3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure

Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography

(2021) Yu Chen et al.   MATERIALS CHARACTERIZATION

Numerical Study of Fire and Energy Performance of Innovative Light-Weight 3D Printed Concrete Wall Configurations in Modular Building System

(2021) Thadshajini Suntharalingam et al.   Sustainability

The effects of nanosilica on the fresh and hardened properties of 3D printable mortars

(2021) Pawel Sikora et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigations on fracture in reinforced concrete beams in 3-point bending using continuous micro-CT scanning

(2021) Łukasz Skarżyński et al.   CONSTRUCTION AND BUILDING MATERIALS

3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties

(2021) Karla Cuevas et al.   Journal of Building Engineering

Flexural properties of 3D printed fibre-reinforced concrete with recycled sand

(2021) Tao Ding et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing

(2021) Guan Heng Andrew Ting et al.   Journal of Cleaner Production

Recycling biosolids as cement composites in raw, pyrolyzed and ashed forms: A waste utilisation approach to support circular economy

(2021) Rajeev Roychand et al.   Journal of Building Engineering

Practical Rubber Pre-Treatment Approch for Concrete Use—An Experimental Study

(2021) Rajeev Roychand et al.   Journal of Composites Science

Plastic shrinkage and cracking of 3D printed mortar with recycled sand

(2021) Hanghua Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Fiber-reinforced mortar with 100% recycled fine aggregates: A cleaner perspective on 3D printing

(2021) Jianzhuang Xiao et al.   Journal of Cleaner Production

Additive Manufacturing of Sustainable Construction Materials and Form-finding Structures: A Review on Recent Progresses

(2021) Junli Liu et al.   3D Printing and Additive Manufacturing

Microstructural characterization of 3D printed concrete

(2021) Shiwei Yu et al.   Journal of Building Engineering

Fire performance of innovative 3D printed concrete composite wall panels – A Numerical Study

(2021) Thadshajini Suntharalingam et al.   Case Studies in Construction Materials

3D printing of a post-tensioned concrete girder designed by topology optimization

(2020) Gieljan Vantyghem et al.   AUTOMATION IN CONSTRUCTION

Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing

(2020) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

An experimental study of the behavior of 3D printed concrete at elevated temperatures

(2020) Antonio Cicione et al.   FIRE SAFETY JOURNAL

Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture

(2020) Yu Chen et al.   CEMENT AND CONCRETE RESEARCH

Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance

(2020) Luong Pham et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach

(2020) Yiwei Weng et al.   JOURNAL OF CLEANER PRODUCTION

Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing

(2020) Shravan Muthukrishnan et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Nano-scale structure and mechanical properties of ASR products under saturated and dry conditions

(2020) Huite Wu et al.   Scientific Reports

A Review of 3D Printing in Construction and its Impact on the Labor Market

(2020) Md. Aslam Hossain et al.   Sustainability

A compendious review on lack-of-fusion in digital concrete fabrication

(2020) Jacques Kruger et al.   Additive Manufacturing

Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization

(2020) Zifan Geng et al.   CEMENT AND CONCRETE RESEARCH

Sustainable and Renewable Bio-Based Natural Fibres and Its Application for 3D Printed Concrete: A Review

(2020) Salmabanu Luhar et al.   Sustainability

An investigation into the porosity of extrusion-based 3D printed concrete

(2020) Jacques Kruger et al.   Additive Manufacturing

Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applications

(2020) Biranchi Panda et al.   CEMENT & CONCRETE COMPOSITES

Method of Optimisation for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications

(2019) Shin Bong et al.   Materials

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

(2019) Guan Heng Andrew Ting et al.   Journal of Material Cycles and Waste Management

Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing

(2019) Venkatesh Naidu Nerella et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructural Characterization of 3D Printed Cementitious Materials

(2019) Jolien Van Der Putten et al.   Materials

Applications of additive manufacturing in the construction industry – A forward-looking review

(2018) Daniel Delgado Camacho et al.   AUTOMATION IN CONSTRUCTION

Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing

(2018) Biranchi Panda et al.   CERAMICS INTERNATIONAL

Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model

(2018) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of surface moisture on inter-layer strength of 3D printed concrete

(2018) Jay G. Sanjayan et al.   CONSTRUCTION AND BUILDING MATERIALS

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications

(2018) Anton du Plessis et al.   3D Printing and Additive Manufacturing

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

(2018) Biranchi Panda et al.   MATERIALS LETTERS

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

(2018) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Additive manufacturing of geopolymer for sustainable built environment

(2017) Biranchi Panda et al.   JOURNAL OF CLEANER PRODUCTION

Pozzolanic reaction of glass powder and its role in controlling alkali–silica reaction

(2016) Keren Zheng   CEMENT & CONCRETE COMPOSITES

Use of waste glass as sand in mortar: Part II – Alkali–silica reaction and mitigation methods

(2012) Hongjian Du et al.   CEMENT & CONCRETE COMPOSITES

Evaluation of the durability of concrete made with crushed glass aggregates

(2012) Sara de Castro et al.   JOURNAL OF CLEANER PRODUCTION

Use of fine glass as ASR inhibitor in glass aggregate mortars

(2010) Rachida Idir et al.   CONSTRUCTION AND BUILDING MATERIALS