- Home
- Publications
- Publication Search
- Publication Details
Title
4D printing: Technological developments in robotics applications
Authors
Keywords
-
Journal
SENSORS AND ACTUATORS A-PHYSICAL
Volume 343, Issue -, Pages 113670
Publisher
Elsevier BV
Online
2022-06-10
DOI
10.1016/j.sna.2022.113670
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Magnetic Soft Materials and Robots
- (2022) Yoonho Kim et al. CHEMICAL REVIEWS
- Comprehensive study on shape shifting behaviors in FDM-based 4D printing of bilayer structures
- (2022) Iman Salimi Nezhad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A voyage from 3D to 4D printing in nanomedicine and healthcare: part II
- (2022) Gourvi Kumari et al. Nanomedicine
- 3D-printed bio-inspired zero Poisson’s ratio graded metamaterials with high energy absorption performance
- (2022) Ramin Hamzehei et al. Smart Materials and Structures
- pH-Induced 3D Printable Chitosan Hydrogels for Soft Actuation
- (2022) Sheila Maiz-Fernández et al. Polymers
- Programmed Shape-Morphing Material Using Single-Layer 4D Printing System
- (2022) Seonjin Lee et al. Micromachines
- Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions
- (2022) Utkarsh Chadha et al. Progress in Additive Manufacturing
- Direct Ink Writing of 4D Structural Colors
- (2022) Jeroen A. H. P. Sol et al. ADVANCED FUNCTIONAL MATERIALS
- A new trend of using poly(vinyl alcohol) in 3D and 4D printing technologies: Process and applications
- (2022) Shadpour Mallakpour et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- 4D-printed pH sensing claw
- (2022) Chun-Yi Wu et al. ANALYTICA CHIMICA ACTA
- 4D printing of electroactive shape-changing composite structures and their programmable behaviors
- (2022) Xinyu Dong et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Recent advances in 3D printing of tough hydrogels: A review
- (2022) Xin Ning Zhang et al. COMPOSITES PART B-ENGINEERING
- Dual-mode biomimetic soft actuator with electrothermal and magneto-responsive performance
- (2022) Wenwen Li et al. COMPOSITES PART B-ENGINEERING
- DIW 3D printing of hybrid magnetorheological materials for application in soft robotic grippers
- (2022) Ruihua Guan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 4D printing: Pragmatic progression in biofabrication
- (2022) Janhavi Sonatkar et al. EUROPEAN POLYMER JOURNAL
- Toward enabling manufacturing paradigm of 4D printing of shape memory materials: Open literature review
- (2022) Ijaz Akbar et al. EUROPEAN POLYMER JOURNAL
- Interpenetrating polymer network hydrogels using natural based dyes initiating systems: Antibacterial activity and 3D/4D performance
- (2022) Hong Chen et al. EUROPEAN POLYMER JOURNAL
- On 3D-Printed Acrylonitrile Butadiene Styrene-Based Sensors: Rheological, Mechanical, Morphological, Radio Frequency, and 4D Capabilities
- (2022) Chahat Jain et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Hybrid IGA-FEA of fiber reinforced thermoplastic composites for forward design of AI-enabled 4D printing
- (2022) Yuxuan Yu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 4D printing technology in medical engineering: a narrative review
- (2022) Iman Sahafnejad-Mohammadi et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- 4D Printing: Technological and Manufacturing Renaissance
- (2022) Muhammad Yasir Khalid et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- A viscoelastic constitutive model for shape memory polymer composites: Micromechanical modeling, numerical implementation and application in 4D printing
- (2022) Chengjun Zeng et al. MECHANICS OF MATERIALS
- 4D printing of polymers: Techniques, materials, and prospects
- (2022) Peng Fu et al. PROGRESS IN POLYMER SCIENCE
- Research and application of a multi-degree-of-freedom soft actuator
- (2022) Yinlong Zhu et al. SENSORS AND ACTUATORS A-PHYSICAL
- Reversible energy absorption of elasto-plastic auxetic, hexagonal, and AuxHex structures fabricated by FDM 4D printing
- (2022) N Namvar et al. Smart Materials and Structures
- Effects of soft and hard magnetic particles on the mechanical performance of ultra-soft magnetorheological elastomers
