Large-Scale Automated Additive Construction: Overview, Robotic Solutions, Sustainability, and Future Prospect

Recycling of aggregate micro fines as a partial replacement for fly ash in 3D printing cementitious materials

(2022) Huashan Yang et al.   CONSTRUCTION AND BUILDING MATERIALS

State of the Art Review of Reinforcement Strategies and Technologies for 3D Printing of Concrete

(2022) Zhengyu Wu et al.   Energies

Use of industrial waste materials for 3D printing of sustainable concrete: A review

(2022) Dhrutiman Dey et al.   Journal of Cleaner Production

Life cycle assessment of integrated additive–subtractive concrete 3D printing

(2021) Ivan Muñoz et al.   The International Journal of Advanced Manufacturing Technology

Resource-Constrained Scheduling for Multi-Robot Cooperative 3D Printing

(2021) Laxmi Poudel et al.   JOURNAL OF MECHANICAL DESIGN

Printability and particle packing of 3D-printable limestone calcined clay cement composites

(2021) Wu-Jian Long et al.   CONSTRUCTION AND BUILDING MATERIALS

Sustainable materials for 3D concrete printing

(2021) Shantanu Bhattacherjee et al.   CEMENT & CONCRETE COMPOSITES

Technologies for improving buildability in 3D concrete printing

(2021) Shravan Muthukrishnan et al.   CEMENT & CONCRETE COMPOSITES

3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates

(2021) Gang Bai et al.   CEMENT & CONCRETE COMPOSITES

Kinematics of a Cable-Driven Robotic Platform for Large-Scale Additive Manufacturing

(2021) Phillip C. Chesser et al.   Journal of Mechanisms and Robotics-Transactions of the ASME

Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding

(2021) Ya Ou et al.   3D Printing and Additive Manufacturing

Ground-based automated construction of droxel structures: An experimental approach

(2021) Alessandro Fascetti et al.   AUTOMATION IN CONSTRUCTION

Foam 3D printing for construction: A review of applications, materials, and processes

(2021) Patrick Bedarf et al.   AUTOMATION IN CONSTRUCTION

Performance of concrete beam reinforced with 3D printed Bioinspired primitive scaffold subjected to three-point bending

(2021) Vuong Nguyen-Van et al.   AUTOMATION IN CONSTRUCTION

3D concrete printing for sustainable and economical construction: A comparative study

(2021) Mustafa Batikha et al.   AUTOMATION IN CONSTRUCTION

Additive manufacturing of clay and ceramic building components

(2021) Alexander Wolf et al.   AUTOMATION IN CONSTRUCTION

Digital fabrication of eco-friendly ultra-high performance fiber-reinforced concrete

(2021) Arun R. Arunothayan et al.   CEMENT & CONCRETE COMPOSITES

3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure

(2021) Junli Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications

(2021) Andrei Jipa et al.   3D Printing and Additive Manufacturing

Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies

(2020) Li Wang et al.   CEMENT & CONCRETE COMPOSITES

Applications of additive manufacturing in fabrication of sensors - A review

(2020) Mohammad Reza Khosravani et al.   SENSORS AND ACTUATORS A-PHYSICAL

Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites

(2020) M. Kosson et al.   TRANSPORTATION RESEARCH RECORD

A critical review of 3D printing in construction: benefits, challenges, and risks

(2020) S. El-Sayegh et al.   Archives of Civil and Mechanical Engineering

3D printing of clay for decorative architectural applications: Effect of solids volume fraction on rheology and printability

(2020) Shareen S.L. Chan et al.   Additive Manufacturing

3-D printing of concrete: Beyond horizons

(2020) Mohammad S. Khan et al.   CEMENT AND CONCRETE RESEARCH

Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine

(2020) Zhixin Liu et al.   COMPOSITES PART B-ENGINEERING

Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink

(2020) Xiaoyan Sun et al.   CONSTRUCTION AND BUILDING MATERIALS

Study of MgO-activated slag as a cementless material for sustainable spray-based 3D printing

(2020) Bing Lu et al.   JOURNAL OF CLEANER PRODUCTION

Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach

(2020) Yiwei Weng et al.   JOURNAL OF CLEANER PRODUCTION

A Generative Approach for Scheduling Multi-Robot Cooperative Three-Dimensional Printing

(2020) Laxmi Poudel et al.   JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING

Koala 3D: A continuous climbing 3D printer

(2020) Maximiliano Vélez et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

Harmony Search Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements

(2020) Yusuf Cengiz Toklu et al.   Applied Sciences-Basel

Energy efficient 3D printed buildings: Material and techniques selection worldwide study

