Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges
Authors
Keywords
-
Journal
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-50
Publisher
Informa UK Limited
Online
2021-10-16
DOI
10.1080/09506608.2021.1971427
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts
- (2021) Davoud Jafari et al. MATERIALS & DESIGN
- Microstructure Formation and Mechanical Properties of a Wire-Arc Additive Manufactured Magnesium Alloy
- (2021) Thomas Klein et al. JOM
- Contactless temperature measurement in wire-based electron beam additive manufacturing Ti-6Al-4V
- (2021) F. Pixner et al. Welding in the World
- Microstructure Evolution and Mechanical Behavior of Laser Melting Deposited TA15 Alloy at 500 °C under In-Situ Tension in SEM
- (2021) Muhammad Rizwan et al. Acta Metallurgica Sinica-English Letters
- Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing
- (2020) Vittoria Laghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analytical modeling of residual stress in direct metal deposition considering scan strategy
- (2020) Elham Mirkoohi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fabrication of SS316L to Ni80Cr20 graded structures by 3D plasma metal deposition
- (2020) K. Hoefer et al. Welding in the World
- Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere
- (2020) Eva M. Perez-Soriano et al. Metals
- Plasma transfer arc additive manufacturing of 17-4 PH: assessment of defects
- (2020) Sandy N. El Moghazi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature
- (2020) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructural and mechanical characteristics of 308L stainless steel manufactured by gas metal arc welding-based additive manufacturing
- (2020) Van Thao Le et al. MATERIALS LETTERS
- Recrystallization behavior and tensile properties of laser metal deposited Inconel 718 upon in-situ ultrasonic impact peening and heat treatment
- (2020) Yachao Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigating Isotropy of Mechanical and Wear Properties in As-Deposited and Inter-Layer Cold Worked Specimens Manufactured by Wire Arc Additive Manufacturing
- (2020) Behzad Parvaresh et al. METALS AND MATERIALS INTERNATIONAL
- Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique
- (2020) Florian Pixner et al. Materials
- Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding
- (2020) Yangyang Guo et al. Journal of Magnesium and Alloys
- Effects of solution-aging treatments on microstructure features, mechanical properties and damage behaviors of additive manufactured Ti-6Al-4V alloy
- (2020) Zheng Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Heat-Treatment on the Microstructure, Mechanical Properties and Corrosion Behaviour of SS 316 Structures Built by Laser Directed Energy Deposition Based Additive Manufacturing
- (2020) K. Benarji et al. METALS AND MATERIALS INTERNATIONAL
- Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties
- (2020) Parnian Kiani et al. MATERIALS & DESIGN
- Concurrent geometry- and material-based process identification and optimization for robotic CMT-based wire arc additive manufacturing
- (2020) Thomas Lehmann et al. MATERIALS & DESIGN
- Process-structure relationship in the directed energy deposition of cobalt-chromium alloy (Stellite 21) coatings
- (2020) Ziyad Smoqi et al. MATERIALS & DESIGN
- Effects of ultrasonic peening treatment layer by layer on microstructure of components fabricated by wire and arc additive manufacturing
- (2020) Yinbao Tian et al. MATERIALS LETTERS
- Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process
- (2019) Arturo Gomez Ortega et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Forming Process, Microstructure, and Mechanical Properties of Thin-Walled 316L Stainless Steel Using Speed-Cold-Welding Additive Manufacturing
- (2019) Wei Wu et al. Metals
- Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel
- (2019) Leilei Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Three-dimensional printing of tungsten structures by directed energy deposition
- (2019) Wonjong Jeong et al. MATERIALS AND MANUFACTURING PROCESSES
- The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17-4 PH
- (2019) D. Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Multi-material Additive Manufacturing by 3D Plasma Metal Deposition for Graded Structures of Super Duplex Alloy 1.4410 and the Austenitic Corrosion Resistant Alloy 1.4404
- (2019) Kevin Hoefer et al. JOM
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- Correlation Between Heat-Treated Microstructure and Mechanical and Fretting Wear Behavior of Electron Beam Freeform-Fabricated Ti6Al4V Alloy
- (2019) Xuewei Tao et al. JOM
- Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing
- (2019) Jun Wang et al. MATERIALS LETTERS
- Effect of titanium powder on microstructure and mechanical properties of wire + arc additively manufactured Al-Mg alloy
- (2019) Liwei Wang et al. MATERIALS LETTERS
- Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications
- (2019) Nikita V. Muravyev et al. PROPELLANTS EXPLOSIVES PYROTECHNICS
- The effect of atmosphere on the composition of wire arc additive manufactured metal components
- (2019) John W. Elmer et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing
- (2019) Wang Yangfan et al. SURFACE & COATINGS TECHNOLOGY
- Laser Wire Deposition of a Large Ti-6Al-4V Space Component
- (2019) WELDING JOURNAL
- Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
- (2019) Tiago A. Rodrigues et al. Materials
- Precipitates in Additively Manufactured Inconel 625 Superalloy
- (2019) Beata Dubiel et al. Materials
- Characterization of Microstructure and Mechanical Properties of Stellite 6 Part Fabricated by Wire Arc Additive Manufacturing
- (2019) Zixiang Li et al. Metals
- Wire and Arc Additive Manufacturing of Aluminum Components
- (2019) Köhler et al. Metals
- Functionally Graded SS 316L to Ni-Based Structures Produced by 3D Plasma Metal Deposition
- (2019) Rodriguez et al. Metals
- Influences of postproduction heat treatments on the material anisotropy of nickel-aluminum bronze fabricated using wire-arc additive manufacturing process
- (2019) Chen Shen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire + Arc Additive Manufacture of 17-4 PH stainless steel: Effect of different processing conditions on microstructure, hardness, and tensile strength
- (2019) Armando Caballero et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing
- (2019) Z. Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy
- (2019) Yangyang Guo et al. MATERIALS LETTERS
- Microstructure and mechanical properties of as-built and heat-treated Ti-6Al-4V alloy prepared by cold metal transfer additive manufacturing
- (2019) Jian Gou et al. Journal of Manufacturing Processes
- Development of Wire + Arc additive manufacture for the production of large-scale unalloyed tungsten components
- (2019) G. Marinelli et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing
- (2019) Qiuyu Miao et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing
- (2019) Mehran Rafieazad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of wire feed geometry on electron beam freeform 3D printing of complex-shaped samples from Ti-6Al-4V alloy
- (2019) K. N. Kalashnikov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and mechanical properties of as-deposited and heat treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) alloy fabricated by laser melting deposition
- (2019) Hao Deng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The influence of heat treatments on the corrosion behaviour of nickel-based alloy 718
- (2019) L.C.M. Valle et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of solution temperature on static recrystallization and ductility of Inconel 625 superalloy fabricated by directed energy deposition
- (2019) Y.L. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A study on obtaining equiaxed prior-β grains of wire and arc additive manufactured Ti–6Al–4V
- (2019) Jian Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of laser metal deposited AlSi10Mg alloys
- (2019) Xian Wang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Investigation on Microstructure, Hardness and Wear Resistance of Electron Beam Wire-Feeding Deposited Inconel 718 Alloy Coatings
- (2019) Dongheng Xu et al. METALS AND MATERIALS INTERNATIONAL
- Robot assisted additive manufacturing: A review
- (2019) Pinar Urhal et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V and AlSi5 dissimilar alloys using cold metal transfer welding
- (2019) Yinbao Tian et al. Journal of Manufacturing Processes
- Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys
- (2019) Shivraman Thapliyal Materials Research Express
- On the ballistic perforation resistance of additive manufactured AlSi10Mg aluminium plates
- (2019) Martin Kristoffersen et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Wire + Arc Additively Manufactured Inconel 718: Effect of post-deposition heat treatments on microstructure and tensile properties
- (2019) Cui E. Seow et al. MATERIALS & DESIGN
- A review of mechanical properties of additively manufactured Inconel 718
- (2019) E. Hosseini et al. Additive Manufacturing
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Microstructure and mechanical properties of additive manufacturing AlSi10Mg alloy using direct metal deposition
- (2018) Bo Chen et al. FERROELECTRICS
- Assessment of the effect of different forms of Inconel 625 alloy feedstock in Plasma Transferred Arc (PTA) additive manufacturing
- (2018) Eloisa Pereira Cardozo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Adaptive process control of wire and arc additive manufacturing for fabricating complex-shaped components
- (2018) Fang Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts
- (2018) Fangda Xu et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Trace Carbon Addition to Refine Microstructure and Enhance Properties of Additive-Manufactured Ti-6Al-4V
- (2018) S. Mereddy et al. JOM
- Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming
- (2018) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy
- (2018) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of vibration and hot-wire gas tungsten arc (GTA) on the geometric shape
- (2018) Bishal Silwal et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel
- (2018) Yuehai Feng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing using WAAM with AA5183 wire
- (2018) A. Horgar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Enhanced beads overlapping model for wire and arc additive manufacturing of multi-layer multi-bead metallic parts
- (2018) Yongzhe Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V
- (2018) Peng-Hui Li et al. MATERIALS CHARACTERIZATION
- Fatigue crack growth anisotropy, texture and residual stress in austenitic steel made by wire and arc additive manufacturing
- (2018) J.V. Gordon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of travel speed and sub-β transus post deposition heat treatments on thin Ti-6Al-4V laser wire deposits
- (2018) N. Chekir et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
- (2018) Xiaohui Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermal and microstructural analysis of laser-based directed energy deposition for Ti-6Al-4V and Inconel 625 deposits
- (2018) Frederick Lia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source
- (2018) Chen Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Processing Route for Achieving Isotropic Tensile Properties in Laser Solid Formed α+β Titanium Alloy
- (2018) Qiang Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing
- (2018) Jayaprakash Sharma Panchagnula et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Rapid prototyping of 4043 Al-alloy parts by cold metal transfer
- (2018) Yunpeng Nie et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and properties of die steel fabricated by WAAM using H13 wire
- (2018) Tingting Wang et al. VACUUM
- Inclusion evolution in additive manufactured 316L stainless steel by laser metal deposition process
- (2018) Du-Rim Eo et al. MATERIALS & DESIGN
- Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
- (2018) J.R. Hönnige et al. MATERIALS & DESIGN
- Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting
- (2018) Chengcheng Wang et al. MATERIALS & DESIGN
- Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel
- (2018) Yu Sun et al. MATERIALS & DESIGN
- Support-free volume printing by multi-axis motion
- (2018) Chengkai Dai et al. ACM TRANSACTIONS ON GRAPHICS
- Large-scale 3D printing by a team of mobile robots
- (2018) Xu Zhang et al. AUTOMATION IN CONSTRUCTION
- Microstructures and properties of 80W-20Fe alloys prepared using laser melting deposition process
- (2018) Chun Li et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Influence of Shielding Gas Composition on Structure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625
- (2018) Ivan Jurić et al. JOM
- The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319
- (2018) E.M. Ryan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Progress in Additive Manufacturing on New Materials
- (2018) Neng Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel
- (2018) S.D. Meredith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser Wire Deposition of Thick Ti-6Al-4V Buildups: Heat Transfer Model, Microstructure, and Mechanical Properties Evaluations
- (2018) N. Chekir et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of α texture on the tensile deformation behavior of Ti–6Al–4V alloy produced via electron beam rapid manufacturing
- (2018) Zheng Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
- (2018) Chongliang Zhong et al. OPTICS AND LASER TECHNOLOGY
- Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment
- (2018) Fei Lv et al. OPTIK
- Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi method
- (2018) Yang Liu et al. OPTICS AND LASER TECHNOLOGY
- Microstructure evolution and mechanical properties of laser additive manufacturing of high strength Al-Cu-Mg alloy
- (2018) Tao Gu et al. OPTICS AND LASER TECHNOLOGY
- Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties
- (2017) X. Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser Additive Manufacturing of Magnetic Materials
- (2017) C. V. Mikler et al. JOM
- Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing
- (2017) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel
- (2017) Youheng Fu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High-throughput stochastic tensile performance of additively manufactured stainless steel
- (2017) Bradley C. Salzbrenner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment
- (2017) Jianjun Lin et al. Journal of the Mechanical Behavior of Biomedical Materials
- A comparative study of Inconel 625 laser cladding by wire and powder feedstock
- (2017) T. E. Abioye et al. MATERIALS AND MANUFACTURING PROCESSES
- Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties
- (2017) C.V. Mikler et al. MATERIALS LETTERS
- Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy
- (2017) Xiaogang You et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing
- (2017) Xiaohui Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities
- (2017) Y. Cai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process
- (2017) Bosheng Dong et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Experimental investigation on selective laser melting of 17-4PH stainless steel
- (2017) Zhiheng Hu et al. OPTICS AND LASER TECHNOLOGY
- Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy
- (2017) Yaocheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- Process planning for 8-axis robotized laser-based direct metal deposition system: A case on building revolved part
- (2017) Yaoyu Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Arc-based additive manufacturing of steel components—comparison of wire- and powder-based variants
- (2017) K. Hoefer et al. Welding in the World
- Additive manufacturing by means of laser-aided directed metal deposition of 2024 aluminium powder: Investigation and optimization
- (2017) Fabrizia Caiazzo et al. Advances in Mechanical Engineering
- Connected fermat spirals for layered fabrication
- (2016) Haisen Zhao et al. ACM TRANSACTIONS ON GRAPHICS
- Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
- (2016) Donghong Ding et al. COMPUTER-AIDED DESIGN
- Recent advances in grain refinement of light metals and alloys
- (2016) M.A. Easton et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
- (2016) Yuwei Zhai et al. ENGINEERING FAILURE ANALYSIS
- Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing
- (2016) J. Y. Bai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arc
- (2016) Oguzhan Yilmaz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on direct laser powder deposition of 18 Ni (300) marage steel using mathematical model and experimental characterisation
- (2016) Sabina Luisa Campanelli et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer and flow structure characterization for pin fins produced by cold spray additive manufacturing
- (2016) Philippe Dupuis et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing
- (2016) Yaoyu Ding et al. JOM
- Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture
- (2016) Q. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Adaptive path planning for wire-feed additive manufacturing using medial axis transformation
- (2016) Donghong Ding et al. JOURNAL OF CLEANER PRODUCTION
- Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing
- (2016) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy
- (2016) Q. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solidification Microstructure of Laser Additive Manufactured Ti6Al2Zr2Sn3Mo1.5Cr2Nb Titanium Alloy
- (2016) Qiang Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive Manufacturing of AlSi10Mg Alloy Using Direct Energy Deposition: Microstructure and Hardness Characterization
- (2016) M. Javidani et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering
- (2016) Nancy Yang et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V
- (2016) J. Donoghue et al. MATERIALS CHARACTERIZATION
- Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
- (2016) Amanda J. Sterling et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat-treatment on the dynamic behavior of 3D laser-deposited Ti–6Al–4V alloy
- (2016) Jin Yao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
- (2016) Arne Röttger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
- (2016) J.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping
- (2016) Michał Ziętala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
- (2016) Qiang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
- (2016) Nesma T. Aboulkhair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al–6.3Cu alloy
- (2016) Jianglong Gu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of tungsten heavy alloys fabricated by laser direct deposition
- (2016) G.-Y. Wang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Automatic multi-direction slicing algorithms for wire based additive manufacturing
- (2016) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing
- (2016) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
- (2016) Jing Guo et al. Materials
- Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
- (2016) Donghong Ding et al. Materials
- Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing
- (2016) J.J. Lin et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Process planning for additive and subtractive manufacturing technologies
- (2015) Stephen T. Newman et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Support slimming for single material based additive manufacturing
- (2015) Kailun Hu et al. COMPUTER-AIDED DESIGN
- Additive manufacturing using plasma transferred arc
- (2015) E. A. Alberti et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Real-time control of microstructure in laser additive manufacturing
- (2015) Mohammad H. Farshidianfar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wire-feed additive manufacturing of metal components: technologies, developments and future interests