- (2022) M A Moreno-Mateos et al. Smart Materials and Structures
- 4D printed shape memory sandwich structures: experimental analysis and numerical modeling
- (2022) A Serjouei et al. Smart Materials and Structures
- Customized protective visors enabled by closed loop controlled 4D printing
- (2022) Qinglei Ji et al. Scientific Reports
- Towards 4D Printing of Very Soft Heterogeneous Magnetoactive Layers for Morphing Surface Applications via Liquid Additive Manufacturing
- (2022) Lucas Brusa da Costa Linn et al. Polymers
- Light‐Actuated Anisotropic Microactuators from CNT/Hydrogel Nanocomposites
- (2022) Aoife Gregg et al. Advanced Optical Materials
- Acoustic Metamaterials and Acoustic Foams: Recent Advances
- (2022) Reza Hedayati et al. Applied Sciences-Basel
- Laser-aided additive manufacturing of high entropy alloys: Processes, properties, and emerging applications
- (2022) Zia Ullah Arif et al. Journal of Manufacturing Processes
- A comprehensive experimental investigation on 4D printing of PET-G under bending
- (2022) Mohammad Aberoumand et al. Journal of Materials Research and Technology-JMR&T
- Selective Laser Sintering 4D Printing of Dynamic Cross-linked Polyurethane Containing Diels–Alder Bonds
- (2022) Hao Ouyang et al. ACS Applied Polymer Materials
- Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds: Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches
- (2022) Reza Noroozi et al. International Journal of Bioprinting
- Significance of 4D printing for dentistry: Materials, process, and potentials
- (2022) Mohd Javaid et al. Journal of Oral Biology and Craniofacial Research
- Polymer/metal composite 3D porous bone tissue engineering scaffolds fabricated by additive manufacturing techniques: A review
- (2022) Meysam Mohammadi Zerankeshi et al. Bioprinting
- Procedure to determine deformed shape of laminates made by unsymmetric layup sequences – Basis for 4D printing of composites
- (2022) Suong V. Hoa et al. COMPOSITE STRUCTURES
- 4D printed TPU/PLA/CNT wave structural composite with intelligent thermal-induced shape memory effect and synergistically enhanced mechanical properties
- (2022) Xiayan Huang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- SMA-based soft actuators with electrically responsive and photoresponsive deformations applied in soft robots
- (2022) Dong Niu et al. SENSORS AND ACTUATORS A-PHYSICAL
- A review on four-dimensional (4D) bioprinting in pursuit of advanced tissue engineering applications
- (2022) Zia Ullah Arif et al. Bioprinting
- Novel biopolymer-based sustainable composites for food packaging applications: A narrative review
- (2022) Muhammad Yasir Khalid et al. Food Packaging and Shelf Life
- 4D Printing of Magnetoactive Soft Materials for On-Demand Magnetic Actuation Transformation
- (2021) Yuanxi Zhang et al. ACS Applied Materials & Interfaces
- Additive manufacturing and the COVID-19 challenges: An in-depth study
- (2021) Md. Sarower Tareq et al. JOURNAL OF MANUFACTURING SYSTEMS
- 4D Printing of Shape Memory Materials for Textiles: Mechanism, Mathematical Modeling, and Challenges
- (2021) Manik Chandra Biswas et al. ADVANCED FUNCTIONAL MATERIALS
- Advances in additive manufacturing of shape memory polymer composites
- (2021) Irina Tatiana Garces et al. RAPID PROTOTYPING JOURNAL
- Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study
- (2021) Naeim Ghavidelnia et al. Materials
- Improving the Accuracy of Analytical Relationships for Mechanical Properties of Permeable Metamaterials
- (2021) Reza Hedayati et al. Applied Sciences-Basel
- Quantifying the Shape Memory Performance of a Three-Dimensional-Printed Biobased Polyester/Cellulose Composite Material
- (2021) Maxime Barbier et al. 3D Printing and Additive Manufacturing
- Nonlinear Finite Element Modelling of Thermo-Visco-Plastic Styrene and Polyurethane Shape Memory Polymer Foams
- (2021) Hamid Reza Jarrah et al. Actuators
- 4D Textiles Made by Additive Manufacturing on Pre-Stressed Textiles—An Overview
- (2021) Hannah Carlotta Koch et al. Actuators
