Progress in Additive Manufacturing of Energetic Materials: Creating the Reactive Microstructures with High Potential of Applications

Environmentally Friendly Boron-Based Pyrotechnic Delays: An Additive Manufacturing Approach

(2019) Ian Walters et al.   ACS Sustainable Chemistry & Engineering

Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites

(2019) Haiyang Wang et al.   COMBUSTION AND FLAME

Topology Optimization of Solid Rocket Fuel

(2019) Trenton Kirchdoerfer et al.   AIAA JOURNAL

Highly Reactive Metastable Intermixed Composites (MICs): Preparation and Characterization

(2018) Wei He et al.   ADVANCED MATERIALS

Exploring enhanced reactivity of nanosized titanium toward oxidation

(2018) Nikita V. Muravyev et al.   COMBUSTION AND FLAME

Additive Manufacturing of Solid Rocket Propellant Grains

(2018) R. Arun Chandru et al.   JOURNAL OF PROPULSION AND POWER

Additive manufacturing of ammonium perchlorate composite propellant with high solids loadings

(2018) M.S. McClain et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

CL-20 based Explosive Ink of Emulsion Binder System for Direct Ink Writing

(2018) Qianbing Li et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Influence of Stoichiometry on the Thrust and Heat Deposition of On-Chip Nanothermites

(2018) Raghav Ramachandran et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Extrudable Gassy Pyrotechnic Time Delay Compositions

(2018) Johannes Grobler et al.   Central European Journal of Energetic Materials

On the Theoretical Capacity/Energy of Lithium Batteries and Their Counterparts

(2018) Ali Eftekhari   ACS Sustainable Chemistry & Engineering

3D printing multifunctional fluorinated nanocomposites: tuning electroactivity, rheology and chemical reactivity

(2018) Jose A. Bencomo et al.   Journal of Materials Chemistry A

Direct Ink Writing of DNTF Based Composite with High Performance

(2018) Chuanhao Xu et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Preparation and Performance of Pentaerythrite Tetranitrate-Based Composites by Direct Ink Writing

(2018) Chuanhao Xu et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

The Effects of Confinement on the Fracturing Performance of Printed Nanothermites

(2018) Eric R. Westphal et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Development and Characterization of 3D Printable Thermite Component Materials

(2018) Matthew M. Durban et al.   Advanced Materials Technologies

Three dimensional printing of components and functional devices for energy and environmental applications

(2017) J. C. Ruiz-Morales et al.   Energy & Environmental Science

Two-component additive manufacturing of nanothermite structures via reactive inkjet printing

(2017) Allison K. Murray et al.   JOURNAL OF APPLIED PHYSICS

Controlling shockwave dynamics using architecture in periodic porous materials

(2017) Brittany Branch et al.   JOURNAL OF APPLIED PHYSICS

Characterizing the feasibility of processing wet granular materials to improve rheology for 3D printing

(2017) Michael Sweeney et al.   JOURNAL OF MATERIALS SCIENCE

Tailoring burning rates using reactive wires in composite solid rocket propellants

(2017) Sarah Isert et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Preparation and Properties of CL-20 based Composite by Direct Ink Writing

(2017) Jingyu Wang et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission

(2017) Tracie Prater et al.   RAPID PROTOTYPING JOURNAL

Additive Manufacturing: Unlocking the Evolution of Energy Materials

(2017) Adilet Zhakeyev et al.   Advanced Science

Morphological and combustion study of interface effects in aluminum-poly(vinylidene fluoride) composites

(2017) Jena McCollum et al.   MATERIALS & DESIGN

3D processing and characterization of acrylonitrile butadiene styrene (ABS) energetic thin films

(2016) Billy Clark et al.   JOURNAL OF MATERIALS SCIENCE

Survey of Selected Additively Manufactured Propellants for Arc Ignition of Hybrid Rockets

(2016) Stephen A. Whitmore et al.   JOURNAL OF PROPULSION AND POWER

Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging

(2016) Daniel Markl et al.   PHARMACEUTICAL RESEARCH

Direct Deposit Laminate Nanocomposites with Enhanced Propellent Properties

(2015) Xiangyu Li et al.   ACS Applied Materials & Interfaces

Controlling Material Reactivity Using Architecture

(2015) Kyle T. Sullivan et al.   ADVANCED MATERIALS

Electrospray formation and combustion characteristics of iodine-containing Al/CuO nanothermite microparticles

(2015) Haiyang Wang et al.   COMBUSTION AND FLAME

Effects of rheological properties on reactivity of energetic thin films

(2015) Kelsey A. Meeks et al.   COMBUSTION AND FLAME

Nanostructured explosives produced by vapor deposition: Structure and explosive properties

