3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties

Influences of Printing Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete

(2021) Luong Pham et al.   3D Printing and Additive Manufacturing

Optimum Mix Design for 3D Concrete Printing Using Mining Tailings: A Case Study in Spain

(2021) Martina-Inmaculada Álvarez-Fernández et al.   Sustainability

The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review

(2021) Pawel Sikora et al.   Applied Nanoscience

Fiber orientation effects on ultra-high performance concrete formed by 3D printing

(2021) Arun R. Arunothayan et al.   CEMENT AND CONCRETE RESEARCH

The effects of nanosilica on the fresh and hardened properties of 3D printable mortars

(2021) Pawel Sikora et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials

(2021) Mehdi Chougan et al.   MATERIALS & DESIGN

Thermal performance of building envelopes with structural layers of the same density: Lightweight aggregate concrete versus foamed concrete

(2021) Jarosław Strzałkowski et al.   BUILDING AND ENVIRONMENT

Mechanical behaviors of 3D printed lightweight concrete structure with hollow section

(2020) Li Wang et al.   Archives of Civil and Mechanical Engineering

Evaluating the printability of concretes containing lightweight coarse aggregates

(2020) A.V. Rahul et al.   CEMENT & CONCRETE COMPOSITES

Lightweight Concrete—From Basics to Innovations

(2020) Karl-Christian Thienel et al.   Materials

The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites

(2020) Mehdi Chougan et al.   CONSTRUCTION AND BUILDING MATERIALS

Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries

(2020) Michael Haist et al.   MATERIALS AND STRUCTURES

Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete

(2020) Karol Federowicz et al.   Materials

Static mechanical properties and mechanism of C200 ultra-high performance concrete (UHPC) containing coarse aggregates

(2020) Lv Yujing et al.   SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS

Hardened properties of layered 3D printed concrete with recycled sand

(2020) Tao Ding et al.   CEMENT & CONCRETE COMPOSITES

High performance cementitious nanocomposites: The effectiveness of nano-Graphite (nG)

(2020) Mehdi Chougan et al.   CONSTRUCTION AND BUILDING MATERIALS

Flow assessment and development towards sustainable self-consolidating concrete using blended basalt and limestone-cement systems

(2020) Dima Youness et al.   JOURNAL OF CLEANER PRODUCTION

3D Concrete Printing for Sustainable Construction

(2020) Maria Kaszyńska et al.   Energies

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

(2019) Guan Heng Andrew Ting et al.   Journal of Material Cycles and Waste Management

Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders

(2019) Hussam Alghamdi et al.   MATERIALS & DESIGN

Material Design and Performance Evaluation of Foam Concrete for Digital Fabrication

(2019) Markin et al.   Materials

Printability region for 3D concrete printing using slump and slump flow test

(2019) Yi Wei Daniel Tay et al.   COMPOSITES PART B-ENGINEERING

A systematic study on EN-998-2 premixed mortars modified with graphene-based materials

(2019) Mehdi Chougan et al.   CONSTRUCTION AND BUILDING MATERIALS

Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume

(2019) Rakesh Choudhary et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of recycled waste glass sand as partial replacement of sand in concrete

(2019) Nafisa Tamanna et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparative study of the mechanical and thermal properties of lightweight cementitious composites

(2018) Adam L. Brooks et al.   CONSTRUCTION AND BUILDING MATERIALS

Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

(2018) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical characterization of 3D printed anisotropic cementitious material by the electromechanical transducer

(2018) Guowei Ma et al.   Smart Materials and Structures

Can We Truly Predict the Compressive Strength of Concrete without Knowing the Properties of Aggregates?

(2018) Jorge de Brito et al.   Applied Sciences-Basel

Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids

(2018) Guowei Ma et al.   CEMENT & CONCRETE COMPOSITES

Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials

(2018) Mingxu Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Commentary: 3D printing set to transform the construction industry

(2018) Seyed Ghaffar et al.   PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

(2018) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes

(2017) Zhijun Tan et al.   MATERIALS AND STRUCTURES

Utilization of waste glass in translucent and photocatalytic concrete

(2016) P. Spiesz et al.   CONSTRUCTION AND BUILDING MATERIALS

Reuse of recycled glass in mortar manufacturing

(2016) Valeria Corinaldesi et al.   European Journal of Environmental and Civil Engineering

An investigation of rheological properties of cement-based grout mixed with rice husk ash (RHA)

(2015) Fatih Celik et al.   CONSTRUCTION AND BUILDING MATERIALS

Rheological models for fresh cement asphalt paste

(2014) Jianwei Peng et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates

(2014) Ali Mardani-Aghabaglou et al.   MATERIALS AND STRUCTURES

Fresh and Hardened Properties of Concrete Incorporating Recycled Glass as 100% Sand Replacement

(2013) Jared R. Wright et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Hardened properties of high-performance printing concrete

(2012) T.T. Le et al.   CEMENT AND CONCRETE RESEARCH

Investigation into the thermal performance of recycled glass screed for construction purposes

(2011) A. Alani et al.   CONSTRUCTION AND BUILDING MATERIALS

Strength and toughness improvement of cement binders using expandable thermoplastic microspheres

(2009) H. Aglan et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilizing Waste Recycled Glass as Sand/Cement Replacement in Concrete

(2009) Bashar Taha et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Influence of the shape and roughness of inclusions on the rheological properties of a cementitious suspension

(2008) S.T. Erdoğan et al.   CEMENT & CONCRETE COMPOSITES

Recycling of waste glass as a partial replacement for fine aggregate in concrete

(2008) Zainab Z. Ismail et al.   WASTE MANAGEMENT