- Fractal-Based Stretchable Circuits via Electric-Field-Driven Microscale 3D Printing for Localized Heating of Shape Memory Polymers in 4D Printing
- (2021) Yuan-Fang Zhang et al. ACS Applied Materials & Interfaces
- 4D Printing of Multi‐Stimuli Responsive Protein‐Based Hydrogels for Autonomous Shape Transformations
- (2021) Benjaporn Narupai et al. ADVANCED FUNCTIONAL MATERIALS
- 3D and 4D Lithography of Untethered Microrobots
- (2021) Fatemeh Rajabasadi et al. PROGRESS IN MATERIALS SCIENCE
- Shape memory alloy based 3D printed composite actuators with variable stiffness and large reversible deformation
- (2021) Saeed Akbari et al. SENSORS AND ACTUATORS A-PHYSICAL
- A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers
- (2021) Oleg Testoni et al. Smart Materials and Structures
- 4D printing: Recent advances and proposals in the food sector
- (2021) Xiuxiu Teng et al. TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Irreversible and Repeatable Shape Transformation of Additively Manufactured Annular Composite Structures
- (2021) Bona Goo et al. Materials
- Mechanical characterization of glass and jute fiber-based hybrid composites fabricated through compression molding technique
- (2021) Muhammad Yasir Khalid et al. International Journal of Material Forming
- Cactus-inspired design principles for soft robotics based on 3D printed hydrogel-elastomer systems
- (2021) Anil K. Bastola et al. MATERIALS & DESIGN
- Hybrid hinge structure with elastic hinge on self-folding of 4D printing using a fused deposition modeling 3D printer
- (2021) Shunsuke Yamamura et al. MATERIALS & DESIGN
- Digital Light Processing 4D Printing of Transparent, Strong, Highly Conductive Hydrogels
- (2021) Yangyang He et al. ACS Applied Materials & Interfaces
- Shape memory materials and 4D printing in pharmaceutics
- (2021) Alice Melocchi et al. ADVANCED DRUG DELIVERY REVIEWS
- 3D and 4D printing: From innovation to evolution
- (2021) Shadpour Mallakpour et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Synergistic combination of 4D printing and conventional metal plating for the fabrication of highly-conductive electrical devices
- (2021) Benjamin Qi Yu Chan et al. CHEMICAL ENGINEERING JOURNAL
- Tracing evolutions in electro-activated shape memory polymer composites with 4D printing strategies: A systematic review
- (2021) Xiayan Huang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- 4D-printed bi-material composite laminate for manufacturing reversible shape-change structures
- (2021) Yanan Wang et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of polymeric composites from material processing to structural design
- (2021) Shangqin Yuan et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing landscape and materials perspective in 4D printing
- (2021) Muhammad Imran Farid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Geometric design of 4D printed bilayer structures for accurate folding deformation
- (2021) Han Liu et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- Community-driven PPE production using additive manufacturing during the COVID-19 pandemic: Survey and lessons learned
- (2021) Hannah D. Budinoff et al. JOURNAL OF MANUFACTURING SYSTEMS
- Applications of additive manufacturing (AM) in sustainable energy generation and battle against COVID-19 pandemic: The knowledge evolution of 3D printing
- (2021) Yanen Wang et al. JOURNAL OF MANUFACTURING SYSTEMS
- Shape memory and mechanical characterization of polylactic acid wood composite fabricated by fused filament fabrication 4D printing technology
- (2021) A. Sharma et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- 4D Aliphatic photopolymer polycarbonates as direct ink writing of biodegradable, conductive graphite‐composite materials
- (2021) Scott Brooks et al. POLYMER COMPOSITES
- Functional applications of 4D printing: a review
- (2021) Shubham Shankar Mohol et al. RAPID PROTOTYPING JOURNAL
- 4D printing soft robots guided by machine learning and finite element models
- (2021) Ali Zolfagharian et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)
