Use of industrial waste materials for 3D printing of sustainable concrete: A review

Flow-Based Pultrusion of continuous fibers for cement-based composite material and additive manufacturing: rheological and technological requirements

(2021) Léo Demont et al.   COMPOSITE STRUCTURES

Digital design computing and modelling for 3-D concrete printing

(2021) Vuong Nguyen-Van et al.   AUTOMATION IN CONSTRUCTION

Synchronized concrete and bonding agent deposition system for interlayer bond strength enhancement in 3D concrete printing

(2021) Yiwei Weng et al.   AUTOMATION IN CONSTRUCTION

Hardened properties and durability of large-scale 3D printed cement-based materials

(2021) Yu Zhang et al.   MATERIALS AND STRUCTURES

Effect of printing parameters on material distribution in spray-based 3D concrete printing (S-3DCP)

(2021) Bing Lu et al.   AUTOMATION IN CONSTRUCTION

Fiber orientation effects on ultra-high performance concrete formed by 3D printing

(2021) Arun R. Arunothayan et al.   CEMENT AND CONCRETE RESEARCH

Influence of the printing direction and age on the mechanical properties of 3D printed concrete

(2021) Behzad Zahabizadeh et al.   MATERIALS AND STRUCTURES

3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates

(2021) Gang Bai et al.   CEMENT & CONCRETE COMPOSITES

Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing

(2021) Oğuzhan Şahin et al.   CEMENT & CONCRETE COMPOSITES

Rheology and application of buoyant foam concrete for digital fabrication

(2021) Seung Cho et al.   COMPOSITES PART B-ENGINEERING

Stability of steel slag as fine aggregate and its application in 3D printing materials

(2021) Shuo Dai et al.   CONSTRUCTION AND BUILDING MATERIALS

Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments

(2021) Bilal Baz et al.   CONSTRUCTION AND BUILDING MATERIALS

Flexural properties of 3D printed fibre-reinforced concrete with recycled sand

(2021) Tao Ding et al.   CONSTRUCTION AND BUILDING MATERIALS

Sustainability tradeoffs in the adoption of 3D Concrete Printing in the construction industry

(2021) Max Adaloudis et al.   Journal of Cleaner Production

Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing

(2021) Guan Heng Andrew Ting et al.   Journal of Cleaner Production

3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics

(2021) Atta Ur Rehman et al.   Materials

Mechanical enhancement for EMW-absorbing cementitious material using 3D concrete printing

(2021) Junbo Sun et al.   Journal of Building Engineering

Biomass ashes from agricultural wastes as supplementary cementitious materials or aggregate replacement in cement/geopolymer concrete: A comprehensive review

(2021) Blessen Skariah Thomas et al.   Journal of Building Engineering

Influence of Waste Tire Rubber Particles Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D-Printable Cement Mortars

(2021) Matteo Sambucci et al.   Civil Engineering Journal-Tehran

Effects of unconventional fly ashes on cementitious paste properties

(2021) Ying Wang et al.   CEMENT & CONCRETE COMPOSITES

Digital fabrication of eco-friendly ultra-high performance fiber-reinforced concrete

(2021) Arun R. Arunothayan et al.   CEMENT & CONCRETE COMPOSITES

Experimental characterization of quaternary blended mortar exposed to marine environment using mechanical strength, corrosion resistance and chemical composition

(2021) Dodda Srinivas et al.   Journal of Building Engineering

A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials

(2020) A.V. Rahul et al.   CEMENT & CONCRETE COMPOSITES

Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing

(2020) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers

(2020) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Yield stress criteria to assess the buildability of 3D concrete printing

(2020) R. Jayathilakage et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical Behavior of Printed Strain Hardening Cementitious Composites

(2020) Stefan Chaves Figueiredo et al.   Materials

Alternative supplementary cementitious materials for sustainable concrete structures: a review on characterization and properties

(2020) J. Duchesne   Waste and Biomass Valorization

Setting on demand for digital concrete – Principles, measurements, chemistry, validation

(2020) Lex Reiter et al.   CEMENT AND CONCRETE RESEARCH

Mechanical behavior of 3D printed mortar with recycled sand at early ages

(2020) Tao Ding et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings

(2020) Xinjian Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink

(2020) Xiaoyan Sun et al.   CONSTRUCTION AND BUILDING MATERIALS

Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance

(2020) Luong Pham et al.   CONSTRUCTION AND BUILDING MATERIALS

Study of MgO-activated slag as a cementless material for sustainable spray-based 3D printing

