Methods and materials for additive manufacturing: A critical review on advancements and challenges
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Authors
Keywords
Additive manufacturing, 3D printing, Composites, Bioprinting, Rapid prototyping, Thin-walled structures
Journal
THIN-WALLED STRUCTURES
Volume 159, Issue -, Pages 107228
Publisher
Elsevier BV
Online
2020-10-31
DOI
10.1016/j.tws.2020.107228
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- The potential of SLM technology for processing magnesium alloys in aerospace industry
- (2020) T. Kurzynowski et al. Archives of Civil and Mechanical Engineering
- 3D printing of ceramics and graphene circuits-on-ceramics by thermal bubble inkjet technology and high temperature sintering
- (2020) Zheguan Huang et al. CERAMICS INTERNATIONAL
- Effect of encapsulated hot isostatic pressing on properties of Ti6Al4V deposits produced by cold spray
- (2020) P. Petrovskiy et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nanoscale 3D Bioprinting for Osseous Tissue Manufacturing
- (2020) Yujia Wang et al. International Journal of Nanomedicine
- Printing (Mn,Fe)2(P,Si) magnetocaloric alloys for magnetic refrigeration applications
- (2020) Xuefei Miao et al. JOURNAL OF MATERIALS SCIENCE
- Effect of the oxygen content of pure copper powder on selective electron beam melting
- (2020) Ralf Guschlbauer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle
- (2020) Mateusz Galeja et al. Materials
- Fracture Resistance Analysis of 3D-Printed Polymers
- (2020) Ali Zolfagharian et al. Polymers
- Increasing Damping of Thin-Walled Structures Using Additively Manufactured Vibration Eliminators
- (2020) Paweł Dunaj et al. Materials
- On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review
- (2020) Peirong Zhang et al. Journal of Manufacturing Processes
- A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V
- (2020) Mostafa Yakout et al. Journal of Manufacturing Processes
- Recent developments in polymers/polymer nanocomposites for additive manufacturing
- (2020) H. Wu et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
- (2020) Shun-Xing Liang et al. Applied Materials Today
- Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
- (2020) Niloofar Sanaei et al. PROGRESS IN MATERIALS SCIENCE
- Inconel 625/TiB2 Metal Matrix Composites by Direct Laser Deposition
- (2019) Vladimir Promakhov et al. Metals
- Ultrasonic additive manufacturing of bulk Ni-based metallic glass
- (2019) Wenzheng Wu et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Yttria stabilized zirconia (YSZ) thin wall structures fabricated using laser engineered net shaping (LENS)
- (2019) Zhiqi Fan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
- (2019) G. D. Goh et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Additive Manufacturing of Mechanically Isotropic Thin Films and Membranes via Microextrusion 3D Printing of Polymer Solutions
- (2019) Manjot Singh et al. ACS Applied Materials & Interfaces
- Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites
- (2019) Bey Vrancken et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
- (2019) Dongdong Gu et al. COMPOSITES PART B-ENGINEERING
- Nanocomposites of PLA containing ZnO nanofibers made by solvent cast 3D printing: Production and characterization
- (2019) R.C. Nonato et al. EUROPEAN POLYMER JOURNAL
- Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace
- (2019) Zhixin Zhan et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Additive manufacturing of SiSiC by layerwise slurry deposition and binder jetting (LSD-print)
- (2019) Andrea Zocca et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon Polymerization
- (2019) Lei Zheng et al. Nanoscale Research Letters
- Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
- (2019) Holly D. Carlton et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy
- (2019) T. Yang et al. SCRIPTA MATERIALIA
- Current Biomedical Applications of 3D Printing and Additive Manufacturing
- (2019) Pouyan Ahangar et al. Applied Sciences-Basel
- The Adoption of Three-Dimensional Additive Manufacturing from Biomedical Material Design to 3D Organ Printing
- (2019) Ajay Vikram Singh et al. Applied Sciences-Basel
- Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts
- (2019) Rong Li et al. Journal of Manufacturing Processes
- Why manufacturers adopt additive manufacturing technologies: The role of sustainability
- (2019) Mojtaba Khorram Niaki et al. JOURNAL OF CLEANER PRODUCTION
- Effect of remelting on microstructure and magnetic properties of Fe-Co-based alloys produced by laser additive manufacturing
- (2019) Xiaoshan Yang et al. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
- Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition
- (2019) C.L. Wu et al. OPTICS AND LASER TECHNOLOGY
- 3D bioprinting of collagen to rebuild components of the human heart
- (2019) A. Lee et al. SCIENCE
- Additive Manufacturing of Precision Biomaterials
- (2019) Elia A. Guzzi et al. ADVANCED MATERIALS