- (2021) Abishek Kafle et al. Polymers
- Modeling the Producibility of 3D Printing in Polylactic Acid Using Artificial Neural Networks and Fused Filament Fabrication
- (2021) Mohammad Saleh Meiabadi et al. Polymers
- Porous PLAs with Controllable Density by FDM 3D Printing and Chemical Foaming Agent
- (2021) A. R. Damanpack et al. Micromachines
- A review on laser cladding of high-entropy alloys, their recent trends and potential applications
- (2021) Zia Ullah Arif et al. Journal of Manufacturing Processes
- 4D printing of highly printable and shape morphing hydrogels composed of alginate and methylcellulose
- (2021) Jiahui Lai et al. MATERIALS & DESIGN
- Additive manufacturing of polymer nanocomposites: Needs and challenges in materials, processes, and applications
- (2021) Ans Al Rashid et al. Journal of Materials Research and Technology-JMR&T
- Recent advances in nanocellulose-based different biomaterials: types, properties, and emerging applications
- (2021) Muhammad Yasir Khalid et al. Journal of Materials Research and Technology-JMR&T
- Deformable Bowtie Antenna Realized by 4D Printing
- (2021) Lei Wu et al. Electronics
- Approaches of combining a 3D-printed elastic structure and a hydrogel to create models for plant-inspired actuators
- (2021) Nadia Rodriguez et al. MRS Advances
- Bioprinting: A review of processes, materials and applications
- (2021) Bengi Yilmaz et al. Bioprinting
- 4D Printing for Automotive Industry Applications
- (2021) Ankush Raina et al. Journal of The Institution of Engineers (India): Series D
- Four-Dimensional Printed Shape Memory Metasurface to Memorize Absorption and Reflection Functions
- (2021) Heijun Jeong et al. ACS Applied Materials & Interfaces
- Weldable and Reprocessable Shape Memory Epoxy Vitrimer Enabled by Controlled Formulation for Extrusion‐Based 4D Printing Applications
- (2021) Seonhui Choi et al. ADVANCED ENGINEERING MATERIALS
- 4D Printing of Engineered Living Materials
- (2021) Laura K. Rivera‐Tarazona et al. ADVANCED FUNCTIONAL MATERIALS
- Machine Learning‐Evolutionary Algorithm Enabled Design for 4D‐Printed Active Composite Structures
- (2021) Xiaohao Sun et al. ADVANCED FUNCTIONAL MATERIALS
- Tackling Humidity with Designer Ionic Liquid‐Based Gas Sensing Soft Materials
- (2021) Carina Esteves et al. ADVANCED MATERIALS
- Complicated deformation simulating on temperature-driven 4D printed bilayer structures based on reduced bilayer plate model
- (2021) Junjie Song et al. APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
- 4D printed programmable auxetic metamaterials with shape memory effects
- (2021) Mengqi Wan et al. COMPOSITE STRUCTURES
- Recent advances in hard-magnetic soft composites: Synthesis, characterisation, computational modelling, and applications
- (2021) Sergio Lucarini et al. COMPOSITE STRUCTURES
- Temperature-dependent mechanical response of 4D printed composite lattice structures reinforced by continuous fiber
- (2021) Chengjun Zeng et al. COMPOSITE STRUCTURES
- Soft magnetic composites for highly deformable actuators by four-dimensional electrohydrodynamic printing
- (2021) Zhongbao Wang et al. COMPOSITES PART B-ENGINEERING
- 4D printed thermochromic Fresnel lenses for sensing applications
- (2021) Murad Ali et al. COMPOSITES PART B-ENGINEERING
- Multifunctional thermo-magnetically actuated hybrid soft millirobot based on 4D printing
- (2021) Xingyue Hu et al. COMPOSITES PART B-ENGINEERING
- Review on recent advances in 4D printing of shape memory polymers
- (2021) Yousif Saad Alshebly et al. EUROPEAN POLYMER JOURNAL
- Additive Manufacturing of Shape Memory Polymer Composites for Futuristic Technology
- (2021) Jigar Patadiya et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Applications of four-dimensional printing in emerging directions: Review and prospects
- (2021) Jinjian Huang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Highly Shrinkable Objects as Obtained from 4D Printing
- (2021) Dilip Chalissery et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Dynamic Finite-Element analysis of a soft bending actuator
