Methods and materials for additive manufacturing: A critical review on advancements and challenges
出版年份 2020 全文链接
标题
Methods and materials for additive manufacturing: A critical review on advancements and challenges
作者
关键词
Additive manufacturing, 3D printing, Composites, Bioprinting, Rapid prototyping, Thin-walled structures
出版物
THIN-WALLED STRUCTURES
Volume 159, Issue -, Pages 107228
出版商
Elsevier BV
发表日期
2020-10-31
DOI
10.1016/j.tws.2020.107228
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- The potential of SLM technology for processing magnesium alloys in aerospace industry
- (2020) T. Kurzynowski et al. Archives of Civil and Mechanical Engineering
- 3D printing of ceramics and graphene circuits-on-ceramics by thermal bubble inkjet technology and high temperature sintering
- (2020) Zheguan Huang et al. CERAMICS INTERNATIONAL
- Effect of encapsulated hot isostatic pressing on properties of Ti6Al4V deposits produced by cold spray
- (2020) P. Petrovskiy et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Nanoscale 3D Bioprinting for Osseous Tissue Manufacturing
- (2020) Yujia Wang et al. International Journal of Nanomedicine
- Printing (Mn,Fe)2(P,Si) magnetocaloric alloys for magnetic refrigeration applications
- (2020) Xuefei Miao et al. JOURNAL OF MATERIALS SCIENCE
- Effect of the oxygen content of pure copper powder on selective electron beam melting
- (2020) Ralf Guschlbauer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle
- (2020) Mateusz Galeja et al. Materials
- Fracture Resistance Analysis of 3D-Printed Polymers
- (2020) Ali Zolfagharian et al. Polymers
- Increasing Damping of Thin-Walled Structures Using Additively Manufactured Vibration Eliminators
- (2020) Paweł Dunaj et al. Materials
- On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review
- (2020) Peirong Zhang et al. Journal of Manufacturing Processes
- A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V
- (2020) Mostafa Yakout et al. Journal of Manufacturing Processes
- Recent developments in polymers/polymer nanocomposites for additive manufacturing
- (2020) H. Wu et al. PROGRESS IN MATERIALS SCIENCE
- Selective laser melting manufactured porous Fe-based metallic glass matrix composite with remarkable catalytic activity and reusability
- (2020) Shun-Xing Liang et al. Applied Materials Today
- Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
- (2020) Niloofar Sanaei et al. PROGRESS IN MATERIALS SCIENCE
- Inconel 625/TiB2 Metal Matrix Composites by Direct Laser Deposition
- (2019) Vladimir Promakhov et al. Metals
- Ultrasonic additive manufacturing of bulk Ni-based metallic glass
- (2019) Wenzheng Wu et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Yttria stabilized zirconia (YSZ) thin wall structures fabricated using laser engineered net shaping (LENS)
- (2019) Zhiqi Fan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
- (2019) G. D. Goh et al. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES
- Additive Manufacturing of Mechanically Isotropic Thin Films and Membranes via Microextrusion 3D Printing of Polymer Solutions
- (2019) Manjot Singh et al. ACS Applied Materials & Interfaces
- Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites
- (2019) Bey Vrancken et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
- (2019) Dongdong Gu et al. COMPOSITES PART B-ENGINEERING
- Nanocomposites of PLA containing ZnO nanofibers made by solvent cast 3D printing: Production and characterization
- (2019) R.C. Nonato et al. EUROPEAN POLYMER JOURNAL
- Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace
- (2019) Zhixin Zhan et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Additive manufacturing of SiSiC by layerwise slurry deposition and binder jetting (LSD-print)
- (2019) Andrea Zocca et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon Polymerization
- (2019) Lei Zheng et al. Nanoscale Research Letters
- Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
- (2019) Holly D. Carlton et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy
- (2019) T. Yang et al. SCRIPTA MATERIALIA
- Current Biomedical Applications of 3D Printing and Additive Manufacturing
- (2019) Pouyan Ahangar et al. Applied Sciences-Basel
- The Adoption of Three-Dimensional Additive Manufacturing from Biomedical Material Design to 3D Organ Printing
- (2019) Ajay Vikram Singh et al. Applied Sciences-Basel
- Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts
- (2019) Rong Li et al. Journal of Manufacturing Processes
- Why manufacturers adopt additive manufacturing technologies: The role of sustainability
- (2019) Mojtaba Khorram Niaki et al. JOURNAL OF CLEANER PRODUCTION
- Effect of remelting on microstructure and magnetic properties of Fe-Co-based alloys produced by laser additive manufacturing
- (2019) Xiaoshan Yang et al. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
- Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition
- (2019) C.L. Wu et al. OPTICS AND LASER TECHNOLOGY
- 3D bioprinting of collagen to rebuild components of the human heart
- (2019) A. Lee et al. SCIENCE