- 3D printed antibacterial silver nanowire/polylactide nanocomposites
- (2019) Ipek Bayraktar et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
- (2019) J.M. Chacón et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Recent advancements in additive manufacturing technologies for porous material applications
- (2019) Subhash Guddati et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Rapid fabrication of TiN/AISI 420 stainless steel composite by selective laser melting additive manufacturing
- (2019) X. Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
- (2019) C. Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of thermal properties on residual stresses in SLM of aerospace alloys
- (2019) Mostafa Yakout et al. RAPID PROTOTYPING JOURNAL
- Densification, Microstructure and Properties of 90W-7Ni-3Fe Fabricated by Selective Laser Melting
- (2019) Junfeng Li et al. Metals
- Experimental investigation of phase change materials fabricated using selective laser sintering additive manufacturing
- (2019) Malek Nofal et al. Journal of Manufacturing Processes
- Residual stress analysis of thin AlSi10Mg parts produced by Laser Powder Bed Fusion
- (2019) Alessandro Salmi et al. Virtual and Physical Prototyping
- Electrohydrodynamic printing of sub-microscale fibrous architectures with improved cell adhesion capacity
- (2019) Bing Zhang et al. Virtual and Physical Prototyping
- Comparison of carbon-based reinforcement on laser aided additive manufacturing Inconel 625 composites
- (2019) Baicheng Zhang et al. APPLIED SURFACE SCIENCE
- 3D printed fiber reinforced polymer composites - Structural analysis
- (2019) M. Mohammadizadeh et al. COMPOSITES PART B-ENGINEERING
- Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder
- (2019) Xinliang Xie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Possibilities of Manufacturing Products from Cermet Compositions Using Nanoscale Powders by Additive Manufacturing Methods
- (2019) Sergei Grigoriev et al. Materials
- Effect of the process parameters in the additive manufacturing of in situ Al/AlN samples
- (2019) A. Riquelme et al. Journal of Manufacturing Processes
- Particle size influence on material properties of BaTiO3 ceramics fabricated using freeze-form extrusion 3D printing
- (2019) Anabel Renteria et al. Materials Research Express
- Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography
- (2019) Se Yeon Song et al. MATERIALS & DESIGN
- Bio-tribological response of duplex surface engineered SS316L for hip-implant application
- (2019) Aniruddha Samanta et al. APPLIED SURFACE SCIENCE
- Ignition and combustion analysis of direct write fabricated aluminum/metal oxide/PVDF films
- (2019) Miles C. Rehwoldt et al. COMBUSTION AND FLAME
- Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials
- (2019) Lourdes D. Bobbio et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of flexible composite drug films via foldable linkages using electrohydrodynamic printing
- (2019) Shuting Wu et al. Materials Science & Engineering C-Materials for Biological Applications
- Analytical modeling of post-printing grain size in metal additive manufacturing
- (2019) Xia Ji et al. OPTICS AND LASERS IN ENGINEERING
- Direct metal laser sintered (DMLS) process to develop Inconel 718 alloy for turbine engine components
- (2019) B. Anush Raj et al. OPTIK
- Towards V-based high-entropy alloys for nuclear fusion applications
- (2019) P.J. Barron et al. SCRIPTA MATERIALIA
- Understanding on toughening mechanism of bioinspired bulk metallic glassy composites by thermal spray additive manufacturing
- (2019) Cheng Zhang et al. SCRIPTA MATERIALIA
- Processability of Atypical WC-Co Composite Feedstock by Laser Powder-Bed Fusion
- (2019) Mohaimen Al-Thamir et al. Materials
- Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content
- (2019) A Yu Churyumov et al. Materials Research Express
- Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview
- (2019) L.E. Murr Journal of Materials Research and Technology-JMR&T
- Sintering regimes and resulting microstructure and properties of binder jet 3D printed Ni-Mn-Ga magnetic shape memory alloys
- (2018) Amir Mostafaei et al. ACTA MATERIALIA
- Novel Materials for 3D Printing by Photopolymerization
- (2018) Michael Layani et al. ADVANCED MATERIALS
- Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer
- (2018) Naga B. Gundrati et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- Properties of as-deposited and heat-treated Ni-Mn-Ga magnetic shape memory alloy processed by directed energy deposition
- (2018) Jakub Toman et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of anisotropic hybrid NdFeB-SmFeN nylon composite bonded magnets
- (2018) Kinjal Gandha et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Investigation of Solidification and Segregation Characteristics of Cast Ni-Base Superalloy K417G
- (2018) Li Gong et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Hot deformation behavior of an antibacterial Co–29Cr–6Mo–1.8Cu alloy and its effect on mechanical property and corrosion resistance