(2020) Bing Lu et al.   JOURNAL OF CLEANER PRODUCTION

Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach

(2020) Yiwei Weng et al.   JOURNAL OF CLEANER PRODUCTION

Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing

(2020) Shravan Muthukrishnan et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Inspecting manufacturing precision of 3D printed concrete parts based on geometric dimensioning and tolerancing

(2020) Jie Xu et al.   AUTOMATION IN CONSTRUCTION

A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders

(2020) Sooraj A.O. Nair et al.   CEMENT & CONCRETE COMPOSITES

Comparison of the effects that supplementary cementitious materials replacement levels have on cementitious paste properties

(2020) Sivakumar Ramanathan et al.   CEMENT & CONCRETE COMPOSITES

Hardened properties of layered 3D printed concrete with recycled sand

(2020) Tao Ding et al.   CEMENT & CONCRETE COMPOSITES

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

(2020) Arun R. Arunothayan et al.   CONSTRUCTION AND BUILDING MATERIALS

A rheology-based quasi-static shape retention model for digitally fabricated concrete

(2020) Jacques Kruger et al.   CONSTRUCTION AND BUILDING MATERIALS

Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete

(2020) Hashem Alhumayani et al.   JOURNAL OF CLEANER PRODUCTION

Bond properties of reinforcing bar penetrations in 3D concrete printing

(2020) Taylor Marchment et al.   AUTOMATION IN CONSTRUCTION

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

(2020) Manu K. Mohan et al.   CEMENT AND CONCRETE RESEARCH

Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization

(2020) Zifan Geng et al.   CEMENT AND CONCRETE RESEARCH

Printability and advantages of 3D printing mortar with 100% recycled sand

(2020) Shuai Zou et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing

(2020) Shravan Muthukrishnan et al.   CONSTRUCTION AND BUILDING MATERIALS

Environmental and economic assessment on 3D printed buildings with recycled concrete

(2020) Yilong Han et al.   JOURNAL OF CLEANER PRODUCTION

A 3D concrete printing prefabrication platform for bespoke columns

(2020) Ana Anton et al.   AUTOMATION IN CONSTRUCTION

Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete

(2020) Shravan Muthukrishnan et al.   CEMENT & CONCRETE COMPOSITES

Vibration induced active rheology control for 3D concrete printing

(2020) J.G. Sanjayan et al.   CEMENT AND CONCRETE RESEARCH

Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications

(2019) Roshan Jayathilakage et al.   MATERIALS AND STRUCTURES

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

(2019) Guan Heng Andrew Ting et al.   Journal of Material Cycles and Waste Management

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

(2019) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Experimental methods to determine the feasibility of steel slags as supplementary cementitious materials

(2019) Ying Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative sustainability assessment of binary blended concretes using Supplementary Cementitious Materials (SCMs) and Ordinary Portland Cement (OPC)

(2019) Kamel Mohamed Rahla et al.   JOURNAL OF CLEANER PRODUCTION

Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing

(2019) Biranchi Panda et al.   JOURNAL OF CLEANER PRODUCTION

Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent

(2019) Bing Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

(2019) Biranchi Panda et al.   Materials

3D concrete printing: A lower bound analytical model for buildability performance quantification

(2019) Jacques Kruger et al.   AUTOMATION IN CONSTRUCTION

New insights from reactivity testing of supplementary cementitious materials

(2019) Prannoy Suraneni et al.   CEMENT & CONCRETE COMPOSITES

Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing

(2019) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing

(2019) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete

(2019) Jacques Kruger et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructural Characterization of 3D Printed Cementitious Materials

(2019) Jolien Van Der Putten et al.   Materials

3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse

(2019) Jacques Kruger et al.   COMPOSITES PART B-ENGINEERING

Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing

(2019) Wu-Jian Long et al.   JOURNAL OF CLEANER PRODUCTION

Fresh and hardened properties of 3D printable cementitious materials for building and construction