- Additive Manufacturing of Precision Biomaterials
- (2019) Elia A. Guzzi et al. ADVANCED MATERIALS
- 3D printed antibacterial silver nanowire/polylactide nanocomposites
- (2019) Ipek Bayraktar et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
- (2019) J.M. Chacón et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Recent advancements in additive manufacturing technologies for porous material applications
- (2019) Subhash Guddati et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Rapid fabrication of TiN/AISI 420 stainless steel composite by selective laser melting additive manufacturing
- (2019) X. Zhao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
- (2019) C. Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of thermal properties on residual stresses in SLM of aerospace alloys
- (2019) Mostafa Yakout et al. RAPID PROTOTYPING JOURNAL
- Densification, Microstructure and Properties of 90W-7Ni-3Fe Fabricated by Selective Laser Melting
- (2019) Junfeng Li et al. Metals
- Experimental investigation of phase change materials fabricated using selective laser sintering additive manufacturing
- (2019) Malek Nofal et al. Journal of Manufacturing Processes
- Residual stress analysis of thin AlSi10Mg parts produced by Laser Powder Bed Fusion
- (2019) Alessandro Salmi et al. Virtual and Physical Prototyping
- Electrohydrodynamic printing of sub-microscale fibrous architectures with improved cell adhesion capacity
- (2019) Bing Zhang et al. Virtual and Physical Prototyping
- Comparison of carbon-based reinforcement on laser aided additive manufacturing Inconel 625 composites
- (2019) Baicheng Zhang et al. APPLIED SURFACE SCIENCE
- 3D printed fiber reinforced polymer composites - Structural analysis
- (2019) M. Mohammadizadeh et al. COMPOSITES PART B-ENGINEERING
- Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder
- (2019) Xinliang Xie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Possibilities of Manufacturing Products from Cermet Compositions Using Nanoscale Powders by Additive Manufacturing Methods
- (2019) Sergei Grigoriev et al. Materials
- Effect of the process parameters in the additive manufacturing of in situ Al/AlN samples
- (2019) A. Riquelme et al. Journal of Manufacturing Processes
- Particle size influence on material properties of BaTiO3 ceramics fabricated using freeze-form extrusion 3D printing
- (2019) Anabel Renteria et al. Materials Research Express
- Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography
- (2019) Se Yeon Song et al. MATERIALS & DESIGN
- Bio-tribological response of duplex surface engineered SS316L for hip-implant application
- (2019) Aniruddha Samanta et al. APPLIED SURFACE SCIENCE
- Ignition and combustion analysis of direct write fabricated aluminum/metal oxide/PVDF films
- (2019) Miles C. Rehwoldt et al. COMBUSTION AND FLAME
- Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials
- (2019) Lourdes D. Bobbio et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of flexible composite drug films via foldable linkages using electrohydrodynamic printing
- (2019) Shuting Wu et al. Materials Science & Engineering C-Materials for Biological Applications
- Analytical modeling of post-printing grain size in metal additive manufacturing
- (2019) Xia Ji et al. OPTICS AND LASERS IN ENGINEERING
- Direct metal laser sintered (DMLS) process to develop Inconel 718 alloy for turbine engine components
- (2019) B. Anush Raj et al. OPTIK
- Towards V-based high-entropy alloys for nuclear fusion applications
- (2019) P.J. Barron et al. SCRIPTA MATERIALIA
- Understanding on toughening mechanism of bioinspired bulk metallic glassy composites by thermal spray additive manufacturing
- (2019) Cheng Zhang et al. SCRIPTA MATERIALIA
- Processability of Atypical WC-Co Composite Feedstock by Laser Powder-Bed Fusion
- (2019) Mohaimen Al-Thamir et al. Materials
- Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content
- (2019) A Yu Churyumov et al. Materials Research Express
- Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview
- (2019) L.E. Murr Journal of Materials Research and Technology-JMR&T
- Sintering regimes and resulting microstructure and properties of binder jet 3D printed Ni-Mn-Ga magnetic shape memory alloys
- (2018) Amir Mostafaei et al. ACTA MATERIALIA
- Novel Materials for 3D Printing by Photopolymerization
- (2018) Michael Layani et al. ADVANCED MATERIALS
- Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer
- (2018) Naga B. Gundrati et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- 3D printing of reinforced concrete elements: Technology and design approach
- (2018) Domenico Asprone et al. CONSTRUCTION AND BUILDING MATERIALS
- Properties of as-deposited and heat-treated Ni-Mn-Ga magnetic shape memory alloy processed by directed energy deposition
- (2018) Jakub Toman et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of anisotropic hybrid NdFeB-SmFeN nylon composite bonded magnets
- (2018) Kinjal Gandha et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Investigation of Solidification and Segregation Characteristics of Cast Ni-Base Superalloy K417G