- (2018) Erlin Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fire reaction properties of polystyrene-based nanocomposites using nanosilica and nanoclay as additives in cone calorimeter test
- (2018) Lubna Ahmed et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets
- (2018) M. Garibaldi et al. MATERIALS CHARACTERIZATION
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
- (2018) Tomasz Kurzynowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved development procedure to enhance the stability of microstructures created by two-photon polymerization
- (2018) Julia Purtov et al. MICROELECTRONIC ENGINEERING
- Micro laser metal wire deposition for additive manufacturing of thin-walled structures
- (2018) Ali Gökhan Demir OPTICS AND LASERS IN ENGINEERING
- Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organisation
- (2018) M. Bhuvanesh Kumar et al. PRODUCTION PLANNING & CONTROL
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Integrated product-process design: Material and manufacturing process selection for additive manufacturing using multi-criteria decision making
- (2018) Uzair Khaleeq uz Zaman et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP
- (2018) Laizhen Jin et al. CERAMICS INTERNATIONAL
- Progress in Additive Manufacturing on New Materials
- (2018) Neng Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Synchronous improvement of the strength and plasticity of Ni-Co based superalloys
- (2018) C.L. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior
- (2018) Chao Cai et al. POWDER TECHNOLOGY
- Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
- (2018) Bandar AlMangour et al. COMPOSITES PART B-ENGINEERING
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanical properties of Zr-based bulk metallic glass parts fabricated by laser-foil-printing additive manufacturing
- (2018) Yingqi Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Polymeric composites for powder-based additive manufacturing: Materials and applications
- (2018) Shangqin Yuan et al. PROGRESS IN POLYMER SCIENCE
- Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: Bridging degree of cure with tensile strength and hardness
- (2018) Yiran Yang et al. MATERIALS & DESIGN
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties
- (2018) Xiaoli Wen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of NdFeB bonded magnets with SrFe12O19 addition
- (2018) Fang Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High strain rate response of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy fabricated by laser additive manufacturing
- (2018) Xiao Zong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
- (2018) Mostafa Yakout et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the characterization of stainless steel 316L parts produced by selective laser melting
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The selection of process parameters in additive manufacturing for aerospace alloys
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In vivo diabetic wound healing with nanofibrous scaffolds modified with gentamicin and recombinant human epidermal growth factor
- (2017) Charu Dwivedi et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication
- (2017) Ling Li et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Laser processing of bulk metallic glass: A review
- (2017) E. Williams et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of Solution Annealing on Microstructure and Mechanical Properties of a Ni-Cr-W-Fe Alloy
- (2017) Meiqiong Ou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Segregation of Phosphorus and Precipitation of MNP-Type Phosphide at the Grain Boundary of IN706 Superalloy
- (2017) Sha Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Influence of building orientation on the flexural strength of laminated object manufacturing specimens
- (2017) D. Olivier et al. Journal of Mechanical Science and Technology
- Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications
- (2017) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- 3D printing of open-porous cellular ceramics with high specific strength
- (2017) Johannes Maurath et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
- (2017) David C. Ackland et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process
- (2017) Omar Ahmed Mohamed et al. MATERIALS LETTERS
- Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
- (2017) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructure on the fatigue crack growth behavior of laser solid formed 300M steel
- (2017) Fenggang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of energy density on metallurgy and properties in metal additive manufacturing
- (2017) Shahir M. Yusuf et al. MATERIALS SCIENCE AND TECHNOLOGY
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Laser polishing of additive manufactured Ti alloys
- (2017) C.P. Ma et al. OPTICS AND LASERS IN ENGINEERING
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene
- (2017) Vinay Deep Punetha et al. PROGRESS IN POLYMER SCIENCE
- Microscale Electro-Hydrodynamic Cell Printing with High Viability
- (2017) Jiankang He et al. Small
- Ferrite-based soft and hard magnetic structures by extrusion free-forming
- (2017) Erwin Peng et al. RSC Advances
- Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
- (2017) Batzaya Byambaa et al. Advanced Healthcare Materials
- Lasers in additive manufacturing: A review
- (2017) Hyub Lee et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Laser additive processing of Fe-Si-B-Cu-Nb magnetic alloys
- (2017) R. Conteri et al. Journal of Manufacturing Processes
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Thin-walled high temperature alloy structures fabricated from additively manufactured polymer templates
- (2017) John H. Martin et al. MATERIALS & DESIGN
- Additive manufacturing of cardiovascular CoCr stents by selective laser melting
- (2017) Ali Gökhan Demir et al. MATERIALS & DESIGN
- 3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration
- (2016) Sha Huang et al. Acta Biomaterialia
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
- (2016) John W. Halloran Annual Review of Materials Research
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Microstructure and mechanical properties of porous alumina ceramic prepared by a combination of 3–D printing and sintering
- (2016) Xiangming Li et al. CERAMICS INTERNATIONAL
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Effect of nanoparticles on the mechanical properties of acrylonitrile-butadiene-styrene specimens fabricated by fused deposition modeling
- (2016) Shuna Meng et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components
- (2016) Runze Huang et al. JOURNAL OF CLEANER PRODUCTION
- Selective laser melting of boron carbide particles coated by a cobalt-based metal layer
- (2016) A. Davydova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
- (2016) Qiang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
- (2016) G. Miranda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain hardening of Titanium alloy Ti6Al4V sheets with prior heat treatment and cold working
- (2016) R.K. Gupta et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
- (2016) M. Qian et al. MRS BULLETIN
- Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
- (2016) Bing Zhang et al. Nanoscale
- Multiscale metallic metamaterials
- (2016) Xiaoyu Zheng et al. NATURE MATERIALS
- Biomedical titanium alloys and their additive manufacturing
- (2016) Yu-Lin Hao et al. RARE METALS
- A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing
- (2016) Charlotte de Formanoir et al. Materials Research Letters
- The purification of AISI 420 stainless steel in laser solid forming
- (2016) Menghua Song et al. MATERIALS & DESIGN
- Effect of environmental oxygen content on the oxide inclusion in laser solid formed AISI 420 stainless steel
- (2016) Menghua Song et al. MATERIALS & DESIGN
- Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets
- (2016) Ling Li et al. Scientific Reports
- The Roadmap for Additive Manufacturing and Its Impact
- (2016) David L. Bourell et al. 3D Printing and Additive Manufacturing
- Challenges and Opportunities in Design for Additive Manufacturing
- (2016) Carolyn Conner Seepersad 3D Printing and Additive Manufacturing
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Interfacial shear strength estimates of NiTi–Al matrix composites fabricated via ultrasonic additive manufacturing
- (2015) Adam Hehr et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component
- (2015) Huang Chunping et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping
- (2015) I. Kunce et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural control during direct laser deposition of a β-titanium alloy
- (2015) Chunlei Qiu et al. MATERIALS & DESIGN
- The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2015) Yanyan Zhu et al. MATERIALS & DESIGN
- Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys
- (2015) S. Ehtemam Haghighi et al. MATERIALS & DESIGN
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
- (2015) Zhenzhen Quan et al. Materials Today
- High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes
- (2015) Bong Hoon Kim et al. NANO LETTERS
- Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
- (2015) Attilio Marino et al. Nanoscale
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
- (2015) D. Choudhuri et al. SCRIPTA MATERIALIA
- 3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
- (2015) Fu-Yu Hsieh et al. Organogenesis
- Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys
- (2015) R. Liu et al. Scientific Reports
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Additive Manufacture of Ceramics Components by Inkjet Printing
- (2015) Brian Derby Engineering
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles
- (2015) Eric Wycisk et al. Frontiers in Materials
- Recent advances on the development of magnesium alloys for biodegradable implants
