while selective laser sintering PMMA powders

(2014) Rajkumar Velu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Cryotemplation for the rapid fabrication of porous, patternable photopolymerized hydrogels

(2014) Aline M. Thomas et al.   Journal of Materials Chemistry B

Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method

(2013) M. Alizadeh et al.   Materials Science & Engineering C-Materials for Biological Applications

Bone tissue engineering using 3D printing

(2013) Susmita Bose et al.   Materials Today

Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size

(2013) Qiu Li Loh et al.   TISSUE ENGINEERING PART B-REVIEWS

Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering

(2013) Cijun Shuai et al.   Biofabrication

Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering

(2013) Loek D. Loozen et al.   Journal of Materials Chemistry B

The interplay between tissue growth and scaffold degradation in engineered tissue constructs

(2012) R. D. O’Dea et al.   JOURNAL OF MATHEMATICAL BIOLOGY

Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues

(2012) Jordan S. Miller et al.   NATURE MATERIALS

Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives

(2011) Qiang Fu et al.   Materials Science & Engineering C-Materials for Biological Applications

Mathematically defined tissue engineering scaffold architectures prepared by stereolithography

(2010) Ferry P.W. Melchels et al.   BIOMATERIALS

Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering

(2010) Lutz-Christian Gerhardt et al.   Materials

Considerations for Tissue-Engineered and Regenerative Medicine Product Development Prior to Clinical Trials in the United States

(2009) Mark H. Lee et al.   TISSUE ENGINEERING PART B-REVIEWS