- Home
- Publications
- Publication Search
- Publication Details
Title
Technologies for improving buildability in 3D concrete printing
Authors
Keywords
Buildability, Concrete 3D printing, Set-on-demand, Active rheology control, Active stiffening control, Geopolymer
Journal
CEMENT & CONCRETE COMPOSITES
Volume 122, Issue -, Pages 104144
Publisher
Elsevier BV
Online
2021-06-23
DOI
10.1016/j.cemconcomp.2021.104144
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Stiffening control of cement-based materials using accelerators in inline mixing processes: Possibilities and challenges
- (2021) Yaxin Tao et al. CEMENT & CONCRETE COMPOSITES
- Evaluating the printability of concretes containing lightweight coarse aggregates
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing
- (2020) Inka Dressler et al. Materials
- Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing
- (2020) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Yield stress criteria to assess the buildability of 3D concrete printing
- (2020) R. Jayathilakage et al. CONSTRUCTION AND BUILDING MATERIALS
- Setting on demand for digital concrete – Principles, measurements, chemistry, validation
- (2020) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
- (2020) V. Mechtcherine et al. CEMENT AND CONCRETE RESEARCH
- Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing
- (2020) Shravan Muthukrishnan et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Transparent model concrete with tunable rheology for investigating flow and particle-migration during transport in pipes
- (2020) Günter K. Auernhammer et al. MATERIALS & DESIGN
- Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
- (2020) Arun R. Arunothayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
- (2020) Shravan Muthukrishnan et al. CONSTRUCTION AND BUILDING MATERIALS
- Vibration induced active rheology control for 3D concrete printing
- (2020) J.G. Sanjayan et al. CEMENT AND CONCRETE RESEARCH
- Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications
- (2019) Roshan Jayathilakage et al. MATERIALS AND STRUCTURES
- Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
- (2019) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
- (2019) Yu Chen et al. Materials
- A Study into the Effect of Different Nozzles Shapes and Fibre-Reinforcement in 3D Printed Mortar
- (2019) Pshtiwan Shakor et al. Materials
- Structural failure during extrusion-based 3D printing processes
- (2019) R. J. M. Wolfs et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study
- (2019) Yue Yao et al. JOURNAL OF INDUSTRIAL ECOLOGY
- Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar
- (2019) Shravan Muthukrishnan et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars
- (2019) Ines Dejaeghere et al. CONSTRUCTION AND BUILDING MATERIALS
- Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
- (2019) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
- (2019) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
- (2019) Wu-Jian Long et al. JOURNAL OF CLEANER PRODUCTION
- Properties of one-part geopolymer incorporating wollastonite as partial replacement of geopolymer precursor or sand
- (2019) Shin Hau Bong et al. MATERIALS LETTERS
- Clean production and properties of geopolymer concrete; A review
- (2019) Y.H. Mugahed Amran et al. JOURNAL OF CLEANER PRODUCTION
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- The role of early age structural build-up in digital fabrication with concrete
- (2018) Lex Reiter et al. CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion
- (2018) Dale P. Bentz et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology
- (2018) Vitoldas Vaitkevičius et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
- (2018) Sarah Al-Qutaifi et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
- (2018) A.S.J. Suiker INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
- (2018) Zhijian Li et al. International Journal of Concrete Structures and Materials
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- Active control of properties of concrete: a (p)review
- (2018) Geert De Schutter et al. MATERIALS AND STRUCTURES
- 4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
- (2018) Pengfei Zhu et al. ACS Applied Materials & Interfaces
- Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
- (2018) Biranchi Panda et al. MATERIALS LETTERS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate
- (2018) Jianhe Xie et al. COMPOSITES PART B-ENGINEERING
- A review of 4D printing
- (2017) Farhang Momeni et al. MATERIALS & DESIGN
- Stimuli-Responsive Reversible Two-Level Adhesion from a Structurally Dynamic Shape-Memory Polymer
- (2016) Brian T. Michal et al. ACS Applied Materials & Interfaces
- Utilization of rice husk ash in green natural fiber-reinforced cement composites: Mitigating degradation of sisal fiber
- (2016) Jianqiang Wei et al. CEMENT AND CONCRETE RESEARCH
- A review of recent developments in natural fibre composites and their mechanical performance
- (2016) K.L. Pickering et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete
- (2016) B. Singh et al. CONSTRUCTION AND BUILDING MATERIALS
- Direct electric curing of alkali-activated fly ash concretes: a tool for wider utilization of fly ashes
- (2016) Maxim Kovtun et al. JOURNAL OF CLEANER PRODUCTION
- Self-propelled supramolecular nanomotors with temperature-responsive speed regulation
- (2016) Yingfeng Tu et al. Nature Chemistry
- Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders
- (2016) C. Gosselin et al. MATERIALS & DESIGN
- Microwave processing of cement and concrete materials – towards an industrial reality?
- (2015) Adam Buttress et al. CEMENT AND CONCRETE RESEARCH
- Characteristics of nanoclay and calcined nanoclay-cement nanocomposites
- (2015) A. Hakamy et al. COMPOSITES PART B-ENGINEERING
- Complex concrete structures
- (2015) Ena Lloret et al. COMPUTER-AIDED DESIGN
- Dynamic retarder exchange as a trigger for Portland cement hydration
- (2014) Xueyu Pang et al. CEMENT AND CONCRETE RESEARCH
- Set-on-demand concrete
- (2014) Sriramya Duddukuri Nair et al. CEMENT AND CONCRETE RESEARCH
- Active origami by 4D printing
- (2014) Qi Ge et al. Smart Materials and Structures
- Effect of steam curing cycles on strength and durability of SCC: A case study in precast concrete
- (2013) A.A. Ramezanianpour et al. CONSTRUCTION AND BUILDING MATERIALS
- Hydration evolution of pre-cast concrete with steam and water curing
- (2013) Ming-fang Ba et al. Journal of Central South University
- Interactions between alite and C3A-gypsum hydrations in model cements
- (2012) Alexandra Quennoz et al. CEMENT AND CONCRETE RESEARCH
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Accelerated growth of calcium silicate hydrates: Experiments and simulations
- (2011) Luc Nicoleau CEMENT AND CONCRETE RESEARCH
- Dissolution theory applied to the induction period in alite hydration
- (2010) Patrick Juilland et al. CEMENT AND CONCRETE RESEARCH
- Mechanisms of cement hydration
- (2010) Jeffrey W. Bullard et al. CEMENT AND CONCRETE RESEARCH
- Microwave-assisted heating of cementitious materials: Relative dielectric properties, mechanical property, and experimental and numerical heat transfer characteristics
- (2010) Natt Makul et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- The influence of sucrose on the crystallization behaviour in the system CaO–SiO2–C12H22O11–H2O under hydrothermal conditions
- (2010) A. Hartmann et al. MATERIALS RESEARCH BULLETIN
- Emerging applications of stimuli-responsive polymer materials
- (2010) Martien A. Cohen Stuart et al. NATURE MATERIALS
- Yield stress during setting of cement pastes from penetration tests
- (2009) D. Lootens et al. CEMENT AND CONCRETE RESEARCH
- Future perspectives and recent advances in stimuli-responsive materials
- (2009) Debashish Roy et al. PROGRESS IN POLYMER SCIENCE
- Drying and autogenous shrinkage of pastes and mortars with activated slag cement
- (2008) Antonio A. Melo Neto et al. CEMENT AND CONCRETE RESEARCH
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started