The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

(2019) R.J.M. Wolfs et al.   CEMENT AND CONCRETE RESEARCH

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

(2019) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development

(2019) Chen et al.   Applied Sciences-Basel

An approach to develop printable strain hardening cementitious composites

(2019) Stefan Chaves Figueiredo et al.   MATERIALS & DESIGN

Multi-sensor evaluation of the concrete within the interlayer bond with regard to pull-off adhesion

(2018) Łukasz Sadowski et al.   Archives of Civil and Mechanical Engineering

Fresh and hardened properties of 3D printable cementitious materials for building and construction

(2018) Suvash Chandra Paul et al.   Archives of Civil and Mechanical Engineering

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

(2018) R.J.M. Wolfs et al.   CEMENT AND CONCRETE RESEARCH

Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry

(2018) Delphine Marchon et al.   CEMENT AND CONCRETE RESEARCH

Rheological requirements for printable concretes

(2018) Nicolas Roussel   CEMENT AND CONCRETE RESEARCH

Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)

(2018) Ye Qian et al.   CEMENT AND CONCRETE RESEARCH

Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing

(2018) Biranchi Panda et al.   CERAMICS INTERNATIONAL

Effect of surface moisture on inter-layer strength of 3D printed concrete

(2018) Jay G. Sanjayan et al.   CONSTRUCTION AND BUILDING MATERIALS

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

A review of 3D concrete printing systems and materials properties: current status and future research prospects

(2018) Suvash Chandra Paul et al.   RAPID PROTOTYPING JOURNAL

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

(2018) Biranchi Panda et al.   CEMENT & CONCRETE COMPOSITES

A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing

(2018) Zhu Ding et al.   Materials

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

(2018) Biranchi Panda et al.   MATERIALS LETTERS

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

(2018) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling

(2017) Dong Liu et al.   INTERNATIONAL JOURNAL OF FRACTURE

Mechanical and microstructural characterization of alkali sulfate activated high volume fly ash binders

(2017) Akash Dakhane et al.   MATERIALS & DESIGN

The thixotropic behavior of fresh cement asphalt emulsion paste

(2016) Jian Ouyang et al.   CONSTRUCTION AND BUILDING MATERIALS

Quantitative XRD Analysis of Binary Blends of Siliceous Fly Ash and Hydrated Cement

(2016) G. V. P. Bhagath Singh et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Method for Direct Determination of Glassy Phase Dissolution in Hydrating Fly Ash-Cement System Using X-ray Diffraction

(2016) Gangapatnam V. P. Bhagath Singh et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Construction by Contour Crafting using sulfur concrete with planetary applications

(2016) Behrokh Khoshnevis et al.   RAPID PROTOTYPING JOURNAL

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

(2016) C. Gosselin et al.   MATERIALS & DESIGN

Effect of Moisture Exchange on Interface Formation in the Repair System Studied by X-ray Absorption

(2015) Mladena Lukovic et al.   Materials

Micromechanical Study of the Interface Properties in Concrete Repair Systems

(2014) Mladena Luković et al.   Journal of Advanced Concrete Technology

Hardened properties of high-performance printing concrete

(2012) T.T. Le et al.   CEMENT AND CONCRETE RESEARCH

Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays

(2012) Shiho Kawashima et al.   CONSTRUCTION AND BUILDING MATERIALS

Supplementary cementitious materials

(2011) Barbara Lothenbach et al.   CEMENT AND CONCRETE RESEARCH