(2018) Suvash Chandra Paul et al.   Archives of Civil and Mechanical Engineering

A self-reinforced cementitious composite for building-scale 3D printing

(2018) Daniel G. Soltan et al.   CEMENT & CONCRETE COMPOSITES

The role of early age structural build-up in digital fabrication with concrete

(2018) Lex Reiter et al.   CEMENT AND CONCRETE RESEARCH

Eco-efficient cements: Potential economically viable solutions for a low-CO 2 cement-based materials industry

(2018) Karen L. Scrivener et al.   CEMENT AND CONCRETE RESEARCH

Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing

(2018) Biranchi Panda et al.   CERAMICS INTERNATIONAL

Fresh properties of a novel 3D printing concrete ink

(2018) Yu Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement

(2018) Jian Hui Lim et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of mineral admixtures on the structural build-up of cement paste

(2018) Qiang Yuan et al.   CONSTRUCTION AND BUILDING MATERIALS

Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

(2018) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour

(2018) Viktor Mechtcherine et al.   CONSTRUCTION AND BUILDING MATERIALS

Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model

(2018) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar

(2018) Zhijian Li et al.   International Journal of Concrete Structures and Materials

Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids

(2018) Guowei Ma et al.   CEMENT & CONCRETE COMPOSITES

Inline quantification of extrudability of cementitious materials for digital construction

(2018) V.N. Nerella et al.   CEMENT & CONCRETE COMPOSITES

Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing

(2018) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Field trials with concrete incorporating biomass-fly ash

(2018) Ahmed Omran et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

(2018) Biranchi Panda et al.   CEMENT & CONCRETE COMPOSITES

Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction

(2018) V.N. Nerella et al.   CEMENT AND CONCRETE RESEARCH

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

(2018) Biranchi Panda et al.   MATERIALS LETTERS

Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing

(2018) Zhixin Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

3D printable concrete: Mixture design and test methods

(2018) A.V. Rahul et al.   CEMENT & CONCRETE COMPOSITES

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

(2018) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Environmental design guidelines for digital fabrication

(2017) Isolda Agustí-Juan et al.   JOURNAL OF CLEANER PRODUCTION

Additive manufacturing of geopolymer for sustainable built environment

(2017) Biranchi Panda et al.   JOURNAL OF CLEANER PRODUCTION

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

(2017) Biranchi Panda et al.   MATERIALS LETTERS

Towards sustainable concrete

(2017) Paulo J. M. Monteiro et al.   NATURE MATERIALS

Properties of cement grout modified with ultra-fine slag

(2017) Sowmini Gopinathan et al.   Frontiers of Structural and Civil Engineering

Extending supplementary cementitious material resources: Reclaimed and remediated fly ash and natural pozzolans

(2017) Ivan Diaz-Loya et al.   CEMENT & CONCRETE COMPOSITES

Experimental study on flexural behaviour of inorganic polymer concrete beams reinforced with basalt rebar

(2016) Xiaochun Fan et al.   COMPOSITES PART B-ENGINEERING

Readily implementable techniques can cut annual CO2emissions from the production of concrete by over 20%

(2016) Sabbie A Miller et al.   Environmental Research Letters

Characterization of supplementary cementitious materials by thermal analysis

(2016) Susan A. Bernal et al.   MATERIALS AND STRUCTURES

Recent advances in understanding the role of supplementary cementitious materials in concrete

(2015) Maria C.G. Juenger et al.   CEMENT AND CONCRETE RESEARCH

Understanding the Filler Effect on the Nucleation and Growth of C-S-H

(2014) E. Berodier et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

The Filler Effect: The Influence of Filler Content and Surface Area on Cementitious Reaction Rates

(2013) Tandré Oey et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Hardened properties of high-performance printing concrete

(2012) T.T. Le et al.   CEMENT AND CONCRETE RESEARCH

Mix design and fresh properties for high-performance printing concrete

(2012) T. T. Le et al.   MATERIALS AND STRUCTURES

Supplementary cementitious materials

(2011) Barbara Lothenbach et al.   CEMENT AND CONCRETE RESEARCH

The influence of small particle on the fluidity of blast furnace slag cement paste containing superplasticizers

(2011) Stefania Grzeszczyk et al.   CONSTRUCTION AND BUILDING MATERIALS

Comprehensive phase characterization of crystalline and amorphous phases of a Class F fly ash

(2009) Ryan T. Chancey et al.   CEMENT AND CONCRETE RESEARCH

Chloride Chemical Form in Various Types of Fly Ash

(2008) Fenfen Zhu et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY