Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy

(2018) Ye Qian et al.   CEMENT & CONCRETE COMPOSITES

Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry

(2018) Delphine Marchon et al.   CEMENT AND CONCRETE RESEARCH

Rheological requirements for printable concretes

(2018) Nicolas Roussel   CEMENT AND CONCRETE RESEARCH

Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)

(2018) Ye Qian et al.   CEMENT AND CONCRETE RESEARCH

Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model

(2018) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of surface moisture on inter-layer strength of 3D printed concrete

(2018) Jay G. Sanjayan et al.   CONSTRUCTION AND BUILDING MATERIALS

Current challenges and future potential of 3D concrete printing

(2018) B. Panda et al.   MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

(2018) Biranchi Panda et al.   CEMENT & CONCRETE COMPOSITES

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

(2018) Biranchi Panda et al.   MATERIALS LETTERS

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

(2018) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Additive manufacturing of geopolymer for sustainable built environment

(2017) Biranchi Panda et al.   JOURNAL OF CLEANER PRODUCTION

Flow onset of fresh mortars in rheometers: Contribution of paste deflocculation and sand particle migration

(2016) Ye Qian et al.   CEMENT AND CONCRETE RESEARCH

Interfacial Tensile Bond between Substrate Concrete and Repairing Mortar under Freeze-Thaw Cycles

(2016) Ye Qian et al.   Journal of Advanced Concrete Technology

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

(2016) C. Gosselin et al.   MATERIALS & DESIGN

Use of waste glass as sand in mortar: Part II – Alkali–silica reaction and mitigation methods

(2012) Hongjian Du et al.   CEMENT & CONCRETE COMPOSITES

Use of waste glass as sand in mortar: Part I – Fresh, mechanical and durability properties

(2012) Kiang Hwee Tan et al.   CEMENT & CONCRETE COMPOSITES

Recycled glass as a partial replacement for fine aggregate in self compacting concrete

(2012) Esraa Emam Ali et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of recycled fine glass aggregates on the properties of dry–mixed concrete blocks

(2012) Gerry Lee et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of the durability of concrete made with crushed glass aggregates

(2012) Sara de Castro et al.   JOURNAL OF CLEANER PRODUCTION

Mix design and fresh properties for high-performance printing concrete

(2012) T. T. Le et al.   MATERIALS AND STRUCTURES

Feasibility of using recycled glass in architectural cement mortars

(2011) Tung-Chai Ling et al.   CEMENT & CONCRETE COMPOSITES

Use of fine glass as ASR inhibitor in glass aggregate mortars

(2010) Rachida Idir et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials

(2008) Fabien Mahaut et al.   CEMENT AND CONCRETE RESEARCH

Bulk engineering and durability properties of washed glass sand concrete

(2008) Mukesh C. Limbachiya   CONSTRUCTION AND BUILDING MATERIALS

Recycling of waste glass as a partial replacement for fine aggregate in concrete

(2008) Zainab Z. Ismail et al.   WASTE MANAGEMENT

Properties of concrete contains mixed colour waste recycled glass as sand and cement replacement

(2007) Bashar Taha et al.   CONSTRUCTION AND BUILDING MATERIALS