- (2021) Leila Gharavi et al. MECHATRONICS
- Laser deposition of high-entropy alloys: A comprehensive review
- (2021) Zia Ullah Arif et al. OPTICS AND LASER TECHNOLOGY
- Evaluation of tensile properties of fiber metal laminates under different strain rates
- (2021) Muhammad Yasir Khalid et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- 3D-printed omnidirectional soft pneumatic actuators: Design, modeling and characterization
- (2021) Matheus S. Xavier et al. SENSORS AND ACTUATORS A-PHYSICAL
- Multi-responsive soft paper-based actuators with programmable shape-deformations
- (2021) Mingcen Weng et al. SENSORS AND ACTUATORS A-PHYSICAL
- On the design workflow of auxetic metamaterials for structural applications
- (2021) Matthew Wallbanks et al. Smart Materials and Structures
- Preparation of Smart Materials by Additive Manufacturing Technologies: A Review
- (2021) Kunal Mondal et al. Materials
- Fused Filament Fabrication Process: A Review of Numerical Simulation Techniques
- (2021) Ans Al Rashid et al. Polymers
- 4D Printing of Plasmon‐Encoded Tunable Polydimethylsiloxane Lenses for On‐Field Microscopy of Microbes
- (2021) Stefano Mariani et al. Advanced Optical Materials
- The status, barriers, challenges, and future in design for 4D printing
- (2021) Frédéric Demoly et al. MATERIALS & DESIGN
- The shape – morphing performance of magnetoactive soft materials
- (2021) Anil K. Bastola et al. MATERIALS & DESIGN
- 4D Printing Classroom in Modern Interactive Learning Environments
- (2021) Ali Zolfagharian et al. Bioprinting
- 4D Printing of a Bioinspired Microneedle Array with Backward‐Facing Barbs for Enhanced Tissue Adhesion
- (2020) Daehoon Han et al. ADVANCED FUNCTIONAL MATERIALS
- Recent progress in 4D printing of stimuli-responsive polymeric materials
- (2020) SuQian Ma et al. Science China-Technological Sciences
- Design of a continuous fiber trajectory for 4D printing of thermally stimulated composite structures
- (2020) XiaoYong Tian et al. Science China-Technological Sciences
- Applications of additive manufacturing in fabrication of sensors - A review
- (2020) Mohammad Reza Khosravani et al. SENSORS AND ACTUATORS A-PHYSICAL
- Multi-Trigger Thermo-Electro-Mechanical Soft Actuators under Large Deformations
- (2020) Ebrahim Yarali et al. Polymers
- Twisted composite structures made by 4D printing method
- (2020) Suong V. Hoa et al. COMPOSITE STRUCTURES
- 4D Printing of shape memory polymers
- (2020) Alsha Subash et al. EUROPEAN POLYMER JOURNAL
- Reversible energy absorbing meta-sandwiches by FDM 4D printing
- (2020) M. Bodaghi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A comprehensive review on thermomechanical constitutive models for shape memory polymers
- (2020) Ebrahim Yarali et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- 4D-Printed Dynamic Materials in Biomedical Applications: Chemistry, Challenges, and Their Future Perspectives in the Clinical Sector
- (2020) Wenxian Zhou et al. JOURNAL OF MEDICINAL CHEMISTRY
- Controlled Helical Deformation of Programmable Bilayer Structures: Design and Fabrication
- (2020) Yixiong Feng et al. Smart Materials and Structures
- Contact/impact modeling and analysis of 4D printed shape memory polymer beams
- (2020) Alireaz Damanpack Moqadam et al. Smart Materials and Structures
- 3D constitutive modelling of electro-magneto-visco-hyperelastic elastomers: a semi-analytical solution for cylinders under large torsion-extension deformation
- (2020) Ebrahim Yarali et al. Smart Materials and Structures
- Multicolor 4D printing of shape-memory polymers for light-induced selective heating and remote actuation
- (2020) Hoon Yeub Jeong et al. Scientific Reports
- Multi-Material 3D Printed Shape Memory Polymer with Tunable Melting and Glass Transition Temperature Activated by Heat or Light
- (2020) Ela Sachyani Keneth et al. Polymers
- Finite Element Methods in Smart Materials and Polymers
- (2020) Akif Kaynak et al. Polymers
- Control-Based 4D Printing: Adaptive 4D-Printed Systems
- (2020) Ali Zolfagharian et al. Applied Sciences-Basel
- 4D printing composite with electrically controlled local deformation