- (2014) Yongjun Chen et al. Acta Biomaterialia
- Additive Manufacturing of Ceramic-Based Materials
- (2014) Nahum Travitzky et al. ADVANCED ENGINEERING MATERIALS
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting
- (2014) Vincent Wagner et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS)
- (2014) I. Kunce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
- (2014) Seyeon Hwang et al. JOURNAL OF ELECTRONIC MATERIALS
- Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced via Electron Beam Freeform Fabrication
- (2014) Wesley A. Tayon et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Power prediction for laser engineered net shaping of Al2O3 ceramic parts
- (2014) Fangyong Niu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
- (2014) X.P. Li et al. MATERIALS & DESIGN
- Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
- (2014) Salman Pervaiz et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact
- (2014) Solomon Boakye Yiadom et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy
- (2014) Kaiwen Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties
- (2014) X.P. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing
- (2014) J. Gockel et al. MATERIALS SCIENCE AND TECHNOLOGY
- Options for additive rapid prototyping methods (3D printing) in MEMS technology
- (2014) Victor A. Lifton et al. RAPID PROTOTYPING JOURNAL
- The Programmable World
- (2014) Thomas A. Campbell et al. SCIENTIFIC AMERICAN
- Dip-Coated Gold Nanoparticle Electrodes for Aqueous-Solution-Processed Large-Area Solar Cells
- (2014) Xiaohang Du et al. Advanced Energy Materials
- Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
- (2014) Douglas C. Hofmann et al. Scientific Reports
- High-Entropy Alloys: A Critical Review
- (2014) Ming-Hung Tsai et al. Materials Research Letters
- Zinc in calcium phosphate mediates bone induction: In vitro and in vivo model
- (2013) Xiaoman Luo et al. Acta Biomaterialia
- Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells
- (2013) B. Duan et al. Acta Biomaterialia
- NiTi–Al interface strength in ultrasonic additive manufacturing composites
- (2013) Ryan Hahnlen et al. COMPOSITES PART B-ENGINEERING
- Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
- (2013) I. Kunce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Selective laser melting of La(Fe,Co,Si)13 geometries for magnetic refrigeration
- (2013) J. D. Moore et al. JOURNAL OF APPLIED PHYSICS
- Fabrication of three-dimensional porous scaffolds with controlled filament orientation and large pore size via an improved E-jetting technique
- (2013) Jin Lan Li et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Processing metallic glasses by selective laser melting
- (2013) Simon Pauly et al. Materials Today
- Electrohydrodynamic direct-writing
- (2013) YongAn Huang et al. Nanoscale
- Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
- (2013) Jan Wilkes et al. RAPID PROTOTYPING JOURNAL
- Fabrication of Biomedical Implants using Laser Engineered Net Shaping (LENS™)
- (2013) Mitun Das et al. Transactions of the Indian Ceramic Society
- Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl
- (2013) Brian A. Welk et al. ULTRAMICROSCOPY
- Adding Value in Additive Manufacturing : Researchers in the United Kingdom and Europe Look to 3D Printing for Customization
- (2013) Jim Banks IEEE Pulse
- Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- In vitro corrosion behavior and in vivo biodegradation of biomedical β-Ca3(PO4)2/Mg–Zn composites
- (2012) Kun Yu et al. Acta Biomaterialia
- Fabrication of porous titanium implants by three-dimensional printing and sintering at different temperatures
- (2012) Yaoyang XIONG et al. DENTAL MATERIALS JOURNAL
- A review on 3D micro-additive manufacturing technologies
- (2012) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- 3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
- (2012) Bin Duan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive manufacturing techniques for the production of tissue engineering constructs
- (2012) Carlos Mota et al. Journal of Tissue Engineering and Regenerative Medicine
- Elevated temperature characterization of electron beam freeform fabricated Ti–6Al–4V and dispersion strengthened Ti–8Al–1Er
- (2012) R.W. Bush et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
- (2012) Xin Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing
- (2012) B Verlee et al. POWDER METALLURGY
- Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu–Zn alloy processed by equal-channel angular pressing
- (2012) Z.J. Zhang et al. SCRIPTA MATERIALIA
- Toward engineering functional organ modules by additive manufacturing
- (2012) Francoise Marga et al. Biofabrication
- Bioprinting of growth factors onto aligned sub-micron fibrous scaffolds for simultaneous control of cell differentiation and alignment
- (2011) Elmer D.F. Ker et al. BIOMATERIALS
- Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
- (2011) Ralf Gaebel et al. BIOMATERIALS
- Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
- (2011) Roberto Gaetani et al. BIOMATERIALS
- Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
- (2011) E. Yasa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser solid forming Zr-based bulk metallic glass
- (2011) Gaolin Yang et al. INTERMETALLICS
- Improvement of cyclic durability of Ti–Cr–V alloy by Fe substitution
- (2011) Masakazu Aoki et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology
- (2011) Baicheng Zhang et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Quantification of surface roughness of parts processed by laminated object manufacturing
- (2011) Daekeon Ahn et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High-Temperature Oxidation Behavior of a Ni-Cr-W-Al Alloy
- (2011) Y.C. Ma et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions
- (2011) Yoram de Hazan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying
- (2011) S. González et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys
- (2011) Hamid Reza Bakhsheshi Rad et al. MATERIALS & DESIGN
- Metallic glasses from “alchemy” to pure science: Present and future of design, processing and applications of glassy metals
- (2011) Eugen Axinte MATERIALS & DESIGN
- Effect of Solution Temperature on the Microstructure and Mechanical Properties of a Newly Developed Superalloy TMW-4M3
- (2011) Zhihong Zhong et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser sintering of polyamides and other polymers
- (2011) R.D. Goodridge et al. PROGRESS IN MATERIALS SCIENCE
- In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review
- (2010) Y. Xin et al. Acta Biomaterialia
- Three-Dimensional Nanostructures for Photonics
- (2010) Georg von Freymann et al. ADVANCED FUNCTIONAL MATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
- (2010) J. N. Li et al. JOURNAL OF MATERIALS SCIENCE
- Regeneration of the articular surface of the rabbit synovial joint by cell homing: a proof of concept study
- (2010) Chang H Lee et al. LANCET
- Laser processing of Fe-based bulk amorphous alloy
- (2010) Vamsi Krishna Balla et al. SURFACE & COATINGS TECHNOLOGY
- Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP)
- (2010) P K Wu et al. Biofabrication
- 3D Powder Printing of β-Tricalcium Phosphate Ceramics Using Different Strategies
- (2009) E. Vorndran et al. ADVANCED ENGINEERING MATERIALS
- Processing of Bulk Metallic Glass
- (2009) Jan Schroers ADVANCED MATERIALS
- Human microvasculature fabrication using thermal inkjet printing technology
- (2009) Xiaofeng Cui et al. BIOMATERIALS
- Scaffold-free vascular tissue engineering using bioprinting
- (2009) Cyrille Norotte et al. BIOMATERIALS
- Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
- (2009) S. Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Direct Inkjet Printing of Dental Prostheses Made of Zirconia
- (2009) J. Ebert et al. JOURNAL OF DENTAL RESEARCH
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Smart structure sensors based on embedded fibre Bragg grating arrays in aluminium alloy matrix by ultrasonic consolidation
- (2009) Chengbo Mou et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Micro-injection moulding of polymer microfluidic devices
- (2009) Usama M. Attia et al. Microfluidics and Nanofluidics
- Stereolithography fabrication and characterization of syntactic foams containing hollow glass microspheres
- (2009) T Roques-Carmes et al. RUSSIAN CHEMICAL REVIEWS
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication
- (2008) Wonhye Lee et al. BIOMATERIALS
- Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
- (2008) Vamsi Krishna Balla et al. International Journal of Applied Ceramic Technology
- Slurry deposition by airbrush for selective laser sintering of ceramic components
- (2008) Anja M. Waetjen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Bond strength development between concretes of different ages
- (2008) H. Beushausen et al. MAGAZINE OF CONCRETE RESEARCH
- Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
- (2008) M. Turker et al. MATERIALS CHARACTERIZATION
- Early effect of Ti–24Nb–4Zr–7.9Sn intramedullary nails on fractured bone
- (2008) Z. Guo et al. Materials Science & Engineering C-Materials for Biological Applications
- Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
- (2008) Karoly Jakab et al. TISSUE ENGINEERING PART A
- Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing
- (2008) Natalja E. Fedorovich et al. Tissue engineering. Part A
- Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
- (2007) Rachel E. Saunders et al. BIOMATERIALS
- Structure and hardness of surface of Al18B4O33w/Al composite by laser surface melting
- (2007) J. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle- and Bone-Like Subpopulations
- (2007) Julie A. Phillippi et al. STEM CELLS
- Synthesis, phase transformation, and hydrogen storage properties of ball-milled TiV0.9Mn1.1
- (2006) J. Huot et al. JOURNAL OF ALLOYS AND COMPOUNDS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started