(2020) Ammar Alkhalidi et al.   Journal of Building Engineering

Additive manufacturing: Technology, applications, markets, and opportunities for the built environment

(2020) Ans Al Rashid et al.   AUTOMATION IN CONSTRUCTION

Hardened properties of layered 3D printed concrete with recycled sand

(2020) Tao Ding et al.   CEMENT & CONCRETE COMPOSITES

Energy-saving potential of 3D printed concrete building with integrated living wall

(2020) Yawen He et al.   ENERGY AND BUILDINGS

The past and future of sustainable concrete: A critical review and new strategies on cement-based materials

(2020) Jorge de Brito et al.   JOURNAL OF CLEANER PRODUCTION

Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete

(2020) Hashem Alhumayani et al.   JOURNAL OF CLEANER PRODUCTION

Use of municipal solid waste incineration ash in 3D printable concrete

(2020) Atta Ur Rehman et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

On the environmental impacts of 3D printing technology

(2020) Mohammad Reza Khosravani et al.   Applied Materials Today

Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing

(2020) Alexander Lin et al.   COMPOSITE STRUCTURES

3D Concrete Printing for Sustainable Construction

(2020) Maria Kaszyńska et al.   Energies

Environmental and economic assessment on 3D printed buildings with recycled concrete

(2020) Yilong Han et al.   JOURNAL OF CLEANER PRODUCTION

Collaborative and traditional robotic assembly: a comparison model

(2019) Maurizio Faccio et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

(2019) Guan Heng Andrew Ting et al.   Journal of Material Cycles and Waste Management

Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing

(2019) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Computer vision for real-time extrusion quality monitoring and control in robotic construction

(2019) Ali Kazemian et al.   AUTOMATION IN CONSTRUCTION

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

(2019) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

A systematical review of 3D printable cementitious materials

(2019) Bing Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing

(2019) Yu Chen et al.   Materials

Self‐Propelled 3D‐Printed “Aircraft Carrier” of Light‐Powered Smart Micromachines for Large‐Volume Nitroaromatic Explosives Removal

(2019) Lei Kong et al.   ADVANCED FUNCTIONAL MATERIALS

Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0

(2019) Flávio Craveiro et al.   AUTOMATION IN CONSTRUCTION

Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure

(2019) Stefan Chaves Figueiredo et al.   CONSTRUCTION AND BUILDING MATERIALS

Additive Manufacturing Processes for Infrastructure Construction: A Review

(2019) Abhinav Bhardwaj et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Design and Computational Modeling of a 3D Printed Pneumatic Toolkit for Soft Robotics

(2019) Cosima du Pasquier et al.   Soft Robotics

Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges

(2019) Fatemeh Hamidi et al.   CONSTRUCTION AND BUILDING MATERIALS

Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes

(2019) Oscar A. Mendoza Reales et al.   CONSTRUCTION AND BUILDING MATERIALS

Novel proposal to overcome insulation limitations due to nonlinear structures using 3D printing: Hybrid heat-storage system

(2019) Sungwoong Yang et al.   ENERGY AND BUILDINGS

Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study

(2019) Yue Yao et al.   JOURNAL OF INDUSTRIAL ECOLOGY

Effect of printing parameters in 3D concrete printing: Printing region and support structures

(2019) Yi Wei Daniel Tay et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

3D printing for construction based on a complex wall of polymer-foam and concrete

(2019) Benoit Furet et al.   Additive Manufacturing

Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing

(2019) Viktor Mechtcherine et al.   AUTOMATION IN CONSTRUCTION

Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing

(2019) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Robotic 3D clay printing of prefabricated non-conventional wall components based on a parametric-integrated design

(2019) Odysseas Kontovourkis et al.   AUTOMATION IN CONSTRUCTION

Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing

(2019) Wu-Jian Long et al.   JOURNAL OF CLEANER PRODUCTION

Research on large-scale additive manufacturing based on multi-robot collaboration technology

(2019) Hongyao Shen et al.   Additive Manufacturing

Additive manufacturing in construction: A review on processes, applications, and digital planning methods

(2019) Alexander Paolini et al.   Additive Manufacturing

Polymer-derived SiOC replica of material extrusion-based 3-D printed plastics

(2019) Apoorv Kulkarni et al.   Additive Manufacturing

Fresh and hardened properties of 3D printable cementitious materials for building and construction