- (2018) Li Gong et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Hot deformation behavior of an antibacterial Co–29Cr–6Mo–1.8Cu alloy and its effect on mechanical property and corrosion resistance
- (2018) Erlin Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fire reaction properties of polystyrene-based nanocomposites using nanosilica and nanoclay as additives in cone calorimeter test
- (2018) Lubna Ahmed et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets
- (2018) M. Garibaldi et al. MATERIALS CHARACTERIZATION
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
- (2018) Tomasz Kurzynowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved development procedure to enhance the stability of microstructures created by two-photon polymerization
- (2018) Julia Purtov et al. MICROELECTRONIC ENGINEERING
- Micro laser metal wire deposition for additive manufacturing of thin-walled structures
- (2018) Ali Gökhan Demir OPTICS AND LASERS IN ENGINEERING
- Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organisation
- (2018) M. Bhuvanesh Kumar et al. PRODUCTION PLANNING & CONTROL
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Integrated product-process design: Material and manufacturing process selection for additive manufacturing using multi-criteria decision making
- (2018) Uzair Khaleeq uz Zaman et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP
- (2018) Laizhen Jin et al. CERAMICS INTERNATIONAL
- Progress in Additive Manufacturing on New Materials
- (2018) Neng Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Synchronous improvement of the strength and plasticity of Ni-Co based superalloys
- (2018) C.L. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior
- (2018) Chao Cai et al. POWDER TECHNOLOGY
- Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
- (2018) Bandar AlMangour et al. COMPOSITES PART B-ENGINEERING
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanical properties of Zr-based bulk metallic glass parts fabricated by laser-foil-printing additive manufacturing
- (2018) Yingqi Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Polymeric composites for powder-based additive manufacturing: Materials and applications
- (2018) Shangqin Yuan et al. PROGRESS IN POLYMER SCIENCE
- Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: Bridging degree of cure with tensile strength and hardness
- (2018) Yiran Yang et al. MATERIALS & DESIGN
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties
- (2018) Xiaoli Wen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of NdFeB bonded magnets with SrFe12O19 addition
- (2018) Fang Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High strain rate response of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy fabricated by laser additive manufacturing
- (2018) Xiao Zong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
- (2018) Mostafa Yakout et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the characterization of stainless steel 316L parts produced by selective laser melting
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The selection of process parameters in additive manufacturing for aerospace alloys
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In vivo diabetic wound healing with nanofibrous scaffolds modified with gentamicin and recombinant human epidermal growth factor
- (2017) Charu Dwivedi et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication
- (2017) Ling Li et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Laser processing of bulk metallic glass: A review
- (2017) E. Williams et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of Solution Annealing on Microstructure and Mechanical Properties of a Ni-Cr-W-Fe Alloy
- (2017) Meiqiong Ou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Segregation of Phosphorus and Precipitation of MNP-Type Phosphide at the Grain Boundary of IN706 Superalloy
- (2017) Sha Zhang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Influence of building orientation on the flexural strength of laminated object manufacturing specimens
- (2017) D. Olivier et al. Journal of Mechanical Science and Technology
- Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications
- (2017) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- 3D printing of open-porous cellular ceramics with high specific strength
- (2017) Johannes Maurath et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
- (2017) David C. Ackland et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process
- (2017) Omar Ahmed Mohamed et al. MATERIALS LETTERS
- Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
- (2017) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructure on the fatigue crack growth behavior of laser solid formed 300M steel
- (2017) Fenggang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of energy density on metallurgy and properties in metal additive manufacturing
- (2017) Shahir M. Yusuf et al. MATERIALS SCIENCE AND TECHNOLOGY