(2015) D. V. Mil’chenko et al.   COMBUSTION EXPLOSION AND SHOCK WAVES

Aluminum/HMX nanocomposites: Synthesis, microstructure, and combustion

(2015) A. N. Zhigach et al.   COMBUSTION EXPLOSION AND SHOCK WAVES

Thermal reaction properties of aluminum/copper (II) oxide/poly(vinylidene fluoride) nanocomposite

(2015) Xiangyu Li et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

The production of monodisperse explosive particles with piezo-electric inkjet printing technology

(2015) M. E. Staymates et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Reactive multilayers fabricated by vapor deposition: A critical review

(2015) D.P. Adams   THIN SOLID FILMS

Development of flexible, free-standing, thin films for additive manufacturing and localized energy generation

(2015) Billy Clark et al.   AIP Advances

Novel Approach to the Preparation of Organic Energetic Film for Microelectromechanical Systems and Microactuator Applications

(2014) Jun Wang et al.   ACS Applied Materials & Interfaces

Nanostructured Energetic Composites: Synthesis, Ignition/Combustion Modeling, and Applications

(2014) Xiang Zhou et al.   ACS Applied Materials & Interfaces

Electrospray Deposition of Energetic Polymer Nanocomposites with High Mass Particle Loadings: A Prelude to 3D Printing of Rocket Motors

(2014) Chuan Huang et al.   ADVANCED ENGINEERING MATERIALS

Exothermic surface chemistry on aluminum particles promoting reactivity

(2014) Oliver Mulamba et al.   APPLIED SURFACE SCIENCE

Electrochemical and electrophoretic deposition of enzymes: Principles, differences and application in miniaturized biosensor and biofuel cell electrodes

(2014) Malika Ammam   BIOSENSORS & BIOELECTRONICS

Assembly and reactive properties of Al/CuO based nanothermite microparticles

(2014) Haiyang Wang et al.   COMBUSTION AND FLAME

Curing Viscosity of HTPB-Based Binder Embedding Micro- and Nano-Aluminum Particles

(2014) Filippo Maggi   PROPELLANTS EXPLOSIVES PYROTECHNICS

Preparation and Characterization of Aqueous Nanothermite Inks for Direct Deposition on SCB Initiators

(2014) R. Ross Nellums et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Effect of Nitrocellulose Gasifying Binder on Thrust Performance and High-g Launch Tolerance of Miniaturized Nanothermite Thrusters

(2014) Clay S. Staley et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Passivated Iodine Pentoxide Oxidizer for Potential Biocidal Nanoenergetic Applications

(2013) Jingyu Feng et al.   ACS Applied Materials & Interfaces

Electrospray Formation of Gelled Nano-Aluminum Microspheres with Superior Reactivity

(2013) Haiyang Wang et al.   ACS Applied Materials & Interfaces

Facile Green In Situ Synthesis of Mg/CuO Core/Shell Nanoenergetic Arrays with a Superior Heat-Release Property and Long-Term Storage Stability

(2013) Xiang Zhou et al.   ACS Applied Materials & Interfaces

Interfacial Chemistry in Al/CuO Reactive Nanomaterial and Its Role in Exothermic Reaction

(2013) Jinhee Kwon et al.   ACS Applied Materials & Interfaces

Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

(2013) Giovanni Cesaretti et al.   ACTA ASTRONAUTICA

Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing

(2013) Yu-Feng Liu et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Neutralizing bacterial spores using halogenated energetic reactions

(2013) Oliver Mulamba et al.   BIOTECHNOLOGY AND BIOPROCESS ENGINEERING

Dense Iodine-Rich Compounds with Low Detonation Pressures as Biocidal Agents

(2013) Chunlin He et al.   CHEMISTRY-A EUROPEAN JOURNAL

Deposition and characterization of energetic thin films

(2013) Kelsey Meeks et al.   COMBUSTION AND FLAME

Thresholds for igniting exothermic reactions in Al/Ni multilayers using pulses of electrical, mechanical, and thermal energy

(2013) Gregory M. Fritz et al.   JOURNAL OF APPLIED PHYSICS

Fast-Impulse Nanothermite Solid-Propellant Miniaturized Thrusters

(2013) Clay S. Staley et al.   JOURNAL OF PROPULSION AND POWER

Effects on the surface structure of organic energetic materials using spin coating

(2013) Xin Zhang et al.   THIN SOLID FILMS

Organic Nanocomposite Structure Tailored by Controlling Droplet Coalescence during Inkjet Printing

(2012) Andrew C. Ihnen et al.   ACS Applied Materials & Interfaces

Integration of nano-Al with Co3O4 nanorods to realize high-exothermic core–shell nanoenergetic materials on a silicon substrate

(2012) Daguo Xu et al.   COMBUSTION AND FLAME

Electrophoretic deposition of binary energetic composites

(2012) Kyle Thomas Sullivan et al.   COMBUSTION AND FLAME

Electrophoretic deposition and mechanistic studies of nano-Al/CuO thermites

(2012) K. T. Sullivan et al.   JOURNAL OF APPLIED PHYSICS

Control of nanoenergetics through organized microstructures

(2012) Venkata Sharat Parimi et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Electrophoretic Deposition of Thermites onto Micro-Engineered Electrodes Prepared by Direct-Ink Writing