- (2020) Li-Hua Shao et al. Extreme Mechanics Letters
- Future of Additive Manufacturing: Overview of 4D and 3D Printed Smart and Advanced Materials and their Applications
- (2020) Kirstie R. Ryan et al. CHEMICAL ENGINEERING JOURNAL
- Smart polymers and nanocomposites for 3D and 4D printing
- (2020) Mojtaba Falahati et al. Materials Today
- A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams
- (2020) Saeed Kamarian et al. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
- A review of 3D printing processes and materials for soft robotics
- (2020) Yee Ling Yap et al. RAPID PROTOTYPING JOURNAL
- On 4D printing as a revolutionary fabrication technique for smart structures
- (2020) Stephen Kirwa Melly et al. Smart Materials and Structures
- Functional Polymers in Sensors and Actuators: Fabrication and Analysis
- (2020) Akif Kaynak et al. Polymers
- Direct Ink Writing Based 4D Printing of Materials and Their Applications
- (2020) Xue Wan et al. Advanced Science
- Concepts and Terminologies in 4D Printing
- (2020) Eujin Pei et al. Applied Sciences-Basel
- Laws of 4D Printing
- (2020) Farhang Momeni et al. Engineering
- 3D/4D-printed bending-type soft pneumatic actuators: fabrication, modelling, and control
- (2020) Ali Zolfagharian et al. Virtual and Physical Prototyping
- A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
- (2020) Yuliang Xia et al. ADVANCED MATERIALS
- Recent progress of magnetorheological elastomers: a review
- (2020) Anil Kumar Bastola et al. Smart Materials and Structures
- Contactless reversible 4D-printing for 3D-to-3D shape morphing
- (2020) Amelia Yilin Lee et al. Virtual and Physical Prototyping
- 4D Printing of Glass Fiber-Regulated Shape Shifting Structures with High Stiffness
- (2020) Shayuan Weng et al. ACS Applied Materials & Interfaces
- 4D Printable Tough and Thermoresponsive Hydrogels
- (2020) Mutian Hua et al. ACS Applied Materials & Interfaces
- 4D Printing Elastic Composites for Strain-Tailored Multistable Shape Morphing
- (2020) Heng Deng et al. ACS Applied Materials & Interfaces
- Selective Laser Sintering-Based 4D Printing of Magnetism-Responsive Grippers
- (2020) Hongzhi Wu et al. ACS Applied Materials & Interfaces
- 4D Printing of shape-memory polymeric scaffolds for adaptive biomedical implantation
- (2020) Cheng Zhang et al. Acta Biomaterialia
- Medical Application of Biomimetic 4D Printing
- (2020) Sara Shakibania et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Crack self-healing of thermo-responsive shape memory polymers with application to control valves, filtration, and drug delivery capsule
- (2020) Mahdi Baniasadi et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Inkjet-/3D-/4D-Printed Perpetual Electronics and Modules: RF and mm-Wave Devices for 5G+, IoT, Smart Agriculture, and Smart Cities Applications
- (2020) Aline Eid et al. IEEE MICROWAVE MAGAZINE
- An accurate finite element approach for programming 4D-printed self-morphing structures produced by fused deposition modeling
- (2020) Yanan Wang et al. MECHANICS OF MATERIALS
- 4D printing and collaborative design of highly flexible shape memory alloy structures: a case study for a metallic robot prototype
- (2020) Tao Yao et al. Smart Materials and Structures
- 4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field
- (2020) Ankur Bajpai et al. Sustainability
- Constitutive Modeling of multi-stimuli-responsive shape memory polymers with multi-functional capabilities
- (2020) Mahdi Baniasadi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Reprogrammable recovery and actuation behaviour of shape-memory polymers
- (2019) Andreas Lendlein et al. Nature Reviews Materials
- 4D printed tunable mechanical metamaterials with shape memory operations
- (2019) M Bodaghi et al. Smart Materials and Structures
- Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
- (2019) Carmen M. González-Henríquez et al. PROGRESS IN POLYMER SCIENCE
- Multiple and two-way reversible shape memory polymers: Design strategies and applications
- (2019) Kaojin Wang et al. PROGRESS IN MATERIALS SCIENCE
