Vibration induced active rheology control for 3D concrete printing

Yield stress criteria to assess the buildability of 3D concrete printing

(2020) R. Jayathilakage et al.   CONSTRUCTION AND BUILDING MATERIALS

Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review

(2020) V. Mechtcherine et al.   CEMENT AND CONCRETE RESEARCH

Elastic buckling and plastic collapse during 3D concrete printing

(2020) A.S.J. Suiker et al.   CEMENT AND CONCRETE RESEARCH

Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications

(2019) Roshan Jayathilakage et al.   MATERIALS AND STRUCTURES

Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification

(2019) Taylor Marchment et al.   MATERIALS & DESIGN

Rheological behaviors and model of fresh concrete in vibrated state

(2019) Zhuguo Li et al.   CEMENT AND CONCRETE RESEARCH

The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

(2019) Biranchi Panda et al.   Materials

3D concrete printing: A lower bound analytical model for buildability performance quantification

(2019) Jacques Kruger et al.   AUTOMATION IN CONSTRUCTION

Mesh reinforcing method for 3D Concrete Printing

(2019) Taylor Marchment et al.   AUTOMATION IN CONSTRUCTION

Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC)

(2018) Ye Qian et al.   CEMENT AND CONCRETE RESEARCH

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

(2018) R.J.M. Wolfs et al.   CEMENT AND CONCRETE RESEARCH

3D printing using concrete extrusion: A roadmap for research

(2018) R.A. Buswell et al.   CEMENT AND CONCRETE RESEARCH

Rheological requirements for printable concretes

(2018) Nicolas Roussel   CEMENT AND CONCRETE RESEARCH

Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments

(2018) A.S.J. Suiker   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Vision of 3D printing with concrete — Technical, economic and environmental potentials

(2018) Geert De Schutter et al.   CEMENT AND CONCRETE RESEARCH

Active control of properties of concrete: a (p)review

(2018) Geert De Schutter et al.   MATERIALS AND STRUCTURES

Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures

(2018) Mir Alimohammad Mirgozar Langaroudi et al.   CONSTRUCTION AND BUILDING MATERIALS

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

(2015) A. Perrot et al.   MATERIALS AND STRUCTURES

Set-on-demand concrete

(2014) Sriramya Duddukuri Nair et al.   CEMENT AND CONCRETE RESEARCH

Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion

(2013) Xiangming Zhou et al.   CEMENT & CONCRETE COMPOSITES

Testing pumpability of concrete using Sliding Pipe Rheometer

(2013) Viktor Mechtcherine et al.   CONSTRUCTION AND BUILDING MATERIALS

Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays

(2012) Shiho Kawashima et al.   CONSTRUCTION AND BUILDING MATERIALS

Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate

(2012) Arnoud Perrot et al.   RHEOLOGICA ACTA

Nanotechnology in concrete – A review

(2010) Florence Sanchez et al.   CONSTRUCTION AND BUILDING MATERIALS

Vibro-extrusion: a new forming process for cement-based materials

(2009) A. Perrot et al.   ADVANCES IN CEMENT RESEARCH

Influence of clays on the rheology of cement pastes

(2009) Nathan A. Tregger et al.   CEMENT AND CONCRETE RESEARCH