- (2015) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting
- (2015) K. Saeidi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
- (2015) T. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2015) Yanyan Zhu et al. MATERIALS & DESIGN
- Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
- (2015) Tyler LeBrun et al. MATERIALS & DESIGN
- Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy
- (2015) Mingming Ma et al. MATERIALS CHARACTERIZATION
- Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures
- (2015) Peng-Hui Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
- (2015) Yan Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
- (2015) Filomeno Martina et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process
- (2015) Chen Shen et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Computer vision technology for seam tracking in robotic GTAW and GMAW
- (2015) Yanling Xu et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Processamento de Ligas de Níquel com Técnica de Manufatura Aditiva Utilizando Plasma por Arco Transferido
- (2015) Eduardo André Alberti et al. Soldagem & Inspecao
- Bridging the gap
- (2014) Jérémie Dumas et al. ACM TRANSACTIONS ON GRAPHICS
- Hybrid processes in manufacturing
- (2014) Bert Lauwers et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts
- (2014) Zicheng Zhu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy
- (2014) Baoqiang Cong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A tool-path generation strategy for wire and arc additive manufacturing
- (2014) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A three dimensional transient model for heat transfer and fluid flow of weld pool during electron beam freeform fabrication of Ti-6-Al-4-V alloy
- (2014) Qun Tang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection
- (2014) Yannick Cormier et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
- (2014) Gustavo Tapia et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Development of micro-plasma transferred arc (μ-PTA) wire deposition process for additive layer manufacturing applications
- (2014) Suyog Jhavar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
- (2014) F. Calignano MATERIALS & DESIGN
- Effect of heat treatment on microstructure and tensile properties of laser deposited titanium alloy TC21
- (2014) L. Zhuo et al. MATERIALS RESEARCH INNOVATIONS
- Improvement of strategies and parameters for multi-axis laser cladding operations
- (2014) A. Calleja et al. OPTICS AND LASERS IN ENGINEERING
- Perspectives on Titanium Science and Technology
- (2013) Dipankar Banerjee et al. ACTA MATERIALIA
- Oxide films in laser additive manufactured Inconel 718
- (2013) Y.N. Zhang et al. ACTA MATERIALIA
- A review of hybrid manufacturing processes – state of the art and future perspectives
- (2013) Z. Zhu et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Effect of heat treatment on microstructure and mechanical properties of laser deposited Ti60A alloy
- (2013) Ali Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study on the designing rules and processability of porous structure based on selective laser melting (SLM)
- (2013) Di Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adaptive control of deposited height in GMAW-based layer additive manufacturing
- (2013) Jun Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
- (2013) Fujia Xu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Characterization of stainless steel parts by Laser Metal Deposition Shaping
- (2013) Kai Zhang et al. MATERIALS & DESIGN
- Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy
- (2013) C.M. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling and Analysis of the Weld Bead Geometry in Submerged Arc Welding by Using Adaptive Neurofuzzy Inference System
- (2013) Nuri Akkas et al. MATHEMATICAL PROBLEMS IN ENGINEERING
- Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
- (2013) Jun Xiong et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components
- (2013) Jon Lambarri et al. OPTICS AND LASERS IN ENGINEERING
- A Low-Cost Open-Source Metal 3-D Printer
- (2013) Gerald C. Anzalone et al. IEEE Access
- Problems and issues in laser beam welding of aluminum–lithium alloys
- (2013) Rongshi Xiao et al. Journal of Manufacturing Processes
- Development of a real-time laser-based machine vision system to monitor and control welding processes
- (2012) Wei Huang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing
- (2012) Jun Xiong et al. JOURNAL OF CLEANER PRODUCTION
- Laser metal deposition of Inconel 625: Microstructure and mechanical properties
- (2012) Marleen Rombouts et al. JOURNAL OF LASER APPLICATIONS
- Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V
- (2012) F. Martina et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on influential factors for process monitoring and control in laser aided additive manufacturing
