Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering
Published 2017 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering
Authors
Keywords
-
Journal
Advanced Healthcare Materials
Volume 7, Issue 7, Pages 1701095
Publisher
Wiley
Online
2017-12-27
DOI
10.1002/adhm.201701095
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
- (2017) M. Speirs et al. Journal of the Mechanical Behavior of Biomedical Materials
- Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
- (2017) Michaela Fousová et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanics of additively manufactured biomaterials
- (2017) Amir A. Zadpoor Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue of injection molded and 3D printed polycarbonate urethane in solution
- (2017) Andrew T. Miller et al. POLYMER
- Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting
- (2016) Furqan A. Shah et al. Acta Biomaterialia
- Viscoelastic properties of human and bovine articular cartilage: a comparison of frequency-dependent trends
- (2016) Duncan K. Temple et al. BMC MUSCULOSKELETAL DISORDERS
- Enhanced Osteoblast Response to Porosity and Resolution of Additively Manufactured Ti-6Al-4V Constructs with Trabeculae-Inspired Porosity
- (2016) Alice Cheng et al. 3D Printing and Additive Manufacturing
- High-strength, surface-porous polyether-ether-ketone for load-bearing orthopedic implants
- (2015) Nathan T. Evans et al. Acta Biomaterialia
- Additively manufactured porous tantalum implants
- (2015) Ruben Wauthle et al. Acta Biomaterialia
- 3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
- (2015) Derek Rosenzweig et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
- (2015) Swee Leong Sing et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications
- (2015) Sophie C. Cox et al. Materials Science & Engineering C-Materials for Biological Applications
- Bioresorbable scaffolds for bone tissue engineering: Optimal design, fabrication, mechanical testing and scale-size effects analysis
- (2015) Pedro G. Coelho et al. MEDICAL ENGINEERING & PHYSICS
- A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
- (2015) Seyed Farid Seyed Shirazi et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Bone tissue regeneration: the role of scaffold geometry
- (2015) Amir A. Zadpoor Biomaterials Science
- Bone regeneration performance of surface-treated porous titanium
- (2014) Saber Amin Yavari et al. BIOMATERIALS
- Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
- (2014) S.M. Ahmadi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Optimization of scaffold design for bone tissue engineering: A computational and experimental study
- (2014) Marta R. Dias et al. MEDICAL ENGINEERING & PHYSICS
- Synergistic effect of surface modification and scaffold design of bioplotted 3-D poly-ε-caprolactone scaffolds in osteogenic tissue engineering
- (2013) Heidi A. Declercq et al. Acta Biomaterialia
- In vitro assessment of three-dimensionally plotted nagelschmidtite bioceramic scaffolds with varied macropore morphologies
- (2013) Mengchi Xu et al. Acta Biomaterialia
- Current trends in the design of scaffolds for computer-aided tissue engineering
- (2013) S.M. Giannitelli et al. Acta Biomaterialia
- Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
- (2013) Lore Thijs et al. ACTA MATERIALIA
- Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting
- (2013) S. Amin Yavari et al. APPLIED SURFACE SCIENCE
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
- (2013) Siamak Eqtesadi et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Osteogenesis of adipose-derived stem cells on polycaprolactone-β-tricalcium phosphate scaffold fabricated via selective laser sintering and surface coating with collagen type I
- (2013) Han-Tsung Liao et al. Journal of Tissue Engineering and Regenerative Medicine
- Flexible and Elastic Scaffolds for Cartilage Tissue Engineering Prepared by Stereolithography Using Poly(trimethylene carbonate)-Based Resins
- (2013) Sigrid Schüller-Ravoo et al. MACROMOLECULAR BIOSCIENCE
- Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs
- (2013) Wouter Schuurman et al. MACROMOLECULAR BIOSCIENCE
- Fatigue behavior of porous biomaterials manufactured using selective laser melting
- (2013) S. Amin Yavari et al. Materials Science & Engineering C-Materials for Biological Applications
- Strut size and surface area effects on long-term in vivo degradation in computer designed poly(l-lactic acid) three-dimensional porous scaffolds
- (2012) Eiji Saito et al. Acta Biomaterialia
- Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone–hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering
- (2012) Shaun Eshraghi et al. Acta Biomaterialia
- High-resolution PLA-based composite scaffolds via 3-D printing technology
- (2012) T. Serra et al. Acta Biomaterialia
- Fabrication of porous titanium implants by three-dimensional printing and sintering at different temperatures
- (2012) Yaoyang XIONG et al. DENTAL MATERIALS JOURNAL
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Computationally generated cross-property bounds for stiffness and fluid permeability using topology optimization
- (2012) Vivien J. Challis et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evaluation of borate bioactive glass scaffolds with different pore sizes in a rat subcutaneous implantation model
- (2012) Aylin M Deliormanlı et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Effect of pore architecture and stacking direction on mechanical properties of solid freeform fabrication-based scaffold for bone tissue engineering