(2018) Suvash Chandra Paul et al.   Archives of Civil and Mechanical Engineering

Perspectives on a BIM-integrated software platform for robotic construction through Contour Crafting

(2018) Omid Davtalab et al.   AUTOMATION IN CONSTRUCTION

Additive manufacturing technology and its implementation in construction as an eco-innovative solution

(2018) Seyed Hamidreza Ghaffar et al.   AUTOMATION IN CONSTRUCTION

Rethinking reinforcement for digital fabrication with concrete

(2018) Domenico Asprone et al.   CEMENT AND CONCRETE RESEARCH

Effects of an internal sulfate attack and an alkali-aggregate reaction in a concrete dam

(2018) A. Campos et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of surface moisture on inter-layer strength of 3D printed concrete

(2018) Jay G. Sanjayan et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermally insulating lightweight cement-based composites incorporating glass beads and nano-silica aerogels for sustainably energy-saving buildings

(2018) Qiang Zeng et al.   ENERGY AND BUILDINGS

Precursor Additive Manufacturing Inventions

(2018) C. Roberts et al.   JOM

Hybrid Processes in Additive Manufacturing

(2018) Michael P. Sealy et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

Automated material handling in composite manufacturing using pick-and-place systems – a review

(2018) Andreas Björnsson et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

A novel 6-axis hybrid additive-subtractive manufacturing process: Design and case studies

(2018) Lin Li et al.   Journal of Manufacturing Processes

Large-scale 3D printing by a team of mobile robots

(2018) Xu Zhang et al.   AUTOMATION IN CONSTRUCTION

Particle-bed 3D printing in concrete construction – Possibilities and challenges

(2018) Dirk Lowke et al.   CEMENT AND CONCRETE RESEARCH

Vision of 3D printing with concrete — Technical, economic and environmental potentials

(2018) Geert De Schutter et al.   CEMENT AND CONCRETE RESEARCH

The AEROARMS Project: Aerial Robots with Advanced Manipulation Capabilities for Inspection and Maintenance

(2018)   IEEE ROBOTICS & AUTOMATION MAGAZINE

Environmental assessment of multi-functional building elements constructed with digital fabrication techniques

(2018) Isolda Agustí-Juan et al.   INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT

Effect of Polypropylene Fibre Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction

(2018) Behzad Nematollahi et al.   Materials

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

(2018) Biranchi Panda et al.   MATERIALS LETTERS

A review of digital manufacturing-based hybrid additive manufacturing processes

(2017) Li Chong et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall

(2017) Isolda Agustí-Juan et al.   JOURNAL OF CLEANER PRODUCTION

Additive manufacturing of geopolymer for sustainable built environment

(2017) Biranchi Panda et al.   JOURNAL OF CLEANER PRODUCTION

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

(2017) Biranchi Panda et al.   MATERIALS LETTERS

Additive construction: State-of-the-art, challenges and opportunities

(2016) Nathalie Labonnote et al.   AUTOMATION IN CONSTRUCTION

Additive Manufacturing Integrated Energy—Enabling Innovative Solutions for Buildings of the Future

(2016) Kaushik Biswas et al.   JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME

Three-Dimensional Bioprinting and Its Potential in the Field of Articular Cartilage Regeneration

(2016) Vivian H. M. Mouser et al.   Cartilage

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

(2016) C. Gosselin et al.   MATERIALS & DESIGN

Dissolvable Metal Supports for 3D Direct Metal Printing

(2016) Owen J. Hildreth et al.   3D Printing and Additive Manufacturing

Multi-scale assembly with robot teams

(2015) Mehmet Dogar et al.   INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH

Cement and concrete as an engineering material: An historic appraisal and case study analysis

(2014) Colin R. Gagg   ENGINEERING FAILURE ANALYSIS

The Flight Assembled Architecture installation: Cooperative construction with flying machines

(2014)   IEEE CONTROL SYSTEMS MAGAZINE

Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

(2013) Giovanni Cesaretti et al.   ACTA ASTRONAUTICA

Optimal machine operation planning for construction by Contour Crafting

(2012) Jing Zhang et al.   AUTOMATION IN CONSTRUCTION

Offshore concrete structures

(2012) Rodrigo Pérez Fernández et al.   OCEAN ENGINEERING

Developments in construction-scale additive manufacturing processes

(2011) S. Lim et al.   AUTOMATION IN CONSTRUCTION

Design, data and process issues for mega-scale rapid manufacturing machines used for construction

(2008) R.A. Buswell et al.   AUTOMATION IN CONSTRUCTION