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Laser polishing of additive manufactured Ti alloys
- (2017) C.P. Ma et al. OPTICS AND LASERS IN ENGINEERING
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene
- (2017) Vinay Deep Punetha et al. PROGRESS IN POLYMER SCIENCE
- Microscale Electro-Hydrodynamic Cell Printing with High Viability
- (2017) Jiankang He et al. Small
- Ferrite-based soft and hard magnetic structures by extrusion free-forming
- (2017) Erwin Peng et al. RSC Advances
- Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
- (2017) Batzaya Byambaa et al. Advanced Healthcare Materials
- Lasers in additive manufacturing: A review
- (2017) Hyub Lee et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Laser additive processing of Fe-Si-B-Cu-Nb magnetic alloys
- (2017) R. Conteri et al. Journal of Manufacturing Processes
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Thin-walled high temperature alloy structures fabricated from additively manufactured polymer templates
- (2017) John H. Martin et al. MATERIALS & DESIGN
- Additive manufacturing of cardiovascular CoCr stents by selective laser melting
- (2017) Ali Gökhan Demir et al. MATERIALS & DESIGN
- 3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration
- (2016) Sha Huang et al. Acta Biomaterialia
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
- (2016) John W. Halloran Annual Review of Materials Research
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Microstructure and mechanical properties of porous alumina ceramic prepared by a combination of 3–D printing and sintering
- (2016) Xiangming Li et al. CERAMICS INTERNATIONAL
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Effect of nanoparticles on the mechanical properties of acrylonitrile-butadiene-styrene specimens fabricated by fused deposition modeling
- (2016) Shuna Meng et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components
- (2016) Runze Huang et al. JOURNAL OF CLEANER PRODUCTION
- Selective laser melting of boron carbide particles coated by a cobalt-based metal layer
- (2016) A. Davydova et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
- (2016) Qiang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
- (2016) G. Miranda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain hardening of Titanium alloy Ti6Al4V sheets with prior heat treatment and cold working
- (2016) R.K. Gupta et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
- (2016) M. Qian et al. MRS BULLETIN
- Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
- (2016) Bing Zhang et al. Nanoscale
- Multiscale metallic metamaterials
- (2016) Xiaoyu Zheng et al. NATURE MATERIALS
- Biomedical titanium alloys and their additive manufacturing
- (2016) Yu-Lin Hao et al. RARE METALS
- A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing
- (2016) Charlotte de Formanoir et al. Materials Research Letters
- The purification of AISI 420 stainless steel in laser solid forming
- (2016) Menghua Song et al. MATERIALS & DESIGN
- Effect of environmental oxygen content on the oxide inclusion in laser solid formed AISI 420 stainless steel
- (2016) Menghua Song et al. MATERIALS & DESIGN
- Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets
- (2016) Ling Li et al. Scientific Reports
- The Roadmap for Additive Manufacturing and Its Impact
- (2016) David L. Bourell et al. 3D Printing and Additive Manufacturing
- Challenges and Opportunities in Design for Additive Manufacturing
- (2016) Carolyn Conner Seepersad 3D Printing and Additive Manufacturing
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Interfacial shear strength estimates of NiTi–Al matrix composites fabricated via ultrasonic additive manufacturing
- (2015) Adam Hehr et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component
- (2015) Huang Chunping et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping
- (2015) I. Kunce et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural control during direct laser deposition of a β-titanium alloy
- (2015) Chunlei Qiu et al. MATERIALS & DESIGN
- The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2015) Yanyan Zhu et al. MATERIALS & DESIGN
- Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys
- (2015) S. Ehtemam Haghighi et al. MATERIALS & DESIGN
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
- (2015) Zhenzhen Quan et al. Materials Today
- High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes
- (2015) Bong Hoon Kim et al. NANO LETTERS
- Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
- (2015) Attilio Marino et al. Nanoscale
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
- (2015) D. Choudhuri et al. SCRIPTA MATERIALIA
- 3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
- (2015) Fu-Yu Hsieh et al. Organogenesis
- Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys
- (2015) R. Liu et al. Scientific Reports
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Additive Manufacture of Ceramics Components by Inkjet Printing
- (2015) Brian Derby Engineering
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles
- (2015) Eric Wycisk et al. Frontiers in Materials
- Recent advances on the development of magnesium alloys for biodegradable implants
- (2014) Yongjun Chen et al. Acta Biomaterialia
- Additive Manufacturing of Ceramic-Based Materials
- (2014) Nahum Travitzky et al. ADVANCED ENGINEERING MATERIALS
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting
- (2014) Vincent Wagner et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS)
- (2014) I. Kunce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
- (2014) Seyeon Hwang et al. JOURNAL OF ELECTRONIC MATERIALS
- Correlation Between Microstructure and Mechanical Properties in an Inconel 718 Deposit Produced via Electron Beam Freeform Fabrication
- (2014) Wesley A. Tayon et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Power prediction for laser engineered net shaping of Al2O3 ceramic parts
- (2014) Fangyong Niu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
- (2014) X.P. Li et al. MATERIALS & DESIGN
- Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
- (2014) Salman Pervaiz et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact
- (2014) Solomon Boakye Yiadom et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy
- (2014) Kaiwen Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties
- (2014) X.P. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing
- (2014) J. Gockel et al. MATERIALS SCIENCE AND TECHNOLOGY
- Options for additive rapid prototyping methods (3D printing) in MEMS technology
- (2014) Victor A. Lifton et al. RAPID PROTOTYPING JOURNAL
- The Programmable World
- (2014) Thomas A. Campbell et al. SCIENTIFIC AMERICAN
- Dip-Coated Gold Nanoparticle Electrodes for Aqueous-Solution-Processed Large-Area Solar Cells
- (2014) Xiaohang Du et al. Advanced Energy Materials
- Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
- (2014) Douglas C. Hofmann et al. Scientific Reports
- High-Entropy Alloys: A Critical Review
- (2014) Ming-Hung Tsai et al. Materials Research Letters
- Zinc in calcium phosphate mediates bone induction: In vitro and in vivo model
- (2013) Xiaoman Luo et al. Acta Biomaterialia
- Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells
- (2013) B. Duan et al. Acta Biomaterialia
- NiTi–Al interface strength in ultrasonic additive manufacturing composites
- (2013) Ryan Hahnlen et al. COMPOSITES PART B-ENGINEERING
- Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
- (2013) I. Kunce et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Selective laser melting of La(Fe,Co,Si)13 geometries for magnetic refrigeration
- (2013) J. D. Moore et al. JOURNAL OF APPLIED PHYSICS
- Fabrication of three-dimensional porous scaffolds with controlled filament orientation and large pore size via an improved E-jetting technique
- (2013) Jin Lan Li et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Processing metallic glasses by selective laser melting
- (2013) Simon Pauly et al. Materials Today
- Electrohydrodynamic direct-writing
- (2013) YongAn Huang et al. Nanoscale
- Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
- (2013) Jan Wilkes et al. RAPID PROTOTYPING JOURNAL
- Fabrication of Biomedical Implants using Laser Engineered Net Shaping (LENS™)
- (2013) Mitun Das et al. Transactions of the Indian Ceramic Society
- Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl
- (2013) Brian A. Welk et al. ULTRAMICROSCOPY
- Adding Value in Additive Manufacturing : Researchers in the United Kingdom and Europe Look to 3D Printing for Customization
- (2013) Jim Banks IEEE Pulse
- Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- In vitro corrosion behavior and in vivo biodegradation of biomedical β-Ca3(PO4)2/Mg–Zn composites
- (2012) Kun Yu et al. Acta Biomaterialia
- Fabrication of porous titanium implants by three-dimensional printing and sintering at different temperatures
- (2012) Yaoyang XIONG et al. DENTAL MATERIALS JOURNAL
- A review on 3D micro-additive manufacturing technologies
- (2012) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- 3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
- (2012) Bin Duan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive manufacturing techniques for the production of tissue engineering constructs
- (2012) Carlos Mota et al. Journal of Tissue Engineering and Regenerative Medicine
- Elevated temperature characterization of electron beam freeform fabricated Ti–6Al–4V and dispersion strengthened Ti–8Al–1Er
- (2012) R.W. Bush et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
- (2012) Xin Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing
- (2012) B Verlee et al. POWDER METALLURGY
- Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu–Zn alloy processed by equal-channel angular pressing
- (2012) Z.J. Zhang et al. SCRIPTA MATERIALIA
- Toward engineering functional organ modules by additive manufacturing
- (2012) Francoise Marga et al. Biofabrication
- Bioprinting of growth factors onto aligned sub-micron fibrous scaffolds for simultaneous control of cell differentiation and alignment
- (2011) Elmer D.F. Ker et al. BIOMATERIALS
- Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