- (2012) G. Bi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Theoretical investigations into heat transfer in laser-welded steel sheets
- (2012) Wiesława Piekarska et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition
- (2012) F.J. Xu et al. MATERIALS & DESIGN
- Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition
- (2012) J. Yu et al. MATERIALS & DESIGN
- Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
- (2012) Erhard Brandl et al. MATERIALS LETTERS
- Elevated temperature characterization of electron beam freeform fabricated Ti–6Al–4V and dispersion strengthened Ti–8Al–1Er
- (2012) R.W. Bush et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
- (2012) Fude Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
- (2012) Almir Heralić et al. OPTICS AND LASERS IN ENGINEERING
- A new DFM approach to combine machining and additive manufacturing
- (2011) Olivier Kerbrat et al. COMPUTERS IN INDUSTRY
- Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy
- (2011) Fude Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)
- (2011) Bernd Baufeld JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
- (2011) Bernd Baufeld et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Isothermal aging effect on the microstructure and dry sliding wear behavior of Co–28Cr–5Mo–0.3C alloy
- (2011) H. R. Lashgari et al. JOURNAL OF MATERIALS SCIENCE
- Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructure evolution of sub-critical annealed laser deposited Ti–6Al–4V alloy
- (2011) Y. Lu et al. MATERIALS & DESIGN
- Artificial ageing of Al–Si–Cu–Mg casting alloys
- (2011) E. Sjölander et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recrystallization and its influence on microstructures and mechanical properties of laser solid formed nickel base superalloy Inconel 718
- (2011) Fencheng Liu et al. RARE METALS
- A novel control algorithm for weld pool control
- (2010) Fenglin Lü et al. Industrial Robot-The International Journal of Robotics Research and Application
- Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
- (2010) J. Alcisto et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The heat treatment of Al–Si–Cu–Mg casting alloys
- (2010) Emma Sjölander et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures
- (2010) P. Ganesh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Carbide Formation and Dissolution in Biomedical Co-Cr-Mo Alloys with Different Carbon Contents during Solution Treatment
- (2010) Shingo Mineta et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Characterization of a Polycrystalline Nickel-Based Superalloy Processed via Tungsten-Intert-Gas-Shaped Metal Deposition
- (2010) Daniel Clark et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Low cost integration of additive and subtractive processes for hybrid layered manufacturing
- (2010) K.P. Karunakaran et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Measurement and Defect Detection of the Weld Bead Based on Online Vision Inspection
- (2009) Yuan Li et al. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
- Process planning strategies for solid freeform fabrication of metal parts
- (2009) Lan Ren et al. JOURNAL OF MANUFACTURING SYSTEMS
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping
- (2009) Félix A. España et al. Materials Science & Engineering C-Materials for Biological Applications
- Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
- (2009) G.P. Dinda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Heat-treated microstructure and mechanical properties of laser solid forming Ti-6Al-4V alloy
- (2009) Shuangyin Zhang et al. RARE METALS
- The use of cutting temperature to evaluate the machinability of titanium alloys
- (2008) Masafumi Kikuchi Acta Biomaterialia
- Adhesive joining of aluminium AA6082: The effects of resin and surface treatment
- (2008) C. Borsellino et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Combined reparameterization-based spiral toolpath generation for five-axis sculptured surface machining
- (2008) Fei Ren et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Offset Slices for Multidirection Layered Deposition
- (2008) Prabhjot Singh et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal direct prototyping by using hybrid plasma deposition and milling
- (2008) Xinhong Xiong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preparation and characterization of a new biomedical magnesium–calcium alloy
- (2008) Yizao Wan et al. MATERIALS & DESIGN
- The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding
- (2008) Jicai Feng et al. MATERIALS & DESIGN
- Consistent mesh partitioning and skeletonisation using the shape diameter function
- (2008) Lior Shapira et al. VISUAL COMPUTER
- Effect of welding processes on tensile properties of AA6061 aluminium alloy joints
- (2007) A. K. Lakshminarayanan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Shaped metal deposition of a nickel alloy for aero engine applications
- (2007) D. Clark et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now