Synergistic impact of eco-friendly nano-lubricants on the grindability of AISI H13 tool steel: A study towards clean manufacturing
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Synergistic impact of eco-friendly nano-lubricants on the grindability of AISI H13 tool steel: A study towards clean manufacturing
Authors
Keywords
-
Journal
Journal of Cleaner Production
Volume 364, Issue -, Pages 132686
Publisher
Elsevier BV
Online
2022-06-15
DOI
10.1016/j.jclepro.2022.132686
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Evaluation of the use of vegetable oils in the grinding of AISI 4340 steel
- (2022) Leonardo Roberto da Silva et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmental, technological and economical aspects of cryogenic assisted hard machining operation of inconel 718: A step towards green manufacturing
- (2022) Mohd Danish et al. Journal of Cleaner Production
- Review of synthesis, characteristics and technical challenges of biodiesel based drilling fluids
- (2022) Amany A. Aboulrous et al. Journal of Cleaner Production
- Influence of MQL on performance evaluation of EN19 steel under centreless grinding
- (2022) N.E. Arun kumar et al. MATERIALS AND MANUFACTURING PROCESSES
- The sono-photocatalytic performance of a Fe2O3 coated TiO2 based hybrid nanofluid under visible light via RSM
- (2022) Manjakuppam Malika et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- More sustainable vegetable oil: Balancing productivity with carbon storage opportunities
- (2022) Thomas D. Alcock et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect
- (2021) Danil Yu. Pimenov et al. Journal of Materials Research and Technology-JMR&T
- Temperature of Grinding Carbide With Castor Oil-Based MoS2 Nanofluid Minimum Quantity Lubrication
- (2021) Menghua Sui et al. Journal of Thermal Science and Engineering Applications
- Assessment of cumulative energy demand, production cost, and CO2 emission from hybrid CryoMQL assisted machining
- (2021) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Supercritical carbon dioxide and minimum quantity lubrication in pendular surface grinding – A feasibility study
- (2021) Robar Arafat et al. JOURNAL OF CLEANER PRODUCTION
- Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based Metal Working Fluids
- (2021) K.C. Wickramasinghe et al. JOURNAL OF CLEANER PRODUCTION
- A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process
- (2021) Munish Kumar Gupta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nanofluids: Physical phenomena, applications in thermal systems and the environment effects- a critical review
- (2021) Ahmad Hajatzadeh Pordanjani et al. Journal of Cleaner Production
- Evaluation of MQL broaching AISI 1045 steel with sesame oil containing nano-particles under best concentration
- (2021) Jing Ni et al. Journal of Cleaner Production
- Novel comparison concept between CBN and Al2O3 grinding process for eco-friendly production
- (2021) Bruno Kenta Sato et al. Journal of Cleaner Production
- Performance evaluation of tool coatings and nanofluid MQL on the micro-machinability of Ti-6Al-4V
- (2021) Ashutosh Roushan et al. Journal of Manufacturing Processes
- Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments
- (2020) Sarvesh Kumar Mishra et al. Journal of Manufacturing Processes
- Application of a tailored eco-friendly nanofluid in pressurized internal-cooling grinding of Inconel 718
- (2020) Ruitao Peng et al. JOURNAL OF CLEANER PRODUCTION
- Toward sustainable grinding using minimum quantity lubrication technique with diluted oil and simultaneous wheel cleaning
- (2020) B.K. Sato et al. TRIBOLOGY INTERNATIONAL
- Multi-objective optimization of MQL mist parameters for eco-friendly grinding
- (2020) Akash Subhash Awale et al. Journal of Manufacturing Processes
- Environmental Analysis of Sustainable and Traditional Cooling and Lubrication Strategies during Machining Processes
- (2020) Amr Salem et al. Sustainability
- Sustainable milling of Ti–6Al–4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment
- (2020) Muhammad Jamil et al. JOURNAL OF CLEANER PRODUCTION
- Application of eco-friendly lubricants in sustainable grinding of die steel
- (2020) Akash Subhash Awale et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental investigations on the tribological and lubrication behaviour of minimum quantity lubrication technique in grinding of Inconel 718 alloy
- (2020) Roshan Lal Virdi et al. TRIBOLOGY INTERNATIONAL
- Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800
- (2020) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic
- (2019) Yusuf S. Dambatta et al. Journal of Manufacturing Processes
- Capillary penetration mechanism and oil mist concentration of Al2O3 nanoparticle fluids in electrostatic minimum quantity lubrication (EMQL) milling
- (2019) Xuefeng Xu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of Al2O3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling
- (2019) Binayak Sen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Assessment and optimization of grinding process on AISI 1045 steel in terms of green manufacturing using orthogonal experimental design and grey relational analysis
- (2019) Zixuan Wang et al. JOURNAL OF CLEANER PRODUCTION
- Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension
- (2018) Shuming Guo et al. INDUSTRIAL CROPS AND PRODUCTS
- Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding
- (2018) Yuzhou Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An extensive review of the water consumption and cutting fluid based sustainability concerns in the metal cutting sector
- (2018) Salman Pervaiz et al. JOURNAL OF CLEANER PRODUCTION
- Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
- (2018) A. S. Awale et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
- (2017) Benkai Li et al. JOURNAL OF CLEANER PRODUCTION
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques
- (2017) Kishor Kumar Gajrani et al. JOURNAL OF CLEANER PRODUCTION
- Spreadability studies of metal working fluids on tool surface and its impact on minimum amount cooling and lubrication turning
- (2017) Bikash Chandra Behera et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on grinding of pre-sintered zirconia using diamond wheel
- (2017) P. Suya Prem Anand et al. MATERIALS AND MANUFACTURING PROCESSES
- Lubricating property of MQL grinding of Al 2 O 3 /SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation
- (2017) Xianpeng Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
- (2017) Dongzhou Jia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil
- (2016) Benkai Li et al. Chinese Journal of Aeronautics
- Study on the model of high efficiency and low carbon for grinding parameters optimization and its application
- (2016) Zhaohui Deng et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
- (2016) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
- (2016) Yaogang Wang et al. TRIBOLOGY INTERNATIONAL
- Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
- (2015) Dinesh Setti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Measurement of surface and interfacial tension using pendant drop tensiometry
- (2015) Joseph D. Berry et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Energy, economic and environmental analysis of metal oxides nanofluid for flat-plate solar collector
- (2013) M. Faizal et al. ENERGY CONVERSION AND MANAGEMENT
- Effects of pH on heat transfer nanofluids containing ZrO2 and TiO2 nanoparticles
- (2011) Carine Tchamakam Wamkam et al. JOURNAL OF APPLIED PHYSICS
- Grinding process parameter optimization using non-traditional optimization algorithms
- (2009) R V Rao et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More