- Bending control of a 3D printed polyelectrolyte soft actuator with uncertain model
- (2019) Ali Zolfagharian et al. SENSORS AND ACTUATORS A-PHYSICAL
- Multimaterial 3D Printed Soft Actuators Powered by Shape Memory Alloy Wires
- (2019) Saeed Akbari et al. SENSORS AND ACTUATORS A-PHYSICAL
- System Identification and Robust Tracking of a 3D Printed Soft Actuator
- (2019) Ali Zolfagharian et al. Smart Materials and Structures
- 4D Printing Self-Morphing Structures
- (2019) Mahdi Bodaghi et al. Materials
- 4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions
- (2019) MD Nahin Islam Shiblee et al. Advanced Materials Technologies
- Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
- (2019) Xiaozhou Xin et al. ACTA MECHANICA SOLIDA SINICA
- Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
- (2019) Prasansha Rastogi et al. CHEMICAL ENGINEERING JOURNAL
- Review of mechanisms and deformation behaviors in 4D printing
- (2019) Han Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 4D printing smart biosystems for nanomedicine
- (2019) Wei Zhu et al. Nanomedicine
- Indirect 3D and 4D Printing of Soft Robotic Microstructures
- (2019) Carmela de Marco et al. Advanced Materials Technologies
- 4D printing: a critical review of current developments, and future prospects
- (2019) Md. Hazrat Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Expandable drug delivery system for gastric retention based on shape memory polymers: Development via 4D printing and extrusion
- (2019) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Light to Shape the Future: From Photolithography to 4D Printing
- (2019) Jesús del Barrio et al. Advanced Optical Materials
- Magnetic programming of 4D printed shape memory composite structures
- (2019) Fenghua Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations
- (2019) S. Kamarian et al. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
- Inkjet 3D printed microfluidic device for growing seed root and stalk mechanical characterization
- (2019) Rafał Walczak et al. SENSORS AND ACTUATORS A-PHYSICAL
- Bioactuators based on stimulus-responsive hydrogels and their emerging biomedical applications
- (2019) Qiang Shi et al. NPG Asia Materials
- Review of Polymeric Materials in 4D Printing Biomedical Applications
- (2019) Ming-You Shie et al. Polymers
- Pre-programmed Tri-layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes
- (2019) Ela Sachyani Keneth et al. Soft Robotics
- Design for 4D printing: Modeling and computation of smart materials distributions
- (2019) Germain Sossou et al. MATERIALS & DESIGN
- 4D Printing at the Microscale
- (2019) Christoph A. Spiegel et al. ADVANCED FUNCTIONAL MATERIALS
- 3D printed shape-programmable magneto-active soft matter for biomimetic applications
- (2019) Song Qi et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Active control of 4D prints: Towards 4D printed reliable actuators and sensors
- (2019) I.T. Garces et al. SENSORS AND ACTUATORS A-PHYSICAL
- Closed-loop 4D-printed soft robots
- (2019) Ali Zolfagharian et al. MATERIALS & DESIGN
- Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
- (2018) Milena Nadgorny et al. ACS Applied Materials & Interfaces
- Novel Materials for 3D Printing by Photopolymerization
- (2018) Michael Layani et al. ADVANCED MATERIALS
- 4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
- (2018) Marta Invernizzi et al. EUROPEAN POLYMER JOURNAL
- Development of hybrid magnetorheological elastomers by 3D printing
- (2018) A.K. Bastola et al. POLYMER
- A digital light processing 3D printer for fast and high-precision fabrication of soft pneumatic actuators
- (2018) Lisen Ge et al. SENSORS AND ACTUATORS A-PHYSICAL
- Pattern-driven 4D printing
- (2018) Ali Zolfagharian et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D printed soft parallel actuator
- (2018) Ali Zolfagharian et al. Smart Materials and Structures
- Triple shape memory polymers by 4D printing
- (2018) M Bodaghi et al. Smart Materials and Structures
- Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation
- (2018) et al. Materials
