Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography

Evaluating the printability of concretes containing lightweight coarse aggregates

(2020) A.V. Rahul et al.   CEMENT & CONCRETE COMPOSITES

Using X-ray computed tomography to investigate mortar subjected to freeze-thaw cycles

(2020) Ghazal Sokhansefat et al.   CEMENT & CONCRETE COMPOSITES

Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions

(2020) Zhijian Li et al.   COMPOSITES PART B-ENGINEERING

Analysis of air voids in cementitious materials using micro X-ray computed tomography (µXCT)

(2020) A. Koenig   CONSTRUCTION AND BUILDING MATERIALS

Comparison of the pore size distributions of concretes with different air-entraining admixture dosages using 2D and 3D imaging approaches

(2020) Sang-Yeop Chung et al.   MATERIALS CHARACTERIZATION

Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

(2020) Yu Chen et al.   CEMENT & CONCRETE COMPOSITES

Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture

(2020) Yu Chen et al.   CEMENT AND CONCRETE RESEARCH

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

(2019) R.J.M. Wolfs et al.   CEMENT AND CONCRETE RESEARCH

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

(2019) Biranchi Panda et al.   COMPOSITES PART B-ENGINEERING

Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing

(2019) Venkatesh Naidu Nerella et al.   CONSTRUCTION AND BUILDING MATERIALS

The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing

(2019) Yu Chen et al.   Materials

Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development

(2019) Chen et al.   Applied Sciences-Basel

Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure

(2019) Stefan Chaves Figueiredo et al.   CONSTRUCTION AND BUILDING MATERIALS

The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

(2019) Biranchi Panda et al.   Materials

Printability region for 3D concrete printing using slump and slump flow test

(2019) Yi Wei Daniel Tay et al.   COMPOSITES PART B-ENGINEERING

Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography

(2019) Hojae Lee et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructural Characterization of 3D Printed Cementitious Materials

(2019) Jolien Van Der Putten et al.   Materials

3D printing using concrete extrusion: A roadmap for research

(2018) R.A. Buswell et al.   CEMENT AND CONCRETE RESEARCH

Rheological requirements for printable concretes

(2018) Nicolas Roussel   CEMENT AND CONCRETE RESEARCH

Vision of 3D printing with concrete — Technical, economic and environmental potentials

(2018) Geert De Schutter et al.   CEMENT AND CONCRETE RESEARCH

A review of X-ray computed tomography of concrete and asphalt construction materials

(2018) Anton du Plessis et al.   CONSTRUCTION AND BUILDING MATERIALS

Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: The influences of silica fume and air-entraining agent

(2016) Pangil Choi et al.   CEMENT & CONCRETE COMPOSITES

Revealing the Dark Side of Portlandite Clusters in Cement Paste by Circular Polarization Microscopy

(2016) Oğuzhan Çopuroğlu   Materials

Pore structure of mortars with cellulose ether additions – Study of the air-void structure

(2015) Mateusz Wyrzykowski et al.   CEMENT & CONCRETE COMPOSITES

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

(2015) A. Perrot et al.   MATERIALS AND STRUCTURES

Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography

(2012) Kwang Yeom Kim et al.   CONSTRUCTION AND BUILDING MATERIALS

Quantifying the distribution of paste-void spacing of hardened cement paste using X-ray computed tomography

(2012) Tae Sup Yun et al.   MATERIALS CHARACTERIZATION

Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (μCT) image

(2011) Mingzhong Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Methods for threshold optimization for images collected from contrast enhanced concrete surfaces for air-void system characterization

(2008) Karl Peterson et al.   MATERIALS CHARACTERIZATION