- (2011) Ralf Gaebel et al. BIOMATERIALS
- Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
- (2011) Roberto Gaetani et al. BIOMATERIALS
- Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
- (2011) E. Yasa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser solid forming Zr-based bulk metallic glass
- (2011) Gaolin Yang et al. INTERMETALLICS
- Improvement of cyclic durability of Ti–Cr–V alloy by Fe substitution
- (2011) Masakazu Aoki et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology
- (2011) Baicheng Zhang et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Quantification of surface roughness of parts processed by laminated object manufacturing
- (2011) Daekeon Ahn et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High-Temperature Oxidation Behavior of a Ni-Cr-W-Al Alloy
- (2011) Y.C. Ma et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions
- (2011) Yoram de Hazan et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying
- (2011) S. González et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys
- (2011) Hamid Reza Bakhsheshi Rad et al. MATERIALS & DESIGN
- Metallic glasses from “alchemy” to pure science: Present and future of design, processing and applications of glassy metals
- (2011) Eugen Axinte MATERIALS & DESIGN
- Effect of Solution Temperature on the Microstructure and Mechanical Properties of a Newly Developed Superalloy TMW-4M3
- (2011) Zhihong Zhong et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser sintering of polyamides and other polymers
- (2011) R.D. Goodridge et al. PROGRESS IN MATERIALS SCIENCE
- In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review
- (2010) Y. Xin et al. Acta Biomaterialia
- Three-Dimensional Nanostructures for Photonics
- (2010) Georg von Freymann et al. ADVANCED FUNCTIONAL MATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
- (2010) J. N. Li et al. JOURNAL OF MATERIALS SCIENCE
- Regeneration of the articular surface of the rabbit synovial joint by cell homing: a proof of concept study
- (2010) Chang H Lee et al. LANCET
- Laser processing of Fe-based bulk amorphous alloy
- (2010) Vamsi Krishna Balla et al. SURFACE & COATINGS TECHNOLOGY
- Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP)
- (2010) P K Wu et al. Biofabrication
- 3D Powder Printing of β-Tricalcium Phosphate Ceramics Using Different Strategies
- (2009) E. Vorndran et al. ADVANCED ENGINEERING MATERIALS
- Processing of Bulk Metallic Glass
- (2009) Jan Schroers ADVANCED MATERIALS
- Human microvasculature fabrication using thermal inkjet printing technology
- (2009) Xiaofeng Cui et al. BIOMATERIALS
- Scaffold-free vascular tissue engineering using bioprinting
- (2009) Cyrille Norotte et al. BIOMATERIALS
- Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
- (2009) S. Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Direct Inkjet Printing of Dental Prostheses Made of Zirconia
- (2009) J. Ebert et al. JOURNAL OF DENTAL RESEARCH
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Smart structure sensors based on embedded fibre Bragg grating arrays in aluminium alloy matrix by ultrasonic consolidation
- (2009) Chengbo Mou et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Micro-injection moulding of polymer microfluidic devices
- (2009) Usama M. Attia et al. Microfluidics and Nanofluidics
- Stereolithography fabrication and characterization of syntactic foams containing hollow glass microspheres
- (2009) T Roques-Carmes et al. RUSSIAN CHEMICAL REVIEWS
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication
- (2008) Wonhye Lee et al. BIOMATERIALS
- Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
- (2008) Vamsi Krishna Balla et al. International Journal of Applied Ceramic Technology
- Slurry deposition by airbrush for selective laser sintering of ceramic components
- (2008) Anja M. Waetjen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Bond strength development between concretes of different ages
- (2008) H. Beushausen et al. MAGAZINE OF CONCRETE RESEARCH
- Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
- (2008) M. Turker et al. MATERIALS CHARACTERIZATION
- Early effect of Ti–24Nb–4Zr–7.9Sn intramedullary nails on fractured bone
- (2008) Z. Guo et al. Materials Science & Engineering C-Materials for Biological Applications
- Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
- (2008) Karoly Jakab et al. TISSUE ENGINEERING PART A
- Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing
- (2008) Natalja E. Fedorovich et al. Tissue engineering. Part A
- Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
- (2007) Rachel E. Saunders et al. BIOMATERIALS
- Structure and hardness of surface of Al18B4O33w/Al composite by laser surface melting
- (2007) J. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle- and Bone-Like Subpopulations
- (2007) Julie A. Phillippi et al. STEM CELLS
- Synthesis, phase transformation, and hydrogen storage properties of ball-milled TiV0.9Mn1.1
- (2006) J. Huot et al. JOURNAL OF ALLOYS AND COMPOUNDS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now