- Design, fabrication and control of origami robots
- (2018) Daniela Rus et al. Nature Reviews Materials
- Biomedical applications of soft robotics
- (2018) Matteo Cianchetti et al. Nature Reviews Materials
- Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers
- (2018) Ugur Bozuyuk et al. ACS Nano
- Advances and future perspectives in 4D bioprinting
- (2018) Nureddin Ashammakhi et al. Biotechnology Journal
- Design of a Shape Memory Composite(SMC) using 4D printing technology
- (2018) Youngjun Pyo et al. SENSORS AND ACTUATORS A-PHYSICAL
- Responsive cellulose-hydrogel composite ink for 4D printing
- (2018) Manu C. Mulakkal et al. MATERIALS & DESIGN
- 4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
- (2018) Pengfei Zhu et al. ACS Applied Materials & Interfaces
- Advances in 4D Printing: Materials and Applications
- (2018) Xiao Kuang et al. ADVANCED FUNCTIONAL MATERIALS
- 4D Printing based piezoelectric composite for medical applications
- (2018) Daniel Grinberg et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
- (2018) Devin J Roach et al. Smart Materials and Structures
- Multistable Thermal Actuators Via Multimaterial 4D Printing
- (2018) Hoon Yeub Jeong et al. Advanced Materials Technologies
- Development of composite springs using 4D printing method
- (2018) Suong Van Hoa COMPOSITE STRUCTURES
- 4D Printed Actuators with Soft-Robotic Functions
- (2017) María López-Valdeolivas et al. MACROMOLECULAR RAPID COMMUNICATIONS
- A finite-strain constitutive model for anisotropic shape memory alloys
- (2017) A.R. Damanpack et al. MECHANICS OF MATERIALS
- Development and analysis of a 3D printed hydrogel soft actuator
- (2017) Ali Zolfagharian et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments
- (2017) Kyuyoung Kim et al. SENSORS AND ACTUATORS A-PHYSICAL
- Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling
- (2017) G F Hu et al. Smart Materials and Structures
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Large deformations of soft metamaterials fabricated by 3D printing
- (2017) M. Bodaghi et al. MATERIALS & DESIGN
- A review of 4D printing
- (2017) Farhang Momeni et al. MATERIALS & DESIGN
- Adaptive metamaterials by functionally graded 4D printing
- (2017) M. Bodaghi et al. MATERIALS & DESIGN
- Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
- (2016) Milena Nadgorny et al. ACS Applied Materials & Interfaces
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Evolution of 3D printed soft actuators
- (2016) Ali Zolfagharian et al. SENSORS AND ACTUATORS A-PHYSICAL
- Self-expanding/shrinking structures by 4D printing
- (2016) M Bodaghi et al. Smart Materials and Structures
- Soft Robotic Grippers for Biological Sampling on Deep Reefs
- (2016) Kevin C. Galloway et al. Soft Robotics
- 3D Printed Reversible Shape Changing Components with Stimuli Responsive Materials
- (2016) Yiqi Mao et al. Scientific Reports
- Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
- (2015) Joyce C. Breger et al. ACS Applied Materials & Interfaces
- Modeling and analysis of reversible shape memory adaptive panels
- (2015) M Bodaghi et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- Direct 3D printing of polymers onto textiles: experimental studies and applications
- (2015) Eujin Pei et al. RAPID PROTOTYPING JOURNAL
- 4D Printing Technology: A Review
- (2015) Jin Choi et al. 3D Printing and Additive Manufacturing
- Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
- (2015) Yiqi Mao et al. Scientific Reports
- Stimuli-Responsive Theragrippers for Chemomechanical Controlled Release
- (2014) Kate Malachowski et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- 4D Printing: dawn of an emerging technology cycle
- (2014) Eujin Pei ASSEMBLY AUTOMATION
- A review of stimuli-responsive shape memory polymer composites
- (2013) Harper Meng et al. POLYMER
- Self-folding micropatterned polymeric containers
- (2010) Anum Azam et al. BIOMEDICAL MICRODEVICES
- Review of electro-active shape-memory polymer composite
- (2008) Yanju Liu et al. COMPOSITES SCIENCE AND TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search