(2012) K. T. Sullivan et al.   JOURNAL OF PHYSICAL CHEMISTRY B

Microstructure Evolution during Crystallization of Vapor-Deposited Hexanitroazobenzene Films

(2012) Robert Knepper et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

A novel technique for MEMS packaging: Reactive bonding with integrated material systems

(2012) J. Braeuer et al.   SENSORS AND ACTUATORS A-PHYSICAL

Enhanced reactivity of mechanically-activated nano-scale gasless reactive materials consolidated by coldspray

(2012) A. Bacciochini et al.   SURFACE & COATINGS TECHNOLOGY

Synthesis of one-molecule-thick single-crystalline nanosheets of energetic material for high-sensitive force sensor

(2012) Guangcheng Yang et al.   Scientific Reports

Crystal morphology variation in inkjet-printed organic materials

(2011) Andrew C. Ihnen et al.   APPLIED SURFACE SCIENCE

Reactive sintering: An important component in the combustion of nanocomposite thermites

(2011) K.T. Sullivan et al.   COMBUSTION AND FLAME

Influence of Al/CuO reactive multilayer films additives on exploding foil initiator

(2011) Xiang Zhou et al.   JOURNAL OF APPLIED PHYSICS

Nanoenergetic Gas-Generators: principles and applications

(2011) Karen S. Martirosyan   JOURNAL OF MATERIALS CHEMISTRY

Controlling the microstructure of vapor-deposited pentaerythritol tetranitrate films

(2011) Robert Knepper et al.   JOURNAL OF MATERIALS RESEARCH

Physicochemical characteristics of the components of energetic condensed systems

(2011) Yu. V. Frolov et al.   Russian Journal of Physical Chemistry B

Enthalpy of formation and explosive properties of 5,6-(3,4-furazano)-1,2,3,4-tetrazine-1,3-dioxide

(2011) V. I. Pepekin et al.   Russian Journal of Physical Chemistry B

Formation of Al/CuO bilayer films: Basic mechanisms through density functional theory calculations

(2011) Cloé Lanthony et al.   THIN SOLID FILMS

Application of Inkjet Printing Technology to Produce Test Materials of 1,3,5-Trinitro-1,3,5 Triazcyclohexane for Trace Explosive Analysis

(2010) Eric Windsor et al.   ANALYTICAL CHEMISTRY

Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro

(2010) M. Petrantoni et al.   JOURNAL OF APPLIED PHYSICS

Fabrication and characterization of reactive nanoscale multilayer systems for low-temperature bonding in microsystem technology

(2010) Bianca Boettge et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Combustion of Silicon/Teflon/Viton and Aluminum/Teflon/Viton Energetic Composites

(2010) Cole D. Yarrington et al.   JOURNAL OF PROPULSION AND POWER

Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits

(2010) K. Binder et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

Asymmetric diffusion as a key mechanism in Ni/Al energetic multilayer processing: A first principles study

(2010) M. Petrantoni et al.   JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A

Influence of Particle Size and Mixing Technology on Combustion of HMX/Al Compositions

(2010) Nikita Muravyev et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Engineering the Microstructure of Organic Energetic Materials

(2009) Gengxin Zhang et al.   ACS Applied Materials & Interfaces

Fabrication, assembly and tests of a MEMS-based safe, arm and fire device

(2009) Helene Pezous et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

Characterization of Nanothermite Material for Solid-Fuel Microthruster Applications

(2009) Steven J. Apperson et al.   JOURNAL OF PROPULSION AND POWER

Technology of Foamed Propellants

(2009) Jutta Böhnlein-Mauß et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Electrospraying route to nanotechnology: An overview

(2008) A. Jaworek et al.   JOURNAL OF ELECTROSTATICS

A Nano Initiator Realized by Integrating Al/CuO-Based Nanoenergetic Materials With a Au/Pt/Cr Microheater

(2008) Kaili Zhang et al.   JOURNAL OF MICROELECTROMECHANICAL SYSTEMS

Nanoenergetic Composites of CuO Nanorods, Nanowires, and Al-Nanoparticles

(2008) Rajesh Shende et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

A simple and flexible thin film evaporating device for energetic materials

(2008) Gengxin Zhang et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Exothermic reaction waves in multilayer nanofilms

(2008) A S Rogachev   RUSSIAN CHEMICAL REVIEWS

Inducing dendrite formation using an Atomic Force Microscope tip

(2008) Gengxin Zhang et al.   SCANNING

Dip Pen Nanolithography®: A “Desktop Nanofab™” Approach Using High-Throughput Flexible Nanopatterning

(2008) Jason Haaheim et al.   SCANNING