The effects of nanosilica on the fresh and hardened properties of 3D printable mortars
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
The effects of nanosilica on the fresh and hardened properties of 3D printable mortars
Authors
Keywords
3D printing, Mortar, Nanosilica, Micro-CT, Hydration, Fresh properties, Hardened properties
Journal
CONSTRUCTION AND BUILDING MATERIALS
Volume 281, Issue -, Pages 122574
Publisher
Elsevier BV
Online
2021-02-21
DOI
10.1016/j.conbuildmat.2021.122574
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Continuous strength measurements of cement pastes and concretes by the ultrasonic wave reflection method
- (2020) Didier Lootens et al. CONSTRUCTION AND BUILDING MATERIALS
- The effects of seawater and nanosilica on the performance of blended cements and composites
- (2020) Pawel Sikora et al. Applied Nanoscience
- Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
- (2020) Karol Federowicz et al. Materials
- 3D Concrete Printing for Sustainable Construction
- (2020) Maria Kaszyńska et al. Energies
- Thixotropy of reactive suspensions: The case of cementitious materials
- (2019) O. Ojeda-Farías et al. CONSTRUCTION AND BUILDING MATERIALS
- The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
- (2019) Biranchi Panda et al. Materials
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
- (2019) Oscar A. Mendoza Reales et al. CONSTRUCTION AND BUILDING MATERIALS
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography
- (2019) Hojae Lee et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition
- (2019) Ye Qian et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Pore Structure as a Response to the Freeze/Thaw Resistance of Mortars
- (2019) Ivanka Netinger Grubeša et al. Materials
- Microstructural Characterization of 3D Printed Cementitious Materials
- (2019) Jolien Van Der Putten et al. Materials
- A Review of Industry 4.0 Manufacturing Process Security Risks
- (2019) Jaco Prinsloo et al. Applied Sciences-Basel
- Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
- (2019) Binrong Zhu et al. MATERIALS & DESIGN
- Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials
- (2019) Sang-Yeop Chung et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical characterization of 3D printable concrete
- (2019) A.V. Rahul et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental Investigation of the Macroscopic Behavior and Microstructure Property Evolution of Hardened Cement Consolidated Tailings
- (2019) Xiang Sun et al. Minerals
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall
- (2018) Borja García de Soto et al. AUTOMATION IN CONSTRUCTION
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion
- (2018) Dale P. Bentz et al. CONSTRUCTION AND BUILDING MATERIALS
- Vision of 3D printing with concrete — Technical, economic and environmental potentials
- (2018) Geert De Schutter et al. CEMENT AND CONCRETE RESEARCH
- A study on the limitations of a vane rheometer for mineral suspensions using image processing
- (2017) Alexandre Pierre et al. RHEOLOGICA ACTA
- State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction
- (2017) GuoWei Ma et al. Science China-Technological Sciences
- The Effects of Anisotropic Insulations with Different Spatial Distributions on Material Properties of Mortar Specimens
- (2017) Sang-Yeop Chung et al. International Journal of Concrete Structures and Materials
- A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
- (2017) Guowei Ma et al. Frontiers of Structural and Civil Engineering
- Effects of nano-silica on hydration properties of tricalcium silicate
- (2016) Zhenhai Xu et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography
- (2016) Sang-Yeop Chung et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of the effects of anisotropic pores on material properties of insulating concrete using computed tomography and probabilistic methods
- (2016) Sang-Yeop Chung et al. ENERGY AND BUILDINGS
- Effects of Nanosilica on Compressive Strength and Durability Properties of Concrete with Different Water to Binder Ratios
- (2016) Forood Torabian Isfahani et al. Advances in Materials Science and Engineering
- Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste
- (2015) Nathan Bossa et al. CEMENT AND CONCRETE RESEARCH
- SCC modification by use of amorphous nano-silica
- (2013) G. Quercia et al. CEMENT & CONCRETE COMPOSITES
- Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging
- (2013) Sang-Yeop Chung et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials
- (2012) Deyu Kong et al. CONSTRUCTION AND BUILDING MATERIALS
- The influence of nano-silica on the hydration of ordinary Portland cement
- (2011) G. Land et al. JOURNAL OF MATERIALS SCIENCE
- Effect of nano-silica on rheology and fresh properties of cement pastes and mortars
- (2009) Luciano Senff et al. CONSTRUCTION AND BUILDING MATERIALS
- Porosity and microstructure characterization of building stones and concretes
- (2008) V. Cnudde et al. ENGINEERING GEOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started