- (2012) Jung-Seob Lee et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
- (2012) Jyrki Korpela et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering
- (2012) Solaiman Tarafder et al. Journal of Tissue Engineering and Regenerative Medicine
- The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
- (2012) T. Habijan et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of process parameters on the morphological and mechanical properties of 3D Bioextruded poly(ε‐caprolactone) scaffolds
- (2012) M. Domingos et al. RAPID PROTOTYPING JOURNAL
- Preparation and characterization of a three-dimensional printed scaffold based on a functionalized polyester for bone tissue engineering applications
- (2011) Hajar Seyednejad et al. Acta Biomaterialia
- Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental study
- (2011) S. Truscello et al. Acta Biomaterialia
- Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
- (2011) S.J. Li et al. ACTA MATERIALIA
- Minimal surface scaffold designs for tissue engineering
- (2011) Sebastian C. Kapfer et al. BIOMATERIALS
- Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
- (2011) Nikolas W. Hrabe et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Effect of Polycaprolactone Scaffold Permeability on Bone Regeneration In Vivo
- (2011) Anna G. Mitsak et al. TISSUE ENGINEERING PART A
- Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing
- (2010) Ferry P.W. Melchels et al. Acta Biomaterialia
- Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
- (2010) Shaun Eshraghi et al. Acta Biomaterialia
- Commentary: Deciphering the link between architecture and biological response of a bone graft substitute
- (2010) M. Bohner et al. Acta Biomaterialia
- Three-dimensional poly(1,8-octanediol–co-citrate) scaffold pore shape and permeability effects on sub-cutaneous in vivo chondrogenesis using primary chondrocytes
- (2010) Claire G. Jeong et al. Acta Biomaterialia
- Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments
- (2010) Deepak K. Pattanayak et al. Acta Biomaterialia
- Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds
- (2010) N. Sudarmadji et al. Acta Biomaterialia
- Prototypes for Bone Implant Scaffolds Designed via Topology Optimization and Manufactured by Solid Freeform Fabrication
- (2010) Vivien J. Challis et al. ADVANCED ENGINEERING MATERIALS
- Enhanced Cell Ingrowth and Proliferation through Three-Dimensional Nanocomposite Scaffolds with Controlled Pore Structures
- (2010) Kee-Won Lee et al. BIOMACROMOLECULES
- A comparison of the influence of material on in vitro cartilage tissue engineering with PCL, PGS, and POC 3D scaffold architecture seeded with chondrocytes
- (2010) Claire G. Jeong et al. BIOMATERIALS
- Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering
- (2010) Su A Park et al. BIOPROCESS AND BIOSYSTEMS ENGINEERING
- Fused deposition modeling of patient‐specific polymethylmethacrylate implants
- (2010) David Espalin et al. RAPID PROTOTYPING JOURNAL
- Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity
- (2010) Heesuk Kang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Mechanical and Biochemical Assessments of Three-Dimensional Poly(1,8-Octanediol-co-Citrate) Scaffold Pore Shape and Permeability Effects on In Vitro Chondrogenesis Using Primary Chondrocytes
- (2010) Claire G. Jeong et al. TISSUE ENGINEERING PART A
- Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
- (2010) Kyobum Kim et al. TISSUE ENGINEERING PART B-REVIEWS
- Differential effects of designed scaffold permeability on chondrogenesis by chondrocytes and bone marrow stromal cells
- (2009) Jessica M. Kemppainen et al. BIOMATERIALS
- Multiobjective topology optimization for finite periodic structures
- (2009) Yuhang Chen et al. COMPUTERS & STRUCTURES
- The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in anin vivomodel
- (2009) Sara M. Mantila Roosa et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- Cell adhesion and proliferation evaluation of SFF-based biodegradable scaffolds fabricated using a multi-head deposition system
- (2009) Jong Young Kim et al. Biofabrication
- Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
- (2008) Peter Heinl et al. Acta Biomaterialia
- Selective Electron Beam Melting of Cellular Titanium: Mechanical Properties
- (2008) P. Heinl et al. ADVANCED ENGINEERING MATERIALS
- Fumaric Acid Monoethyl Ester-Functionalized Poly(d,l-lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography
- (2008) Janine Jansen et al. BIOMACROMOLECULES
- Dynamics ofin vitropolymer degradation of polycaprolactone-based scaffolds: accelerated versus simulated physiological conditions
- (2008) Christopher X F Lam et al. Biomedical Materials
- Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
- (2008) Hung-Jen Yen et al. BIOMEDICAL MICRODEVICES
- Proliferation and Differentiation of Human Osteoblasts within 3D printed Poly-Lactic-co-Glycolic Acid Scaffolds
- (2008) Zigang Ge et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications
- (2008) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Blended PCL/PLGA scaffold fabrication using multi-head deposition system
- (2008) Jong Young Kim et al. MICROELECTRONIC ENGINEERING
- Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
- (2007) Pedro Miranda et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Engineering functionally graded tissue engineering scaffolds
- (2007) K LEONG et al. Journal of the Mechanical Behavior of Biomedical Materials
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started